Problem with to import Chart of Accounts through DTW

Hi
I am using DTW to import Chart of Accounts in SAP B1. in CSV file in ACTIVE ACCOUNT field ,i set tNO.
while importing through DTW its giving error: " is not a valid value for field 'Postable' .The Valid Values are : 'Y' -'Active Account' -'N'. "
Thanks in Advance
Rupinder

You can check this thread to see if it helps:
Re: Import G/L Title Accounts Through DTW?
tNO means title account. Is it what you are uploading?
Thanks,
Gordon

Similar Messages

Importing Chart of Accounts using DTW

Dear Sir/Madam,
I've a problem While importing chart of accounts, I get error like
"illegal parent number Application -defined or Object-defined Error65171"
I'm using SAP Business One 2005 B (7.40.252) SP: 00 PL: 32
I kindly request you to provide me a solution as early as possible.
Regards,
Murali

Murali,
I believe you has posted this question earlier too. Please check my reponse to that. I have sent the details to your email
Suda

Import Chart of Account via DTW - field ReconciledAccount doesn't work

Hi all,
I'm importing Chart of Accounts (segmented) via DTW.
I want to set the SAP LocManTran field to YES
so in the Excel file, I populate the ReconciledAccount field with tYES
The importation works fine but the SAP LocManTran field is not ticked after the import
Someone could help?
Thanks in advance
Christian

Hi Christian,
ReconciledAccount is the field RealAccount. There is LockManualTransaction in the template you should set tYES.
Thanks,
Gordon

Cannot import chart of account via DTW

Hi experts,
I have read a lot posts regarding my dtw message, but no success.
"The namespace of element must be from the schema namespace"
If You can see whats wrong,then thank you in advance. Here are some rows of my txt file.
Code     Name     ActiveAccoutNOt     FatherAccountKey
AcctCode     AcctName     Postable     FatherNum
11000000     Immateriális javak     tNO     10000000
12000000     Ingatlanok és kapcsolódó vagyoni értékű jogok     tNO     10000000
13000000     Műszaki berendezések, gépek, járművek     tNO     10000000
21000000     Alap- és nyersanyagok     tNO     20000000
22000000     Segéd- és egyéb anyagok     tNO     20000000
23000000     Befejezetlen termelés és félkész termékek     tNO     20000000

Hi,
Leave code field as blank.
both the lines should same header.
try in below format:
Code accountType ActiveAccount FatherAccountKey
Code accountType ActiveAccount FatherAccountKey
and also check Re: DTW template of COA thread
thanks,
neetu

Import chart of account

when i import the chart of account through DTW i got an error that is Data is too large for the fieldoChartOfAccounts please help me i am stuck there

Hi,
<<OACT-Chartof accounts>> This is the template for importing the Chart of Account.Place the cursor at top of every column in .exl sheet and you can find here the length and type for every column.Here you can check which column has large than allowed.
Regards
Deepak tyagi

TS3276 I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails to people in my address book. Hotmail advised me to change my password for that account, which I did. Why won't mail recognise the new password?

I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails from my address book. Hotmail advised me to delete all contacts and change the password for that account, which I did on my laptop running windows XP. The change was successful and I was able to send and receive emails with no problem. I then had to change the account password on my iPhone 4s, which I did and it too was successful but when I came to change the password on my iMac, running the latest version of Lion it would not recognise the new password. I have tried to remove the account details and re-install but every time I go to add new account my old details are in the box. This is very frustrating as I use my iMac for all my profects and I need to access my email. Please help.

hi guys,
I had already deleted all reference to the hotmail account in question from the keychain access app, I have also tried to delete and re-instal the account details from within mail. The icon in the side bar dissapears but when I go to Add Account, the old account details are in the new account box. I then input my new password but am told that the server does not recognise it. If I access hotmail via google on the iMac I can get into my account with no problems. I am thinking there must be some other form of security system within the mac software that is blocking the new password. This is driving me nuts. I have been trying to resolve this for the last two days. Thank you for your advise anyway.

Problem with export / import

Hi everybody, I am having a problem with an import. I am doing an export with a value in an user exit:
EXPORT V_NLQNR = V_NLQNR TO MEMORY ID 'QUANTL'
And after I call import in another program:
IMPORT V_NLQNR = V_NLQNR FROM MEMORY ID 'QUANTL'.
But when I check the sy-subrc I am getting 4, so I don't get anything.
Does anybody why?? Is there a problem if I call the export from an user exit??
Thanks in advance.

Hello,
I think you have the right idea.
As a suggestion I would name my variables to make it clear which data is being
exported/imported. I would also use different names on the left and right side of the = sign.
Here is a working example from programs that I use:
In the first program
   EXPORT intercodata FROM g_data_exp TO MEMORY ID 'INTERCOWOS'.
     where g_data_exp is declared as a global variable
In the second program
   IMPORT intercodata TO g_data_imp FROM MEMORY ID 'INTERCOWOS'.
     where g_data_imp is declared as a global variable
The syntax that you use ( p1 = dobj1 ) should work as well, just make sure that the variable v_nlqnr to the right of the equal sign has a value before the export.
Regards
Greg Kern

After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?

After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?

I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect

Strange problem with App Id on developer account

Hi,
I have very strange problem with App Id on developer account.
We have uploaded one project with App Id(com.yourcompany.app) and its ready for sale now. Now we have to release update for this application but we could not find that App Id(com.yourcompany.app) on developer account. But strange is that i could not see delete option for App Id.
If i try to create new App Id with com.yourcompany.app name then it shows that it is already being used please select any other name.
Does anyone has faced this type of problem.
Regards,

You shouldn't need to enter the App Id when updating your app. Could you please describe the page in which you're asked for the App Id, and describe how you got to that page?
For example, if I wanted to update Version 1.2 of Ray'sApp, I would log into ITC, then click on +Manage Your Applications+ to get to the "Manage Your Applications" page. On this page I see the icon for every app I have in the store. I then click on the icon for Ray'sApp 1.2 to get to the page titled "Ray'sApp". Next I click the 4th selection to the right on that page: +Update Application+, click No and Continue on the "Export Compliance" page, and get to the "Upload Application" page. On that page I fill in Version Number: 1.3, Language English, Name: Ray'sApp, Keywords ..., What's New in this Version: ..., and the Apple Content Descriptions table. Then I upload the binary.
Following the above example, show us how you got to a step that requested the App Id. Else you might refer to Page 86: Version Updates in the iTunes Connect Developer Guide. In that case, please explain how your update experience differed from the steps in the Guide.
\- Ray

Error while importing Item Master data through DTW

Hello Expert,
I trying to import item master data through DTW but it gives an error while importing as shown in attach file..
Please help me...
I am using SAP 9.0 Pl 6
Regards,
Sandy

Hi Sandy,
Kindly follow the check list
1. Right Click DTW and run it as Administrator.
2. Is your DTW version is same as SAP B1.
3. Uninstall and re-install DTW.
4. If you are using 64-bit DTW, try to use 32-bit one.
5. Check the Template, is it of the same DTW version.
6. Remove all the unnecessary columns.
7. Last try different Template extension.. (e.g: CSV (Comma delimited), or Text (Tab delimited))
Hope you find this helpful......
Regards,
Syed Adnan

Import goods recipt PO through DTW

hi expert,
i want to import goods recipt PO through DTW .is it possiable in SAP B1 to import GRPO data through template?which template shuld i use and how.Please give me detail about it
I want add GRPo of the having in stock
reagrd sachin
Edited by: Darius Heydarian on Apr 19, 2008 1:25 AM

Hi Sachin,
Try this,
In the Documents Template enter
Record Key     CradCode       DocDate (Record key should be the latest one)
In the Documents lines Template enter
Record Key (the same u entered in the Documents template)   LineNum ( linenum should start from 0 to onwords) Currency ItemCode Price   and Quantity
In the Batch Numbers Template enter
Record Key ( the same as u entered in the Documents Template) linenum (should start from 0 to onwords) BaseLinenum (linenum of document lines template) BatchNumber and any additional information if desired.
Its example is like this.
Documents Template,
Record Key     CardCode         DocDate
1                     S0012              4/19/2008
Documents Lines Template
Record Key     LineNum        Currency          ItemCode        Price      Quantity
1                     0                   USD                A1002            250         100
1                     1                   USD                A1003            150         150
In the Batch Number Template,
Record Key      LineNum        BaseLineNum   BatchNum
1                     0                    0                     BA001
1                     1                    1                     BA002
I hope it will help you.
Regards,
/Siddiq

Import AR Reserve Invoice through DTW

Dear all,
We are on SAP B1 2005A PL50.
Is there any template to import AR Reserve invoice through DTW?
Thank you & Kind Regards,
Asif

Check this threads
A/P Reserve Invoice Template
DTW - Upload of Reserve Invoice
Edited by: Jeyakanthan A on Aug 4, 2009 8:55 PM

Problem with the imported video clips

Hi! I'm very new to Premiere Pro, so please don't scold me :)
I have a video file (.AVI) that I want to remove the audio from, and insert a new audio track.
Here's my problem: When I import the AVI file into Premiere, and double-click it to preview it, it is really glitchy. The video is 1 minute long. During ~5 seconds in the very beginning, the whole video's "video" track is played, extremely speeded up (It plays through it all). The rest of the video consists of a freezed frame, and the audio is played in normal pace.
I do not know which codec the AVI-file is encoded with, is this relevant?
When I restarted Premiere the first time, it told me that it had to download codecs. I pressed OK and the codecs was downloaded and installed okay, but the problem remains.
I copied the .AVI-file directly from my camera (Canon IXUS 700 I believe).
When I play the original AVI file with VLC, everything runs perfectly with audio and video.
I'm totally clueless, anyone have a clue how I can solve this?
Any help at all appreciated, thanks in advance!

>I do not know which codec the AVI-file is encoded with, is this relevant?
Very relevant. Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Problem with the importing wizard

Hei,
I have a dll which I want to import to the Labview project. So, I decided ti use the import wizard, but when parsing the header file, Labview freezes. I am using a couple of structures (3) and a handle. I have also read that the wizard has problems when dealing with complex data. What would be best solution for adding it to the project? To in a way "unbundle" the struct and then create a many simple variables and then parsed to dll. (This would be a pain)
How to deal with the handle or will wizard easy understand that?
I am really looking for a painless solution
thanks for the help

Can you post the header file for the DLL?
Through a process of trial and error you could determine which functions causes problems with the wizard (comment out half the functions, attempt to import, repeat) and then manually create the LabVIEW VIs for the troublesome ones. If there aren't too many functions, you could do it all by hand, which isn't that hard if you have some understanding of C (and if you don't, you'll undoubtedly have other problems when the wizard doesn't do the right thing).

House Bank number problem with BSP import

Hi,
I have a problem when i import an bank statement that i get an error that the house banknumber is not the same as in de import file. I believe the problem is that in de house bank definition in SAP there are dots (.) between the housebank number like 12.56.58.789 and in the import file on row :25 there are no dots between the number 125658789. Does anybody know how to solve this problem ? i tried something with the add-on format definition and find out that the field "AccountInfo" need some changes.
The expression that is used in the bfp file is (?<=:25:)[^\r\n]*(?=\r\n)
Can somebody help me?
THANKS
Mark

Hi Mark,
The rule for importing data from a bank statement is that house bank account defined in B1 and the data filled into account number field should match bit by bit. So in your case there are two options:
1. change the account number definition in B1 to remove all the dots.
2. if that's impossible, you have to change the BFP file via Format Definition add-on to insert the dots into the pure digit series. that could be done by assigning a mapping method to the account number field.
use concat() function and substring() function together. about the usage of the function ,you can refer to the online help of the tool.
Cheers,
Tedy

Problem with to import Chart of Accounts through DTW

Similar Messages

Maybe you are looking for