Problem with USB adapter

I have a Linksys Usb adapter to wireless connect to my Linksys router. I had been using a Netgear usb adapter but it was limited to WEP security. So I bought the Linksys G so I could go to WPA . The problem is the sometimes it doesn't want to connect. Especially if you have to re-boot a couple of times. Is there anything that can be done?

Click start >> all programs >> Linksys wireless G adapter >> click uninstall >>
Unplug the adapter >> insert the disc for the adapter >> exit out of set up wizard >> replug the adapter back >> Install only the drivers of adapter ....
See above settings helps or not ....

Similar Messages

K7N2 deltas mainboards have a problem with usb devices ??

Ok here is my problem..
I had installed WinXP Pro with SP1..
I got a 20 GB USB2.0 disk.i connected it on the both front or rear usb ports.
When i tried to transfer files to my usb disk or to my PC, in the middle of the copying, i got "Write Delay Failed" error and lost my usb connection..
I had to plug it out and in again..
Now, i have an DSL modem..Last night, i was disconnected from internet and my modem's lights gone..I plug it again, no lights..restarted my PC, also completely shutdown Windows XP..Again no lights..
Then, formatted PC and installed windows 2000 Pr and SP4, until now, my modem worked fine..But USB 2.0 ports are still no use for my usb disk...
In bios , it's enabled as USB 1.1+2.0..
I think this K7N2 deltas have a problem with usb 2.0 devices and Win XP Pro..
Some guys talking about, removing 9th wire earth, but couldn't understand which wire from where ? From mainboard or from usd device's cable ?
Those cables are fabricated, i think it's impossible ?
My processor is Athlon 2500+, ram Twinmos 512 DDR 400
Thanks for reply

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

Problem with FTP Adapter in creating a new Folder

Hi all,
I have a requirement in which a BPEL process shud create a folder named as sysdate dynamically and write a
CSV file into that.(ex: PO/2010-03-09/PO_1.csv).I created a header variable for Oubound FTP adapter and
passing the file directory as concat('PO/',xp20:current-date(),'/') to outbound header directory variable.Problem is FTP
adapter is not creating the sysdate folder its says:1.check u have privileges 2.file name is too long....Blah....Blah.
But i have all the privileges for that user.If i manually create the sysdate folder the FTP adapter is placing the CSV
file.The same works fine with file adapter...but i need to use FTP since the FTP server can change in future.Seems to
be a problem with FTP adapter....can some one help.
Iam using SOA 10.1.3.4
Regards,
Edited by: 0racler on Mar 9, 2010 4:46 AM
Edited by: 0racler on Mar 9, 2010 5:49 AM

any thoughts????

Problem with FIle Adapter

Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandra

Hi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth

Problem with Lightning Adapter after update to IOS 8.1

Dear all,
last week I updated the Iphone 5S of my wife with IOS 8.1 since that time we can not connect the B&W Bowl via lighning adapter (Original Apple).
Before never any problem. I have the new Iphone 6 but IOS 8.02 and no any problem with same adapter to connect the B&W Bowl.
I also checked in my car same problem with IOS 8.1 we can not connect but with 8.02 no problem.
I contacted the Apple support and it looks it´s a problem with the new IOS 8.1.
Does anybody have the same problems with the connection to Docking Stations etc ?
best regards
Jens

measure the speed with speedtest http://www.speedtest.net
and maybe contact your carrier

Problem with usb boot on Satellite A-50

Hi,
I've had a problem with usb boot. When I'm inserting a usb, I can't boot my computer from usb. I've selected the option boot from a disk, but doesn't runs. I have a "Satellite A-50-522". Do I need to update bios?
Greetings,

Hello,
you sould try to press F12 when the Toshiba screen appears! Then a small boot menu is shown. Choose USB-FDD and then it should work.
Bye campino

Satellite M70-190 - problem with USB

Hi!
After uninstall Windows XP and BIOS update, i have a problem with USB ports. My USB flash drive does't work. Windows find it as USB flash drive, but i can't find it in "My computer"
So have anyone idea about this problem?
PS External HDD works perfect, as USB mouse, and USB WiMax modem.
Im hoping someone out there can help with this problem.

Is described issue the same on all USB ports?
I mean, I have Satellite M70-159 in front of me and since long time I use 8GB SanDisc and 2GB Toshiba USB stick and both devices are recognized properly.
I still use original Toshiba WXP installation (updated of course).

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem with USB speed

Hi there,
I am new to MSI forum, and have some questions.
I have MSI K9NU Neo-V mainboard and have problem with USB speed . I have all the latest drivers installed and the latest BIOS for my mainboard but still have the problem that mainboard detects all USB devices like USB 1.1
MB MSI MS-7270 ver. 1 (K9NU Neo-V)
CPU AMD Athlon 4200+
VGA MSI 8600 GTS
Memory 2 x 512 MB DDR2 667 Corsair XMS matched Pair
PSU Gigabyte GE-R 460 V1
DVD-RW Pioneer DVR 112D
HDD Western Digital WD2500JS
OS Windows XP SP3 x86
Any idea about this?!
Thanks,
Alek

Quote from: Bas on 20-November-09, 21:57:20
Did you install all the drivers listed here?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=261
I also move this topic to the right area.
Yes, everything is installed and updated with latest drivers even from nVidia WEB for ULi chipset. the devices that we are talking about are USB removable storage like 8GB USB Flash Drive from Kingmax, 2GB Flash Drive from Xerox, 1 GB USB Flash drive from Kingston, USB case for 2,5" HDD from Spire ... I can count till tomorrow

MSI K8N Diamond - Boot problems with USB devices attached.

Hi There.
I have been seeking the forums, but havent found the answer to my problem yet.
This is how it goes with ANY USB devices attached to either of the four USB ports on the Motherboard.
When i turn on my system, it hangs in the POST right after displaying the BIOS version (Which I have updated to 1.6) - I cant use my Keyboard to get to the BIOS setup.
Without USB devices attached...
The system boots without problems. And in Windows XP SP2 i can insert my keyboard, mouse etc. and everything works great - both USB 1.1 & 2.0 devices.
I have disabled the KB/USB.. in BIOS and I have disabled the "Boot on other device" option as well.
As I have found on this forum, a lot of people have problems with USB Front panel and D-Bracket (USB ports) connectors causing the system to hang - But my D-Bracket (USB connectors) and my front USB port is at this time DISCONNECTED - so this cannot be the problem.
The D-Bracket shows the "Bios Sign On" information - and stops at that point
Am I having a malfunctioning Motherboard here, or are there any solutions to this problem?
Please help me as I am desperate to have my system work properly.
Regards
Stieper

Well I have read about that somewhere in here, but my problem is NOT with an USB hub, but with any USB device attached to the motherboard's USB slots. It is driving me nuts to be honest!! I think it might be time for RMA
What do you say guys - is my Motherboard ready for RMA, or do I have to try something specific berfore sending it to the retailer??

Satellite M30X: Problems with USB 2.0 external HDD

Hi,
I have a Toshiba Satellite M30X. I recently bought myself a 200GB External Hard Disc. It has its own Power supply. If I connect it with USB 2.0 to my Laptop it happens to diconnect and reconnect permanantly. Sometimes it works, then I can put Data on the Disc. Then again it diconnects and reconnects many times. I've already tried another USB Port, but there is no difference. It's very strange, because I connected the External Hard Disc to many other Computers (Laptop and Tower) and it ALWAYS works!!! Its only with my Laptop it disconnects and reconnects the whole time. As I said, not always. Sometimes it works for like an half an hour or so then the action starts again ...
Can somebody help???
Greez Lutz

Hi Andrea
I really dont know why this happen. A friend of mine has the same problem with his desktop. While copy process runs the HDD is suddenly disconnected and there is also acoustic sound when the hardware is removed.
I have connected his HDD on my Tecra and there is no problem. I really dont know what the problem can be. Maybe there is some problem with OS because I can not believe that there is some contact problem with USB ports.
If you use many different USB devices at the same time maybe there is some conflict between few different drivers. Sorry but it is not easy to give some precise explanation.

Problem with USB audio device

Hi all
I have many problem with a USB device sound, i have a plantronic headset with a usb adapter to connect on my macbook pro, I have already this problem in the past but i have found a astuce to fix this problem. Before, when i'm on teamspeak 2, 3 or other software to capture audio with my headset, after 10 minutes, the sound make noise and i have a robotic voice... Since mac OS 10.5.7 apple have change the USB audio driver. i have found on internet the previous driver and change it on mac os X but since the new mac os 10.6.5 the problem com back with the previous or the new driver audio. I don't know if other people have this problem but this is very annoying.
I have test my device on windows with boot camp many hour and nothing, no problem of distord sound or robotic voice.
PS : I'm french and my english can be bad, sorry for that.

Apparently, your previous search for audio issues in these forums missed this one: http://discussions.apple.com/message.jspa?messageID=12574650

Problem with usb devices

hi guys,
i have a problem with my usb devices.
the dmesg:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
Command line: root=/dev/sda5 vga=0x0361 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7fed0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000ce000 - 00000000000d0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fed0000 (usable)
modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
modified: 000000007fee3000 - 0000000080000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000007fed0000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fed0000 page 4k
kernel direct mapping tables up to 7fed0000 @ 10000-14000
RAMDISK: 37d42000 - 37fefc39
ACPI: RSDP 00000000000f7fe0 00024 (v02 PTLTD )
ACPI: XSDT 000000007fedab41 0008C (v01 Sony VAIO 20070418 PTL 00000000)
ACPI: FACP 000000007fee1bd2 000F4 (v03 Sony VAIO 20070418 PTL 00000001)
ACPI: DSDT 000000007fedbeeb 05C73 (v02 Sony VAIO 20070418 PTL 20050624)
ACPI: FACS 000000007fee2fc0 00040
ACPI: APIC 000000007fee1cc6 00068 (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: HPET 000000007fee1d2e 00038 (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: MCFG 000000007fee1d66 0003C (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: TCPA 000000007fee1da2 00032 (v01 Sony VAIO 20070418 PTL 00005A52)
ACPI: SLIC 000000007fee1dd4 00176 (v01 Sony VAIO 20070418 PTL 01000000)
ACPI: TMOR 000000007fee1f4a 00026 (v01 Sony VAIO 20070418 PTL 00000003)
ACPI: APIC 000000007fee1f70 00068 (v01 Sony VAIO 20070418 PTL 00000000)
ACPI: BOOT 000000007fee1fd8 00028 (v01 Sony VAIO 20070418 PTL 00000001)
ACPI: SSDT 000000007fedbc29 002C2 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb159 0025F (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb0b3 000A6 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedabcd 004E6 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 007fed0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
#3 [0037d42000 - 0037fefc39] RAMDISK ==> [0037d42000 - 0037fefc39]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [000082e000 - 000082e204] BRK ==> [000082e000 - 000082e204]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
found SMP MP-table at [ffff8800000f8010] f8010
[ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fed0
On node 0 totalpages: 523871
DMA zone: 56 pages used for memmap
DMA zone: 1682 pages reserved
DMA zone: 2245 pages, LIFO batch:0
DMA32 zone: 7108 pages used for memmap
DMA32 zone: 512780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880001010000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515025
Kernel command line: root=/dev/sda5 vga=0x0361 ro
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1994.610 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2053736k/2095936k available (3409k kernel code, 452k absent, 41160k reserved, 1239k data, 464k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.43 BogoMIPS (lpj=6648700)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3991.23 BogoMIPS (lpj=6649976)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7982.67 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: missing confirmations, switch off interrupt mode.
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404800-0xfc404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404c00-0xfc404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc404000-0xfc4047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xfc000000-0xfc003fff]
pci 0000:08:00.0: reg 18 io port: [0x6000-0x60ff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
pci 0000:09:03.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
pci 0000:09:03.0: supports D1 D2
pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:03.0: PME# disabled
pci 0000:09:03.1: reg 10 32bit mmio: [0xfc102000-0xfc1027ff]
pci 0000:09:03.1: reg 14 32bit mmio: [0xfc104000-0xfc107fff]
pci 0000:09:03.1: supports D1 D2
pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:03.1: PME# disabled
pci 0000:09:03.2: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
pci 0000:09:03.2: supports D1 D2
pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
pci 0000:09:03.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe7f has been reserved
system 00:06: ioport range 0xfe80-0xfeff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1: IO window: 0x4000-0x4fff
pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2: IO window: 0x5000-0x5fff
pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.4: IO window: 0x6000-0x6fff
pci 0000:00:1c.4: MEM window: 0xfc000000-0xfc0fffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a
pci 0000:09:03.0: IO window: 0x007000-0x0070ff
pci 0000:09:03.0: IO window: 0x007400-0x0074ff
pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff
pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0: IO window: 0x7000-0x7fff
pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc1fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
pci_bus 0000:06: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
pci_bus 0000:08: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:08: resource 1 mem: [0xfc000000-0xfc0fffff]
pci_bus 0000:09: resource 0 io: [0x7000-0x7fff]
pci_bus 0000:09: resource 1 mem: [0xfc100000-0xfc1fffff]
pci_bus 0000:09: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:09: resource 3 io: [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:0a: resource 0 io: [0x7000-0x70ff]
pci_bus 0000:0a: resource 1 io: [0x7400-0x74ff]
pci_bus 0000:0a: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:0a: resource 3 mem: [0x90000000-0x93ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 2743k freed
Simple Boot Flag at 0x36 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1249997463.944:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4017
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 8000k, total 14336k
vesafb: mode is 1280x800x32, linelength=5120, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 464k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 29
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ATA-7: FUJITSU MHV2200BT, 0000004F, max UDMA/100
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata4.00: ATAPI: MATSHITABD-MLT UJ-220V, 1.00, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM MATSHITA BD-MLT UJ-220V 1.00 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
Intel AES-NI instructions are not detected.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
udev: starting version 141
sky2 driver version 1.22
sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:08:00.0: setting latency timer to 64
sky2 0000:08:00.0: Yukon-2 FE chip revision 1
sky2 0000:08:00.0: irq 30 for MSI/MSI-X
sky2 eth0: addr 00:13:a9:c1:09:33
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
ACPI: SSDT 000000007fedb8e7 0027A (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb3b8 004AA (v01 Sony VAIO 20070418 PTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 000000007fedbb61 000C8 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb862 00085 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (58 C)
input: PC Speaker as /devices/platform/pcspkr/input/input4
sony-laptop: Sony Notebook Control Driver v0.6.
input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input5
input: Sony Vaio Jogdial as /devices/virtual/input/input6
ACPI: Invalid active0 threshold
iTCO_vendor_support: vendor-support=0
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (58 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: Battery Slot [BAT0] (battery present)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 2-3: new high speed USB device using ehci_hcd and address 3
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
usb 2-3: configuration #1 chosen from 1 choice
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009
yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
yenta_cardbus 0000:09:03.0: Socket status: 30000006
pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwl3945 0000:06:00.0: setting latency timer to 64
ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8]
tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:06:00.0: irq 31 for MSI/MSI-X
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
usb 5-1: new low speed USB device using uhci_hcd and address 2
usbcore: registered new interface driver hiddev
Linux video capture interface: v2.00
input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input11
generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1837)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
phy0: Selected rate control algorithm 'iwl-3945-rs'
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input12
generic-usb 0003:046D:C518.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input13
generic-usb 0003:046D:C518.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
fuse init (API version 7.11)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0f05760
vboxdrv: fAsync=0 offMin=0x1ae offMax=0x125c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa10a9f00
hub 2-0:1.0: unable to enumerate USB device on port 5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302564f69]
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
Clocksource tsc unstable (delta = -435934901 ns)
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
EXT3 FS on dm-0, internal journal
scsi 5:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
sd 5:0:0:0: Attached scsi generic sg2 type 0
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 10 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb-storage: device scan complete
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs: barriers enabled
kjournald2 starting: pid 1929, dev dm-1:8, commit interval 5 seconds
EXT4 FS on dm-1, internal journal on dm-1:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem dm-1 with ordered data mode
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
Adding 2449872k swap on /dev/sda6. Priority:-1 extents:1 across:2449872k
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
wlan0: authenticate with AP 00:11:6b:10:2f:bc
wlan0: authenticated
wlan0: associate with AP 00:11:6b:10:2f:bc
wlan0: RX AssocResp from 00:11:6b:10:2f:bc (capab=0x471 status=0 aid=1)
wlan0: associated
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
i think the result is, that my bluetooth and webcam isn't working...
can you help me pls.
regards nigg
Last edited by nigg (2009-08-11 14:14:57)

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

Disk Utility 13 problem with USB drives

There appears to be a problem with Disk Utility 13 (part of OS X 10.9). At least, so far as I can tell, everything traces back to this app, or possibly OS X 10.9 itself.
I recently upgraded my MacBook Air to OS X 10.9 (reformatted hard drive, installed system from scratch, updated with all the latest Apple updates). I pre-checked all my third party software to make sure it was 10.9 compatible before installing it after the system cleanup, so everything I’m running supposedly has been approved as safe for 10.9. But I’m seeing a problem formatting USB drives that I do not encounter when running under 10.8.
I have a Seagate STAA500101 (“FreeAgent GoFlex”) drive connected via Seagate’s USB3 adapter that I’ve used for some time as a Time Machine backup. Post-overhaul, I decided to erase the backup and start fresh. When I attempt to format it (single GUID partition) with Disk Utility, I see the following messages go by:
Formatting disk1s2 as Mac OS Extended (Journaled) with name Untitled 1
Could not mount disk1s2 with name (null) after erase
Then there’s a pause, and the format appears to conclude fine. But if I run a “Verify Disk” immediately, I get this:
Verifying partition map for “Seagate FreeAgent GoFlex Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Volume on disk1s2 has 0 bytes of trailing loader space and it needs 134217728 bytes
Problems were found with the partition map which might prevent booting
Error: Partition map needs repair because a data partition needs loader space.
As the drive has just been formatted, that seemed odd. I took it over to another Mac still running 10.8.5 and formatted it there — it worked just fine. Verified just fine. Took the drive back to my MacBook Air and tried to verify the disk — same failure.
I wanted to rule out bad media, so I took a Lexar 16GB USB flash drive and tried to format it with Disk Utility 13 — got the same problem.
The only success I’ve had formatting USB drives under 10.9 is to boot up into OS X Recovery. Disk Utility there formatted my Seagate drive without an error. But once I booted back into normal 10.9 operating mode, the drive once again fails to verify; it makes me leery about using it as a Time Machine backup.
I suppose it’s possible there could be some background component like Sophos causing problems when formatting drives, but if I format a drive via OS X Recovery or another Mac under 10.8, that wouldn’t explain why the drives fail to verify.
Anyone got any other observations on this issue?

Problem resolved. I'm posting this note for anyone else who might run into this situation and come across this discussion.
It actually did turn out to be Sophos -- Cloud, that is. I'd been using Sophos' free Mac antivirus software on a variety of systems but forgot that I was now testing out Sophos Cloud on my own MacBook, which is their new endpoint solution, and supposed to be compatible with OS X 10.9 (although the Mac version is listed as "beta") Sophos Cloud includes a new feature called Device Control which allows you to create a company-wide policy to control access to hardware such as USB drives, optical drives, etc. But apparently it's still pretty buggy. I had my Device Control configured with the default setting of "monitor but do not block" but it was most definitely gumming up the system. With Sophos Cloud installed, here's what happens if I try to run "Verify Disk" on any attached drive. Note on the left side how "disk2s2" shows as a sub-volume for each hard drive.
So if I uninstall Sophos Cloud, reboot and rescan, here's what I get:
Works fine. Note that the "disk2s2" subvolumes are also gone. This is the way Disk Utility also appears on a 10.8 or 10.9 system, even if you have the standard free Sophos for Mac software installed. It's only Sophos Cloud that's not playing nice. It also appears to have stopped me from being able to play DVDs from an attached Apple USB SuperDrive -- that problem was likewise solved by removing Sophos Cloud.

While charging iphone with usb adapter supplied with the phone power line gets blown up ?

While charging my IPHONE 4S with the USB adapter supplied along with iphone the power line gets blown up every time and I am left only with the option to recharge through the USB port of my laptom.Any remedy?

Have you tried other outlets? That may be an electrical problem in your house, worse case scenario. Try other USB wall adapters.

Problem with USB adapter

Similar Messages

Maybe you are looking for