Problem with upgrade windows 7 to windows 10 preview [HP2540p]

Hello Everyone,
I have a problem with fresh installation windows 10 preview from usb on HP Elitebook 2540p machine.
After message "windows is loading files" laptop is shutdown for a few seconds...
Installation is interrupt
I tried installed with iso prepared for UEFI or BIOS
I have searched information on internet but I still can not find anything.
I also upgraded BIOS to 50 ver.
Is there any possibility to install this OS on that machine?
Maybe somebody of you had faced with similar problem?
regards,
Adam

Finally I have solved this matter
The problem was related with memory RAM.
I had installed two memory in laptop:
- original installed 2GB 1333MHZ Hynix
- by me added 4GB 1333MHZ Corsair.
Regarding with hardware specification memory bus is working at maximum 1066MHZ
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=null&docId=emr_na-c02068850
I suppose that these differences were reason of my problems.
Probably Corsair can not work with lower speed...
When I removed 4GB RAM instalator windows 10 was started without issues.
What is strange after installation I did test and once again installed 4GB memory and Windows is working... It is amazing
Thanks for attention and help!

Similar Messages

Problem with upgrade Windows 2003 to Windows 2008

Hi,
I have problem with upgrade Windows 2003 to Windows 2008 R2
When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall "adaptec storage manager" but I already remove this driver from the system and registry.
Any ideas to solve this problem?
My server it's IBM System x3500
Regards

Not sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned.
2. Uninstall IBM ServeRAID from the system, just in case
3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else.
5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker.

Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

Problem With Captivate 4 and Windows 8

Hi,
I've a problem with Captivate 4 on Windows 8 projects :
The mouse is not tracked.
I've applied the last patch for this version (11/15/2011).
Is there another patch for this ?
Thanks a lot.

Hi there
I know this will come off as sounding snarky, but please know it's honestly not intended that way,
Windows 8?
I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Has anyone else had problems with their RAW editing window?

I'm having real problems with my RAW editing window (the one that automaticaly pops up when you open a raw file). I've opened several images, but when I click on the different thumbnails on the left hand side the large preview image in the center doesn't change. Obviously I need to be able to see this to make the required changes.
Any ideas/help you be greatly appreciated!!!

Hi Kate,
I haven't yet been able to replicate your problem. Will you please describe your workflow? Are you simply selecting multiple files from your computer and double clicking to automatically open in Camera RAW?
Also curious, with all of your images open in the RAW editing window, what happens when you use the arrows near the bottom right? Does your image change?
Cheers,
Michael

Problems with shutdown, expose and window switching

Hi there,
Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
Any thoughts would be gratefully received.
TIA,
Mat

This sounds interesting.
Can you post a copy for the rest of us to see?
As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
Also, are you creating an installer and using that to install? If not, you may wish to try that.
Try to take over the world!

Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Problem with national characters on windows client

Hello there,
I'am having problem with national characters on windows client.
All national data stored in NVARCHAR2 colums, applications (.net) works fine,
but in sqlplus:
select city from test_table;
- everything ok, sqlplus shows national characters
select dump(N'<national symbols>') from dual
- returns
Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
select * from test_table where city = N'<national symbols> '
- always returns nothing
As i understand the problem in
sql query text (and national literals) convertion
to servers "WE8ISO8859P1" encoding, Is it possible
to solve the issue?
Thanks in advance
PS.
Console in right mode (chcp=1251)
sqlplus shows russian messages well
Server (oracle 9 on solaris):
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_SAVED_NCHAR_CS WE8ISO8859P1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 9.2.0.6.0
Client (windows server 2003, oracle client 10):
NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz

Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Problems with upgrading firmware in Zen Micro 4

I am currently having a problem with upgrading the firmware on my Zen Micro 4 GB. The Zen Micro seems to hang right after the first reboot, therefore not finishing the whole upgrade. I am currently trying to upgrade to 2.2.02. It seems that whenever I try to reboot the Zen Micro while it is connected via USB, it hangs at the Creative Logo and I have to end up resetting the system. Oddly enough, I have a second Zen Micro that I was able to upgrade the firmware with no problems whatsoever. Any suggestions?
P.S. I do have Windows XP SP2 with WMP 0 installedMessage Edited by Hubmasterflex on 0-07-2006 04:23 AM

Try using reload OS in the recovery mode to erase the current firmware, then connect to the PC and reload. You take a risk doing this though as if the firmware won't reload from the PC you'll be left with an effecti'vely useless player, and you'll have to contact support to get a replacement.

Problem with upgrade Extension Manager 6.0.4

Problem with upgrade Extension Manager 6.0.4, code error U44M1P7

What version of the Adobe Application Manager are you using? Which operating system are you using?

Has anyone had problems with upgrading iPhoto. I am, it's stops at 5 0f 9 and will not finish!! Can someone please help me out?

Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?

iphoto upgrading: Apple Support Communities
iphoto upgrade hangs: Apple Support Communities

Serious problem with X1 carbon after windows 8 upgrade

Hello,
I've just purchased my new X1 carbon this week, came with 3 discs to upgrade it from Windows 7 to 8. Now I've followed the steps and everything worked fine. But, my laptop lags A LOT. For example, while I am using on it, the "writing/reading to SSD" lamp lights up and my laptop hangs up for seconds then it's back. It keeps doing this multiple and multiple of times!!!
Any help please!

Victorymarketin, welcome to the forum.
Since they are both Microsoft programs, I suggest contacting MS Customer Service for help. They have always gotten me up and running in short order. This is always my solution when I have MS related problems. They if anyone can, will solve your problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Problem with upgrade windows 7 to windows 10 preview [HP2540p]

Similar Messages

Maybe you are looking for