Problem with "unite" option in illustrator

Hello,
I have problem with new Illustrator. I get distorted shapes after using "unite" in pathfinder or when rescaling, often shapes get distorted when expanding strokes to shapes, what is going on? I use illustrator for quite some time and never had anything like this. Screenshots attached.
Also I need to updade software through CC app each time I turn computer on, update seems not to register somehow.
Please Help
Kamil

Kamil,
In cases like this, the first guess is Align to Pixel Grid
You may select everything and then untick Align to Pixel Grid in the Transform pallete, and also untick Align New Objects to Pixel Grid in the flyout options.
You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

Similar Messages

Problem with unit in Query

Hallo Experts,
We encounter a problem with unit in our Query.
Szenario:
We use the Unit like PC, SET in Query.
In Table T006 those Units have value 0 in the field ANDEC, so they will be rounded up and rounded down in Query.
Our Problem is some Queries need the rounding up and down but others don't need this function.
Where and how should we change to solve the problem.
thanks & Best regards

hi,
if you want to control the rounding off while unit conversion you can do it from SPRO
In the BW system, goto SPRO -> SAP NetWeaver -> General Settings -> Check Units of Measurement -> Units of Measurement -> Choose the unit corresponding to 'KM' -> Click on 'Details' button in the toolbar.
Look the field 'Decimal Pl rounding'. Change this to 3 or whatever value you choose and see if it works.
in above link i have taken example of KM, you need need to select the required unit.
let us know if this is solves your problem. I am not sure if this can be done for individual queries but this is controlled by UOM wise as mentioned above.
Regards,
Rk.

Problem with Unit of measurement

Hi,
I am having problem with Unit of measurement with different languages.
Eg:
In SPRO, I am able to see the unit of measure T3 Description: (Trading unit). in SAP 200 client .the logon language is EN(english).
But if I logon into same client(200) with different language DE(german) version, I am not able to see the description in German, the description field is blank.
Kindly give me a solution for this problem as it is very urgent.
Thanks in advance.
Regards,
Shankar

Hi Aishwarya,
I can think of 2 possibilities:
1. You need to verify passing the Target UoM with the ISO Code as well as the update flag in the 'X' structures.
2. The material that you are trying to pass some UoM does not have the conversion maintained in the Material Master. (Base UoM --> Target UoM conversion in Material Master, contact Functional Consultant).
Also, if you can verify by performing the action manually and check if the Sales Order is getting created manually with the Target UoM .
Regards,
Pranav.

I would like to ONLY buy Lightroom, but it seems like there is some problems with this option. Or is it not an option anymore? (I already have photoshop installed)

I would like to ONLY buy Lightroom, but it seems like there is some problems with this option. Or is it not an option anymore? (I already have photoshop installed)

Photo editor app | Download free Adobe Photoshop Lightroom 5 trial
At the above link go down to the bottom of the page right hand side. There is a button to purchase the Lightroom Perpetual License.

Problems with PNG colors in illustrator

I'm beyond frustrated with illustrator's png export at this point, contacted adobe customer service 3-4 times with no answer, already made a post about this with no solution, here is the problem; everytime I export from illustrator as a png the color changes. It doesn't matter if I am working in RGB or cmyk, the color will always change, typically the colors just look faded/ less saturated. There is no way for me to match the color of an exported jpeg to an exported png. This is a problem because when I give my clients their logo in png I need to import it into photoshop or preview to change the color coding so that it matches the previous jpegs I would sent them, now while working with packaging (cmyk document) the png export looks pretty faded, but it prints fine. Is this typical? My in illustrator colors look fine and are the same as my jpeg exports, the only thing that has a different color look is png exports, no matter if I choose embed color profile (save for web), assign profile, bascially any color choosing option in illustrator. I'm wondering what does everyone else do when their client wants the logo in a png? Do you just work around this with assigning a profile in a program other than illustrator?

I am afraid that the workaround is all you can do at the moment; open the png file in Photoshop and assign sRGB profile (you can set the Ask when Opening for missing profiles in the Photoshop color settings).
There is no way to embed a color profile in a .png file in Illustrator (like you can in Photoshop's Save for Web dialog)
But that looks like a good feature request:
Adobe - Feature Request/Bug Report Form

Problems with RGB colors in Illustrator

Hello,
i have a problem with saving my artwork which is done in illustrator in PDF file. This artwork needs to be saved in PDF in RGB colors. It seams that I cannot do this. Originaly artwork was done in CMYK. Option Edit/Edit Colors/conver to RBG is not working that is this option is not possible.
Any suggestions please. Printing company cannot process it if PDF is not in RGB colors.
Thank you in advance.

But there is no difference in either case as the file will not be overwritten.
True that the file will not be overwritten if you're careful not to do a regular save, but there is a difference.
When you switch from CMYK to RGB document mode in Illustrator, AI simply converts to whatever you've set as your RGB working space. Yes, of course, you can go into Color Settings and change your workspace profile if need be, but now you're monkeying with settings that you might not want to be changing frequently.
Why not, instead, take advantage of a feature that's there specifically to deal with workflow issues like this?
If the printer requires a specific RGB space that's different from your normal working space, it's much easier to select it from the destination color dropdown during PDF creation. If you'll be creating more files for this particular printer, simply record a custom PDF (job options) preset.
Even if one chooses to do it the Wade Zimmerman way, one should make sure to look at the color panel during PDF creation to make sure no unwanted space conversions are taking place.

Problem with unit converter widget

I am having a weird problem with my unit converter widget on 10.4.9.
I re-installed my system, and now when I go to open the unit converter widget, I can no longer see the British pound currency, there are all these othere European currencies.
Is there anyway to get the British pound currency back, do I need to re-install the widget, and how do I do that.

Then I'd try removing & reinstalling it...
http://docs.info.apple.com/article.html?artnum=301629
If it's one that came with OSX, you may have to get pacifist to extract it from your install Disk.

Problems with using Option key when starting up

I have 3 internal drives using a PCI card (2 slots) that allows me to use large drives with more capacity than stock allowance on my G4 Quicksilver 867 mhz 1.5 GB RAM tower.
All drives are Seagate Baracudas ATA: 2-400GBs and 1-200GB. I bought the 400s at the same time.
My main drive has OSX 10.4.11 (#1), and it is backed up to Baracuda #2 (400GB) which is a slave to my Main drive (using SuperDuper All files for a mirror bootable copy). The 3rd drive has Leopard 10.5.1 for learning and trying Leopard.
On the second PCI slot is the smaller 200GB Baracuda.
After backing up using SuperDuper (Main to #2) as a mirror, I see #2 in the Apple > Prefs > Start Up Disk.
After the first backup I can see all 3 drives when using Option key at startup, but instead of seeing the names of each drive under the normal hard disk icons, #2 has a SCSI icon underneath the hard drive icon, it's name (Mac BU) is missing and I can't start up to it. The other #1 and #3 looked as expected. I chose #1, it launched, fine.
On second backup, #2 is still in Prefs > Start up Disk panel, but this time doesn't show up on when using the Option key at start up. I have replicated this, but erasing #2, rebacking up twice.
With only the #1 and #3 drives showing at start up with Option key and #1 selected in the Start up Disk panel, I chose #3 (Leopard) in the Option window view, and my G4 froze at the gray apple screen. I hard shut downed, powered up and the G4 defaulted to Main (10.4.11)
I selected #3 Leopard in Prefs > Start Up Disk, restarted OK.
I restarted with the Option key (only #1 and #3 show) and now my main drive didn't have it's name only the SCSI icon under the normal hard disk icon like #3 was doing. UGH!
Nervously, I chose #3 with Leopard and the G4 started up to it OK.
I then reselected my Main #1 drive in the Start Up Disk panel, restarted to #1 OK.
OK, problems summary:
1) I can't use SuperDuper to create a blessed bootable #2 drive at Option start up, but I mention this for more info about a possible problem at Option startup, more than I want comment on SuperDuper potential bug / conflict.
2) I didn't try choosing #3 in the Start Up Disk panel, as I was affraid the G4 would freeze and then I might not be able to select either of the other #1 or #3 at Option start up as something is wrong with using Option key start up, and #3 would have been selected in Start Up Panel, which I was afraid I might not be able to get to again.
2) When I start up either of #1 or #3, I get momentary black screens after the gray apple screen at Option key start up and then again after the apple progress bar. This doesn't happen when I start up directly either drive when the drives are selected using the Start Up Disk panel
When using the Option startup, I am experiencing the above problems.
Whew, I know, but does anyone have any input and fixes?
Thanks, in advance,
Steven

Hi Dave.
Well... good news / bad news
Turns out, I have an Acard 6280M and have 3 drives connected to it as mentioned (#1 & 2 are mirrored using SuperDuper with 10.5.1, #3 is a clean install off a new Apple OSX disk 10.5, then updated to 10.5.1)
I also have a Firewire external drive, that I used SuperDuper to make it a mirror of #1, using the same procedure backing up #1 to #2, to test SuperDuper.
The firmware update directions tells you to start up off a drive not on the PCI card, I used #4.
While running off #1, I selected #4 in the Start Up disk pref and it booted OK! This seems to rule out SuperDuper being the problem - of creating a mirror from #1 to #2 (both on the Acard) and then not seeing #2 in the Option key boot screen.
I applied the firmware, which directs you to first update the Acard driver to 2.06, which is included in the folder with the firmware updater.
I did this and then applied the firmware updater.
I then applied the driver upgrade to drives #1 and #2 (10.4.11) while running off #4. I did not apply the driver update to #3 (10.5.1) and restarted, using Option key.
All 4 drives appeared successfully on screen as expected with their names!
Then I selected each drive one by one:
#1 = kernal panic. Hard shut down, used Option key again
#2 = kernal panic, same as #1
#3 = froze at gray Apple screen - no spinning gear. Hard shut down.
Tthankfully, left Start Up disk pref to be #4 external and on restart, let the system boot off without going to the Option screen. #4 booted OK. Whew...
So all 3 drives on the Acard, won't boot. I was concerned it was the 2.06 driver, but since it wasn't applied to #3 Leopard drive, I'm assuming the firmware is the issue and perhaps not compatible with 10.4.11 or 10.5.1?
Two things I've not tried:
1) With #4 selected in Sys Prefs, then using Option key and selecting #4 there too to see if using the Option key selector is a problem too.
2) Selecting any of #1, #2, or #3 drives in Sys Prefs and restarting without Option key selector.
My fear is that if my last working drive #4 isn't the default drive set in Sys Prefs, if Acard isn't the problem alone and there is also a problem selecting any drive using the Option key - even #4, then if #4 isn't the default and all 3 Acard drives panic on regular boot (non-Option key) and I have to hard restart, will keep defaulting to whatever drive I set in the Sys Prefs and not be able to get back to #4.
Should I just go to my local computer store and see if they have a newer model PCI card and trash my existing one as I may have ruined it with the firmware updater?
Thoughts?

Pixelated Problem with 3D Mapping in Illustrator.

So here's the situation as best as I can recount it. I created a 3-d revolved bottle and lid in Illustrator, back in probably CS2. Since then, I have been unable to get the bottle, or it's mapped image to appear anything but pixelated and nasty. Which makes it pretty useless, really. Recent 3-d revolves with mapping seem crisp. Is this original file just unusable and broken in some way? I have tried re-mapping the imagery and re-creating the symbol used for mapping and have not produced any different a result. My only other thought is to get a real bottle, print the label for real somewhere and take a photograph if I can't get this to work. ;) So, is this a new problem, or a problem from an earlier file? Has anyone else had this issue? I'm using CS3 now on a Mac G5. The file opens in CS3 fine, although I did have to re-map the image map symbol for some reason.. it seemed to think it was on the back or inside of the bottle when I opened the original file.
I know this is pretty vague, but I really don't have much experience with 3D mapping in illustrator.

Ok, I believe that fixed the mapped art's resolution issues. But one other question, the 3-d bottle that the artwork is mapped to, has a rough edge to it that is still pixelated. I can take it into photoshop and clip out that 'edge' if need be, but I'm still wondering if there is a setting I'm missing here. Thanks again for all your help!

Problem with width tool in illustrator cc

hello!
i used to use illustrator cs5 and had no problems with the width tool. now that i am using adobe CC, the width tool functions very oddly and the cursor points are bizarre. for example, i use to just hover over the exact width point and could easily access handlebars or move it. however, in CC, i have to hover a little further away in order to get the ~ symbol to show. PLEASE HELP. this is driving me bonkers and the rate at which i'm working is quite delayed. THANK YOU!!!

Without proper system info and other details nobody can tell you anything.
Mylenium

Problems with updating muse and illustrator

Everytime I try and update muse it says the installer is damaged - have tried everything, restarts, waiting a few days etc.
Then wne I tried updating illustrator I got this:
Adobe Illustrator CS6 Update (version 16.2.1)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D204

seems to be working with illustrator however still have a problem with muse..
says
the application coudl not be installed because the installer file is damaged. Try obtaining a new installer file from the application author

Serious problem with encrypting options of Symbian...

Hello to all
Yesterday I've got a serious problem with the encrypting options of my Nokia C7 with Symbian Belle.
After encrypting all memories (300MB C: internal memory, 8GB D: mass memory and 8GB microSDHC memory card) I saw that even for the user all files were unreadable (even the name of the file).
It's not like the old password system for memory card present until Symbian Anna (that made the memory card inaccessible only for other phones and pc).
So I decrypt them, wanting to turn back the situation. The 300MB C: internal memory was correctly decrypted, same as the 8GB E: microSDHC external memory card.
But the internal 8GB D: mass memory was decrypted and wiped out. Or, for better explanation, it was formatted.
FORTUNATELY I'm obsessed with data security so the internal mass memory contains only the maps and some video copied inside the memory (I don't remember well but I think that was all).
But I think that is a serious problem. I sincerely don't want to retry again for checking if this was only a case or a recurrent bug...

Hi baboo85,
Welcome to the Nokia forum.
Thank you for your feedback and good to hear haven't lost any crucial data.
All posts on this forum are read by us as moderators as well as our software developers and will be looked at when software updates are being created.
Please continue to post valuable feedback!
Regards,
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Problem with large option class during runtime 11.5.10

It seems like our Oracle Configurator has a problem with loading multiple large option classes with about 10,000 items under it. We are running 11.5.10. My guess is that Oracle has to load everything in the option class and at some point the server just gives up after loading so much data.
Basically the model looks like this and was set up by Oracle themselves in 04. Overtime the option classes grew.
--Base model
----Model A instance 1
--------option class
------------10000 items
----Model A instance 2
--------option class
------------10000 items
----Model A instance 50
--------option class
------------10000 items
Is there an optimal amount for an option class? Is the model structure possibly outdated and we should break up the option classes into models to alleviate some of the pain? Or are we at the limitation that Oracle Configurator can do and should peruse a custom solution?

Funny thing really because the Case study for Chapter 4 is from our company that Oracle put together for us and its not working in the sense that it seems the servers can't handle the current model structure. I wouldn't blame the UI for these crashes and we already hide stuff from the user (ie, having to sort through all 10,000 items and hiding the BOM structure). Quick story of why i want to try and fix it is becuase the way its set up now in the model document is that 3 people could kill the server by basically saying "ok i selected this item for this location" (which would load the 10,000 items into memory on the server and not to the UI upon selection of the model) and then they would say... "ok now copy this selection to all these 50 places" (which would load those items again for each place that the item had to copied to) and BOOM server dead. I think sandeeps diagram of the changes is a really good idea and could help out alot and I tossed out that idea a few times before around my work place to help with the server issues. I feel that it would work but is it also possible that maybe configurator can't support our model the way they are wanting it to work?

Problem with select option in module pool

Hello friends,
I have successfully created a select option in my module using sub-screen. My problem is the EXTENSION buttom in the select option. When i click on the EXTENSION button a proper pop-up appears but when i input some values or cancel this pop-up then the program gives the following dump.
Error
The attribute screen type with the values 'Normal Screen' and
'Subscreen' determines the use of the screen. If a normal screen is used
as subscreen or vice versa, an error occurs.
The screen "ZRPMSEA" 0002 has, in this respect, an inappropriate screen type.
Kindly Help

HI,
Go to the Screen Attributes and select the appropriate Radio Button
1) Normal Screen " Whichever is required (in Which type of Screen you Want)
2) Subscreen " Check for the Correct type and Check the Radio Button Accordingly
3) Modal Scree
Cheerz
Ram

Problems with Paypal option- iTunes Crashes!

I originally experienced similar problem as others with activating paypal, getting a confim #, and then nothing. I was using Mozilla.
Then I got a new computer, new versin of iTunes 5.0.1 and whenever I clicked on the link below the Paypal option to activate paypal account iTunes just crashes completely! This happens regardless of browser IE, or Mozilla. Anybody heard of this? Any ideas?

I hope iTMS gets you answer! And I meant to say iTunes Music Card, not gift certificate.
Others have signed up without CCs:
Do I have to enter a credit card number to use an iTunes Music Card?
A credit card is not required to purchase music using an iTunes Music Card. Learn more in this article.
http://docs.info.apple.com/article.html?artnum=301958
Scroll down, the part at the end says after you enter the music store card info,
In the resulting screen, create your new Music Store account. You will have the option to enter credit card information; if you do not wish to do so, click the None button on the Payment screen.

Problem with "unite" option in illustrator

Similar Messages

Maybe you are looking for