Problem with tools staying over scan screen

I am finding that the tools box and tools panels stay on top of the scanning screen when I go to Import from device. This obliterates the scanning tools on the left hand side. It is really annoying and slows down the work so much. I cannot find how to keep them anchored down. Help please. This in only happening on 2 of my 3 computers and I cant see what is different about them.
Many thanks
Val

Hi there.. Thanks very much. I appreciate your help and advice. I have
tried everything and it only works if I redock everything and revert to
tabs etc before scanning. If I have any "floating" docs or palettes they
stay over the scanning interface screen which refuses to come to the top. I
had thought if I clicked on it it would come to the top, but no. This is
such a pain on the Mac as I have got it (and spent a small fortune on new
software) just to be able to work better in Photoshop. I am an illustrator
and only use my own scanned work which I will combine etc so always work
with several screens open and I like to move the palettes around to where I
need them.
Making the scanning interface screen smaller has helped a bit with the
tools but floating working docs still stay on top. I feel I am missing
something because I dont think this can be right? It slows down everything
so much having to re dock everything.
Anyway I much appreciate your time. Am I the only one who is having this
problem?
Val

Similar Messages

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it. My computer recognizes the ipod but the play lists saved in my itunes library are not the playlists that are on my na

When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.

bump, I have same issue. thanks, MM

Problems with pricing in Internet Order screen(CRM E-Commerce 5.0)

Good afternoon !
        We are using CRM 5.0 with CRM E-Commerce 5.0, and we are experiencing problems with pricing in the order screen.
        When we create an order and insert one item at this order, this item is processed and the price is calculated and shown correctly, both in the item and in the table of totals at the right corner(where is the Total Net Price, freight value, etc).
        If we change the quantity of this item, or insert more one item(with the same or other product), the price turns to zero, both in the item(s) and in the table of totals mentioned above. Also, in the table of totals, the freight value remains being calculated, even in this cases when the prices is turned to zero.
        What can be happening in this case ? What can I check to determine the cause and solve this problem ?
        Thank you in advance !
        Wilson

Good afternoon !
        This problem was solved adjusting some parameters of partner determination.

Sync Problem - "There is a problem with this drive. Scan the drive now and fix it".

Have new desktop computer with Windows 8.When I connect my iPod to my computer to sync, I get the message – “There is a problem with this drive. Scan the drive now and fix it”. It is identifying the drive on the iPod as the problem. iPod works fine on my laptop computer and older desktop (both with Windows Vista). iTunes seems to momentarily recognize my iPod then it doesn't. Any thoughts about a fix?

bump, I have same issue. thanks, MM

Safari have problems with streaming radio over flash

Hello,
since my update on MAC OS LION have my safari problem with radio streaming over flash.
For testing: http://shoutcast.flashradio.info/#/House/814384/
In all browsers on all platforms will this work. Just on the combination from MAC OS LION and Safari 5.1 we get the io error #2032.

Try changing some Advanced wireless settings on the router. Open the setup page of the router and go to Wireless tab. Click on Advanced wireless settings. Change beacon Interval to 75, RTS threshold to 2304. Save the settings.
Change the wireless channel to 11.
An 802.11n router can also work with 802.11g and even 11b devices. But these much slower devices force the router to slow down to talk to them, which means a big throughput hit. Fortunately, the "legacy" mechanisms are pretty efficient and reduce throughput only when the slower devices are actively transmitting or receiving. Either upgrade to all 11n clients, or use a separate 802.11g router to handle your "legacy" stuff.

Ipod classic says when trying to sync, Problems with this drive. Scan the drive and fix it ...what do i have to do?

When trying to sync my ipod classic I get an error message " owners IPO (I)...Problems with this drive..Scan the drive and fix it now.....How am i supposed to scan the drive and fix it?

Hi chiefdon,
If you are having syncing and possibly disk issues with your iPod classic, you may find the steps outlined in the following Troubleshooting Assistant helpful:
Apple Support: iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Regards,
- Brenden

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot

Problems with flashing images top of screen in CS4

Hi there: I'm running Photoshop CS4 on an iMac 27 inch - Processor 3.4 GHz Intel Core i7 / Memory 8 GB 1333 MHz DDR3 / Graphics AMD Radeon HD 6970M 2048 MB / OS X 10.8.2.
Ever since buying the Mac I've had problems with what I can only describe as flashing, bitmap images around the main image but not within it. This problem mostly occurs at the top of the screen (in the 'Rulers' area)
but occassionally happens to the left and right of the image too. I've reached the limits of my 'tech' expertise and trashed the Preferences a couple of times but I still have the problem.
I found one similar problem on the forums but not the same as it was all over the screen and required a complete reboot; I only need to quit Photoshop or ignore it - although it is very distracting!
Their problem was the video card, could this be the same? Very grateful if anyone can shed light.

willspring,
Just to make sure: As I understand it, things worked in CS4, not only in earlier versions.
To reset settings in Illy, you may Move the folder, but it may not solve the issue (the simpler but less thorough resetting being to Ctrl+Alt+Shift/Cmd+Option+Shift during startup).
Have you made any changes, such as printer driver or whatever, between success and failure?

Backup problem with Time Capsule over Router

Hello fellas,
I am facing a back up problem with my TC(2TB) with Time machine. When I try to back up it gets stuck at "preparing backup". However when i directly connect to it via its own wifi, everything works like a charm. I even erased older back ups and created a new one. When I, however, switch back to the router setting (TC connected to a Router and me connecting over wifi) I still do see the erased backup on the right side. When I try accessing them, I get a black window where I should be seen a mirror of the desktop. I can manually (over Finder) add and erase files in the TC. The TC does pick IP and is active.
I did verify and repair the TC.(Permission tab was grey)
OS 10.9.5
TC version: 7.7.3
Hope you guys can help me.

Mavericks has a lot of issues with networking.. And it effects TM and the TC more than most things.
Apple finally fessed up there was some issues.
OS X Mavericks: Time Machine problems
Let me recommend you follow exactly the same list as in this thread.
I just updated Safari 7.1 and OS X Mavericks 10.9.5 now my Time Machine is not backing up and I don't know how to fix it.
In your situation there is a couple of other things to add.
Make sure IPv6 is set to link-local only.
I am not sure how your router is handling ipv6 or bonjour for that matter.. both are necessary to have TM work.
If that doesn't solve it..
Use Finder to force the connection to the TC to AFP protocol.
From top menu, Go, Connect to Server.
Type AFP://TCgenx.local (where you replace TCgenx with your nice new short name). local is the default domain in the TC and it can help to specify as your router is probably using a different domain.
Even better is to use the TC IP address.. but it has to be static.. so you will need to set it by dhcp reservation in the main router.
AFP://192.168.0.100 (replace with the actual TC IP you can get it from the summary screen in airport utility but must be static).
If you still have issues post back more details.
What router are you using make and model?
If it is not apple compatible it may simply never work.. some routers do not handle specific apple protocols like airplay or bonjour and this affects how it works with TM.

Problem with IP phone over VPN

         |   UC520   | ------------------------ |     861     |
                 |                                                  |
              LAN                                             LAN
Scenario:
UC520 box is at HQ and serving as a EZVPN server and 861 at branch as a EZVPN client. There is no problem with VPN i can communicate with HQ network. My ip phone get registered but facing these problems.
1) Dialling out and in OK
2) Connects OK after picking up
3) NO sound either way
4) Cannot end call from this side. End call button does not work
5) When other end hangs up - message "UCM down, features disabled". Then phone registers again.
Identical symptoms for both softphone and 7941.

This document provides a sample configuration for Quality of Service (QoS) for Voice over IP (VoIP) traffic on VPN tunnels that terminate on the PIX/ASA Security Appliances.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008080dfa7.shtml

Problem with checkbox in the selection screen

Hi guys,
I have a problem with the check box in the selection screen.When i select a check box then a field in the selection screen should be enabled for entering a value.Again if i unselect the checkbox then the field should be disabled for entering a value.I have written the code in at selection-screen output.
The problem is when i select the check box ,the field is not enabled.But when i press enter after selecting the checkbox then the field is enabled for input.It is the same when i unselect the checkbox,after i press enter only the field is getting disabled.What could be the problem.Any suggestions please?
Thanks.

Hi d p
             Please try this code . I think this code have some way that you would like.
REPORT zdownload_to_application_server.
TABLES : caufvd, jest.
I N C L U D E P R O G R A M                                        *
*INCLUDE znrpstnd.
Selection Screen                                                    *
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: p_outb RADIOBUTTON GROUP g1 USER-COMMAND outb DEFAULT 'X' ,
            p_inb RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETERS : p_werks LIKE caufvd-werks MODIF ID a.        " Plant   "OBLIGATORY
SELECT-OPTIONS : s_auart FOR caufvd-auart MODIF ID a,       " Order Type
                   s_aufnr FOR caufvd-aufnr MODIF ID a.       " Order number
PARAMETERS: p_path TYPE string DEFAULT 'C:\SchedulerInterface-OutboundTextFile\' MODIF ID a,
            p_actual AS CHECKBOX MODIF ID a.                  " Transfer Actual
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS : p_werks2 LIKE caufvd-werks MODIF ID b,   " Plant   "OBLIGATORY
             p_path2 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_path3 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_sessio TYPE apqi-groupid MODIF ID b.   " BDC Session
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
IF p_outb EQ 'X'.   " Outbound --> Hide inbound
    LOOP AT SCREEN.
      "IF screen-name = '%BT02011_BLOCK_1000'.
      IF screen-group2 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      "IF screen-name = '%BT01004_BLOCK_1000'.
      IF screen-group3 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path2.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path2
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path3.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path3
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
TOP-OF-PAGE.
START-OF-SELECTION.
Regards
Wiboon

I have problem with Flash Player. Full screen doesn't work correctly. Turning off hardware acelleration helps but I want this option to work.

Problem exist only on YouTube. When i want get full screen, I have black screen with audio. If I click few times full screen button it helps, but I want to go to full screen by one click.
If i turn off hardware acceleration everything is ok but vids looks terrible.
I have this problem with Flash Player 10. No 9 works good, but some websites wants no. 10

Generaly FP works, but problem is that i must press few times full screen button. Now i have turn off hardware accelleration, but movies are quite bad.
I have already installed newest graphic drivers but it didn't help.
Everything was good unless Flash Player and Mozilla notificated that update is necessary :<

Problem with tool bar

Hi,
I have a problem with my illustrator CS5, the toolbar doesn't show sub-options.
For example if I click the Rectangle Tool (M) button looking for sub-options (a sub-option is for example the Ellipse Tool (L)), nothing happens. I managed to use the Ellipse Tool (L) through shortcuts, but I want my tool bar to be able to display all the sub-options.
In other words all the buttons with a little triangle at the button-right corner, are supposed to show sub-options, but they don't.
I've consulted the problem with one of my co-workers, he suggested installing it all again -> I don't wanna do that.
Please help.
Thanks in advance.

You have to click and hold the button. As an alternative you can alt-click it to cycle through the tools

Problem with tools staying over scan screen

Similar Messages

Maybe you are looking for