Problem with update of firmware for 5300

Hi,
I have following problem while trying to update my firmware from version 5.51 to 7.00 on my 5300:
I am connecting the phone through usb cable to PC-suite 7.0.9.2 and the update starts normally. Works fine till it reaches exactly 15%. There it shuts down the phone and loses the contact with the phone. Now I am asked to reconnect the phone and click retry. Same thing again and again and... again........
Note that I can not start the phone untill I disconnect the cable and take out the battery!
Does any one know how to get over this point and end the update???

EI! How come no one answered this topic? Help this dude please.. Coz i'm in the same case as he has.. oww, man..

Similar Messages

  • Problem with Updated Webcam Software for Windows 7 (I AM NOT USING THE BETA VERSION OF WINDOWS 7)

    I have a dv5-1235dx.  HP posted new software for Win 7 (64) built in camera software.  The install seemed to go fine, but once you click to run the software, nothing happens, so it seems.  About a minute or so later, the application opens.  Why is it taking so long to open.  I have uninstalled/reinstalled multiple times and the problem still exist.  I have tried to go back to the old vista version of the software (running in cap mode), but now that software takes a long time to load.  I have done a restore, with no affect.  What happened?  Note:  I am using the full retail version, not a beta of Win 7 Ultimate.  None of the other Updated HP software has this problem.  HP won't help because Windows is not officially released yet.

    HP MediaSmart Webcam here
    Message Edited by Daniel_Potyrala on 10-17-2009 03:03 AM
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Problems with updating MSN Messenger for Mac

    Install the MSN Messenger for Mac from Application. When I signed in, a message pop up asking me to get a new updated version or else I could not continue to use the MSN Messenger. During downloading, another message pop up saying that the Messenger.bin is neither compressed .... and I could not go any further,and as such could not use MSN Messenger. What's the problem here?

    nkmz02:
    Welcome to Apple Discussions.
    To download click here.
    Good luck.
    cornellius
    Message was edited by: cornelius

  • Problem with updating ABC indicator for Material

    Hi All,
    My client wants to run cycle count for one warehouse.Since the material master does not have ABC indicator in Storage view, Iam using MIBC for updating the Material Master. But after executing MIBC also ABC indicator is not getting updated in the Material master. Please help.
    Rgds
    Srinivas

    Hi, You need to have an history of at least several months of movements in order to do this analysis. You need also to flag "all articles held in stock" in order to select articles without ABC indicator. Rgds, Philippe

  • Problem with update QuickTime player for OS X 10.5.8

    Hello everybody. I have Mac OS X 10.5.8 and today I couldn't open iTunes because as it was written in opened window my QuickTime has the old version (7.4). But there is no new version for OS X 10.5.8. What should I do? How to improve it?

    Let's try installing a QuickTime 7.7 for Leopard using a .dmg installer downloaded from the Apple website:
    http://support.apple.com/kb/DL761

  • Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

    Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
    Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
    Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
    Statements in called form (Form name: FORM_CHILD):
    go_block('display_block') ;
    do_key('execute_query') ;
    -- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
    -- from TABLE_A.
    -- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
    -- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
    if user_choice = 'YES' then
    commit ;
    else
    rollback ;
    end if ;
    Statements in calling forms:
    There are two calling forms having following statements and it is going to call the above said called form.
    CALLING FORM 1
    Statements in KEY-COMMIT trigger:
    post;
    call_form(form_child, no_activate) ;
    Statements in ON-INSERT trigger:
    select column_1
    from table_a
    for update of column_1
    where column_2 = 'X' ;
    update table_a
    set column_1 = column_1 + 1
    where column_2 = 'X' ;
    insert into table_b ...;
    insert into table_b ...; Statements in KEY-COMMIT trigger:
    post;
    call_form(form_child, no_activate) ;
    CALLING FORM 2:
    Statements in ON-INSERT trigger:
    select column_1
    from table_a
    for update of column_1
    where column_2 = 'X' ;
    update table_a
    set column_1 = column_1 + 1
    where column_2 = 'X' ;
    insert into table_b ...;
    insert into table_b ...;
    insert into table_b ...;
    Our understanding:
    Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
    So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
    After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
    Actual happenings or Mis-behavior:
    Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
    The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
    Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
    Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
    Our mail ID: [email protected]
    Thanks a lot in advance.

    You have several problems:
    1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
    2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
    All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
    Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

  • Problem with updating the PC Updater software

    Good evening (from Germany). I have a problem with updating my Nokia Software Updater. I can download the setup and I can execute this. But when the installation starts (0%) a error message appears. It's a problem with Windows Installer but I don't know how to solve the problem. Here is a picture with the exactly error message:
    http://img-up.net/?up=Nokia_probES8HJXXg.jpg
    I hope somebody knows the anser with this software...
    Greetings
    OS: Windows XP SP2
    Phone: Nokia 3110 classic Firmware: V 5.50
    Message Edited by dernamenlose on 24-Apr-2008 08:56 PM

    Good morning (from Denmark).
    I hve the same problem.
    OS: WinXP SP2
    Phone: N73.
    Greetings.

  • Problems with updating files in the cloud

    problems with updating files in the cloud

    What kind of problems?
    Have you recently upgraded to iCloud Drive on your iOS devices with iOS 8?
    Be aware, be careful, be prepared for iCloud Drive | TUAW: Apple news, reviews and how-tos since 2004

  • Updating of firmware for drive Optiarc DVD Rw AD-5680H

    updating of firmware for drive Optiarc DVD Rw AD-5680H
    it seems compulsory since burning of DVD Verbatim disks are failed
    but successful with Verbatim DVD -RW
    Mac Mini ,Mountain Lion etc
    the drive of my PowerBook Pro
    works well
    Mashita DVD -R UJ -868
    where can I find and download this updafe
    THKS

    Failure with one type of optical media and not another -- even from the same manufacturer -- is not unusual. DVDs and DVD-RWs use different dies that respond to different lasers in the optical drive. There are numerous other possibllities here.
    It would not be unusual if the write laser for DVDs has burned out but the DVD-RW is still working becasue they use entirely separate lasers of a different intensity and frequency.
    It may be the dyes used in a particular lot of Verbatim DVDs are not quite compatible with the DVD lasers in your drive (that is independent of DVD-RWs because they use different lasers.
    Because of manufacturing variations your drive may burn other brands of DVD blanks flwlessly, but just won't work with Verbatim DVD blanks.
    The DVD Read/Write lasers in your drive may simply be dirty.
    Changing/updating the firmware in an optical can be done, but there is a definite risk of converting the optical drive into something useful only as a paper weight.
    Try another brand of DVD blank or even a different model Verbatim. (I have seen cases where discs from a different manufacturing lot from the same vendor worked when another failed.)
    If you are using DVD-R blanks try a DVD+R (there again different lasers are involved.
    It is tricky to clean slot loading optical drives, but sometimes simply blowing them out with short bursts of canned air will work. Be sure the computer has been powered down for a good while and the optical drive is completely cooled. Then use only short bursts of air to prevent super cooled liquid air from getting into the drive. That can easily crack the lenses if you aren't careful.
    If your Mac mini is less than a year old or you have Apple Care, get an appointment and take it to the Genius Desk of the nearest Apple store. If you aren't covered under warranty a bus powered external optical drive very probably costs less than the labor charge to diagnose the issue with your drive.

  • Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    Problem with update MUSE CC 2014.2 (october 6). after upgrading to the new version of Muse crashes very often (out without notice).

    HELP! i can't get ANYTHING done in the new muse - keeps closing.  once it crashes - i can't get the file back open!
    i've lost all my work!
    from my desktop - when it stared happening was with the updated version:
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:36:38 2014
    ========================================
    [00:00:42.416] Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:success size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014 highestUID: 3548
    [00:01:03.898] Preparing to Save As over "\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse" exists: true
    [00:01:17.516] SaveAs complete for file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' file size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highest UID:3551
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:03 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:07 2014 UTC: Error: CSI: OOBE: Serial Number: Error Code: O-10 Error Message: Unable to retrieve the serial number (Note: this may not be an error)
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Error: CSI: IMS: Connect: Error Code: I-200 Error Message: No Account
    Build 232: Mon Nov 3 19:41:21 2014 UTC: Unknown IMS error 'SHARED_NOACCT_ERROR' has occurred when retrieving IMS token.
    Build 232: Mon Nov 3 19:41:57 2014 UTC: Opening file '\\D-LAPTOP\_websites\dsbees muse\dsbees.muse' with status:This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version. size:9797632 mod Date:Tue Sep 23 15:51:42 GMT-0500 2014
    Build 232: Mon Nov 3 19:41:57 2014 UTC: This Adobe Muse site file requires a newer version of Adobe Muse. Please update to the latest version.
    Logging in build 2014.2.1.10 started at: Mon Nov 03 13:43:17 2014
    ========================================
    [00:00:21.481] Opening file '\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse' with status:success size:9830400 mod Date:Mon Nov 3 13:37:51 GMT-0600 2014 highestUID: 3551
    [00:00:30.373] AssertInDebug: Unable to run recovery. User file remains locked after 5 second pause.-assertInDebugOnly+DataBase/recover+MuseSite$/recover+MethodInfo-2886+DataBase$/run Recovery+apply+UIComponent/callLaterDispatcher2+UIComponent/callLaterDispatcher+end stack
    [00:00:30.404] Failed to recover file:\\D-LAPTOP\_websites\dsbeesTWO\dsbeesTWO.muse
    [00:00:30.420] Calling openConnection for file that doesn't exist? C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ Parent folder exists.
    [00:00:34.429] open of SQL connection failed for C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ
    [00:00:34.429] Failed to open mini-save connection B "C:\Users\Owner\AppData\Roaming\com.adobe.AdobeMuseCC.2014.2\Local Store\Recovery\JXRoDn335LE0UosOdoStnQ" Doesn't exist. Folder exists. error:SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'
    [00:00:34.429] EXCEPTION:[SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'-SQLConnection/internalOpen+SQLConnection/open+DataBaseConnectionWrapper/o penConnection+MethodInfo-28954+EventDispatcher/dispatchEventFunction+EventDispatcher/dispa tchEvent+MethodInfo-28938+end stack
    [00:00:34.445] AlertAndExit because of: [SQLC/internalOpen] SQLError: 'Error #3125: Unable to open the database file.', details:'Connection closed.', operation:'open', detailID:'1001'

  • I am having problem with updates CS5

    Hi,
    I am having problems with updating my CS5. I keep getting an error message "There was an error downloading this update. Please quit and try again later"
    Can you please help?
    Thank you
    Eli B

    See if doing it manually works
    All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

  • Hello. i have a problem with updating illustrator CC 2014. i succeed updating indesign CC 2014

    hello. i have a problem with updating illustrator CC 2014. i succeed updating indesign CC 2014 & photoshop CC 2014, but every time i try to update illustrator CC 2014, its failed.
    how can i solve this problem?

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • Y510p and problem with Update Nvidia Driver

    Hi everyonei have problem with updating my y510p lenovo laptop nvidia driver ,my current nvidia driver version is 327.62 which i download from lenovo website,Now for better performance in new games like gta v and witcher3 ,i decide to updating nvidia driver,first remove my nvidia graphic driver from add or remove then download nvidia ver 350 from nvidia official web site , which nvidia website confirm it support my graphic card which is Gt755m , then i install new ver and during install i check clean install , after successful install , restart laptop , then there was problem . when i try to open nvidia control panel it wont running and an error showed up and said "You are not currently using a display attached to an NVIDIA GPU" .i try to open a game , game running in really low fps and i find out game run on hd graphic of my laptop and my nvidia graphic wont run .The only way to repair was i install my last nvidia driver 327.62 and run a system restore .guys what is your suggestion and how i can update my y510p nvidia driver ?Thanks   

    Hi Y510Man,
         The video graphics installation order is important. You need to install the Intel Graphics first, and then do the Nvidia. IIRC you should un-install the Nvidia driver, then re-install (or upgrade) the Intel HD Graphics driver. Reboot, and install the new Nvidia driver.
         I don't know why, but every time I upgraded my Y470 Nvidia driver, I had to use this procedure. First install, or re-install, the Intel driver, then install the Nvidia. You can't just upgrade the Nvidia driver without a re-install of the Intel. I think it has to do with the Optimus setting, and the automatic switching.
        Let us know how it goes.
    Cheers
    DragonRider

  • Never ending problems with update.

    It can't be done, always ending with an error message. Uninstall and install back doesn't help. Why don't you fix the the update engine, Adobe? I'm on Windows 7 machine and the only problem with update I have is with Flash Player and Acrobat Reader. It's so frustrating.

    Hi acq742801,
    I understand your frustration.
    But I would be able to sort it out once you'll let me know what exact error do you get while updating.
    Also, in addition to Flash Player, are you getting update error for Adobe Acrobat or Reader or both?
    If possible, please share the screenshot so that I can check at my end.
    Hope to get your response.
    Regards,
    Anubha

  • T5120 Jumpstart: unable to update system firmware for automatic reboot

    Hi,
    i'm trying to install a T5120 using the jumpstart framework. During the installation the new boot device should be set but instead i get the information that is was not possible to do so.
    Installing boot information
            - Installing boot blocks (c0t0d0s0)
            - Updating system firmware for automatic rebooting
    WARNING: Could not update system for automatic rebooting
    WARNING: CHANGE DEFAULT BOOT DEVICE
             If you want the system to always reboot Solaris from
             the boot device that you've specificed (c0t0d0s0),
             you must change the system's default boot device using
             the eeprom(1M) command after installing Solaris software.the diag-switch is set to 'false'.
    {0} ok printenv
    Variable Name           Value                          Default Value
    ttya-rts-dtr-off           false                          false
    ttya-ignore-cd           true                           true
    keyboard-layout
    reboot-command
    security-mode           none                           No default
    security-password                                      No default
    security-#badlogins   0                              No default
    verbosity                   min                            min
    pci-mem64?              true                           true
    diag-switch?              false                          false
    local-mac-address?   true                           true
    fcode-debug?            false                          false
    scsi-initiator-id           7                              7
    oem-logo                                                 No default
    oem-logo?                 false                          false
    oem-banner                                             No default
    oem-banner?             false                          false
    ansi-terminal?            true                           true
    screen-#columns       80                             80
    screen-#rows            34                             34
    ttya-mode                 9600,8,n,1,-                   9600,8,n,1,-
    output-device           virtual-console                virtual-console
    input-device              virtual-console                virtual-console
    auto-boot-on-error?  false                          false
    load-base                 16384                          16384
    auto-boot?                 true                           true
    network-boot-arguments
    boot-command          boot                           boot
    boot-file
    boot-device               disk                           disk net
    multipath-boot?         false                          false
    boot-device-index      0                              0
    use-nvramrc?            false                          false
    nvramrc
    error-reset-recovery    boot                           bootDoes anybody have any ideas what the problem could be?
    I browsed several boards and a huge set of websites but did find anything related.

    At the first time yes, because i'm using an extra raid controller. That's because the environment 'boot-device' has to be set to a value different than 'disk'.
    At the end of the jumpstart installation i have to type 'init 6' for reboot manually and the environment 'boot-device' has its default value. Thats why the server isn't boot and fall back to net boot.

Maybe you are looking for