Problem with uc-locale-en_GB-8.6.2.1-12.cop selection on unity connection cluster

Hi All,
Hopefully someone can help me out. I'm trying to install uc-locale-en_GB-8.6.2.1-12.cop on our unity connection cluster which is running 8.6.2.20000-2. The cop files successfully installs and I've rebooted the both servers but I cannot select the language anywhere in unity connection administration.
I suspect this is because I'm running 8.6(2a) from the cisco site and not Unity Connection 8.6(2) Engineering Special 12 as per the release notes for Unity Connection 8.6(2a). Are Cisco likely to release language packs for version 8.6(2a)? Otherwise I guess I'm going to have to try and raise a TAC call and get access to the engineering special so I can gain the british langauge back again.
For reference :-
admin:show version active
Active Master Version: 8.6.2.20000-2
Active Version Installed Software Options:
uc-locale-en_GB-8.6.2.1-12.cop
ciscocm.refresh_upgrade_v1.1.cop
cm-locale-en_GB-8.6.2.1000-1.cop
Thanks,
Mike

Hi Mike,
I'm not sure about the versioning, but am curious if you followed these steps;
To Install Connection 8.x Language Files from a Disc
Step 1 Stop the Connection Conversation Manager and Connection Mixer services:
a. Start Cisco Unity Connection Serviceability.
b. From the Tools menu, select Service Management.
c. Under Critical Services, in the Connection Conversation Manager row, select Stop.
d. Wait for the service to stop.
e. Also under Critical Services, in the Connection Mixer row, select Stop.
f. Wait for the service to stop.
Step 2 Insert the Languages disc in the disc drive.
Step 3 Sign in to Cisco Unified Operating System Administration.
Step 4 From the Software Upgrades menu, select Install/Upgrade. The Software Installation/Upgrade window appears.
Step 5 In the Source list, select DVD/CD.
Step 6 In the Directory field, enter the path to the folder that contains the language file on the CD or DVD.
If the language file is in the root folder or if you created an ISO image DVD, enter a slash (/) in the Directory field.
Step 7 To continue the language installation process, select Next.
Step 8 Select the language that you want to install, and select Next.
Step 9 Monitor the progress of the download.
Step 10 If you want to install another language: Select Install Another, and repeat Step 4 through Step 9.
If you are finished installing languages: Restart services:
a. Start Cisco Unity Connection Serviceability.
b. From the Tools menu, select Service Management.
c. Under Critical Services, in the Connection Conversation Manager row, select Start.
d. Wait for the service to start.
e. Also under Critical Services, in the Connection Mixer row, select Start.
f. Wait for the service to start.
g. If you installed Japanese: Run the CLI command utils service restart Cisco Tomcat to restart the Tomcat service.
Note Make sure that the multilingual .cop files are installed on the exact specific CUC build that they were created for. Applying incorrect .cop files for your specific version results in an unexpected behavior of the user conversations.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrug027.html#wp1054157
Cheers!
Rob

Similar Messages

Problem with 'Edit Locally' command -- Due to IISProxy?

Hi,
We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is:
SAP EP 6.0 SP2 Patch 28 (Solaris)
IIS Proxy (Windows 2003)
The situation is:
If we access to SAP Portal using old url (directly to Solaris) using form-based authentication we do not have any problem with 'edit locally' command.
However, if we access to SAP Portal using IISProxy and Windows Authentication we get an 'Operation failed' error message.
     Java plug-in console shows the following message:
cargar: clase com/sapportals/wcm/app/docapplet/DocApplet.class no encontrada.
java.lang.ClassNotFoundException: com.sapportals.wcm.app.docapplet.DocApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Where is the problem? Is due to authentication method? SAP Portal or IISProxy configuration?
Thanks,

Thanks for your comment,
Now, we have tested with version 1.5.0_01 plugin version but the result is the same: 'Operation failed'
This is a very important topic to solve before installing Windows Authentication in a productive environment.
Has anybody any solution?
Damiá

Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

You haven't enabled VoLTE (Advanced calling) have you? Not that it makes a difference just curious.
Have you upgraded to Lollipop yet?
Could be hardware or SIM card issue, read through this thread:
I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

Problem with a local listener...

Hi there,
I have a problem with a backup system on Oracle using the Enterprise Manager.
The story is that, if I create a backup file on a computer that is not joined to any domain or has local users there is no problem to recover the backup. The problem begins when I try to do this process on a domain controler, even though that the local listener is working, the arrow is pointing down saying the listerner is unavailable, but still the other database that I use is able to comunicate to it. (I have only one listener on the server.
I have also two node Microsoft cluster environment installed on those two machines and Oracle files are stored on the SAN.
Thank you for any tips in advanced.

To get better help sooner, post a [SSCCE (Short, Self Contained, Compilable and Executable, Example Program)|http://mindprod.com/jgloss/sscce.html] that demonstrates the incorrect behaviour.
db

Problems with /usr/local/lib after installing

After I installed Leopard, I noticed that some of my files in usr/local/lib seemed to have disappeared. When I tried to open /usr/local/lib I got the following error: 'lib: Too many levels of symbolic links.' and it appeared that there was also a 'lib 1' directory in /usr/local which had all of my files in it. I managed to fix it using:
sudo rm -rf /usr/local/lib
sudo cp -R '/usr/local/lib 1' /usr/local/lib
Just wanted to give a heads up since this was rather annoying to figure out. Other than this I have very few issues with leopard, so far limited to:
-DivX playback doesn't appear to work
-after login it appears to take a while for finder to start
-a few problems mounting external devices, such as my USB drive and iPhone

I’ve found this on my system as well! I had some trouble installing MacFuse under Leopard. The installer just said "Das Installations konnte einige Dateien nicht nach '/' kopieren. Wenden Sie sich an den Hersteller", which basically means that it couldn't write to the root directory.
Then I found out about the /usr/local/lib symlink. This is very disturbing and clearly a major bug. I think it's a problem with the installation process of the developer tools. I’ve upgraded to Leopard two weeks ago. Everything worked. Then I’ve installed XCode 3.0 this and then the problem started. The circular symlink in /usr/local/lib has the timestamp of the XCode 3.0 installation…

I have just downloaded OSX Mavericks and am having a lot of problems with my iCloud account. I get a message "this iMac can't connect to iCloud because of a problem with (and then it quoted my e-mail address) Does anybody know what the problem could be??

As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
I do this and no matter what I seem to do this message continues to return.
Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
Many thanks
Mike

Hello John
Sorry I haven't got back to you sooner.
Thanks very much for your help, your solution solved my problem.
Thanks again and kind regards
Mike

Is anyone else experiencing problems with the thunderbolt port on their Mac Mini's regarding using it to connect a second monitor? I've got the Mini Display Port to DVI-D adapter along with a DVI-D cable and I can't get an image on the second monitor.

I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.

As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.

Problem with reading locale from moduleImpl

I extracted the locale bundle data from module by getViewObjects and I stored it into hashtable,
problem is that i allways get data from default locale and not from users locale settings.
These code is running on java servlet.
code:
NameModuleImpl NameModuleTmp = (NameModuleImpl)Configuration.createRootApplicationModule(propertie1,propertie2);
for(ViewObject vo:NameModuleTmp.getViewObjects()) {
int c=vo.getProperties().size();
Hashtable ht=vo.getProperties();
Greetings

hi Rok Kogovšek
Maybe some information in this forum thread could be relevant:
"ADF BC : using UI Locale to translate data (Steve M. example 95)"
ADF BC : using UI Locale to translate data (Steve M. example 95)
regards
Jan Vervecken

My IOS 8 was updated to 8.1 and it turns out that my internet is getting slower especially when i'm watching some movies and videos..I have no problem with my local internet.

I updated my IOS 8 to 8.1 and my net getting slower. Why is that?

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Problems with Swedish Locale

In iOS 4 the time format changed in the Swedish Locale from "09.43" to "09:43".
Was there a good reason for this or is it a bug?
The swedish way to separate hour from minute is with a period (.).

09-Jul-200712:35 PM
tordolsson wrote:
Yes, I've reloaded the voice commands
Hi tordolsson
1. Start Maps application.
2. Go to "Options > Extra services"
3. Select "Add navigation > Accept > Purchase > Select the correct region" (I.e. the region you have earlier purchased the navigation to).
4. You see a list of licenses with different lengths of time. You don't need to select the correct length, just go directly to "Options > Update".
5. Allow connection to license server to check purchase & license options by selecting "Yes" and by selecting proper Internet access point (if asked).
6. A note "xxx-day license activated" is shown where xxx is the amount of days left of your license.
Happy to have helped forum in a small way with a Support Ratio = 37.0

IPad enrollment problems with my local server

So,
recently I installed lion server onto an iMac to get mdm going at our business. I created a standalone server that only has local access. All the services are running, fine, and the open directory is also running okay. I set the dns to the following
static IP=192.168.1.87
DNS=192.168.1.87
Router=192.168.0.1
Subnet=255.255.0.0
Search Domain=server.connect-tech.local
I can go to https://server.connect-tech.local/mydevices on the iMac that is acting as my server, but when I try to enroll our iPads I can't get to that page to enroll our devices for mdm. Not sure what I'm missing? I thought it was something related to settings in our modem/router, becuase I don't have access to our company's modem/router settings. So, created a local network without any internet access, disabling all firewalls, and configuring it to function as a DHCP server. I setup a wifi network that the iPads and the server were connected to at the same time. But still, the iPads and iPhones won't get into the mydevices page.
Any ideas? I have a feeling its something simple that I'm missing. Let me know if you need more info. Thanks!

Don't you think it might be a good idea to find out what kind of IOException you're getting? At least display ioe.getMessage. showMessages will take an Object array instead of a single string so you can do:
JOptionPane.showMessageDialog(null, new Object[]{"Error in server", ioe.getMessage}, "Error",
JOptionPane.ERROR_MESSAGE);

Problems with seeing computers on the network map but they are not able to connect with each other

Hi All,
We have 6 HP pavillion Slimline s3620f PCS(Pentium Dual COre ED200) with 10/100 and wireless connections. They are running Windows Vista Home 64. We are also trying to connect a macbook, a laptop with vista 32, and a a mac with win xp running via bootcamp. We upgraded to the WRT160Nv2 for wireless access.
We have the cable modem connected to the router. The router is connected to a switch. On the network map, all connections are working/green(can access internet). Before this, in the vista network map each computer could connect to the other. NOw each computer can only connect to the router and one particular other computer. Each computer lists itself and that one particular other computer and the router. If I look at the full map, all are listed but they cannot connect to each other.
I hope this makes sense. Any suggestions?
L

Your computer firewall is not recongnizing your router.
Greetings from Northern Ontario, Canada

Problem with Mac OSX version of Microsoft RDP Client 8.0.10 (Build 25189) connecting to Linux host running XRDP

Hi,
I have an issue when using the Microsoft RDP client on Mac OSX 10.X when connecting to a Linux host running the XRDP service(XRDP host is authenticating to an AD DC).
Exactly the same connection parameters work when connecting to the XRDP host from a Windows server using the local Microsoft RDP Client and the same authentication credentials, so I am confused as to what might be creating the issue.
I have also checked that I am able to connect from my Mac to the remote linux box that is running the XRDP service, by using another App on OSX called CoRD. This also connects without issue.
Are there any differences in the way the Mac version of Microsoft RDP authenticates compared to its Windows counterpart?
Any advise appreciated. Happy to provide any logs.

Hi,
As this case has been quiet for a while.I need to close the case and will mark it as Answer. If you still have any issue,I suggest you ask in a new thread.
Thanks for your Support & understanding!
Regards.
Dharmesh Solanki
TechNet Community Support

Problem with uc-locale-en_GB-8.6.2.1-12.cop selection on unity connection cluster

Similar Messages

Maybe you are looking for