Problem with two USB-gaming devices

I have a weird problem on the K8T Neo FIS2R. I have two USB gaming devices plugged in (Saitek X45, Thrustmaster Force Feedback GT). The Saitek is "on" every time since it does not have an external poer supply. The Thrustmaster I have to turn on, since it has Force Feedback. Both of these devices work perfectly when the othe one is inactive (Thrustmaster in off-position or X45 unplugged). But if I want to use the wheel with the X45 plugged in it just does not work right. If I check under the windows devices both of them work fine. But when it comes to ingame action the wheel is al f***** up. It seems, that the X45-axis is colliding with the wheel. I was using this combo on my former nForce2 board without any problems. Any clues?

Hi
Quote
it's almost as if a certain % of these boards have usb problems and half don't :(
Well then, lets find out which USB drivers are being used
The XP original 1.1
The XP updated 2
or the VIA driver from Companion CD.
Are they all on same Bios?
If Ports are reacting differantly, it is more likely to be a driver or Bios issue
Cheers
jocko

Similar Messages

Problem with detecting USB devices.. something abt ehci-hcd??

Hi All,
I have a DELL E6410 laptop. I have a problem with connecting USB devices.
Whenever a power event (such as connecting/disconnecting of AC adaptor) happens, my laptop stops detecting any USB devices and any changes that happen on the USB ports. That is, say an external mouse is connected to the laptop, the mouse stops functioning, and if I connect a mouse/USB_stick or any such thing to the computer, the device is not detected.
dmesg output show that any connecting/disconnecting events are not detected by the computer. lsusb output too shows the same thing.
To solve the problem, I need to rmmod the module ehci-hcd and modprobe it back. That is, I have to run the commands rmmod ehci-hcd followed by modprobe ehci-hcd. Then, this problem goes away until the next power event happens.
This event does not happen all the time, but it happens very regularly.
Here are the kernel and laptop specs..
uname -a
Linux myhost 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64 Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz GenuineIntel GNU/Linux
Kindly help me on this issue.
Thanks

This is the output of kernel.log when I unplug my AC adaptor with the external USB mouse connected.
Sep 12 11:18:33 localh ost kernel: [ 591.015557] EXT4-fs (sda6): re-mounted. Opts: commit=600
Sep 12 11:18:37 localhost kernel: [ 595.478866] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Sep 12 11:18:37 localhost kernel: [ 595.478919] ehci_hcd 0000:00:1a.0: PME# enabled
Sep 12 11:18:37 localhost kernel: [ 595.498827] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Sep 12 11:18:37 localhost kernel: [ 595.498877] ehci_hcd 0000:00:1d.0: PME# enabled
After this the the mouse goes dead (the light on the mouse also goes off).
If I disconnect the mouse at this stage, there is no change in kernel.log. If I the mouse back too, there is no change in kernel.log.
Now, when I turn the AC adaptor on, this is the output on kernel.log
Sep 12 11:22:16 localhost kernel: [ 813.917712] EXT4-fs (sda6): re-mounted. Opts: commit=0
Sep 12 11:22:16 localhost kernel: [ 813.977405] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.977453] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.980838] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.980874] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 814.075104] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xd6970000-0xd69703ff] (PCI address [0xd6970000-0xd69703ff])
Sep 12 11:22:16 localhost kernel: [ 814.075148] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Sep 12 11:22:16 localhost kernel: [ 814.075189] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
Sep 12 11:22:16 localhost kernel: [ 814.075256] ehci_hcd 0000:00:1a.0: PME# disabled
Sep 12 11:22:16 localhost kernel: [ 814.075279] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 12 11:22:16 localhost kernel: [ 814.075295] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Sep 12 11:22:17 localhost kernel: [ 814.228224] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xd6950000-0xd69503ff] (PCI address [0xd6950000-0xd69503ff])
Sep 12 11:22:17 localhost kernel: [ 814.228246] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Sep 12 11:22:17 localhost kernel: [ 814.228273] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
Sep 12 11:22:17 localhost kernel: [ 814.228310] ehci_hcd 0000:00:1d.0: PME# disabled
Sep 12 11:22:17 localhost kernel: [ 814.228324] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 12 11:22:17 localhost kernel: [ 814.228333] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Sep 12 11:22:17 localhost kernel: [ 814.614404] usb 2-1.1: reset low speed USB device number 3 using ehci_hcd
At this point, the mouse comes back to life (its light begins to glow) and I can move the mouse pointer on the screen.
The output of the grep command that rwd gave is too big (16000 lines) to be pasted here..
Thanks,

Problems with the USB Ports

Hi there,
I writing this because I'm having some really big problems with my USB ports.
A few days ago I plugged in an USB-Hub that was quite cheap. Suddenly a window popped up saying that a USB device was deactivated because it "needed" to much power. Since this happening, two of those windows keep popping up everytime I boot the MacBook. I called Apple and got some help: I had to delete some .plist files and clear some caches. The man who helped was able to find the error and deactivate the notification, he also told me to make a PRAM- and a SMC-reset. The man said that it's just a software problem and that I have to reinstall the system if we don't find a solution. So, one day later I reinstalled the system (Lion) and not only didn't it help, the two notification windows were popping up again...everytime I booted the Mac. So I decided to formate the whole hard drive and install Snow Leopard -> still the problem with the USB ports. After that I installed Lion -> still the problem with the USB ports. I even tried to extract the .kext files that are important for the USB functionality from an earlier Combo Update, but it didn't help either. The point is, that the Mac doesn't recognize my external hard drive or any of my iDevices. Sometimes it recognizes USB sticks, but only after 20 seconds. The data transfer on both USB ports is also very slow. If I'm lucky and Mac recognizes one of my USB sticks, it takes like an hour for 1GB to be transfered on the USB stick or from the USB sticks to the Mac.
I really don't know what to do and need help, especially because my backup data is on my external hard drive which I can't access because of this problem.
I really hope that someone can help me, I'm very thankful for every answer that could help me!
PS: Sorry for my bad English, I hope that everyone understands what I mean, please tell me if you don't get what I'm trying to explain in the text above.
Sincerely,
iLoud
[UPDATE] I downloaded "USB Prober" and copied the Output file, maybe it helps:
Timestamp Lvl            Message
    0.698 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7316), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.698 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.735 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.735 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.735 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.739 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.739 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    0.761 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7320), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.761 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.798 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.798 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.798 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.801 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.801 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    0.823 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7324), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.823 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.860 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.860 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.860 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.863 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.863 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    0.885 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7328), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.885 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.922 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.922 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.922 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.926 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.926 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    0.947 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7332), outstandingIO(0), _interruptReadPending(false) - rearming read
    0.947 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    0.984 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    0.984 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    0.984 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    0.987 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    0.987 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    1.009 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7336), outstandingIO(0), _interruptReadPending(false) - rearming read
    1.009 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
    1.045 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
    1.045 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe - noting status change
    1.045 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
    1.049 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
    1.049 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
    1.071 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7340), outstandingIO(0), _interruptReadPending(false) - rearming read

Oh, sorry, I meant "I'm writing this...".

Problem with SB1240 USB sound card

I'm pulling hair here! I've just bought a SB240. Windows (XP Pro, SP3) detected it and I can select it fine for listening. But when I open Sound and Audio Device Properties and select Sound Recording/Volume, I see the Capture panel with the three inputs, but all the controls are greyed out and immovable. I also use the application "Total Recorder" by High Criteria, in which I can select the SB240 device but the only input line it sees is SPDIF Interface.
I'm stumped. Can anyone help?
John?

&Re: Problem with SB240 USB sound card
Thank you. I did a complete uninstall, including the device itself (from Device Manager) as well as all drivers and any SB related software. As recommended by Creative, I had previously installed the driver software from the supplied CD and that seems to have been the problem.
I let Windows re-detect the SB, but? got a "problem ... device may not work correctly.." during the detection, so I was not hopeful (this had not happened the first time I installed the device).
Nevertheless it now does work fully and is properly configured in "Total Recorder" too.
So I would suggest not using the supplied drivers and software - at least not in WinXP. But it's not very confidence inspiring.
John

LabVIEW exe. with 2 USB Daq devices

Hello All,
I am trying to build a LabVIEW exe. with two USB 6210 data aquistion modules plugged into a USB hub installed inside a 19" rack. I used the DAQ Assistant to generate the LabVIEW code for the aquisition and it works fine. However, when I disconnect the USB cable from the development machine and reconnect later, my I/O are mapped to the wrong modules. Is there a way to map my channel names to the actual module, maybe in MAX, and just include the Max configuration file in my exe? Can I use the DAQ assistant, or do I configure the physical channel names and create my own tasks in MAX and not use the DAQ Assistant?
Any help would be appreciated.
Thanks

Hi Botman,
Unfortunately you are in a unique situation in that you have 2 of the same type device that are removed from the system and reconnected to the system at the same time. However, it is probably not guaranteed that one device will be detected before another consistently. Given your situation I would recommend that you set up your application to programmatically discover the devices in your system. There is an example program here that demonstrates how to do this. In your case I think detecting by serial number would be ideal. All you would need to do is include the LLB file in your project to ensure that all of the necessary VIs are included.
Keep in mind that this will require some modification of your code. You will need to use the lower-level DAQmx functions rather than the DAQ Assistant (which basically serves as a wrapper around the lower-level functions). In the end, adding the VI from the example program above and using lower-level DAQmx functions will make your code more robust because distributing the executable to another system (or even using it on the development system) will not require the user to interface with MAX at all. Let me know if you have any other questions.
Regards,
Andrew W
National Instruments

Problem with two finger scrolling on s440

Hello everyone
I have a S440 (touch version) and some Problems with two finger scrolling on the touchpad.
First, it isn't smooth, i.e.. If I move my fingers it only starts scrolling after a second or so, basically when I've already stopped (unless I move very slow). It then makes up for the lost time by scrolling very fast.
The more serious problem (that makes it practically unusable) is that it randomly jumps back up, often to the top of the page/document, sometimes just a page or so.
The problems are worst with firefox and acrobat, with IE and the Microsoft reader there's no response time problem but the jumping upwards still occurs.
The problem is there with the preinstalled Windows 8 as well as my own Windows 8 Pro (with the original Lenovo drivers). Scrolling with the Trackpoint and an external mouse work fine, as well as scrolling via the touchscreen.
Does anyone have any suggestion if/how I can fix this?

I also have a S440 (non-touch screen), the scrolling on the touchpad worked perfectly when I bought it, no jumping, and scrolling perfectly smoothly comparable to an Mac. But after an upgrade to windows 8.1 which broke many things ( despite upgrading all drivers), I reset my thinkpad which brought it back to windows 8, everything working normally again except the two finger scrolling which is no longer smooth (moves incrementally now), and likes to jump randomly up or down the page, (not always, but enough to make it irritating. I notice this mostly with google chrome and adobe reader as these are the apps I use most frequently.
So my questions is what drivers or settings do I need to bring the scrolling back to the configuration it was when I purchased my S440? My device manager says I'm running thinkpad ultranav with Synaptics driver version 16.6.4.38
Cheers,
Paul

Problem with two of my business rule triggers

Good morning every one,
I have a small problem with two of my business rule triggers.
I have these tables:
pms_activity
csh_cash
csh_integrate_leh
csh_integrate_led
and my process goes like this:
upon approval of a row in my pms_activity table I have a trigger that insert a row in my csh_cash - and in the csh_cash table I have a trigger that will insert in the csh_ingerate_leh and csh_integrate_led.
my problem is pms_activity does generate a row in csh_cash but the trigger in the cash does not fire to generate a row in the csh_integrate_leh and led tables.
I have generated in the following order after I created my business rule:
I have generated the table from the designer (server module tab)
I have generated the CAPI from the head start utility
I have generated the API from the designer
I have generated the CAPI from the designer
I have run the recompil.sql
I have checked that my business rule trigger is enabled and should run on insert and no where restriction
=== this is my business rule logic ======
l_rule_ok boolean := true;
begin
trace('br_csh001_cev (f)');
csh_gl_pkg.csh_gen_integ_jvs(p_id
,p_ref_num
,p_own_id
,p_trt_id
,p_value_date
,p_description
,p_amount
,p_cur_id
,p_gla_dr
,p_gla_cr
,p_gla_pl
,p_gla_rev
,p_gla_eqt);
return l_rule_ok;
exception
when others
then
qms$errors.unhandled_exception(PACKAGE_NAME||'.br_csh001_cev (f)');
end br_csh001_cev;
==== end =======================
Any help will be appreciated as I have struggled with this for two days.
Thanks

hmmm...
Try resetting it again and restoring with the same backup file...
Does the phone work properly once you've reset it before you try restoring? A lot of people here have experienced problems restoring from backups... could be worth forgetting about it and starting from scratch.
You could try contacting your nearest Nokia Service Centre (www.nokia.com/repair) and see if they can do anything - it may need the firmware reinstalling or upgrading... possibly... give them a call though and see.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

I have a problem with my PC mobile device that the keyboard stop working and the mouse also

I have a problem with my PC mobile device that the keyboard stop working and the mouse also

All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner?

I have a problem with my apple mobile device support file

Hey guys!
i'm really having a problem with my apple mobile device..
whenever i connect my cable to my computer WITHOUT the apple mobile device support file/program..my ITOUCH can sync and it WORKS!
but ITUNES doesnt sync in with my itouch because ITUNES doesn't work without the apple mobile device support program.. SO...
i reinstalled my ITUNES
i reinstalled my mobile device support file/program
i even changing it to AUTO (what they said about control panal, program, service, thingy)
I RESTARTED everything.. i think i did almost everything there is in apple support!
with NO LUCK! was it able to connect my computer.. UNLESS i take the apple mobile device support program OUT! @.@
i really need your help guys D:
P.S i dont have a Virus! i have a really good computer that is stable, so i'm certain i dont have a virus doing this.. but do you happened to know why it's causing this? Also how can i fix it?
BTW.. IT IS A CODE 52 i don't know what that means..
PLEASE AND THANKS YOU GUYS~ <3

All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.

Little problems with two sensors

Hi
I've got a problem with two sensors.
First, the luminosity sensor. I'd like to set the brightness to a fixed value. It would not vary from darkness to bright sunlight.
Then, when i'm typing in landscape mode, it often switches back to portrait mode, wich make me terribly angry as i lose too much time.
How can i solve these two problems ?
Is there a special app?
Last, but least, does anyone know if an app that would allow to take HDR/exposure blending pictures exist ? It'd take 3 to 5 photos with different exposures, and if it merged them to a good tonemapped picture it would be perfect.
Thanks

The light sensor can't be set to a fixed permanent value using the phones default settings, I'm afraid. You can only adjust it's sensitivity. However, some users have reported using an app to keep the screen set at maximum brightness.
The motion sensor which switches the phone screen orientation has become more sensitive after the recent PR 1.1 update, so not a lot can be done about that either, apart from trying to hold the phone as steady as possible when using it.
Finally, there isn't any HDR available for the N8 at this time, nor is there any setting to increase the exposure time to something like a second, which would be a nice feature to add to a great camera.
All the best.
Ray

TS1363 I Have Problem With My Apple Mobile Device Driver It says "This device cannot start. (Code 10)" What to do?

When I plug My device To Pc(Windows Xp) It says Problem With Your Apple Mobile Device Drive ,I cheak in Device manger Its shows "This device cannot start. (Code 10)" Help pls..

All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner?

Problems with wireless usb adapter on MSI K8NGM-V

Hi!
I have a 3Com (3crusb20075) wireless usb adapter, and a MSI K8NGM-V Mainboard. Very often the usb disconnects from the network and i have to reinsert it to work again. A friend of mine have the exact same adapter and that one fails too. He uses mine without problems. I therefore belive that this is a problem with the usb ports on my mainboard. Have anyone heard of anything like this? I wanted to try to update my bios but i don't have a floppy so msi live update wouldnt let me, and i could find the bios files on the msi webpage so i cant burn them on a bootable cd. Help please
(I trying turning of power save mode on the usb adapter, without any luck. Tested it in linux. Same result)
Alex

The ability to access the network, but not the Internet, typically indicates that the computer is not able to either find or negotiate with the DNS servers. The proper DNS servers would be provided by your ISP using DHCP. In turn, the AirPort would use DHCP to provide these to both the wired & wireless computers connected to it.
Please try the following:
For each PC that is unable to access the Internet, temporarily include the following OpenDNS servers:
o Primary: 208.67.222.222
o Secondary: 208.67.220.220
You would enter these in the network TCP/IP settings for the respective PC's wireless network adapters. You may need to restart the computer in order for these DNS settings to "stick." After restarting, can you access the Internet with either or both of them?

Problem with two USB-gaming devices

Similar Messages

Maybe you are looking for