Problem with Trial Balance Zero Balanced Acct

Hello
I am trying to generate the Trial Balance of a ledger account where posting exists but it is 0 balanced.
lets say -
Travel a/c Debit Rs. 100
Cash a/c Credit Rs 100
again
Cash a/c Debit Rs. 100
Travel a/c Credit Rs. 100
Now, the balance of Travel a/c is 0
But when I am trying to see this in Trial Balance it is saying "No Data" although I have de-selected the checkbox "Hide Zero Balanced Acct".
I am using a custom Template which is made by generating Standard Chart of Account.
I am on SAP B1 2007B PL 23
Regards
Indrajit

Upgrading the patch has been of help to some extent. However the same is perfectly working with version 8.8
Closed
Thanks and Regards
Indrajit

Similar Messages

Adobe Photoshop CS3 - Problem with Trial

I recently downloaded and installed Adobe Photoshop CS3 directly from Adobe as it is the latest version my Mac supports. Upon start up, I am greeted with two options: a) I have a serial number for this product. and b) I want to try Adobe Photoshop CS3 free for 30 days. Seeing how I am simply looking to evaluate and have not purchased said product, I selected option b.
However, upon clicking "Next >" I am greeted by an error. "Problem with Trial" I am left with nothing but wasted time. This is the first time I have ever installed Adobe Photoshop CS3 so I do not understand why it will only allow access with a serial number. Any help to allow me to try this software is appreciated.
Thanks.

Could the trial have a time bomb in it that prevents use after several years? There's not much of a need for Adobe to allow trials to run for so long after the product's life cycle has concluded.

"Problem with Trial - problem loading trial period for Adobe Photoshop CS3"

Hello,
I installed Photoshop CS3 Trial and whenever I run it and choose to begin my trial period I get the following error message:
"Problem with Trial - problem loading trial period for Adobe Photoshop CS3".
I tried uninstalling and reinstalling, and even ran the Adobe CS3Clean Script but nothing seems to help.
I should note I never installed any earlier version of Photoshop on my system (I use a fresh copy of Windows XP with only a few programs installed).
Any suggestions will be appreciated.
Thanks,
David

i had the trial of photoshop on and the trial has run out my friend has given me a disk with adobe photoshop on and i cant do it beacause of the regestry code the photoshop puts in after the trial has ended to tell my pc that i cant have photoshop on my computer again :(:( now i have herd that you can remove the codes but it is quite hard well iam willing for this challenge and if anyone could help me i would reall welcome your help or if anybody has got the link to a tutorial to tell me hoe to do it i would aprecitae that to thank you all very much and post bak soon please

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

Error - Problem With Trial

Hi all
I downloaded de Adobe Captivate 3, at choose to enter a valid
serial or trial period, choose trial period, and error message
appear.
“Problem With Trial”
Using Windows Xp SP2
Not using dual Boot
The Temp and Tmp using same folder
A Time a go Using Trial Version flash but I formatted my PC

Nobody can tell you anything without proper system info or other technical details. Inevitable Muse's licensing is tied to CC, so check that as a start:
Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Problem with trial CS6 download

I downloaded a trial CS6 software. How do I get it to run?

Whoops! I assumed the software installed on download. Works great now! Thanks for the help.                                                                                Mark
Date: Sun, 12 Aug 2012 00:30:48 -0600
From: [email protected]
To: [email protected]
Subject: Problem with trial CS6 download
    Re: Problem with trial CS6 download
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
You need to install it first, of course. Click the Setup program and run it. Mylenium
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4615344#4615344
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4615344#4615344. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with Trial License

Hi,
I installed the 60-Day-Trial of Crystal Reports Enterprise 2008 Server. All Services worked fine for the first few days.
Now i cannot upload new reports, so I started the diagnosis tool. It seemed that there is a problem with my license key.
I checked the license key in cmc:
There is an empty page, there is no license key appearing.
How can i reactivate my licensce?
For your information: I have installed an apache 5.5.
Thanks for answers.

Any ideas for reactivating the license without cmc?
I looked for the key in the registry, it looks like:
[http://img522.imageshack.us/img522/6996/clipboard04m.jpg]
Is it possible that the key is only valid in combination with the version? maybe i installed an update or patch and this update increased the version, so that my key is not valid any more.
I tried to start the registration wizard ("C:\Programme\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\regwiz.exe" HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Enterprise\Keycode)
Then the message "Valid license key can not be obtained" is displayed. Maybe this is helpful for you to have an idea for solving my problem.
Which log-file must be viewed to watch the errors appearing in the cmd-license-section? Maybe there is a detailed message, which is not displayed in the cmc-window.
Edited by: rufushome on Feb 13, 2010 4:20 PM

Lightroom 2 - problems with trial download?

I thought I would try Lightroom 2 to see how it compares to Photoshop Elements 8. I downloaded the trial version okay and it seemed to install okay. When I tried to run it, the initial panel comes up and a few seconds later is glossed over by a panel saying to the effect that "Adobe Photoshop Lightroom 64-bit has stopped working" and I get a smaller panel to the effect that Windows is "checking things out". I then get a button to push that tells me to "Close Program".
Obviously something is wrong. I am running Windows 7 on a Dell Inspiron 545 (64 bit - I believe) and I am not sure what else is under the hood that might cause problems. I have Photoshop Elements loaded and it runs with some problems, but I don't understand how that could affect Lightroom. I also tried to download and run Lightroom 3 Beta and had the same problem.
Any help or insight that anyone would care to provide will be greatly appreciated, because I have heard that Lightroom is a very good product (not sure how bug-free it is compared to Elements) and I would sure like the opportunity to at least test it out. Thanks in advance.
Regards,
WesternGuy

I removed all the Preference files that you indicated. I uninstalled Lightroom 2.6. I then went back to the NVIDIA site and checked for an update to my driver for Windows 64-bit configuration. The site said there was one, so I downloaded it and installed it and all went well, so far. I then rebooted my machine.
I then downloaded Lightroom 2.6 again and installed it. When I tried to run it with all this new stuff installed, same problem. This is beginning to get a bit more techie than I can deal with. I do have a disk with the Operating System on it, but I am reluctant to reinstall it (Windows 7) in case something goes wrong. If it did, then this is just way beyond my technical knowledge and understanding of things to fix if anything that could go wrong, does go wrong. I have had Dell systems for years and have never, ever had these kind of problems with getting applications, even trial ones, to run. As far as access privileges, I am the administrator for this machine and I have never been asked for access privileges on any file, folder or other unit, so I will assume (?) that this is not an issue. If it was, I would have expected it to turn up by now, as I have had this machine for about three months, maybe four. Ambienttroutmask, I really appreciate all your help and suggestions and thank you very much for them all...
I do not believe that, or fail to understand why, such a high level of technical knowledge should be required to make things like this, that should be simple - download - install - run - test - decide on purchase (or not), to run. I do believe I am entitled to one year of in-home Dell service, so maybe I will contact Dell Canada and see what this is all about. Maybe if I could get someone to come have a look, then this can be resolved.
I am now at my proverbial wit's end and have no idea where to go from here. Ideas? Thoughts? Anyone?
Regards,
WesternGuy

Capture problem with trial SW (CS4 Premiere Pro / Canon DM-MV1E,OPTURA in USA)

Hi,
I have used this camera earlier with older premiere 6.5 with Canopus DVRaptor-RT firewire. Those files I can not use with CS4 Premiere because Canopus is using their own codec?
Now I try with CS4 Premiere Pro with motherboard firewire (Asus P5AD2-E Premium).
Timeline is running in capture window during capture but there is no video and no audio (and no file....). During capture "Capture duration" is 0. When I stop capture there is text "Recorder captures no frames".
Device control works ok (atleast Rew, Play, Stop, FF).
Yes I know my camera is old...... Is it so that this camera don't work anymore with this SW?
Asko

I am having a similar issue with trial ver. PPR CS4 but with a Panasonic AG DV2000.
Where did you find the MV1 setting or was that something to do with your cannon settings?
I have the trial ver. loaded on a windows 7 64 box.
I get message to reset my VTR.
No video in capture window.
I currently use the same VTR with Premiere 6 with no issue.
Any ideas ?

Problem with business partner cumulative balance

Hi
I used to used the business partner balance enqury to quickly tell customers what they were due to pay up to the start of the month. I just looked at the cumulative balance of the last transaction of the previous month and that was it. I know I could run an aged credit report but this was quicker and easier. However since upgrade to 2007A the cumulative balance does not give the amount due for a part paid invoice so this does not work any more.
Question is has anyone writen a fast query or other report that calculates the cumulative balance based on outstanding amount?
Thanks in advance
Derek

Hi!
Run this in SAP B1 Query Manager
SELECT     T0.CARDCODE, MIN(T0.CARDNAME) 'Customer Name', SUM(T0.DOCTOTAL - T0.PAIDTODATE) 'Last Balance'
FROM        DBO.OINV T0
WHERE     DOCSTATUS = 'O' AND T0.DOCTOTAL - T0.PAIDTODATE > 1 AND T0.CANCELED = 'N' AND DATEPART(month,T0.DOCDUEDATE) < DATEPART(month,getdate()) AND T0.CARDCODE = '[%1]'
Group By T0.CARDCODE
UNION ALL
SELECT     T0.CARDCODE, MIN(T0.CARDNAME) 'Customer Name', -SUM(T0.DOCTOTAL - T0.PAIDTODATE) 'Last Balance'
FROM        DBO.ORIN T0
WHERE     DOCSTATUS = 'O' AND T0.DOCTOTAL - T0.PAIDTODATE > 1 AND T0.CANCELED = 'N' AND DATEPART(month,T0.DOCDUEDATE) < DATEPART(month,getdate()) AND T0.CARDCODE = '[%1]'
Group By T0.CARDCODE
ORDER BY T0.CARDCODE

I'm having problems with my Apple ID balance.

Hello I had bought 2 gift cards for my apple balance, I bought a $25 and. $15 cards, on the 25$ one i only spent $20 and only had $3 left, on the $15 one I spent $10 and now I only have $2 left Plzz help me

Probably your previous store credit balance was not uptodate. This can be happen if you are using multiple devices for purchases. I would suggest to check your purchase history to find out, what you have purchased and how much it all cost. In your purchase history you will also find the payment method which was used at time of purchase (in case you are using different payment methods). Please have a look into that article to check your purchase history:
http://support.apple.com/kb/ht2727
Note: There is no way to check the redeemed iTunes Store gift cards but you can contact Apple support and asked them.

Download to EXCEL - Problem with truncating leading zeros

Hello Experts
I have Reqs-
When i download data into EXCEL some of the fields like PERNR lets say if the valus of the PERNR is 01000032 then in the excel it is displaying it as 1000032 or esle if a DATE field with value 02/03/2007 (obtained by concatenating MM / DD / YYYY) it is displaying in the excel as 2/3/2007.
I dont want the truncating of zeros to happen.
Any INPUT will be rewarded with points.
Thanks
Vj

Hi,
Try to use this FM.
There are two very important functional modules ,which are used to add zeroes(0) & Remove zeroes(0) from numeric string input respectively.
The functional module CONVERSION_EXIT_ALPHA_INPUT comes handy in this situation.
Another functional module CONVERSION_EXIT_ALPHA_OUTPUT is used to reverse the Operations performed by the above FM.
Let us look up the first case.
Function Module: CONVERSION_EXIT_ALPHA_INPUT
PARAMETER:
Importing Parameter: Input   of type C
Exporting Parameter: Output of type C.
This function module is use to add zeroes (0), to the left of the numeric string input ,after making the input numeric string right justified .
If the input string is non-numeric (including alphanumeric) , string is stored as left justified ,with blanks towards the right.
If the string is numeric say vehicle number , vlcvehicle-vhcle( 10 char)
INPUT : 123456
OUTPUT : 0000123456
Whereas if string is non-numeric
INPUT :    ABCD
OUTPUT: ABCD.
Hope this will solve your problem.
Regards
Balaji

InDesign CS3: Problem with Trial

Hello,
I have no tried installing the trial on three different machines and have gotten this message each time I have tried to launch the program and begin the trial:
"A problem was encountered while trying to load the trial period for Adobe InDesign CS3.
Click quit to see if restarting your computer or reinstalling the software fixes this problem. Otherwise, click Continue to display a screen where you can enter a valid serial number to begin using the product without trial."
All of the machines I have tried to install on are running Windows XP SP2. Thanks for any help!

I have the exact same issue.
The product installed OK, but when I choose "Start 30 day trial" I am simply told "A problem was encountered..."
The download is from Adobe web page, 15 August 2008.
File size 459.188.632 bytes, MD5 = 27d34a3d4e5c5f08992b74c9747f4280
Payload code = 24D77A7C-E10B-4057-9974-FAB8BFDAC853
Payloads/Setup.xml: 458H Setup version="1.0.135.0"
The software was installed on a fresh PC 2GHz, 1Gb memory, with win XP.
It is totally frustrating that not even a trial can start. At least Quark gets that one right.. I truly understand people that search for a key generate online. All I needed was a trial while I wait for my paid copy to appear.
Btw: InCopy will not even install, here I am simply told: "You can only run one installer at a time".. although InDesign was already completely installed.
Shame on you, Adobe installer team. Shame on you.

Problems with trial un-installation. Please help

Some time ago i tried adobe photoshop CS4, and used the trial till it expired. About a month afterward I wanted to delete the files from my computer. I was rather unfamiliar with how un-installers worked, and I did not know they existed. I simply went to my finder, typed photoshop, and deleted most of the files. As it turns out, i deleted the re installer, or how ever that works. I recently received photoshop CS4 extended as a gift and I attempted to install it. This was unsuccessful, the first screen that came up with the installer said I still had files from the trial on my computer, and that i should un-install them. I was told by someone who knew more about adobe products that I had to go to utilities to uninstall it . I tried this and it said critical files were missing, and I need to reinstall from the original media. In that last month or so I have found NO solution to this problem, and I am afraid to delete any other files. I could not find any help on the adobe site, and since i have not registered my product( since I have not installed it) i cannot get direct support from adobe. Please help all I want to do is use photoshop and I hate to be wasting the money of the people who bought it for me. Can anyone give me a solution to this mess?

Try downloading and running the CS4Clean Script:
http://www.adobe.com/support/contact/cs4clean.html
Starting with CS3, you MUST use the Adobe Uninstaller that gets installed in Applications/ Utilities/ Adobe/.
Some users who just dragged the Photoshop folder to the trash or deleted files nilly-willy have been forced to back up their drive, wipe it clean, and install the OS and all applications from the original media. You may luck out and get away with just the CS4Clean Script. Good luck.

Strange Problems with Trial Keynote

Hello,
I downloaded my trial version of Keynote yesterday. I have created a presentation with sound that I uploaded to YouTube last night. When I played it, I wanted to do a few revisions and went back to my Keynote file (ie: changed the Theme and some of the fonts). Since then, I have been unable to re-upload the presentation to YouTube. Incidentally, I also cannot Export it into Flash or Powerpoint.
What is going on here? Am I doing something wrong? I am totally confused because it worked fine yesterday!
Thanks very much,
Bettina

No, unfortunately, I haven't. I did find this blog posting that may help somewhat. When you export to a QuickTime movie, is it out of sync then, too? If so, that may be a related problem for which there are workarounds.
Also, you may find this blog posting informative.
http://blog.jedchristiansen.com/2007/09/21/uploading-keynote-presentations-to-yo utube-with-transitions/

Problem with Trial Balance Zero Balanced Acct

Similar Messages

Maybe you are looking for