Problem with transferring psds from PC cs2 to Mac cs3

Hello I'm having an issue with a psd file that was made on a PC using cs2.. i can't open up the file on a mac with cs3.. any reason why?
Bomber

If it is a Fonts issue, be aware that not all fonts are transferable from PC to Mac and vice versa.
I have to say though, that in the past when I've had conflicts like that it's opened the file and gave the option of substituting the font. Don't have CS3 though.
I'd still like to know how the files are being transferred.

Similar Messages

Problems with transferring music from itunes to ipod

Hello, I've never had problems with iTunes but this issue amazes me! I emptied my whole iTunes Library the other day, and added a whole load of new songs. Then, when I was finished with my selection I connected my iPod Nano to USB portal at my pc. iTunes recognised the iPod and also said: bijwerken.. niet loskoppelen (moving files, don't disconnect). This takes 2 seconds and then it says the iPod is ready with transferring files.
Then I notice that no files where moved at all. My iPod is empty for two days now and It's killing me !! hehe, please help ?!
Tom

I'm not sure if this is what you are after but Forum member Buegie has compiled a very extensive procedure for backing up your music which you'll find at this link: Backing up iTunes
You'll also find instructions here on uninstalling iTunes: Stepwise clean uninstallation of iTunes</a
I hope these are of some help, take care.

Reoccuring HANGING problem with transferring files from old MACBOOK

ok, so I recently bought a iMac and i wanted to transfer my music and photo files from my older (waterdamaged a while back but still works fine) macbook. I've tried basically every method to try and get this done.
I've tried migration assistant, transferring the files through a shared wireless network, through firewire/disk target mode, but all of those methods i tried resulted in hanging very early on in the transferring and copying operation.
I believe it must have something to do with my macbook's hard drive, but i have no idea what to do at this point. Could someone please help me?

the thing is tho, the hard drive had no problems copying and transferring for over a year after the damage, while i continued to use it. I don't a reason why it wouldn't work now when i finally want to move a larger number of files at once (itunes music folder, iphoto library)

Problems with transferring software from MacBook Pro to MacBook Air

The store transferred applications and contents from one machine to the new one and most applications work OK. However the Adobe Creative Suite 4 Design Standard CS 4 for the Mac (purchased in October 2009) is unusable. I need two packages in particular: In Design (this is version 6.06, and keeps crashing, giving an error code 0x0008014B) while Photoshop says some components are missing and it should be reinstalled. How? Adobe says these versions are incompatible with MacBook Air and they can offer no support. I am not technically proficient and feel totally stumped. Any suggestions?
Jokila

I don't know. I don't own a MacBook Air.
You can download the trial version of the software thru the page linked below and then use your current serial number from the disks to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

I have a problem with transfering photos from iPad to MacBook Air, how do I go about doing that?

Photos from iPad to MacBook Air, I am currently trying to use my USB cord to transfer photos, but how?

You can only import photos in the camera roll, not synced photos. So I assume that you want to transfer the photos that you shot with the iPad camera. You can use iPhoto or Image Capture on the MBA.
Just connect the iPad to the Mac with the cable and launch either of those two apps. Your iPad should appear under the devices heading in the left sidebar of the app. Click on the iPad name just like you do when you sync with iTunes and the camera roll photos should appear in the window on the right.
you can read more here.
http://support.apple.com/kb/ht4083

Problem with transferring apps from iTunes to iPad

The problem i have is when I want to transfer my apps from the computer I get a message to authorize my computer. I have already authorized my computer long ago. And when I have written my password I get another message to authorize my computer, and I write my password and it goes on and on. What am I to do?

Click here and follow the instructions.
(55828)

Problems with transferring photos from Nokia Lumia...

Hi,
Have a problem to transfer my photos and videos from my Nokia Lumia 610 to my PC ( Windows 7), as follows:
1) by email- when I try to send an email from my Nokia 610 and attach a photo, I do not have the attach option on my hotmail account when using the Nokia
2) when I try to transfer photos from Nokia 610 to my PC via a USB cable:
a) The PC recognizes the Nokia device and lists its folders ( like camera roll, etc) , however when I try to open these folders there is no content in them, even though there are masses of photos in thoses folders on my Nokia
b) When I downloaded and installed the Zune software from the authentic Microsoft site http://www.microsoft.com/en-us/download/details.aspx?id=27163, the version I downloaded does not have the Social and Phone option ( it only had Quickplay Collection and Market place icons ) and it does not recognize the Nokia 610 device connectd to the PC. when I click on Collection there IS NO content from Nokia Lumia in it.
Could you please advise what are the origins of the above problems and how to solve them???

hmm.
well zune is not going to help you.
you could go into your settings/backup and select to save all to your skydrive...best requires wifi.
then you can go to log into your skydrive, download the software to your pc and that folder will be right on your pc, and you can drag them right from that folder to anywhere you want.

Problem with transferring garageband track from iPad2 to macbook

Hello,
I have a problem with transferring track from Garage band 2.0 on iPad2 to a new macbook pro (oct2013).
I saved a track on macbook via iTunes but when i`m trying to open it on Garageband it shows an error.
I have updated all soft recently. So it couldn't be true.
Could you please help me to solve the problem?
Thank you very much!

What software are you running on your MBPr? Are you using MacOS X 10.8.5 or MacOS X 10.9? Probably you need to update your MBPr to Mavericks and GarageBand 10.0.0.

Problem with trasferring music from itunes to Iphone 3Gs.

Hi
I have a problem with trasferring music from Itunes to Iphone and that is,
as soon as I finish transferring music to my Iphone, Itunes suddenly stops at the stage of where it says (at the top-centre of the screen), 'Sync Min's Iphone'.
Due to this reason, I've restored my Iphone a couple of times and reinstalled itunes but same problem occurs whenever I try to transfer music.
It appears music are successfully transfered since I could play the music on my Iphone but I wanna fix the problem since it's pretty annoying.
is there anything I can do about it?
Thanks
Message was edited by: Minsik Park

Make sure you have the latest version of iTunes (8.2.1?). If so, I'd reinstall iTunes, if the phone is otherwise working fine.
Phil

Problem with trasferring music from Itunes to Iphone

Hi
I have a problem with trasferring music from Itunes to Iphone and that is,
as soon as I finish transferring music to my Iphone, Itunes suddely stops at the stage of where it says (at the top-centre of the screen), 'Sync Min's Iphone'.
Due to this reason, I've restored my Iphone a couple of times and reinstalled itunes but same problem occurs whenever I try to transfer any music.
It appears music are successfully transfered since I could play the music on my Iphone but I wanna fix the problem since it's pretty annoying.
are there anything I can do about it?
Thanks

I am having the same problem however i get a error 13001 message and my itunes says that there is music in my iphone but there really isnt.. any one have a solution???

Problems with transferring iTunes Library to new iMac

I am having a problem with transferring my iTunes library to my new iMac. I have read many of the suggestions posted in this forum along with numerous articles on other sites. I have not seen anyone describe my exact problem.
When I got my new iMac, I used Migration Assistant to transfer everything (files, applications, settings, etc.) from my old iMac to the new iMac. On my old iMac, the iTunes music folder (i.e., the actual mp3s) are on an external HD, while the iTunes Library file (the database and xml files) were in the /user/Music/ folder on the old iMac.
After the Migration Assistant was done, the /user/music/ folder and the library files were copied to the new iMac, but the iTunes music folder was not. It is still on the external HD.
If I open iTunes on the new iMac, iTunes shows me all of my songs, but if I play one, I get the "song can't be found; do you want to find it" error. In iTunes preferences on the new iMac, the "iTunes music folder location" is the new iMac.
I have the 2 iMacs connected by a firewire cable, but neither iMac recognizes the other computer as being on the same network. That is, in Finder on the new iMac, I cannot see the external HD of the old iMac.
I can't change the library location on the old iMac, because the new iMac does not appear in Finder or in the "Change Music Folder Location" dialog box.
I want to move the music folder (the actual mp3s) from the external HD of the old iMac to the INTERNAL HD of the new iMac. I don't need to keep them on the old IMac, as I will be selling that computer. Of course, I want to keep all my playlists, artwork, etc from the old library.
Does anyone have a suggestion?
Thanks.

Never mind. Figured it out. I attached external HD to new iMac and consolidated. Duh.

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problem with transferring psds from PC cs2 to Mac cs3

Similar Messages

Maybe you are looking for