Problem with to many computers in there system Bob S

I am having trouble downloading some of my songs i tunes is telling me that I have to authorize the song and when i do it tells me that i can only authorize 5 computers I oly have three? how do you deauthorize two of them?

Store > View My Account > Deauthorize All, then reauthorize the computers that you want to use. You can't use that tool again for another year.
See also: HT1420 iTunes Store: About authorization and deauthorization
tt2

Similar Messages

The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

I have a problem with Java and an e-procurement system integrating

I use an e-procurement system at work and yesterday I could not get my parts list from the suppliers web site to display in our in-house eprocurment finance package.
There is not a problem with the finance package. There is not a problem with the suppliers web site. I have verified both of these by other colleagues being able to complete what I am trying to do.
The difference between my version of Firefox and my colleagues' is that I am on version 6.0.1 and they are on 6.0.
I have had problems with Java not displaying certain animations on the suppliers web site but, my colleague does not and I am suspicious that this is the problem. Can anyone verify this please and what can I do about it. My Java updates are up-to-date as of yesterday and are automatic.
Thanks.

I was quite amazed I never got a reply to this, in the past people here have been helpful. In any case I was finally able to enter this website on the exceptions list in the Java panel, and I believe it is okay now.

Problem with AddRow() in custom matrix on System Form

Hello all,
I'm trying to add 1 row to a custom matrix on a system form (Sales Quotation).
However I always get a RPC_E_SERVERFAULT exception when calling pMatrix.AddRow() and SBO crashes...
My code is simple:
        [B1Listener(BoEventTypes.et_CLICK, false)]
        public virtual void OnAfterClick(ItemEvent pVal)
            Form pForm = B1Connections.theAppl.Forms.Item(pVal.FormUID);
            // Add matrix line
            Matrix pMatrix = (Matrix) pForm.Items.Item("MATRIX").Specific;
            pMatrix.AddRow();
            // Set matrix line data
The matrix shows ok in the system form, inside a new folder.
What is the problem with my code?
Is there any way to add rows to a custom matrix in a system form?
This code runs ok if executed in a custom form...
Thanks!
Manuel Dias

hi.
R u facing any problem ...
actually add row and del row both are same.
in normal customization form and system form matrx...
Any problem are u facing...

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting.
(10.4.10)
Use Software Update to update your OS to last version of Tiger. Install all the other updates that goes along w/it.

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

I have purchased my iPhone 4S from USA. Its a Factory unlocked phone. I am facing problem with the hardware. Is there any support that apple provides to send the phone from India to USA to get it replaced? Also if there is any travelers Policy?

I have purchased my iPhone 4S from USA. Its a Factory unlocked phone. I am facing problem with the hardware. Is there any support that apple provides to send the phone from India to USA to get it replaced? Also if there is any travelers Policy?

No and no.

I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart

I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart. Printer is Hp Photosmart c5180

This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Early 2011 Mac Book Pro (MBP) problem with sporadic AMD GPU automated switching system

I have an early 2011 Mac Book Pro (MBP) - specs are listed below. I have read online about other 2011s having an automatic shutdown problem & sporadic failure re the graphics AMD Radeon HD 6490M GPU automated switching system (among other problems with this "innovation" by Apple). I am having this problem: Shuts down by itself. Restarts - in the middle of the restart shuts down again. Fans are operating just fine. The problem has occurred if a video is playing, if I try to edit a video. It has occurred while using Skype (if the other party puts on their video camera), Firefox & Safari & Google Chrome. It has occurred even if I was working in Word if I was connected to the internet. I am working in a developing country and I have done a PRAM SMC Disk Utility Repair disk had a diagnostic run which showed no problems, etc.There is no temporary fix. Apple now hear this: This is going to morph into a logic board problem and you still haven't done anything about it??? This is an APPLE defect and I am very disappointed in Apple not acknowledging this defect and fixing the problem or issuing notification of a recall. I am outside of Apple Care and I have never had a mac give trouble until the 5 year mark. A 2GB RAM white iMac I gave my Mom is still operating perfectly! I am in the middle of a climate change mitigation project and a I cannot finish my work due to this problem and I cannot afford to pay for another MBP $2400 doorstop. What is going on here? Steve dies so there is no one to put the fear of God in anyone at Apple anymore and now no one cares about customer service? Where is the product recall? I have been a loyal Apple customer since 1983. Yes, 1983. DO SOMETHING NOW APPLE & NOTIFY US OF IT - We all registered our computers on YOUR website so you know who we are. Has anyone filed a class action yet?
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro8,2
Processor Name:    Intel Core i7
Processor Speed:    2 GHz
Number of Processors:    1
Total Number of Cores:    4
L2 Cache (per Core):    256 KB
L3 Cache:    6 MB
Memory:    4 GB
Boot ROM Version:    MBP81.0047.B27
SMC Version (system):    1.69f4
Hardware UUID:    9DCDDE07-1E9D-5E1B-81EF-DDAC9000FF
Storage Capacity: 500 GB

I had a 13" mid-2012 that had three logic boards fail in less than a year of purchase. My symptoms were it would freeze while using it or after it was put to sleep. When it froze while being used, it would flash pixels in groups in different colors and would become unresponsive to everything but forcing it to shut down. If it froze while sleeping, it wouldn't wake up and it would get extremely hot to the touch. Apple covered the repairs every time but they sent me receipts and each time, it was a $480 logic board plus labor so it would cost about $530 overall. It sounds to me it's your hard drive because I also experienced two hard drive failures. First time was from an accidental drop. I would get a loading bar on startup and once it finished, it would shut down. I couldn't boot into recovery mode at or do anything. But before that would happen, I would get an error in disk utility after performing a disk repair saying it couldn't repair the disk and to back up as much data as I could. Luckily I have the Time Capsule so my data was always safe.

Problem with fibre channel card and raid system after upgrading to 10.4.7

Hello, I have a problem with our Xserve G4 DP. After the installation of 10.4.7 everything works fine exept our fibre channel card. This card is connected to a Hitachi Raid System which worked fine over a year. But after the update the volume was no longer mounted. I even reinstalled the server to 10.4.4 and no sign of our raid volume. Using the apple fibre channel utiltiy 2.0, I see that there is a connection - but still the raid volume is not mounted. When I restart the server the lights on the back of the card are shortly flickering and sending some packets to the raid system but that´s all. Has anybody an idea?
Greetings from Heidelberg
Klaus
Xserve G4 DP 1 GHz Mac OS X (10.4.6) Mac OSX Server 10.4.7

You could re-update, by downloading the 10.4.7 Combination Updater from Apple.

Problem with BPS Reports after upgarding the system to BI.7

Dear Experts,
We are facing problem with the BPS Reports after upgarding the system to BI.7
In 3.5system the reports are dispalyingthe data.
we have copied the production system to X system and has migrated the same to BI.7.
in the X system the reports are not showing the data and even we generated the web interfaces in X system.
After giving the input to BPS Layout and when we go for output ,we are getting the message No Data has been found.
when we chekced the corresponding cube data was existing.
It would be a great help if any valuable suggestions to over come the problem.
Regards,
Sunil...

Dear Andrey,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code has not been maintained for the sales documnet 1296".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

Problem with OEM backing up on windows system.

Hi to all,
I have a problem with backing up with a specific user.
I am currently running various "test" db's and am planning to back them up.
The Setup:
Host OS is windows 2003 server s2
Grid control 10.2.0.1
Database 10.2.0.2
Target Db is running on a windows 2003 server
The Situation:
From grid control I locate the db in question and go to the maintenance page and the backup settings. First of all I want to test the backup using the tab. Before this of course I enter the Host OS credentials into the system, let’s say "jamie", and add the appropriate password. By this point I have made sure that the user "jamie" is in the local security policy setting "log on as batch job" and that is in the group ora_dba (This is on both the machine I am backing up from and the target db machine.). For security reasons I have limited the share folder location to the user "jamie", making sure that sharing and security has the appropriate privileges to access the share.
I run a test backup using the tab within backup settings and await the results. The results come back unsuccessful. Reading through the log I see that the path to backup share is denied.
So to further the test I change the privileges within the share to "everyone" and that is for both sharing and security, just to see whether or not it’s the path itself rather than restrictions to the user. It is then a success. I checked to see who actually owned the file that was used within the test. It belonged to the local system on the target db, not to the user that I had specified within "Host OS Credentials".
Can anyone explain to me why and what is the reason behind putting in Host OS Credentials when the agent that is committing the back up is using the local domain system user account. I am aware that the Agent is part of a service within windows and belongs to the local domain. Ergo, why have host credentials.
And can anyone help me out with getting round this predicament if I still want security within the systems. I can’t just leave access to the share under "everyone", that'd be a really big hole in the system?!
Any help at all will be gratefully received.
If you’ve got any questions to help me solve the problem, please fire away.

You may want to take a look at these metalink notes:
Ref.
Subject:      ERROR in RMAN to Write to Shared Drives on Windows NT/2000
     Doc ID:      Note:246107.1      Type:      PROBLEM
     Last Revision Date:      08-JUL-2004      Status:      PUBLISHED
Subject:      How to Configure RMAN to Write to Shared Drives on Windows NT/2000
     Doc ID:      Note:145843.1      Type:      BULLETIN
     Last Revision Date:      21-OCT-2005      Status:      PUBLISHED
~ Madrid
http://hrivera99.blogspot.com/

Msg.. cvn.GSD.ConsoleService is undefined.. Everything very slow...mouse does not respond properly finally crashes...Had no problem with 3.16. Windows XP system.

I receive the cvn statement on start up of Firefox 4... As soon as you sign on problems start.. Everything slows down. Conflicts and mouse start to act up... cannot get off of the page... cannot makes changes etc... I tried downloading new firefox 4 and throwing away firefox 3.16 but this made things worse... Now I do not have the old firefox and can not use the Firefox 4. I do not know what is causing the conflict. I do have earthlink as provider and I do know that you isolated until the last change in 3.16,,, Could be problem with earthlink not being compatible..but I had problems bringing up this site to send you info on my problem. I hope you can review and come up with some corrections in Firefox 4... If not please send me some way that I can put the old Firefox 3 back on my system. I miss the protection and use of Firefox.... Thanks Ron

'''cvn.GSD.ConsoleService is underfined problem still Exists. I note that 3 others have the same problem. I am working around the problem by clicking off the warning. This does not solve the issue but allows me to use Firefox until everything slows down. I have noticed that I also receive this msg when I try to use Microsoft Office Excel and similar programs. Please let me know if anyone finds a solution or you are able to update Firefox to avoid this problem. Thanks'''

Problem with InputSelect Data Tag if there is no register in database

Hello all,
I4m working with Oracle JDeveloper 3.2.2 and I have a problem with InputSelect Data Tag.
When I tried to access a JSP page with this object and there was n't a record at the table, an error occurred.

All the input tags operate on rows in the cache. Prior to using the input tags, use the Row tag with the 'Create' option to make sure you have a valid row.

Problem with Music for an Car Audio System

Hello,
first I want to apologize for my bad english, because i come from Germany
I have a Problem with my MacBook Pro 2011 and the file transfer (music) on a USB stick.
Whenever I copy music on a USB, everything is copied twice and the second File is copied with an "." previously.
My car detects the files as broken.
Can anybody help me pls???

First try creating a folder or folders to put the music in. Drag the folder to the USB.
See if this helps.
The "." means a hidden file. Does you no good.

Problem with to many computers in there system Bob S

Similar Messages

Maybe you are looking for