Problem with unlocking and locking the Materials in MARA using idocs.
We are sending a inbound idoc from one cluster to the other to update the materials
If the material is locked ( MARA-MATFI=x ) before it needs to be unlock it ,update it and lock again .
If its not locked ,we just need to update it and lock the material .
When we are trying to implement this the materials are not getting locked at all times .
the update inbound idoc is being sent to 5 clusters at a time .
The same material is getting locked in some clusters and some it is not . (But the data is being updated in all the clusters )
Can you please suggest me a solution or give me an idea where the problem would be lying.
The client has a Keystone Server where alll the Master data is kept and there are 5 Production Servers .
When ever there are any updates to the Materials they are first updated in the Keystone server .
And with the help of a Batch Job they send inbound idocs to the 5 Production Servers.
On the Production servers if the material in MARA that needs to be updated is locked ,it needs to be unlocked updated and locked again .
Hope i have given u the clear idea of the scenario
Similar Messages
-
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
Trouble with unlocking and locking a 3rd gen iPod touch
When I lock or unlock my iPod it will either re unlock itself or relock itself so if I was to lock my iPod right now it would unlock and be at my lock screen and if I press the button again it will lock and relock right away again I have to do this about 3 times before it will lock for once I did everything that the site said and nothing helped
Saying you tried everthing since it does not tell us what yu did try.
Have your restored the iPod to factory defaults/new iPod?
Is so and still have a problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Problem with checkbox and run the get button event continuously
Hi all,
I have a checkbox list of 3 sensors. I have used the X-Control (for checkbox) found in the following link for my application https://decibel.ni.com/content/docs/DOC-30558. I have problems to achieve the following.
Suppose i check Vibration and Strain, I should be able to display both Vibration and Strain data. (I should compare each element of 1d array with the string constant and run the case structure).
I have to run the GET event continuously to display the data.
I have attached the code to the post.
Please can anyone suggest how to go about this.
thanks in advance
Regards,
KM
Attachments:
Main page Enhancements for Create and Load.vi 69 KBHi Bob_Schor,
I tried using the approach you mentioned. I cant run continuously. I am not able to figure out where i am going wrong. I have attached the updated vi.
Hi Hooovahh,
The link you have posted seem to work with LV2013. I am currently using LV 2011. Can you please update it to 2011. Is OpenG necessary for this?
Regards,
KM
Attachments:
Main page Enhancements for Create and Load.vi 77 KB -
Hello,
I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
When I type the "@" key, I get "<"
When I type the "<" button, I get "@"
I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
Someone of you has he encountered the same problem?
Thank you.The language of my Keyboard is French
-
MOVED: MSI CX623 - Problem with RAM and setting the primary board
This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=167930.0You should try a different mem slot. Say for example 0 and 2. There have been issues with DDR slots and all different types of mobos. Like I have a Shuttle Ak31v3 mobo with 2x256DDR2100 Kingston and the chips will only work on slots 2-4 and 1-3. It will not boot if I tried any other combination. It's a pain in the ass but thats just how it is. I had this same problem with a Asus A7V266.
I don't however have that problem on my Kt3 ultra 2 R mobo.
Madd -
Problem with Itunes and Remote when external DAC is used
I am using IPad Remote app to connect to itunes library paired a windows vista Toshiba Laptop.
When the pc speaks are used or the iPad for audio reproduction, everything works OK, and iPad Remote can connect to iTunes Library.
Unfortunately when the optical audio output of the PC is used for audio reproduction through an external DAC, amplifier and speakers, iPad cannot connect to iTunes library!
Thanks in advance.Perhaps Tom could assist.
-
Problem with opening and closing the lid
when i am trying to open or close the notebook lid..there is sound of crack, there is no any physical damage happened in past with my notebook....
Hello Paresh9023
Welcome to the HP Forums!
I understand there is a sound coming from your notebook when you close it. Whenever something like this occurs, you should contact HP support immediately for assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks!
Mario
I worked on behalf of HP. -
Problems with eax and "enter the matr
hi folks!
My System:
3,2 ghz P4
G Ram
Gforce FX 5900XT
SB Audigy 2 ZS Pro (all Updates)
Windows XP SP 2
I can't enable EAX in the game enter the matrix, any has the same porblem or a solution?i've solved the problem 4 my own.. =)
4 all who have the same problem: just install the latest patch... www.atari.com
cu -
so i had a full battery on my iphone and it just shut off and now it will not turn on it has no water damage nothing
Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).
-
Problem with my (And maybe all?) Y50 4K using an external monitor
Specs:16Gbs of RAM512GB SSD860M 4GBi7-4710HQ/etc/ Anyhow, I finally hooked this sucker up to my monitor (Via HDMI) and was having serious performance issues in games, and other things that would be gpu/cpu worthy. I've finally found part of the culprit, which is that when the laptop screen is closed, I get bad performance, when it is open, everything is working as intended. Basically I go from this (Open lid): https://i.imgur.com/AJujwly.jpgTo this (Closed lid): https://i.imgur.com/w9uAGlN.jpg (Usually runs even slower) I suspected that the computer may be ignoring my whitelist for BF4 (For the use of discreet graphics) upon closing the laptop and switching to integrated, however, I do not believe that's the case. Lid closed while discreet graphics is forced: 15 - 25 FPSLid open while integrated graphics is forced: 5 - 7 FPS So it appears the computer just has a weird bottleneck on the GPU/CPU whenever the lid to the laptop is closed. I have: 1. Looked through my bios2. Made sure high power settings stayed when the lid was closed/while plugged in or on battery.3. Made the computer stay awake when the lid is closed (Duh, don't know why people keep recommending this :L )4. Whitelisted the program via Nvidia's control panel to use Discreet graphics5. Tried using external monitor as extended display, and all other possible forms. All to no-avail. Anyone with a Lenovo Y50, or Lenovo Y50-4K want to confirm this issue is not just with myself? Thanks!
I am not Y50 user but I believe it is not bizzare at all. When you think of New Approach Thermal Design™ the producer is introducing in their recent models (link, link - look at the Temperature section) I can bet lot of heat dissipate up through the keyboard. Closing the lid you actually stop (or severely reduce) that heat dissipation This can cause throttling issue.
-
Severe problem with installing and starting Audio-DVD Pla
Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PMHi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM -
I have problem with connect me to the internet
Hi, I have my apple TV and always I had problem to connect me to the internet I don't know why because I have my Mac, and Iphone that don't have any problem with internet and is the same server.
Ccan you elaborate on the issue?
-
Problem while extending and modifying the ISA B2B app on SAP J2EE 6.4
We are facing some problem with extending and modifying the ISA B2B 4.0 application.
First Let me clarify you the whole scenario.
Previously we had ISA B2B 4.0 SP03 deployed on SAP J2EE 6.20 Engine.
We had used eclipse 3.0 to extend and modify the application as NWDS does not support SAP J2EE 6.20.
We had used ant buildtool to build the modified application which comes along with the ISA Software Archive.
We had successfully done all the modifications and application was running fine...
Now we have upgraded the overall J2EE infrastructure and using J2EE 6.4 Engine which supports NWDS.
We have successfully deployed the ISA B2B application which comes along with the Support Package.
We are using Support Package ISAWAC40SP11P_7-20000529.SAR E-Selling 640. The application is working fine after all
the configuration done in XCM and SAP CRM 4.0 system.
Now for modification and extension i have created another b2b enterprise archive with name "b2b_client.ear" using ant buildtool.
I've done the modification and extension .. added some Z classes and JSP pages. Now when i try to deploy the application using
SDM 6.40, I got an error message stating
<b>"com.sap.sdm.util.sduread.IllFormattedSduFileException: The archive must be deployed with a 6.20 SDM, which has a SDM-SDA compatible version 1 or greater."</b>
I think this error is due to the incompatible sda_build.xml used in the build process but we have used the same xml file bundled with the above mentioned ".sar" file..
Please help or suggest someone who can help me out from this...
Thanks & Regards.
Sandeep SolankiHi Alkis.
First, you need to specify the fully qualified class name of your based-RequestProcessor class in the config.xml file like
<controller contentType="text/html;charset=UTF-8" locale="true" nocache="true"
processorClass="com.mycompany.struts.framework.MyRequestProcessor"/>
If you review the source code of the ActionServlet and RequestProcessor classes, you can see that overwritten methods (by you) are executed every time the client makes a request to the struts based application.
I hope you can run your approach. And it will be excellent you can shared how you will do it.
Kindest regards. -
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa
Maybe you are looking for
-
I purchased addional storage for iCloud after being advised that I was running out of storage. Later I discovered a iPhone which I do not own was added to my account . How I don't know. Anyway I want to cancel and get refund. How can I do this. Try v
-
Suppose I have got a production order for 100 Nou2019s. I have maintained the rejection percentage as 2%. I have maintained 4 operations 10, 20, 30 and 40. While running MRP, planned order generated for 102 Nou2019s. After that I have released the pr
-
Apparent problem with Ovi Suite and Win 7 64 bit
Hi Apologies if this has already been covered, but i have searched quite thoroughly and i haven't come across the specific problem i'm querying. I'm running Windows 7 64 bit, with PC Suite 7.1.51.0, which runs just fine. I intend to upgrade to the su
-
Post-upgrade DSfW configuration fails on 'kinit -E'
I'm trying out an upgrade from OES2SP1 to OES2SP2 on a test server. This server is dedicated to DSfW, nothing else is running on it. I did the upgrade through patch channel, and am now stuck on the configuration which comes up after the first boot. T
-
Partner function not determined if not made mandatory in customizing
Hi! I have never come across this issue before so maybe it is standard system behaviour. My client is on a ECC 5.0 system and has the need to set upp an new partner function on the ship-to-party which should be derived on the delivery. I have set up