Problem with Upgrade from Windows 7 to Windows 10

I tried to get Windows 10 on my Probook 4540s and it downloads fine.  It then checks the software on the computer and find a program that is not compatable and says I must uninstall it to continue.  I would uninstall it but want to be sure I am noy going to cause more issues by doing so.  The program that it does not like is the HP tools software, it includes the biometric scan and such.  Would it be safe to uninstall these or should I wait to see if there will be a workaround for this issue.

There is no workaround other than removing it as suggested, that software is not compatible with W10 and never will be.

Similar Messages

  • Samsung SSD causing problem with upgrade from Windows 8.0 to 8.1

    I'm having trouble upgrading my HP Desktop from the OEM installed Windows 8.0 to 8.1.  I first attempted the upgrade when 8.1 was first rolled out.  It seemed to upgrade okay, but after a reboot I was left with a black screen... no error messages, just a black screen.
    I retried it this morning, but this time it failed with DPC_Watchdog_Exception and then Machine_Check_Exception.  After searching through several forums, I'm "guessing" it may be Disk 0, which is a Samsung 830 Series SSD (Model: MZ7PC256/0H1, s/n: S0U3NSAC705912, p/n: MZ7PC256HAFU-000H1) that was installed and configured by HP when I ordered this desktop in 2012.
    Samsung's Magician software doesn't recognize this SDD as a supported product, but they do identify it as a Samsung MZ7PC256HAFU-000H1, with Firmware version CXM05H1Q.  I thought I'd see if a firmware upgrade was available, but there's no information about this SSD on Samsung's support site. Also, HP doesn't offer any firmware for this SSD... not even the original firmware.  Everything I've seen on the internet says it's a custom OEM SSD that's not supported by Samsung. 
    I'm not desparate to upgrade to Win8.1, but I would like to know exactly why the upgrade keeps failing.  I have another SSD available (a Samsung 850 Pro, model: MZ-7KE256BW) that I've considered using to replace the current Drive 0, but I hate swapping out parts without knowing it's actually the problem.
    I'm open to advice. The info on my current system follows. Also, I should point out that there are no device conflicts nor outdate drivers.
    HP Envy h8-1420t CTO Desktop PC, s/n: 2MD3020CF9, Product No. C1U69AV #ABA
    Windows 8 Pro 64 (installed by HP)
    Intel Core i7-3770 3rd Gen, Quad-core (Ivy Bridge) 64-bit Processor, 3.4GHz
    Memory: 16GB DDR3
    Drive 0: 256GB SSD, Samsung 830 Series, Model: MZ7PC256/0H1, s/n: S0U3NSAC705912, p/n: MZ7PC256HAFU-000H1
    Drive 1: 1TB 7200 rpm SATA hard drive, Model: WD10EZEK-60ZF5A0, s/n: WCC1S1261511
    Drive 2:  750GB SSD, Samsung 840 Series, Model: MZ-7TE750BW, s/n: S1DMNEADB03609
    This question was solved.
    View Solution.

    Hi,
    You will find the latest firmware for the Samsung 830 at the Samsung SSD download site.  Additionally, you will also find the latest version of the Samsung Magician.
    Backup your data and be sure to create the external HP recovery media.
    I prefer not to clone but rather to use the external HP recovery media to load the SSD.
    If you are not on the latest SSD firmware then flash the SSD.  Use the latest version of the Magician to do so.
    Disable Secure Boot in the BIOS before cloning the hard drive.
    Then reformat and clone the SSD using the latest Samsung migration software. Use the original HP hard drive as the source and it needs to be intact as you need to bring across all of the partitions.
    Power off the PC and disconnect the original boot HD.
    Connect the SSD to the original boot SATA port.
    Do not have any other SSDs or hard drives connected that contain an EFI partitions or you might run into issues with multiple Windows boot loders.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Windows 8.1 Problem with games from windows store.

    I've got a problem with games from windows store. The installation is going well without any problems, however when I try to open it it's loading and then it turns off. The same problem happens when I try to use Games for Windows. I've use a sfc scan and
    it shows some errors but unfortunately it cannot fix them. Should I share the CBS log or find the solution somewhere else? I hope you help, best regards.

    Hi,
    According to my experience, the problem like store game app open failed probably caused by hardware driver. such as Audio and Graphic driver. So, first of all, please try to reinstall these two driver to fix this problem for test.
    In addition, for SFC scan failed problem, it can be caused by many reasons, I would suggest you use another command to fix your system for test.
    Dism /Online /Cleanup-Image /ScanHealth
    Also you can test SFC command in Windows 8.1 safe mode.
    Thirdly, if problem persists, please check Event Viewer, generally speaking, it would record the app open failed events.
    Roger Lu
    TechNet Community Support

  • Problems with switch from Windows to Mac

    I recently switched from Windows PC to a new Mac and cannot install the Acrobat 7.0 Professional CD that I used with Windows on the Mac. Am I missing something, or do I need to buy a whole new product?

    No Windows program will install on Macintosh (a very few products have
    both Windows and Macintosh on one disk, but not here).
    If you call Adobe you can buy a "crossgrade" for a reduced price. You
    will need to upgrade to Acrobat 9.0 at the same time.
    Aandi Inston

  • Problem with recovering from windows phone 10 to 8.1

    I installed windows phone 10 on my phone (lumia 730) and after a survey decided to turn back to WP 8.1. So, I installed windows phone recovery tool on my lap top and connected my phone with in. In the middle of recovery process the connection failed and
    my phone turned off. Now, it does not power on and there is no response to charge and it seems the phone is dead. please guide me in this way.

    The Developing for Windows Phone forum is for developers to discuss writing their own Windows Phone apps. For help with using Windows Phone please post on the Windows Phone forums on
    http://answers.microsoft.com .
    --Rob

  • Problems with migration from Windows to Mac

    I recently purchased a new Macbook Pro and proceeded to move my Lightroom program and catalog to the new computer.  I have 77,000 digital image files stored on an external hard drive, so I placed my catalog on the external drive to make the move to the new machine.  I plugged the hard drive into the new laptop and wasn't pleased to see that my catalog seemed to work fine.  However, when I ran the 'find missing files' command the program identified over 22,000 images that couldn't be located.  When I manually went to point the catalog to the files' locations nothing happened.  Repeating the locate missing files command produced an error saying that the image couldn't be used because it was already linked. 
    I'm confused about what to do here..... about the only thing I can thing of now is to totally recreate the catalog, which would of course make me lose the work I've done for the last 9 months. 
    Any suggestions?
    Dan

    No Windows program will install on Macintosh (a very few products have
    both Windows and Macintosh on one disk, but not here).
    If you call Adobe you can buy a "crossgrade" for a reduced price. You
    will need to upgrade to Acrobat 9.0 at the same time.
    Aandi Inston

  • DB disk space problem with upgradation from oim 9.1 to oim 11.1.1.5

    Hi All,
    Aim: we have to upgrade oim9.1 to oim 11g, with new data cente ( we are doing this in DEV env)
    constraint: DB diskSpace is 30 GB
    As part of upgradation, we have to import the existing oim 9.1 Db to new DB, Here we faced the size problem, our Dev DB data size is 100GB (which is going to import into new DB), but new DB disk space is 30GB only.
    Which tables, do we need to truncate, so that It should not effect upgradtion( we should not miss, oim objects other than User/log inforamtion)?
    Do OIm11g(11.1.1.5.0) has any constraints over DB size with 30 GB?
    Please suggest me.
    Thanks.

    The UPA tables are audit related. I doubt you could truncate any of the others and not affect something else.
    -Kevin

  • Problem with upgrade from 5.96 to 6.0 PL31

    hi i received the following error when trying to upgrade to PL31:
    Upgrading Synch information to version 630
    Data is Null. This method or property cannot be called on Null values.
       at System.Data.SqlClient.SqlBuffer.get_String()
       at System.Data.SqlClient.SqlDataReader.GetString(Int32 i)
       at NetPoint.SynchSBO.Upgrade.Version._629To630()
       at NetPoint.SynchSBO.Upgrade.Version.Resolve()
       at NetPoint.SynchSBO.Synch.SynchAll()
    thanks
    Greg.
    Edited by: Grzegorz Jachec on Oct 13, 2008 4:55 PM

    Hi Greg,
    There are probably null in OOIN.U_PRX_SID.
    If this is the case.  Just change them to '0' and you should be good.

  • 10.1.3.3 setup Java problem when upgrading from 10.1.3.2

    Hi guys!
    I have a problem with upgrade from 10.1.3.2 to 10.1.3.3 on Windows
    The documentation is old what you can download! So I cannot find anything.
    The Infrastructure Installation and Configuration Guide is for 10.1.3.2.1 and from april 2007
    The Infrastructure Upgrade Guide goes from Siebel to OBI and from december 2006
    The problem is
    I have a fully functional 10.1.3.2 with all Java and everything.
    When I start the server install I get the following error in a small window:
    Java.lang.NoClassDefFoundError: run Exeption in thread "main"
    Where should I look? Should I uninstall the previous version?
    Thanx,
    Istvan

    I had the same problem when I did the upgrade the very same day of the release. And the solution for me was to login using my battery. For some reason, GDM won't let me in if I'm plugged (I know it sounds crazy, but it works for me)
    Best of luck

  • Upgrad from Windows 8 Pro on Windows 8.1 Pro with Media Center!

    Hello,
    I did upgrade from Windows 8 Pro on Windows 8.1 Pro with Media Center. Now the problem is when I press on any file with the right mouse button is normally open curtain menu, but when I press on any folder, right-click, the system crashes after a few seconds
    and back up.
    Best regards!

    Hi,
    Go Start>Control Panel>Administrative Tools>Event Viewer and scroll through the logs for System and Applications to see if anything shows up in red as Error or Warning.
    Meanwhile, going to HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers
    in regedit.exe, backing up the whole ConxtentMenuHandlers folder, and then start deleting all of them one by one and continuously testing the right click.  Of course import the Context folder after you find it, test once again by right clicking
    to make sure you found the problem, and delete the file that caused the problem.
    Karen Hu
    TechNet Community Support

  • Problem with upgrade Windows 2003 to Windows 2008

    Hi,
    I have problem with upgrade Windows 2003 to Windows 2008 R2
    When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall  "adaptec storage manager" but I already remove this driver from the system and registry.
    Any ideas to solve this problem?
    My server it's IBM System x3500
    Regards 

    Not sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
    Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
    AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
    In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
    0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
    1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned. 
    2. Uninstall IBM ServeRAID from the system, just in case
    3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
    4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else. 
    5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
    6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker.

  • Problem with upgrade windows 7 to windows 10 preview [HP2540p]

    Hello Everyone,
    I have a problem with fresh installation windows 10 preview from usb on HP Elitebook 2540p machine.  
    After message "windows is loading files" laptop is shutdown for a few seconds...
    Installation is interrupt
    I tried installed with iso prepared for UEFI or BIOS
    I have searched information on internet but I still can not  find anything.
    I also upgraded BIOS to 50 ver.
    Is there any possibility to install this OS on that machine?
    Maybe somebody of you had faced with similar problem?
    regards,
    Adam

    Finally I have solved this matter
    The problem was related with memory RAM.
    I had installed two memory in laptop:
    - original installed 2GB 1333MHZ Hynix
    - by me added 4GB 1333MHZ Corsair.
    Regarding with hardware specification memory bus is working at maximum 1066MHZ
    http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=null&docId=emr_na-c02068850
    I suppose that these differences were reason of my problems.
    Probably Corsair can not work with lower speed...
    When I removed 4GB RAM instalator windows 10 was started without issues.
    What is strange after installation I did test and once again installed 4GB memory and Windows is working... It is amazing
    Thanks for attention and help!

  • Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

    I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC.  It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
    connected to the network and try again."
    I have no problem copying files from the server to the PC.
    Any ideas?

    Hi,
    How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
    To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
    Secondly, try to use Network Monitor to capture network communication package for test.
    Network Monitor:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    Roger Lu
    TechNet Community Support

  • SAP Server upgrade from Windows 2003 and 2008 R2 with Oracle Database

    Hi,
    We need to upgrade upgrade our Windows servers that are running our SAP systems from Windows Server 2003 to Windows Server 2008 R2.  We are using Microsoft Clustering for HA so an inplace upgrade seems not possible.
    Someone has suggested to us that we will need to export our database and reimport it to achieve this upgrade however but I cannot understand why this would be necessary (we are not changing the underlying filesystem!).
    Could someone please confirm whether a database export and import is required for this OS upgrade scenario?  I have done a bit of research but nothing has jumped out and now I need an answer to this quickly.
    We are running
    - ERP 6.0 NW 7.01 (soon to be 7.02 with ABAP stack only)
    - XI(PI) Java & ABAP
    - SRM (Java & ABAP)
    - Portal (Java only)
    - PLM (Java & ABAP)
    - BW (BI 7.0) (Java and ABAP)
    Thank You
    Felicity

    Hello,
    You need to go for 'Homogeneous System Copy' to achieve this, but since almost all the systems in your landscape include the Java Stack as well - so the system copy with Export/Import is to be carried out.
    Even if you are not going for file system change, but it is a Windows environment and you can't put SAP up on the target Windows (windows 2008 R2) just by copying the contents and file system from source to target. You need SAPinst to create the registry and all. - On top of that you have Java stacks involved, so for java stack you can't carry out just backup/restore method to put SAP up there on target - so you need Export/import because for java stack some OS level dump is to be collected during system copy from source and it needs to be imported on target OS.
    Are you clear on this one ?
    Read system copy guide once and Search in OSS for the Notes to check how to upgrade from Windows 2003 to Windows 2008 R2.
    Thanks

  • Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1

    have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1.    Lost all software and data.
    how to re install elements11. (downloads purchased in your store 2013-05)
    [email protected]

    have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1.    Lost all software and data.
    how to re install elements11. (downloads purchased in your store 2013-05)
    [email protected]

Maybe you are looking for

  • OUTSTANDING PO QTY AND OUTSTANDING PO VALUE

    Hi     I am in need of report to print outstanding po qty and outstanding po value. could any one please give me the source code.. Its very urgent.....                Thanks in advance

  • How I can begin to start on self learning basis PL/SQL I mean writing block

    Could you please let me know about how One can get the expertise and start on self learning basis PL/SQL procedural on which actually HTML DB is written I am very much interested in learinig this language please provide me any useful link books onlin

  • Where to find Drivers and Manual for Edge 15

    I bought a Lenovo Edge 15 Mode: 80H1 from BestBuy. Where do I find the drivers, manuals, and other related support docs for this specfic model? When I search for it here, http://support.lenovo.com/us/en, I can't find it.

  • Sql function call

    Hi, I was wondering if it's possible to execute a custom sql query (built in mysql)? example : "SELECT assy_021_check(0801979291) AS TEST" assy_021_check is a function code into mysql database. With a regulat query, verything works, but if I use this

  • Stationarys look great on Windows and using webmail in a browser.

    That is great news. I was afraid it would look weird on Windows, or not show up at all in the viewer, but as several attachments making windows users go berserk at people sending mails from a Mac. Great work Apple!