Problem with TOC levels (Bug?)

Hi!
Im using Layout -> Table of contents to generate the TOC for my magazine. My pages basically have two paragraph styles that will be used in the TOC window. They are Section and Tittle, and are defined as paragraph style and well syncronized with the other articles of the magazine, im using a book to organize the files.
In the Window of TOC a choose for the first style Section pragraph style and add to the include paragraph style, next it's added  tittle paragraph style  to the include paragraph style.
Im getting
Tittle1.......................3
Section1
Tittle2......................4
Section2
INSTEAD OF
Section1
Tittle1.......................3
Section2    
Tittle2......................4
Section style box is in level 1 and Tittle style box is in level 2 in TOC window. It make senses to me, when im defining the paragraph styles for TOC, but is different from what i expected.
It's a Bug on the CS4 for Windows ? Anyone have a problem similiar ?
Thanks

It was the relative position of the section to the tittle frame. Thank you very much!
The Section was in the right corner of the page and the tittle was centered in the midle of the page.
I have made that because the layout of my magazine has the sections on the upper right.
I will have to create a hidden layer in the upper left of the page to solve the problem.
Do you have another solution, or a more elegant solution to solve this situation in particular ?
thank you very much!
best regards

Similar Messages

  • Problem with Revision level for a Material

    Hi All,
    I have a problem with Revision Levels for a Material.
    I want to know the Revision Level for a particular Material for BOM Creation.
    Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
    <REMOVED BY MODERATOR>
    Thanks and Regards,
    Harish Kalla
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

    HI,
    You can use table AEOI.
    Hope this helps.
    <REMOVED BY MODERATOR>
    Regards,
    Sipra
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

  • I am using ios 7.1 but I still having problems with the level, how can it be solved?

    How to solve the problems with the level?

    The level that we have in the compass app, it still shows me -2

  • Weird problem with ToC/Story Editor

    Hi all,
    I write the documentation for a software package. Recently the package has had two new add-ons that require their own manuals, so I reused my original doc and cleared it out to use for the new packages. All good so far until I want to do the ToC. In the original docs, each bit is split into its own story editor, but with the new manuals everything is all in one story and I think that is causing problems with the ToC because sometimes I'll get sections with nothing in them while other Sections have too many subsections. I've been through and checked my styles, but the only way around it right now is to view the ToC in the Story Editor and drag/drop the subsections to the right places. Right now these new manuals are not even 30 pages each, with four or five sections but this is not a tenable situation. I use InDesign 5.5 under Windows. Anyone got any idea? Obviously more detail can be provided.
    Thanks in advance,
    B

    It looks the same and all the text is still in one Story. Can I split stories?
    B

  • Problems with Second level drop downs

    Hi, I'm having problems with the second level of my drop down
    menu. It's showing up when you hit the first level. Any ideas what
    I'm doing wrong?
    http://www.graphicvisionsinc.com/test/

    Solved it!
    For info, updating from FCS 1.1 to FCS 1.1.1 solved this problem!

  • Problems with Item level access rights

    I am having problems with a page group I created. I have applied item level security to an item on a page, managed by me and viewable by one access group. I then created multiple users and signed in as one user who was not in the access group to see that item. When I navigated to that page, I could see the item. When I restricted access to the tab on the page, I could not see the tab, so that worked. But when I opened access to the tab, I could still see the item.
    Here are my settings:
    Page Group Properties: Display Page To Public Users checked and Enable Item Level Security checked.
    Page Properties: Display Page To Public Users checked and Enable Item Level Security checked.
    Tab Properties: Specify Access Settings checked and added all of the appropriate groups with view access.
    Text Item Properties: Define Item Level Access Privileges and managed by me and viewable by one access group.

    I am having problems with a page group I created. I have applied item level security to an item on a page, managed by me and viewable by one access group. I then created multiple users and signed in as one user who was not in the access group to see that item. When I navigated to that page, I could see the item. When I restricted access to the tab on the page, I could not see the tab, so that worked. But when I opened access to the tab, I could still see the item.
    Here are my settings:
    Page Group Properties: Display Page To Public Users checked and Enable Item Level Security checked.
    Page Properties: Display Page To Public Users checked and Enable Item Level Security checked.
    Tab Properties: Specify Access Settings checked and added all of the appropriate groups with view access.
    Text Item Properties: Define Item Level Access Privileges and managed by me and viewable by one access group.

  • Aperture 3 : recurring quality problems with "auto levels"

    Hello all,
    I've been using Aperture 3 since the day of its release, and I have recurring problems with the quality of the "auto levels" output, compared to plain old Photoshop CS3. Auto-levels in Aperture 3 frequently output grainy results.
    Here are some samples (look at the central vertical darker part of the image) :
    — original image (well, part of it) shot using my Canon EOS 400D :
    http://plainsong.online.fr/aperture/Original.jpg
    — the same original image with "auto levels" applied in Photoshop CS3 :
    http://plainsong.online.fr/aperture/Auto-levels-Photoshop.jpg
    — the same original image with "auto levels" applied in Aperture 3.0.1 :
    http://plainsong.online.fr/aperture/Auto-levels-Aperture.jpg
    And here are both "auto-levelled" images zoomed in for convenience's sake :
    http://plainsong.online.fr/aperture/Auto-levels-Photoshop-ZOOM.jpg
    http://plainsong.online.fr/aperture/Auto-levels-Aperture-ZOOM.jpg
    I would like to know if I'm the only one to get such crappy results in Aperture, on a not insignificant number of photos. These poor results are very visible in some photos. This is really irritating, because this lack of quality means I have to open those images in Photoshop just to apply auto-levels. And I thought Aperture would be smart enough to spare me those round-trips!
    (By the way I've never had this kind of quality problems in Photoshop.)
    Please share your experience. Thanks!

    Here is another example :
    http://plainsong.online.fr/aperture/Example2.jpg
    Aperture auto-levels seem to choke on dark areas. Will we be obliged to bright and sunny shots ?

  • Problems with signal level around the house ????

    Hi Guys,
    I have had my BT Home HUb 2.0 for just about a month now and after having very little luck with my new laptop which i have replaced twice and am now on my 3rd (Samsung) all working well, i am still having problems with using my laptop with the home hub about my house.
    I have strong signal downstairs obviously cause that is where home hub is situated, and it is central to the layout to the house, but if i take my laptop upstairs i have no signal again, i say again as when i first fitted home hub i had good signal upstairs of 3/4 bars. I have tried changing the channel and have found that channel 11 is the one for here.
    The only thing i can put it down too is that the other day i tried to get the router set up no more than 5 feet from where it is now as i am also trying to get my old pc tower to work from it too (pc tower has no internal wireless card so have a wireless adapter) but signal again is very poor, since i tried that and also laptop has manufacterer update for a new driver to be installed which i installed which was for the wireless facility on laptop ( which since i have done a system restore ), since all of this i have struggled to get strong signall all around the house only in fromt room as hub is situated in hallway next to front room.
    Please help, as i am not having very muchg luck ???
    regards
    joe-sud

    Other external interference maybe.
    I had a problem last year with my car remote transmitter not working unless within a few inches of the drivers window.
    Using a radio scanner, I found a signal on the same frequency that my remote uses.
    After eliminating all other possabilities, including total power down of our house to eliminate ANY of our equipment, I contacted Ofcom http://www.ofcom.org.uk/complain/inter/intbr/ and made a formal complaint.
    A few days later the investigator arrived with some really hi tech scanning gear, and within 5 mins had identified the scource was eminating from next door.
    He found the culprit....next door had a Sky remote extender which had gone faulty, and was flooding the area with a constant signal.
    There is no charge for this service as long as its not your own equipment, which is why I powered off the whole house to see if the problem persisted.
    Maybe you could use an extention lead from next door to power your router while turning your mains off to check?

  • Problem with TOC pages and books

    I'm using RH 8 and generate Webhelp.
    I created a project and had to change some TOC pages and create TOC books instead. I deleted the pages and added books, with the same name. In RH it looks fine but when I generate the TOC displays the page instead of the book. I tried deleting my cache in IE and deleting the page again. Still no help. I rebooted, and even restarted and still got the same thing. Can anyone tell me how to fix this?
    Thank you.

    Hi there
    If the page is not actually inside of a Book, the WebHelp generation process will sense that.
    If you want a Book, try right-clicking the page in the TOC editor and choose "Create Book from Page". This should create a book with the page inside it. Of course both will have the same name, so you may need to rename the Book. Or rename the page. Your choice.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Problem with TOC

    I made 2 styles
    titles of lessons
    titles of sections.
    I created a table of contents (TOC) using the styles, however half of the titles do not show.
    I checked all titles styles to be sure they are using the appropriate ones and they are.
    Here is the automatic table missing several titles. What is doing this. I had no problem in CS4 ever and since I have CS5 this problem has appears in several projects.
    Here is the table the way it should look.

    If it's a conversion issue, it usually works better to do the export from the original version, rather than to wait and try the export from CS5 after editing. I've gotten into the habit of exporting all complex files to .inx in the original, then opeing that to make changes in CS5. So far that's worked well, and seems to work for others who have reported issues when opening a legacy .indd file directly.
    So, Do you still have CS4? If so, lets try something else. Open the .idml file you exported from CS5 in CS4, then export THAT to .inx, and finally, open teh .inx in CS5. If you haven't used any new unsuppoted features, this should work to give you a document with the same layout, but there may be some changes in text flow so check carefully for oversets and headings that might have moved. Try the TOC again...

  • CS4 problem with TOC

    Hi there,
    I'm working on a book  and I've created a table of contents.  I've updated the table of contents several times with no problem, but now when I go to Update Table of Contents, I get this message:
    You must include one or more paragraph styles in order to create a table of contents.
    Obviously, I'm not trying to create a toc - I"m tryign to update the existing one.
    I have my cursor in the existing toc when I try to update.  As I said, I've updated it several times while working on book -- only now I'm no longer able to update the toc.
    Why would the update toc no longer be working?
    Thanks so much.
    Yael

    HI there,
    I recreated the TOC and now the update works. I think perhaps I edited the previous TOC within the TOC rather than in the actual documents and perhaps that caused the update problem.
    So problem solved.
    Yael

  • Captivate 7 Word Search Interaction Problem with Difficulty Level

    In Cp 7 I can't change the difficulty level as it keeps reverting back to 9. It says I can select between 1 - 10 and I presume this will reduce the number of letters in the game but it won let me. Hellppppp please.

    It is happening with me as well. Guess it is a bug.
    Sreekanth

  • Thorny Problem with TOC links

    Hi again, I am working on a VERY large eLearning project... I
    have about 15 separate CP files, each of around 60 slides in size
    with lots of interactivity.
    The boss wants one Table of Contents that will "drill down"
    to every single page... basically, so that you can get to any piece
    of practice in the whole thing from one place.
    I built my own TOC, because the one that comes with Captivate
    is just impossible to use and doesn't work very well, and this
    works to the level that I can put "submenus" at the front of each
    individual .CP and then within that .CP link to the individual
    pages.
    But what I can't figure out is how to have just ONE LARGE TOC
    (it would be huge) that jumps "into" each of the other .CPs ... for
    example, if I wanted my TOC link in the "main.CP" file to jump; to
    "practice6.CP/slide 7" ... is there any way to do this... or is it
    impossible to do this kind of granularity using Captivate???
    Thanks very much... this would be a cool thing if I could
    learn how you do it (and if you can do it). Quiz Queen

    Hi there Quiz Queen
    I'd be very doubtful you would have any real success getting
    this granular using Captivate alone. You will likely find you need
    to combine it with something else. Maybe a Learning Management
    System (LMS) or something like RoboHelp where it could assist in
    providing easy navigation among hundreds or thousands of Captivate
    projects.
    You might also find something like Jesse Warden's Captivate
    Player to be just the ticket.
    Click
    here to visit Jesse Warden's site
    Cheers... Rick

  • Problems with lagging levels

    when I solo a track in my arrangement, whydo the levels in my mixer start lagging?

    So the problem is that the meter is not falling fast enough? And it "dances" normally once it is not soloed anymore?
    I have not seen this kind of behaviour myself, and it makes no sense either, as soloing a track does not alter CPU load (all the muted tracks are still playing, only silently - so that they sound immediately when you unsolo), but, if the sound does not suffer, well, then I suppose you can learn to live with it, even though it can be frustrating not knowing why things behave as they do.

  • Problem with TOC in long book doc

    Hi!
    I have a book with 16 chapters
    every chapter has its own TOC, including a heading that has its unique paragraph style
    Now, I want to create a TOC at the beginning of the book - using the heading of each chapter's TOC  - so I tell it to use that unique Para style (that I used for each chapter)
    for some reason after formatting the TOC and checking "use book docs" I get an empty TOC with the word "contents"
    any ideas what I may be doing wrong?
    maybe it can't pull from within other TOCs??
    TIA!!!

    It's good that you're looking into this before getting started.
    Search Google for terms like "indexing books" without quotes.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices    

Maybe you are looking for