Problem with uploading images in interMedia

Hi,
I'm a newbie trying to upload images to the Database (Oracle 10g release 2) using interMedia. I created a test table called hmm:
create table hmm(product_id number, product_photo blob);
Then I tried to insert the image into the table :
SQL> insert into hmm (product_id, product_photo) values
(3003,ORDImage.init('FILE','MEDIA_DIR','mvd.jpg'));
and I got the following error :
insert into hmm (product_id, product_photo) values (3003,ORDImage.init('FILE','MEDIA_DIR','mvd.jpg'))
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected BLOB got ORDSYS.ORDIMAGE
Can somebody explain.
Thanks,
Steve

Hi Steve,
Yes, you created your table with a 'blob' type:
create table hmm(product_id number, product_photo blob);
But your insert assumes the product_photo column is an ORDImage type:
SQL> insert into hmm (product_id, product_photo) values
(3003,ORDImage.init('FILE','MEDIA_DIR','mvd.jpg'));
The error: "ORA-00932: inconsistent datatypes: expected BLOB got ORDSYS.ORDIMAGE" is telling you it expected a BLOB in your insert because your table was created with a BLOB type.
If you change your table creation to this it should work:
create table hmm(product_id number, product_photo ORDSYS.ORDIMAGE);
You might want to take a look at the interMedia Image Quick Start on Oracle Technology Network. It should get you up and running quickly. You can find it here:
http://www.oracle.com/technology/products/intermedia/htdocs/intermedia_quickstart/intermedia_quickstart.html
Good luck,
Sue

Similar Messages

  • I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

    I have problems with uploading images to my internet printing company when  the images have been manipulated through CS6 and  i have saved images as jpeg  the printer company tell me they are not j peg,
    but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

    Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
    There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
    Take your pick.

  • For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file.  I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

    I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
    Bad Image
    There was a problem with the image file. 
    Please help.

    Can you drag it to the Desktop?

  • Problem with scramb image MULTI DISTORTION COLOR

    PROBLEM WITH IMAGE,  SOMETIMES ITS DISTORTIONATED, AND SLOW

    Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
    It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
    Clinton

  • Problem with Atf, Image distortion

    I got a problem with image Distortion
    Here my atf in atf viewer: [IMG]http://i.imgur.com/d75aU.png[/IMG]
    Heres my atf in FLashPlayer using 11.4.402.287: [IMG]http://i.imgur.com/H2vEV.png[/IMG]
    notice the red pixel in the green part of the texture.
    Im using png2atf with no parameters.

    Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
    It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
    Clinton

  • Problem with displaying images exported to PS

    This is slightly different than the post about TIFF files not displaying properly.
    In Aperture 1.2, when I exported an image to PS and did extensive work on it, and then saved back to Aperture, it would appear in Aperture just as it looked in PS when I saved it.
    However, in 1.5, that does not happen. After I save the image, and then go back to Aperture, all of the changes I made in PS don't appear! However, if I again open the image in PS a second time, it will change to the PS version even before the image gets to PS (I can see it change right when I click "open with external editor").
    Is this a difference with how 1.2 and 1.5 handle the files? I'm guessing it has something to do with image previews, because I chose not to have Aperture generate previews when I installed 1.5 due to the slow-down issues I saw reported here.
    I'm starting to wonder what the point of upgrading to 1.5 was for me... if I can't take advantage of previews (accessing my Aperture library from other apps like Keynote, etc) and if the PS files I work on don't display properly, I'd rather go back to 1.2. This is a major problem in my workflow, since I often spend a lot of time working on images in PS, and I need to be able to see them that way when I return to Aperture.
    I'm hoping there's some setting somewhere I can use to fix this. Is there?

    David,
    I really appreciate your offer to help. However, I have the problem with all images in my library in all projects, so I'm not sure how useful it would be for you to work with a single image I upload to a server.
    I'm having the same problem on my MacBook too, though for some unknown reason there are certain projects on my MacBook that the process works fine with. I cannot tell any difference between those projects (that work) and those that don't.
    What's even more strange... if I quit Aperture, and re-open it, and then go through the process (open a file in PS2, save, return to Aperture) - it works fine! But ONLY ONE TIME. If I try the same process again, on that same image, or any other image in my library, it will not work. It only works the FIRST TIME I do it after opening Aperture. I tested this several times and got the same result.
    I am completely stumped here. I've tried generating previews for a project and turning all of the preview options on, but that doesn't solve the problem either.
    Anyone out there have a clue what might be happening? This is more than a minor inconvenience... if my image management system can't display the image as it should appear, it's unusable.
    Chris

  • Problem with Gif image

    Having a problem with gif image not showing up. It will show up in netscape6.2, but not in IE 5.0. Both are using the java 1.4 plugin. They are basic buttons (zoom in, zoom out, etc) and they actions work, just the icons aren't showing. Any help would be great! Below is a snip of code:
    JPanel toolBarsPanel = new JPanel();
    javax.swing.JToolBar toolbar = new javax.swing.JToolBar();
    JButton zoomin = new JButton(new ImageIcon("tut/zoomin.gif"));
    JButton fullext = new JButton(new ImageIcon("tut/fullextent.gif"));
    JButton identify = new JButton(new ImageIcon("tut/identify.gif"));
    JButton btn = new JButton(new ImageIcon("tut/addtheme.gif"));
    toolbar.add(zoomin);
    toolbar.add(fullext);
    toolbar.add(identify);
    toolbar.add(btn);
    add(toolbar, BorderLayout.NORTH);
    Thanks again for any help!

    I used to do a lot of work in this sort of thing. After a while we were able to convince our bosses to use generated HTML (JSPs, etc.), so the problem moved to porting JavaScript to different platforms! (Platforms in this context means the different browser/OS combinations, etc.).
    The only two things I can recommend are:
    - complete control over you code. You will have to fix it! (Tried you apps on a Mac yet?)
    - assume a minimal install. Don't assume users are going to have any fancy tools installed on their PC, unless you are developing an Intranet app, where you know the spec of the machines that are going to be using it.
    As regarding getting IE to use a relative address, I don't think you are going to have any luck their, I'm afraid! (Although I am curious. It has been some time, but I though it did use relative addresses. Are you absolutely sure about this, did you check this out with System.outs and that?
    HTH,
    Manuel Amago.

  • Problem with uploading a file in Clustered Environment

    Hi,
    I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
    Is there any solution to upload the file to all the nodes in the cluster.
    Thanks
    Kiran

    Hi,
    This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes.  However, there are some ways to get around this
    1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
    2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
    3. Store the files on a shared disk directly from the portal component.
    Cheers
    Dagfinn

  • I have a problem with vertical images burned on a cd

    I have a problem with vertical images burned on a cd either from a Mac or a stand alone burner. What happens is the images come from the card and are put on the cd. Also note the the camera has been set for the computer to automatically show images vertically when shot that way. The images look good on my Mac, but are horizontal on windows computers. Both XP and Vista. What can be done?
    John

    Hi, thank you for the response... not sure looks that the battery its ok, I'm not sure.
      Charge Information:
      Charge remaining (mAh):    4356
      Fully charged:    Yes
      Charging:    No
      Full charge capacity (mAh):    4356
      Health Information:
      Cycle count:    813
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    0
      Voltage (mV):    12571

  • Still problems with uploading articles in folio builder

    Hello,
    Read much information on this forum but i still don't have a solution for my problem. And here is my problem.
    I had a course how to create a digital publication. So went back to work and try to do the same as what i did at the course.
    Installed InDesign CS5.5 and the last folio producer tools en folio panel. Than I create a folio via the folio panel en voila it was created. So far so good.
    Than I try to add an article to this newly created folio but for some reason I can't get it in the folio and I got this message
    An error has occured while updating article layouts.The InDesign file for the layout cannot be found. (Than in Dutch because I have a Dutch version)
    So what I already tried is the following:
    - use another Adobe-ID to log in the folio panel (no succes)
    - uninstalled the publishing parts en reinstalled again the newest parts (no succes)
    - create article via import (also no succes)
    - create a local folio and than add a article (no succes)
    - Also locate the InDesign file on another location (no succes)
    When i create the article the spinner keeps on turning. When I than login to the digitalpublishing.adobe.com with the same adobe-id I see the article with a red frame around it. Which says "Corrupt layout"
    Than I send the InDesign file of an article to someone else and he can upload this file without any problems. And I am sure I have all rights/permissions which I should have.
    Is it possible that you can have problems with uploading articles because of network settings or combinations with other software?
    Has somebody a solution for this really frustrating problem?

    Hi pbremmer!
    Are you using Mac och PC?
    /Henrik

  • Problem with displaying image

    Hello!
    Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
    So.. I have the interactive report
    table test (
    NAME NOT NULL VARCHAR2(4000)
    ID NUMBER
    BLOB_CONTENT BLOB
    MIME_TYPE VARCHAR2(4000))
    I need to display the column blob_content.
    Thnks a lot.

    1009316 wrote:
    Hello! Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "1009316".
    When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
    With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
    So.. I have the interactive report
    table test (
    NAME NOT NULL VARCHAR2(4000)
    ID NUMBER
    BLOB_CONTENT BLOB
    MIME_TYPE VARCHAR2(4000))
    I need to display the column blob_content.This is described in the documentation: About BLOB Support in Forms and Reports and Display Image. There's an OBE tutorial that followed the introduction of declarative BLOB support in 3.1 as well.

  • I am facing a Problem with reading images from database

    Hi everybody..
    any help will be most appreciated, I am facing problem with reading images from database. I am pasting my code... 
                    string connect = "datasource = localhost; port = 3306; username = root; password = ;"; 
                    MySqlConnection conn = new MySqlConnection(connect); // creating connecting string
                    MySqlCommand sda = new MySqlCommand(@"select * from management.add_products ", conn); //creating query
                    MySqlDataReader reader; 
                    try
                        conn.Open(); // Opening Connection
                        reader = sda.ExecuteReader(); // Executing my Query..
                        while (reader.Read())
                            byte[] imgg = (byte[])(reader["Picture"]);
                            if (imgg == null)
                                pc1.Image = null;
                            else
                                MemoryStream mstream = new MemoryStream(imgg);
                                pc1.Image = System.Drawing.Image.FromStream(mstream);
    It says Parameter not Valid... i am reading all the images from database

    I agree with Viorel. You are getting the error because the format of the data is incorrect probably because the data was modify. It may not be the reading of the database the is incorrect, but the application that wrote the data into the database. You need
    to compare the imgg array data with the data before it was written to the database to see if the data matches.  I usually start by comparing the number of bytes which is easier to check then compare the actual to isolate which function is changing the
    byte count.
    An image is binary data.  The standard VS methods for reading and writing data (usually stream classes) default to ASCII encoding which will corrupt binary data.  The solution usually is to use UTF8 encoding instead of the default ascii encoding. 
    Ascii encoding with stream often aligns the data and adds extra null bytes to the end of the data which can produce these type errors.
    jdweng

  • Problems with importing images into Lightroom cc

    Problems with importing images into Lightroom cc
    I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
    Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
    Now I have left lightroom 5 and where the input port works fine.
    What happened to the upgrade from Lightroom 5 to lightroom cc?
    The camera has the latest software.

    I've now tested in various ways.
    First, I have images on both memory cards in the camera.
    Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
    Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
    I turn the camera off after a while and get the next meddelnade (picture 1)
    Which can be translated:
    "The following files were not imported because they could not read (351)
    Property 1-100
    etc. "
    Picture 1.
    Picture 2

  • Adobe Send - Problem with uploading files. When is this going to get fixed?

    When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
    I then go to Adobe Send Now and it works fine.

    The problem is the same as described in other similar threads.
    I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
    I have tried to upload the file to the site with similar results - error and the file doesn't go.
    I can go to the old SendNow site and it works flawlessly.
    If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
    Sent from my iPod

  • Why do i have a problem with accessing images in adobe muse

    why do i have a problem with accessing images in adobe muse ??????!!!!!
    i need heeeeeelp ASAP
    pleeeeease

    I am on the begining stages with constructing the web so i do not have yet URL. The problem is i can not insert any image any way. Whether by fill a browser or by place image, i have the same issue. All the images with all image's format unable to be selected and it is turned off
    I really need help plz
    Is there any info i can supply that would help you figiring out the problem ??

Maybe you are looking for