Problem with uninstalling Office 2013 SCCM 2012 R2

Hi, I am in a process of learning SCCM 2012 R2. Currently I am focused on application management so I started by deploying Office 2013 to test collection with only one member - direct rule membership by computer name. Deployment process finished without
any problems - I kicked off installation from Software Center on client machine. Having installed Office 2013 I tried to uninstall it but I got an error: Setup can't find or validate an installation file. Please try reinstalling . . . . In SCCM server I entered:
setup.exe /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
in uninstall program line. Uninstall.xml file is nothing special:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
I tried to uninstall Office 2013 from cmd line but I got the same error. I can manually uninstall Office 2013 by running setup.exe file and following wizard but that does not mean anything to me except it proves installation files are not corrupted. Office
2013 installation .iso file is downloaded from MS Volume Licensing Service Center.

In SCCM server I entered: setup.exe /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
in uninstall program line.
I've responded in your other thread:
https://social.technet.microsoft.com/Forums/en-US/fd735611-95bf-46f6-8add-2229a52e3e93/i-can-not-uninstall-office-2013-from-command-line?forum=officeitpro
Hi, your command-line is not valid - you are using a "relative" path for the <config.xml> and that is not supported..
http://technet.microsoft.com/en-us/library/cc178956(v=office.15).aspx#BKMK_config
Note: You must use a fully qualified path. Setup does not recognize relative paths with /config.
Instead, I suggest that you copy your "Uninstall.xml" file to the same folder where setup.exe exists, then, adjust your command-line like this:
setup /uninstall ProPlus /config Uninstall.xml
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Report Generation Toolkit Compatibility with Microsoft Office 2013 and LabVIEW 2012

Hello community,
on this page there is shown the Report Generation Toolkit Compatibility with Microsoft Office and LabVIEW.
In our company we use actually LabView 2012 and it works perfectly with MS Office 2010.
Has anyone ever tried the "Report Generation Toolkit" of LabVIEW 2012 with MS Office 2013? Does it really not work? Has anyone an emirical value for this topic?

Hi digital_badger,
as you sure have seen in the link it is not officially supported by NI, which means to you one of the following things:
1. You could upgrade your LabVIEW and your Report Gerneration Toolkit to Version 2014 and use MS Office 2013
2. You could just try it with MS Office 2013 which might work but if it's not working you don't get any support from NI.
Even if someone tried it already and it worked for him does not mean that it will work on your machines. It is possible that on some of your machines it could work but not on others. Their can be a lot of problems while playing around with unsupported setups.
3. You could leave your setup as it is and stick to your MS Office 2010.
I hope I could give you a good answer to your question

I can not uninstall Office 2013 from command line

Hi, I have been stuck for a while trying to uninstall Office 2013 via command line. Installation file was downloaded from Volume Licensing Service Center, Uninstall.xml file for silent uninstallation looks like this:
<Configuration Product=”ProPlus”>
<Display Level=”basic” CompletionNotice=”yes” SuppressModal=”yes” AcceptEula=”yes” />
</Configuration>
From command line the following will not work:
setup /uninstall ProPlus /config .\ProPlus.ww\Uninstall.xml
Error: Setup can not find or validate an installation file. Please try reinstalling Office . . .
setup /uninstall ProPlus gives me GUI to continue process - it seems /config .\ProPlus.ww\Uninstall.xml part does not work as it should be
This is very important to me since I used above command line in SCCM 2012 R2 to allow user to uninstall Office 2013 by itself via Software Center. When this failed I tried locally but the error was the same. This should have been trivial task - silent uninstallation
using .xml file. It is not a rocket science. I am very angry because losing time for something like this is unacceptable for system engineers working with SCCM 2012 R2.

Hi,
This error might occurs due to lots of reasons. Where is the installation file stored? If it's stored on a network share, please copy it to your local disk, and then manually run the command again. This way, we'll see if the installation file is the
problem.
If issue persists in this case, then this generally means that something wrong with the installation file. Please try to redownload it and then try again.
Please also make sure that you're executing the command with elevated privileges (run as administrator).
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How to Install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits

I am with problems to have acess to the link: http://www.microsoft.com/en-us/download/details.aspx?id=12187
Why?
I want do install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits. How can I do it?
Thanks.

Hello Carla Sofia,
Visual Studio installation do not depends on Microsoft Office 2013. They do not have relationship here. I think your problem is that you cannot find the link to install Visual Studio 2010.
In order to know why, please see here:
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?sort=PN&alpha=Visual%20Studio%202010&Filter=FilterNO
The mainstream support for Visual Studio 2010 is already expired and that is why you cannot open any link about Visual Studio 2010 Setup.(I cannot verify whether that link is about VS2010 Setup.)
I think you need to think about the following:
1. If you need Visual Studio 2010, you may have to consider some other channels. For example, official site you can try use MSDN Subscription. For non-official site. Sorry I cannot provide any place for you
2. You can use other latest version of Visual Studio, for example, we have Visual Studio 2012, 2013, 2015 for you to use. You can also use Visual Studio Express 2010 version. It is still available for download.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

There is a problem with the Office database - Office 2011

Good day!
I recently installed Office 2011 for Mac and i'm getting the following error message: There is a problem with the Office database. Excel comes up with the error message but i am able to get past the error and open the application, but it freezes when I try on Word. I have to force quit the application to close it completely.
I've searched online and tried all the suggestions - even those from the discussion board: Problem with Office Mac 2011 database. I've completely removed traces of the software : http://support2.microsoft.com/kb/2398768 and reinstalled using the disc, as well as followed suggestions to rebuild the database. I also installed the latest Office update: http://www.microsoft.com/en-us/download/details.aspx?id=44026 from Excel (As it was the only one I know of that's functioning after the error message) but to no avail.
Here are the tech specs:
OS X
version 10.9.5
Office 2011 for Mac
Version 14.4.4 (140807)
Update: 14.4.4
Hope you guys can point me to the right direction. Any suggestions are greatly appreciated.

Best ask question on one of the Microsoft boards.
Could try NeoOffice.
https://www.neooffice.org/neojava/en/index.php

Problems with Microsoft Office 2008 and 2011

Hiya,
I am running Mountain Lion on my Macbook Pro and I'm having ongoing problems with the Office system. I'm doing a PhD so I use footnotes all the time and in Word 2011, the autosave function makes the footnotes disappear from the bottom of the page, but I'm not comfortbale working wihtout autosave running. I deleted Office 2011 and put Office 2008 back on my machine. However, since I re-installed Office 2008, the whole OSX seems to have slowed down.
Could Office 2008 cause my whole system to get sluggish? Is there anything that I can do about it?
I am also wondering if there is there another solution to my original Office 2011 problem with footnotes that doesn;t involve disabling autosave? Has anyone else has similar problems with footnotes? I just wiped my whole system and re-installed all the programmes, so I am surprised to still be having these same problems with Office!
Thank you for any help and advice!

You should try asking your Office for Mac question in the Office for Mac forums where the Office for Mac gurus hang out.http://answers.microsoft.com/en-us/mac?auth=1

The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened ans i see always this information on my mac? what ca

The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened ans i see always this information on my mac? what can I do?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Doubt about Report Suite Office in SCCM 2012

Hi all,
I have a question about Suite Office in SCCM 2012.
Why in my report 07B - Computers that recently used a specified executable program
when I specific Office 2010 don't display nothing about Outlook?
Just display follows softwares: Word,Excel,PowerPoint,Visio and Project. Someone have idea?
Thanks.

Do you have Software Metering enabled for that executable?
Mike Leach | http://blogs.catapultsystems.com/mleach/default.aspx
Mike Thank's your opinion...my answer....Yes, I do.My software metering is OK.
My doubt is why Microsoft Outlook don't display as being part suite Office?
Is necessary I select Microsoft Outlook (separately) for do my software metering but I think this is not correct, because the correct is suite Office contains: Word,Excel,Visio,Project,Powerpoint
and Outlook...
So when I selected Microsoft Office 2010 display all softwares as I saw in my first post and any about Outlook.
Thanks any suggestions.

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

Got this error 0x4004f00c with MS OFFICE 2013

HI,
I have downloaded MS OFFICE 2013 with the help of my school which inc the SN
I did it in August, yesterday , when I open ms word, I got this message, need to activate this office, 3 days left .....
I notice underneath thee is this error : got this error 0x4004f00c with MS OFFICE 2013
Thanks

Please repost your inquiry in the more appropriate
Microsoft Office Community Forum. Thanks!
Carey Frisch

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

I have a problem when installing Office 2013

Dear Microsoft support team!
I have a problem when installing Office 2013 as follows:
"A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. when setup microsoft office 2013"
I don't know why it is so. Pls help me!
Thanks and best regards!

Have your tried to perform the common troubleshooting steps for installing Office 2013 as the following article?
http://support.microsoft.com/kb/2822317/en-us
If not, please try it first. Feel free to post back. Thanks.
Tony Chen
TechNet Community Support

Snow Leopard Problems with Microsoft Office 2004

I installed Snow Leopard about two months ago. Ever since I have nad problems opening Microsoft Worrd 2004. Every time I try to open Word it hangs up at "Optimizing font menu performance..." Before I installed Snow Leopard I had no problems with any Office 2004 applications. I also have a lot of problems with fonts when I open Safari.

This message occurs whenever your installed fonts change. I work for a publisher so was getting it all the time as I turned fonts on and off for different projects.
In Office 2004, do this:
1. Go to */Applications/Microsoft Office 2004/Office/Support Files/*
2. Rename or move FontCacheTool. (Requires administrator access)
In Office 2011, do this:
1. Go to *~/Library/Preferences/Microsoft/Office 2011/*
2. Delete *Office Font Cache*
3. From Terminal, type touch" then drag in the Office 2011 folder
4. Back in the Finder, do Get Info on the new, empty *Office Font Cache* file. Make it read only and lock it.
Notes:
1. WYSIWYG menus will now just show the font name in standard font.
2. You may be able to disable the 'optimising' message more easily by going to Word's preferences and turning off the 'WYSIWYG font and style menus' tick box in the General section. This takes affect in all Office applications but doesn't seem as reliable at preventing the caching problem.
4. Newly added fonts should still appear when you next start an Office application.
3. However you have Office set up, it can't see certain fonts. They are the ones logged to Console, e.g.:
12/04/2011 09:58:14 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd[21782] ATS Font family could not be created for Abaton ITC Std - Legacy Applications may not see this font

Problems with Microsoft Office

I really don't know where to post this as I can't find a Discussion forum for it, please re direct me if this is....
So I'm having a HUGE problem with Microsoft Office. I've had the Student addition, purchased it in a store, and have been using it since without any issues. Just yesterday, it told me I needed to download an update for it in the System Update. Well it downloaded without a problem, however during the installation it stalled and never completed. When I turned my computer back on, and did the System Update again, it said that my system was completely up to date. However, now the only too things in my Microsoft Office folder is PowerPoint and Excel. The other applications can not be located anywhere on my computer.
Now is there a way for me to fix this. I no longer have the CD with Microsoft Office on it because I'm constantly traveling. I'm extremely annoyed because I rely on Entourage for my emails, don't really like the Mail application. I just want to know what to do. Any suggestions?
Thank you.

When an installer 'stalls' during the installation, I'd guess you'd need to try reinstalling from the CD. I could be wrong though. Here is another forum that may help you if you don't get the answer here...
http://www.macfixitforums.com/php/postlist.php?Board=OfficeX

Does Essbase Excel Plugin 11 work fine with Microsoft Office 2013

Hi,
My Company is planning to Upgrade to Microsoft Office 2013. Does Essbase Excel Plugin 11 work fine with Microsoft Office 2013?
Thanks,
Shashi

Hi Shashi,
Below content is taken from oracle certification matrix.Microsoft office 2010,2008 supports the lastest version of 11.1.2.3.More info check with the oracle certification matrix.
Version Supported
Vendor
Certification Type
Version
Exceptions and Additional Information
11.1.2.3
Microsoft
Office Productivity Suite
Office 2007 (all SP levels included)
Office 2010 (all SP levels included)
1. MICROSOFT OFFICE IS REQUIRED FOR: Smart View and Offline Planning when used with Reporting and Analysis, Financial Management, and Planning. Microsoft Office is also required for Disclosure Management, FDM, Financial Reporting Client, Performance Management Architect File Generator, and Strategic Finance.
2. Offline Planning and Excel must be installed on the same machine.
3. Microsoft Office 2010 (32-bit Office on 32 or 64-bit operating systems, 64-bit Office on 64-bit operating systems)
4. EXCEPTION: Disclosure Management has installation prerequisites. For Office 2007. See http://support.microsoft.com/kb/970942.
5. EXCEPTION: FDM server only supports the 32 bit version of Office.

Problem with uninstalling Office 2013 SCCM 2012 R2

Similar Messages

Maybe you are looking for