Problem with trimming from a cs2 project

Hello
I'll get straight to the point.
I started editing a projects in premiere pro 2 and i then decided to open that project from my new pc(win 7,64 bit) which has cs5 installed,
problem is,when i opened the project everything was there but not exactly where it suposed to be, clips where trimmed wrong,sound clips whee desynchronized from the video.
Have i done something wrong ? Any solutions?

Try importing to a later version like CS3 or CS4, then saving and then importing the newly saved project into CS5. The differences between CS2 and CS5 may be too big and cause the problems you experience.
If you don't have access to these versions, adhere to the old wisdom: Finish your project in the version you started with.

Similar Messages

Windows 8.1 Problem with games from windows store.

I've got a problem with games from windows store. The installation is going well without any problems, however when I try to open it it's loading and then it turns off. The same problem happens when I try to use Games for Windows. I've use a sfc scan and
it shows some errors but unfortunately it cannot fix them. Should I share the CBS log or find the solution somewhere else? I hope you help, best regards.

Hi,
According to my experience, the problem like store game app open failed probably caused by hardware driver. such as Audio and Graphic driver. So, first of all, please try to reinstall these two driver to fix this problem for test.
In addition, for SFC scan failed problem, it can be caused by many reasons, I would suggest you use another command to fix your system for test.
Dism /Online /Cleanup-Image /ScanHealth
Also you can test SFC command in Windows 8.1 safe mode.
Thirdly, if problem persists, please check Event Viewer, generally speaking, it would record the app open failed events.
Roger Lu
TechNet Community Support

I have problem with buying from iTunes Store

I have problem with buying from iTunes ??!!
I've put all of my info cards
What can i do ?!

Are you trying to spam the forum with 6 the same posts?
Please give more details of your problem and answer the question below:
Is the app available in your country?
Are you using the App Store for your country?

Hi. I have a problem with downloading from app store while last three days. An error did mot allow me to that. It's number is 1009.

I have a problem with downloading from app store while last three days. An error does not allow me to take any app. The error number is 1009.

Thats the ugliest code I've seen in a while and may be hampering your abilities to debug it. No offense - you have to start somewhere - think of it as somewhat constructive criticism.
However, I cannot find any place where this is happening. Its happening on line 193.
Also, this only happens when you try to move certain pieces to certain squaresThat might be a clue. Try printing out the indexes before line 193 and see what happens. Maybe use a debugger to step through your code.

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

Move or Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.

K8t Neo2 problem with resume from standby after BIOS flash

Previously while using the 3.2 BIOS and a Winchester 3200+, Both Standby and hibernation worked perfectly almost without fail. Since I flashed the BIOS to 9.3 and installed an X2 4200+ I have had a problem with resume from standby. The machine starts up OK but the 2nd processor core (cpu1) is almost maxed out and stays that way. Task manager shows total cpu load as about 45-50% (all on cpu1) but shows no running process using any cpu load, just the usual System Idle process at about 99%. The only way to get it back down to normal again seems to be to reboot. By Contrast Hibernation works fine, with no increase in cpu load after resume. I have all the latest MS patch's installed (I think!) the AMD dual core driver and the MS and AMD dual core optimizers. Any ideas what is going on?

Noticed last night that S! standby seems to work OK. Also was experimenting with a fresh windows install on a spare hard drive (checking on another problem). The fresh windows install appeared to work with S4 hibernation, so it looks like that is the answer to that problem. However the problem with high cpu load on the second core after resume from S3 suspend to RAM standby was still present. This problem is so specific and so repeatable (it does it every time without fail), that I feel there must be some very well defined reason for it. Unfortunately I have no ideas what could be wrong. Have now tried Windows re-install, latest cpu drivers, AMD dual core optimizer, MS dual core optimizer, Cool'n'quite disabled/enabled, and various others and suspend to RAM still gives the same behaviour

Problem with trimmed project

The project in Premiere Pro CC for Mac was trimmed by project mahager, then when I open trimmed project, clips in sequence was in nonexistent part of original video file.
Like this:
What is that? How can I fix it?
thank you in advance.
Yermek

This is a problem I have from time to time with Trimmed Projects. Even though the media is there, for some reason Premiere can't see it. It's maddening because it's very hard to duplicate and thus troubleshoot. But when it happens, there's no sensible explanation.
Our discussion on this problem is here:
Re: Trimmed Project sequence not working
Here's one thing you can try that sometimes works:
1. take all your media out of the trimmed project folder and put it in a different folder somewhere else
2. launch the trimmed project
3. the offline window comes up automatically with a list of missing clips. UNCHECK the align timecode box and manually reconnect all the trimmed clips.
4. zebra stripes gone. sequence plays.

Problems with color from Photoshop to InDesign CS2?

Hi all,
Couple of questions:
When I select "Proof Colors" from "View", the color changes a little bit. Is this normal?
Also, on "View", "Proof Setup", which one should I select "Document CMYK" or "Working CMYK" or some other "Custom"
thanks for all your help,
Alex

>When I select "Proof Colors" from "View", the color changes a little bit. Is this normal?
It's not abnormal, but it will depend on what color spaces the objects are in and the color space that you choose to proof.
>Also, on "View", "Proof Setup", which one should I select "Document CMYK" or "Working CMYK" or some other "Custom"
You have a lot of choices for how to set up color management. I usually leave my settings set up for my most common situation, US Sheetfed coated and Adobe RGB, but if I have a special job I can reassign the document color space (notice I said Assign, not convert, in order to preserve the native object color numbers). You can proof the color in either the Working CMYK (the one in the color settings) the Document CMYK (if that's different) or something else entirely if you are repurposing an existing document for a new output method.
When you proof colors, InDesign calculates the conversions on the fly and displays the results. RGB objects will almost always show some shifting due to gamut differences, but the type and degree will depend on the rendering intent you specify. CMYK objects tend not to show as much shifting because the gamuts are likely to be closer, but again it will depend on the exact profiles and intents. Objects that are already in the chosen proofing space should not show any shift at all.
There is a caveat here regarding working in one space and outputting in another: If you want the colors to be as close as possible you will be converting to the new profile, which will by necessity change some color numbers to match the appearance. This is not usually a problem with things like photographs, but other things, like type, which is created as 100% K can be converted to a four-color mix which is not good. If you know the output conditions, I always recommend setting the document CMYK to that space when you start.
Peter

Problem with Deployments of web service Project as EAR in weblogic console

Hi All :-)
I was facing the problem with the Deployments of web service(java class) as EAR.I created the one web project associated with EAR project. After my development i exported this project as EAR and deployed the same on the weblogic console.....But time it will work fine and sometime it Deployments status will not become active (its running status) and failed after activate the changes.
Can any body tell me the real problem with weblogic console for Deployments?
Please tell me the solution...it?s urgent for me...If you know the answer please mail me on [email protected] or reply here on forum
Thank you very much for your time.
Rgds
Ranjit

I received the same message and resolved it by adding the following jars to the classpath. All these jars came from the weblogic92 directory:
server/lib/ant/ant.jar
common/lib/apache_xbean.jar
server/lib/jsafe.jar
server/lib/weblogic.jar
server/lib/webservices.jar
server/lib/webserviceclient.jar
server/lib/webserviceclient+ssl.jar
server/lib/schema/weblogic-container-binding.jar
server/lib/xbean.jar
hth,
John

Problem with output from report to excel, calling the report from form 10g

Hi everyone, I'm having a problem generating a excel from a report, which is called from a form, I'm using Forms 10g. The problem is this: My report has a variable number of columns. These columns appear according to data obtained from the database, these columns are dates, In vesion 6 excel file generated shows the columns one after another starting in column A1 to column CP. I mean that the dates are correlative. But in version 10g the excel file generated shows the same report starting in column A to column T, only shows the 20 dates correlative corresponding to this columns, the rest of the dates are down the excel sheet in groups of 20 dates, it's something, the file in 6i grows across and in 10g grows down the excel sheet. The report (rdf file) is the same in 6i and 10g, I compiled the 6i version to obtain the 10g version. The excel sheet generated in 10g looks like the report was in pdf format, because PDF format, cuts the report in pages and the file grows down, if I generate the report in PDF format it has the same structure excel file in 10g has. I hope yo can help because I have days trying to solve this but I have no succes. If someone could help I could email the excel files generated in two versions. Here I put the code I use to generate the files in 6i and 10g. I have tried with DESFORMAT=SPREADSHEET in 10g but the result is the same. Thanks for your help. Greetings for all.
Code for version 6i (Works Very well)
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
     BEGIN
nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
          BEGIN
          nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
     BEGIN
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSE
          BEGIN
                    nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');
END;
Code for version 10g
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
--byt12122007.sn
repid REPORT_OBJECT;
     vURL VARCHAR2(500);
     rep_status VARCHAR2(20);
     vJobID VARCHAR2(100);
     v_rep VARCHAR2(100);
VAR NUMBER;
w_name_repserv VARCHAR2(30);
--byt1212007.en
BEGIN
     --w_name_repserv:=F_OBTIENE_SERVREP;
w_name_repserv:='repserv';
pl_id := Get_Parameter_List('mytmp_params');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('mytmp_params');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
     cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
/*Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );*/
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
BEGIN
     repid := find_report_object('tdvenrli1577');
--nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1577');
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
BEGIN
     repid := find_report_object('tdvenrli1578');
          --nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1578');
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
BEGIN
     repid := find_report_object('tdvenrli1576');
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          --nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1576');
          END;
ELSE
BEGIN
     repid := find_report_object('tdvenrli1545');
                    --nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1545');
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESNAME,nom_arch);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'File');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'DELIMITED');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, w_name_repserv);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_OTHER, 'paramform=no');
     v_rep := RUN_REPORT_OBJECT(repid, pl_id);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED')     LOOP
          rep_status:= report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          vJobID := SUBSTR(v_rep, INSTR(v_rep, '_', -1)+1);
          vURL:='/reports/rwservlet/getjobid'||vJobID||'?'||'server='||w_name_repserv;
     END IF;
     WEB.SHOW_DOCUMENT(vURL, '_blank');
     IF NOT form_success THEN
          MESSAGE('Error: PL/SQL held against Button failed to execute');
          RAISE FORM_TRIGGER_FAILURE;
     END IF;
/*Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');*/
END;

There are two problems with your VI. First, the basic logic of writing/appending to a file (Excel, TDMS, anything) should go something like this: Open the file, position yourself at the end of the file, then, in the loop, acquire data and write it to the file until you are finished with data acquisition. When you exit the acquire/write to file loop, then close the file. In particular, the opening and the closing of the file should not be inside the loop.
As others have pointed out, writing to Excel might not be optimal, particularly if you are acquiring data at a high rate (and would therefore be writing a lot of data). We actually use Excel in our data acquisition routine, mainly reading from a WorkSheet to get the parameters of a particular stimulus, but also writing the outcome of the response to the stimulus. As it happens, our "acquisition rate" in this example is on the order of several samples per minute, so there's no problem using Excel (we also sample 16 channels of analog data at 1 KHz -- this gets written as a binary file).
Second, if you really do want to use Excel, use the (existing) Excel file to which you want to append as the "template" argument of the New Report function. Then use the Excel Get Last Row function to position yourself at "end of file", as noted above.
Good Luck.
Bob Schor

Problem with playback from mac to pc?

I recently Created a peroject on a mac containing a large quantity of markers and clips, when I transfered it to my home pc I recieved a notice saying that I needed a third party program for the video to play properly. When I did play the video, its frame-rate was terrible and couldn't keep up with the audio at all. Is this just a problem with the video transfered bit rate or with the actual changing of mac to pc? please help...
transfering has worked before between the two computers and the t3i I use works also with each computer, I wonder if any effects could create this?

I've never seen that message. What exactly did it say? You're using the native media from the T3i, it hasn't been converted, it's never been inside of Final Cut Pro?

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Problems with rendering a 16:9 project with Chapter markers to iDVD

Hi there
I'm having an issue where I'm trying to export a DVD for a client with chapter markers as it's required. Problem is when I put the project into iDVD the project squishes back to 4:3 ratio.
One solution that was on here was to use the Quicktime Conversion to create a 16:9 video however when I use Quicktime conversion I lose the chapter markers
I need to have both 16:9 ratio and Chapter Markers in the DVD how do I overcome this problem?

Anamorphicizer didn't work.
I can use Quicktime Pro cause I currently have Quicktime X on my computer (snow leopard) which doesn't have a Pro upgrade.
Any myDVDedit is really confusing to use do I have to export the DVD into a VIDEO_TS file to fix it? I'm still puzzled

Illustrator CS6 - Organisation problems with printing from PDF

Hi everybody
I working with the Illustroartor for some times now and I get better every time, but now its appears that’s I have a organization problem with my Illustrator CS6 and maybe somebody can help me here.
My problem: I create for example a logo and this logo I like to print on an Objekt like a Paperclip or a Lighter. I have now a print template as a PDF File (see attachement) with serveral predefined print areas. Around 100 predefined printing areas are on the PDF File and the only way to add my logo into this 100 predefined printing areas is by using the funktion “copy/past” but this takes long time and I have to adjust each single logo into the predefined printing area by hand … so this way don’t make really sense and is also very time consuming.
My question is: Is there any way to automate this process by using e.g. the artboard funktion or some other functions?
I would appreacte any help in this case!!!
Thank you very much in advance.
Nice regards
Klaus

Hi Alex,
There is newer version of Data Modeler (3.0 EA2) and it is free
You can download it from here
http://www.oracle.com/technetwork/developer-tools/datamodeler/ea2-downloads-185792.html
Regards
Edited by: Dimitar Slavov on Dec 9, 2010 2:15 AM

Problem with stream from radio

Sorry for my english, I wanted to posted on my local forum but it have problem with server and doesn`t work
So on windows all channel this radio work good but on arch the main channel can`t running
I suppose it`s depend of my iptables setting, I did all setting by this how to http://wiki.archlinux.org/index.php/Sim … wall_HOWTO
from part " Setting up a single machine"
This is adress radio channel with I have problem http://87.118.100.10:7000, in audacious I have only info "prebuffering" and nothing else
vic can run this channel but stream is very dashed. It`s very strange because on windows all work good
I tryed cut iptables in rc.conf in sector daemon and reboot but it was similar
I sent this adress to my friend who use too arch and he had got the same problem
Do you have idea why i have this problem
Second time I`m sorry for my english but please help me
Last edited by yellowfox (2007-02-16 12:21:01)

Your english is much better than my american, so maybe we can communicate somehow.
I don't use iptables since I have a router handling that for me.
Trying http://87.118.100.10:7000/ with xmms, vlc, amarok and mplayer resulted in not much. VLC did give very choppy playback, while xmms got in a buffering/prebuffering loop.
Using amarok or mplayer to open http://87.118.100.10:7000/listen.pls resulted in good music. Wish I could understand the lyrics but I could listen to it.
Opening http://87.118.100.10:7000 in firefox leads to a Shoutcast Admin control panel where the link Listen results in a playlist file.
It also tells me that they are stream aac sound, so, maybe the right plugin or a recompile after installing faad will make your chosen program work.
Good luck and have fun

Problem with trimming from a cs2 project

Similar Messages

Maybe you are looking for