Problem with transaction iview

Whenever I access a transaction iView I get a blank bowser page saying Action Cancel.

Can you post more details Miller?
Is it something new u have started seeing?
Is everything perfect like Alias and stuff?
Post back with more details.
Regards,
P

Similar Messages

  • Problem with Transaction iView when calling R/3(Personalization)

    Hi
    I have created several Transaction iViews , where I am calling different Backend Systems like R/3 , BW, etc.
    My problem is , when I launch the iView, I can able to see the SAP Easy Access for R/3 , BW etc. But the language that user have in the backend is over writed by English.
    In the iView properties, I have not selected any language.
    In the Portal Personalization /UME also I have not selected any language.
    But in R/3 I have selected "de" as my language but the R/3 SAP Easy Access showing only English.
    Any advice please? should we have any settings in the portal without touching iview properties or portal personalization to view the backend GUI in the same language that is set in the backend profile?
    Thanks in advance.

    Hi,
    The following way might help you.
    Go to Internet web browser, select Tools in the menu, then select Internet options --> General Tab --> Languages --> Add --> German(de) . finally move up the German(de)
    Deep

  • Problems with transaction CJ20N

    Hello Experts,
    I have created a tooling asset with transaction AS01 and I have some problems with transaction CJ20N.
    I would like to know how can we Link the Asset already created with the WBS by transaction CJ20N.
    Thanks
    Ferdaws

    Hi Ferdaws,
    In the asset master (AS02) you can maintain the WBS element in Time Dependent data.
    For maintaining the WBS element in asset master, first you have to make WBS element optional entry in Screen Layouts for Asset master data.
    Kindly check with this.
    Best Regards,
    Vasu.

  • Problem with Transaction-Duration Dialog

    Hello All,
    I wonder if somebody could shed a light on the problem that we're having
    with transaction-duration dialog service object. The problem is this.
    When we call the service object and its SQL statement fails (for
    example, because of constraint violation) Forte raises AbortException.
    It also clears the error stack, so we have no way to know what caused
    it, original error ("ORA -... Constraint Violation") disappears. All we
    get is this:
    USER ERROR: Access to a load balanced router member (which is a service
    object) failed for the reasons below.
    Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
    Error #: [601, 162]
    Detected at: qqdo_LbRouter::Route at 2
    Last TOOL statement: method tester.test, line 3
    Error Time: Thu Jul 2 15:56:40
    Distributed method called: SO_UmbrellaProxy.testAbortExc (object
    name
    site/sosa_sampleservice_cl0/th_testabort_cl0-bmso0x15d:0x1) from
    partition
    "TH_TestAbort_cl0_Client", (partitionId =
    DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d.4]) in application
    "Forte_cl0", pid 74 on node AANANIEV in environment archenv
    Originator: SP_AO_XACTMGR
    Exception occurred (locally) on partition "Forte_cl0_Client",
    (partitionId
    = DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1.16]) in
    application
    "Forte_cl0", pid 74 on node AANANIEV in environment archenv.
    USER ERROR: Your transaction was aborted
    Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
    Error #: [402, 45]
    Detected at: XactMgr.TXAbort at 1
    Error Time: Thu Jul 2 15:56:40
    Originator: SP_AO_XACTMGR
    Exception occurred (remotely) on partition
    "TH_TestAbort_cl0_Part1-router", (partitionId =
    DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15b:0x9, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2.17]) in
    application
    "TH_TestAbort_cl0", pid 18196 on node hp9000_1 in environment
    archenv.
    Has anyone experienced this problem with "transaction-duration" service
    object? Is there any way to find out the cause of "AbortException"? It
    seems impossible to catch the AbortException on the server partition,
    looks like Forte exits right away.
    Everything works fine with "message-duration" dialog, unfortunately it
    is not an option for us because of the way our batch programs were
    designed.
    Any help is greatly appreciated.
    Alexander Ananiev
    Claremont Technology Group
    916-558-4127
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    thanks Peter for trying to help
    ok, i've narrowed down the problem, it seems that when i try and save a file onto one partition of one of my ext drives it won't save to my last save dir but if i save to another partition/drive it works ok, also if i rename the 'dodgy' partition it also seems to work ok, so somehow the name of the drive has become corrupted.
    anybody ever heard of this? or how i could fix this as it's a quite annoying because alot of my audio files are referenced on this partition, so itunes or Cubase (audio sequencer) can't find my files now.

  • Problem in Transactional iView with SAP GUI Type

    Hi,
    I've one Transactional iView in which I'm opening one SAP report. This report can be downloaded using option Local File. Once I click on this option, one popup appear where format can be selected and afterward file can be downloaded.
    Problem: Once I choose SAP GUI Type in Transactional iView is SAP GUI for HTML then it wouldn't allow me to download file and just hanged, once I click on popup download.
    But same is working once I choose SAP GUI Type = SAP GUI for Windows.
    Can someone suggest me, what is the problem exactly?
    Thanks,
    Vikas

    Yeah Michael, you are absolutely right, it seems same problem, I'm getting some applet loading exception.
    But, I already have JVM installed version j2se1.6, same as colleague have.
    I couldn't understand solution properly suggested in Note, can you brief me, would be really great.
    The error I'm getting is..
    load: class Query.class not found.
    java.lang.ClassNotFoundException: Query.class
         at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.SocketException: Network is unreachable: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at sun.net.NetworkClient.doConnect(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient.openServer(Unknown Source)
         at sun.net.www.http.HttpClient.<init>(Unknown Source)
         at sun.net.www.http.HttpClient.New(Unknown Source)
         at sun.net.www.http.HttpClient.New(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at java.net.HttpURLConnection.getResponseCode(Unknown Source)
         at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
         at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
         at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 7 more
    Exception: java.lang.ClassNotFoundException: Query.class
    Please suggest.
    Thanks,
    Vikas

  • Problem creating transactional iview for BW system

    Hi gurus
    We are facing one problem creating a transactional iview for a BW 3.5 system . We wanto to call transaction SU01 in our BW system using an iview. When we use SAP for html, we have all the menu on the iview , I mean the same result as if we use smen, not SU01.
    And if we use SAP GUI , we are always having the same GUI Error
    Sapgui 640 [Build 8986] Wed Apr 01 12:25:05 2009
    : 'service '' unknown
    Time          Wed Apr 01 12:25:03 2009
    Component     NI (network interface)
    Release          640
    Version          37
    Module          ninti.c
    Line          505
    Method          NiPGetServByName2: service '' not found
    Return Code     -3
    System Call     getservbyname_r
    Counter          1
    Please, can you help us?
    Thanks in advance and best regards.

    Thanks Bala for your quick reply. I´ve tried with function module RSBB_URL_PREFIX_GET  and all the settings were OK. Still the same result.
    Adding more information. We have another WAS 6.40 server with different Module(we have RM and XRPM , not BW) and we are having the same problems. I am wondering if its related with some special config or activation 
    Maybe  I´ve forgot some service activation in SICF? I´m able to reach the SMEN, but not the SU01
    or I´m missing some config elsewhere?
    Thanks in advance.
    Best regards.
    Edited by: Jose Ignacio Arlandis on Apr 2, 2009 8:41 AM

  • Problem with transacted JMS connection factory and transaction timeouts

              We encountered an interesting problem using transacted JMS connection factories.
              An EJB starts a container managed transaction and tries to validate a credit card
              before creating some information to a database for the user, in case of success
              an SMS is sent to the user via the transacted JMS queue. If the credit card authentications
              duration is about the same as the transactions timeout (in this case the default
              30 seconds) sometimes the database inserts is committed but the JMS insert is
              rollbacked. How can this be?
              If the authorization duration is much longer than 30 seconds everything works
              fine (both database and JMS inserts rollbacked), the same is true if a rollback
              is insured by calling EJBContext.setRollbackOnly(). The problem thus occurs only
              if the duration is approximately the same as the transaction timeout, it appears
              that the database insert is not timeouted but the JMS insert is. How can this
              be if they are both participating in the same transaction.
              The JMSConnectionFactory used is a Connection factory with XA-enabled. The result
              is the same also with the default "javax.jms.QueueConnectionFactory" and if we
              configure our own factory with user transactions enabled.
              Any help appreciated!
              

    Tomas Granö wrote:
              > We encountered an interesting problem using transacted JMS connection factories.
              > An EJB starts a container managed transaction and tries to validate a credit card
              > before creating some information to a database for the user, in case of success
              > an SMS is sent to the user via the transacted JMS queue. If the credit card authentications
              > duration is about the same as the transactions timeout (in this case the default
              > 30 seconds) sometimes the database inserts is committed but the JMS insert is
              > rollbacked. How can this be?
              It should not be.
              >
              > If the authorization duration is much longer than 30 seconds everything works
              > fine (both database and JMS inserts rollbacked), the same is true if a rollback
              > is insured by calling EJBContext.setRollbackOnly(). The problem thus occurs only
              > if the duration is approximately the same as the transaction timeout, it appears
              > that the database insert is not timeouted but the JMS insert is. How can this
              > be if they are both participating in the same transaction.
              >
              > The JMSConnectionFactory used is a Connection factory with XA-enabled. The result
              > is the same also with the default "javax.jms.QueueConnectionFactory" and if we
              > configure our own factory with user transactions enabled.
              >
              > Any help appreciated!
              Make sure that your session is not "transacted". In other words,
              the first parameter to createSession() must be false. There is an
              unfortunate name re-use here. If a session is "transacted", it
              maintains an independent "inner transaction" independent of the
              outer transaction. From the above description, it seems unlikely
              that your application has this wrong, as you say that
              "setRollbackOnly" works - but please check anyway.
              Make sure that you are using a true XA capable driver and database
              (XA "emulation" may not suffice)
              Beyond the above, I do not see what can be going wrong. You
              may want to try posting to the transactions and jdbc newsgroups. Note
              that JMS is appears to be exhibiting the correct behavior, but the
              JDBC operation is not. The JDBC operation appears to have
              its timeout independent of the transaction monitor's timeout.
              Tom
              

  • Probleme with transaction in session beans

    Hello.
    i create an session bean which call enties beans.
    When i execute un example first time, its correct.
    when i execute for second time, the methode don't stop.
    i think it is problem of transaction.
    thank you

    Hi,
    It is impossible to answer your with the given information. When ever you are asking a question please put the relavent informatin like code and deployment descriptors. So please do post the required information.
    Ashok

  • Problem with DiscussionGroups iView

    Hello Yogi/Robert,
    I have a problem with my discussion groups iview.
    I am using the discussion groups iView, and layout set is DiscussionGroupsContributor. The iView is using the /discussiongroup folder to store the discussions created.
    Here's the problem: all the discussions created are stored in the same folder, and every new room created is able to view the same discussions.
    I want to be able to restrict discussions to different rooms, so that members of one room cannot view/read the discussions from another room.
    Please,how can I get this done...it is very urgent!!!
    Thanks in advance.
    Collins

    Hi Collins,
    have a look on how the room template "SAP_Standard_Template_2 (Read only)" is configured and configure your template in the same way.
    You need two Room Extensions, one for the DiscussionPermission and the second for Discussion Persistency. In the second a preconfigured room extension CM store is used (here cmDocuments with the label "Documents"). The output parameter "discussion_path" is mapped on the Path parameter of the RoomDiscussion iView on the RoomDiscussion Page.
    So the sentence "<i>For data for discussion groups inside rooms, the system determines the path to the storage folder automatically.</i>" is only correct if you work with room extensions as mentioned above.
    If you need more information on CM Room Extensions have a look at this link: http://help.sap.com/saphelp_nw04s/helpdata/en/f2/3c9041eedda009e10000000a155106/content.htm
    Hope this helps,
    Robert

  • Problems with transaction MD21

    Hi experts, i have a problem with this transaction because every time i open it when i try to add the material text in the Modify layout button, when i hit ok no text appearts in the field, whant can i do?, thank you in advance.
    kind regards

    Hi
    1) Create a Screen Variant in SHD0 with Additional Material Data ticked for MD21 transaction and assign to specific users.
    2) After Entering MD21 in the Display Planning file entries screen click on  Change lay out and save as default after selecting Material Description column
    From nxt time onwards the user will get the Material Description in the Layout for the Selection criteria
    Regards
    Brahmaji

  • Page Layout Problems with embedded iViews

    Hi all,
    We are having problems with the position of the iviews in the layout page using embedded iviews. Sometime load in one order and other times in another one. I need that the iviews load in the same order always.
    Any idea, please?
    Thanks for all.

    Hi José,
    if in fact this is the case, then I would expect that the single iViews are called via different threads. If this is the case, then I would implement within the iView to wait for some result provided by the iView, which should be loaded first (for example, by putting some certain value into the http session object).
    For deeper discussions on this topic see  and
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

  • Disable transaction box and menue from wingui with transaction iview

    Dear all,
    has anyone a solution to disable or hide the menue and transactionfield in a portal transaction iview thats called with wingui.
    Webgui is no solution.
    Best regards
    Thorsten Stracke

    Hi Vineeth and Ramganesan,
    thanks for quick response, this will be a option when all clients shoul use this behavior.
    I search for a solution, where i can decided in a view to switch it of. Normally i can attach dynpro fields and values with the dynamicparameter, if this can use for hide .. the box or some functions in the gui state.
    An other idea is to use a new status for the reports and transactions, but i don't know who use this as parameter.
    Best regards
    Thorsten

  • Displaying problem of Transactional iview -- Displaying ~ITS~ above iview

    Hi ,
    A transactional iview is created and assigned to a workset .
    Its working fine.
    When it is displaying , I closed the detailed Navigational panel by clicking on the arrow of the iview in content area . so that the iview may also occupy the detailed navigation area . It is displaying  ITS  above the iview that is below workset tab  area .
    When i again clicked on the arrow to see the detailed navigation .....it is again show one more time ITS ...as
    ITSITS.....
    when ever iam closing and opening detailed navigation area ....subsquently ITS message increasing....ITSITSITS.......
    Can any one provide me solution for not displaying ITS  message....
    Version : EP 7.0 , sp12

    Hi Sumit,
    Check out your Interner Explorer settings, it happens sometime if your secutiry setting are kept high.
    Change the Privacy setting to Medium or Low.
    Thanks,
    Trikanth

  • Problems with transaction wsk1

    Hi everybody, I have some problems with the transation WSK1, I try to copy assortment source to assortment destiny but  it doesn't copy all the records on table marc ,it ends without any error , but when I check tha table marc it is not completed.
    what it could be the problem?
    regards

    Hi,
    Post your query in the below mentioned forum to get it solved quickly. This forum is specific to SAP Master Data Management.
    /community [original link is broken]
    Regards,
    JItesh Talreja

  • Problem in transaction iView

    We  have a  transaction iView (SAP GUI For HTML) .When we click on the relevant link in the portal that transaction iView is displayed. For a particular field in that transaction if we click on the folder tab besides the field then a pop up window is appearing from where we have to select some values but  in the portal we find some extra u201C0u201D padding before that values.But if we check that particular transaction in the GUI then values are displayed correctly(without u201C0u201D padding before the values).
    We have used ITS(Internet Transaction Server) which communicates between SAP GUI and Portal.
    Please give your suggestion how do I check the application which is displayed in the Portal. Displayed application sceen is different than the SAP GUI transaction screen. I think the displayed screen is BSP application.
    Any suggestion?

    Hello Shuvrajyoti,
    Could you please check the BSP application.
    BSP application contain html code and the extra '0' could be a typo in the code.
    Awaiting Reply.
    Regards,
    Ritu

Maybe you are looking for