Problem with trial version line over my project

I have bougth the normal version after trying the trial version.
The promblem is that the trial line stays in my project.
How can I remove it?
thanks fot helping

shutr1
If the Adobe watermark is in one of your projects that you created during the tryout, the classical approach is to delete the rendered files.
You can use Timeline Menu/Delete Rendered Files for that purpose after you open the purchased Premiere Elements.
You cannot delete the Adobe watermark from an export that you have generated from the tryout.
Please let us know if that information works for you.
Thank you.
ATR

Similar Messages

Problem with the progress line in MS Project

Hi there,
I have a question about the progress line in MS Project.
My boss asked me to see how far we were with the work, so I inserted the column '% Complete' and then the progress line.
Now my boss has a problem with the layout and I don't know how the fix it. The problem is at line 43 and 44, where the progress line indicates that we are behind on that group of tasks. But is it possible for the progress line to not indicate it on lines
43 and 44 but only on lines 45 to 50? So my question is if it's possible to make the progress line go down (vertically) over line 43 and 44 instead of jumping to the back?
It would be much more simple if I could insert lines 43 ad 44 as text but not as a task, so that it just counts as a title of some tasks but nothing more than that. Is that possible in Project?
(Lines 45 to 50 are subtasks for line 44, and 44 is a subtask for 43. So line 43 is the main task.)
Normally there was a picture here but I couldn't upload it because my account is not yet verified... So hopefully you can understand the problem with the text.
If anyone could give my some advice or the solution, that would be great!
Thanks in advance!

Hi Thunderbal66--
Basically your activity 43 is late because the sub tasks are also late. Thus MS Project shows the situation by moving the progress line backward. The progress line is automatically displayed based on your project progress, there is no way to manually change
it unless you update your project.
I think the question is not there. This is more a matter of project governance and transparency: why not showin that a project is late when it is late and taking the appropriate corrective actions?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Saving problem with trial version

I have a trial version. How can I save a file as an mp3 file. I only seem to be able to save as an sesx file. I cannot "save selection as." Does the trial version not allow me to do this?

bg.thewake wrote:
Not finding this the easiest programme to get around, Bob. Are there any
tutorials I can download just to help me get used to all the functions.
Aside from the documentation that is accessible in the Help menu, there's several resources that are starting to pop up. I found a bunch just searching for "Audition CS5.5 tutorial" on YouTube. There's also some videos that are being made on tv.adobe.com. You can find "Audition" under the Products menu.

Problem with trial version

I have downloaded the trial but when I try to open it I get
an error and the log is below. What have I done wrong?
!SESSION 2007-10-29 02:40:49.722
eclipse.buildId=unknown
java.version=1.4.2_12
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.update.configurator 2007-10-29
02:40:50.346
!MESSAGE Cannot backup current configuration
!ENTRY org.eclipse.update.configurator 2007-10-29
02:40:50.424
!MESSAGE Could not rename configuration temp file
!ENTRY org.eclipse.osgi 2007-10-29 02:40:51.32
!MESSAGE Application error
!STACK 1
java.lang.UnsatisfiedLinkError: no swt-win32-3139 in
java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at
org.eclipse.swt.internal.Library.loadLibrary(Library.java:123)
at
org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:18)
at
org.eclipse.swt.widgets.Display.<clinit>(Display.java:125)
at
org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:381)
at
org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:155)
at
com.adobe.flexbuilder.standalone.FlexBuilderApplication.run(FlexBuilderApplication.java:4 5)
at
org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.main(Main.java:948)
!ENTRY org.eclipse.osgi 2007-10-29 02:40:51.32
!MESSAGE Bundle
update@plugins/com.adobe.flexbuilder.debug.e32_2.0.155577/ [70] was
not resolved.
!SUBENTRY 1 org.eclipse.osgi 2007-10-29 02:40:51.32
!MESSAGE Missing required bundle
org.eclipse.debug.ui_[3.2.0,99.0.0).
!SESSION 2007-10-29 02:41:28.679
eclipse.buildId=unknown
java.version=1.4.2_12
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.update.configurator 2007-10-29
02:41:29.303
!MESSAGE Cannot backup current configuration
!ENTRY org.eclipse.update.configurator 2007-10-29
02:41:29.365
!MESSAGE Could not rename configuration temp file
!ENTRY org.eclipse.osgi 2007-10-29 02:41:29.911
!MESSAGE Application error
!STACK 1
java.lang.UnsatisfiedLinkError: no swt-win32-3139 in
java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at
org.eclipse.swt.internal.Library.loadLibrary(Library.java:123)
at
org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:18)
at
org.eclipse.swt.widgets.Display.<clinit>(Display.java:125)
at
org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:381)
at
org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:155)
at
com.adobe.flexbuilder.standalone.FlexBuilderApplication.run(FlexBuilderApplication.java:4 5)
at
org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.main(Main.java:948)
!ENTRY org.eclipse.osgi 2007-10-29 02:41:29.911
!MESSAGE Bundle
update@plugins/com.adobe.flexbuilder.debug.e32_2.0.155577/ [70] was
not resolved.
!SUBENTRY 1 org.eclipse.osgi 2007-10-29 02:41:29.911
!MESSAGE Missing required bundle
org.eclipse.debug.ui_[3.2.0,99.0.0).
!SESSION 2007-10-29 05:02:43.02
eclipse.buildId=unknown
java.version=1.4.2_12
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.update.configurator 2007-10-29
05:02:43.796
!MESSAGE Cannot backup current configuration
!ENTRY org.eclipse.update.configurator 2007-10-29
05:02:43.906
!MESSAGE Could not rename configuration temp file
!ENTRY org.eclipse.osgi 2007-10-29 05:02:44.544
!MESSAGE Application error
!STACK 1
java.lang.UnsatisfiedLinkError: no swt-win32-3139 in
java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at
org.eclipse.swt.internal.Library.loadLibrary(Library.java:123)
at
org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:18)
at
org.eclipse.swt.widgets.Display.<clinit>(Display.java:125)
at
org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:381)
at
org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:155)
at
com.adobe.flexbuilder.standalone.FlexBuilderApplication.run(FlexBuilderApplication.java:4 5)
at
org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.main(Main.java:948)
!ENTRY org.eclipse.osgi 2007-10-29 05:02:44.549
!MESSAGE Bundle
update@plugins/com.adobe.flexbuilder.debug.e32_2.0.155577/ [70] was
not resolved.
!SUBENTRY 1 org.eclipse.osgi 2007-10-29 05:02:44.550
!MESSAGE Missing required bundle
org.eclipse.debug.ui_[3.2.0,99.0.0).

Here is the solution; There is another post concerning the
issue
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=539&threadid=1261517

Adobe Photoshop CS3 - Problem with Trial

I recently downloaded and installed Adobe Photoshop CS3 directly from Adobe as it is the latest version my Mac supports. Upon start up, I am greeted with two options: a) I have a serial number for this product. and b) I want to try Adobe Photoshop CS3 free for 30 days. Seeing how I am simply looking to evaluate and have not purchased said product, I selected option b.
However, upon clicking "Next >" I am greeted by an error. "Problem with Trial" I am left with nothing but wasted time. This is the first time I have ever installed Adobe Photoshop CS3 so I do not understand why it will only allow access with a serial number. Any help to allow me to try this software is appreciated.
Thanks.

Could the trial have a time bomb in it that prevents use after several years? There's not much of a need for Adobe to allow trials to run for so long after the product's life cycle has concluded.

Reader 9 - problem with pdf version 1.0 and descenders

2 big problems over here:
* Reader9 will not properly open files created as pdf version 1.0/1.x
all text is cut off about 2/3 of the way down, whether or not in fields.
* Any pdf file version above 1.0created with any version of GhostScript does not have the previous issue, However - no descenders of any font are coming out.
We do not have either problems with any version of Reader prior to 9

Hi creamac,
Welcome to communites
Please install vmware tool and then on vmware task bar select connect or unplug usb drive . You
will find that on right hand corner above to task bar of host machine .
"Nature always wears the colors of the spirit."

"Problem with Trial - problem loading trial period for Adobe Photoshop CS3"

Hello,
I installed Photoshop CS3 Trial and whenever I run it and choose to begin my trial period I get the following error message:
"Problem with Trial - problem loading trial period for Adobe Photoshop CS3".
I tried uninstalling and reinstalling, and even ran the Adobe CS3Clean Script but nothing seems to help.
I should note I never installed any earlier version of Photoshop on my system (I use a fresh copy of Windows XP with only a few programs installed).
Any suggestions will be appreciated.
Thanks,
David

i had the trial of photoshop on and the trial has run out my friend has given me a disk with adobe photoshop on and i cant do it beacause of the regestry code the photoshop puts in after the trial has ended to tell my pc that i cant have photoshop on my computer again :(:( now i have herd that you can remove the codes but it is quite hard well iam willing for this challenge and if anyone could help me i would reall welcome your help or if anybody has got the link to a tutorial to tell me hoe to do it i would aprecitae that to thank you all very much and post bak soon please

File created with Trial version cannot be opened by Captivate 5.5 (Ensure that the file isn't open, the file isn't damaged....etc.)

Hi,
I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

Problem downloading trial version of Lightroom 4

I am trying to download the trial version of Lightroom 4 for Windows (English), but nothing happens when I click on the "Download" button. This is very weird. I am a current user of PSE 10, and I would like to see if I should also get Lightroom 4, because I find that the Organizer in PSE is too slow, and hope that Lightroom would be much better from comments I read on the Internet.

Thanks. It worked with Google Chrome, but was not working with Internet Explorer.
Date: Tue, 27 Nov 2012 07:16:13 -0700
From: [email protected]
To: [email protected]
Subject: Problem downloading trial version of Lightroom 4
    Re: Problem downloading trial version of Lightroom 4
    created by Vikrant Rai in Downloading, Installing, Setting Up - View the full discussion
When you click Download, the download should start automatically. It could be that a pop-up/download blocker/anti-virus is preventing the download. As a first step, you could try using a different web browser to download from the following link: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroo m
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4877048#4877048
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4877048#4877048
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4877048#4877048. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Error - Problem With Trial

Hi all
I downloaded de Adobe Captivate 3, at choose to enter a valid
serial or trial period, choose trial period, and error message
appear.
“Problem With Trial”
Using Windows Xp SP2
Not using dual Boot
The Temp and Tmp using same folder
A Time a go Using Trial Version flash but I formatted my PC

Nobody can tell you anything without proper system info or other technical details. Inevitable Muse's licensing is tied to CC, so check that as a start:
Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Problems with latest version of Muse

I'd like to report some problems with latest version of Muse. Its actually all related with scroll effect.
1. In previous version I had a group of rectangles and when I added to them motion (initial motion: 0 everywhere, final motion: 0 everywhere) they where sliding nicely down during scrolling my page, and it happened only in y line (horizontally). Now its moving also on the right and left, when I am changing size of window. Other thing is that in firefox this group of rectangles is pinned to bottom of window.
2. I have footer that I want to be always pinned to the bottom of window. The footer is a group of objects: rectangle + one png file with hyperlink, and one text with hyperlink - and of course it worked perfectly in previous version, but now finally when I export the page I have only the rectangle without hyperlink on the bottom of the page and the rest is missing.
I hope I explained it clearly? I did my best :-)

I have a same problem like no.2.
Finally, I fixed it.
First, You have to ungroup the footer objecs.
Second, Group again that.
Then export your site.
Please try this!
I hope this will be of some help.

Problem downloading trial version, it is not downloading

problem downloading trial version, it is not downloading

Thanks. It worked with Google Chrome, but was not working with Internet Explorer.
Date: Tue, 27 Nov 2012 07:16:13 -0700
From: [email protected]
To: [email protected]
Subject: Problem downloading trial version of Lightroom 4
    Re: Problem downloading trial version of Lightroom 4
    created by Vikrant Rai in Downloading, Installing, Setting Up - View the full discussion
When you click Download, the download should start automatically. It could be that a pop-up/download blocker/anti-virus is preventing the download. As a first step, you could try using a different web browser to download from the following link: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroo m
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4877048#4877048
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4877048#4877048
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4877048#4877048. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

Can this extension be used with trial version of dw8?

The extension:
http://www.projectseven.com/extensions/info/vscroller/index.htm
Can ANY extension be used with trial version?
After I down loaded it and tried to open dw, I got a dialog
box in which the text was not visible. All I could do was hit 'ok,'
which quit it.

Trial versions are fully functional so all extensions should
work in it.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"thighmister" <[email protected]> wrote in
message
news:eud87r$r06$[email protected]..
> The extension:
>
http://www.projectseven.com/extensions/info/vscroller/index.htm
>
> Can ANY extension be used with trial version?
>
> After I down loaded it and tried to open dw, I got a
dialog box in which
> the
> text was not visible. All I could do was hit 'ok,' which
quit it.
>

I'm paying for my creative cloud (student version) and my after fx trial version is over but it keeps asking me for the serial number. What can i do?

I'm paying for my creative cloud (student version) and my after fx trial version is over but it keeps asking me for the serial number. What can i do?

Moving this discussion to the Creative Cloud Download & Install forum.
Anebz I would recommend fixing the connection error preventing the applications from contacting our activation server. You can find details on how to resolve the connection error at Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.

Problem with trial version line over my project

Similar Messages

Maybe you are looking for