Problem with usb connection on Vista

Hi all
I have LV 8.5 instaled on Vista Ultimate 32 bit. I have allso installed the NXT toolkit and the path 1_0_1.
However I have never managed to get a connectin to my NXT hardware. It does not see any NXT device when I open the NXT terminal
I'm running LV as administrator and have VISA 4.2 installed.
Is anyone having the same problems? Are there any solutions?
Thanks, Herbert

You might want to try running Windows Update. Sometimes it will find & install updated USB drivers for your onboard USB Controller. If it doesn't I would go to your motherboard or PC manufacturer's website to download & install updated device drivers. You may also want to update your sound card & video card drivers too. You might also need a BIOS update. I doubt it but it couldn't hurt to check to see if one is available.

Similar Messages

Solve Problem with USB Connection / Read this it i...

i can not load maps on my n97 mini. the error 'usb connection lost...' show on the screen in map loader but at the first day i had no problems.
i wonder why. i look for driver, ovi suite, pc suite, usb at the pc, read in the forum and many more. but nothing solve the problem. after 2 days i use accidentally the original cable which comes with the nokia n97 mini (it is a ca-101) and all my problems are gone ! bevor i use an 'old' ca-101 cabel from my n82 and i can not upload a map but the handy is shown in the pc system with all drivers and no problems. only loading big megabytes data on the handy crashes the usb connection. with the n97 mini ca-101 cabel no problem with gigabytes. i look for another ca-101 cable from the 6220 from my wife and i have the same problems (i never used bevor this cable for a connection to any handy ! it was brand new !). it seems that 'old' ca-101 cabels do not handle big data with the n97 mini. i look on the gold spring clips in the micro usb and could see that the are a little smaller and not so high in the jack in the 'old' cables. all three cables are original from nokia and not from china ! if you are also problems look on the produkt id on the plastics. if the letters are gold you have a cable like my n97 mini cable, but if the letters are black on a silver button you have an 'old' cable.
i hope i can help another with this maniac problem
greetings

I can verify this on win7 with latest PC suite.
I was using the cable that came with my 6500s as I didn't want to tackle the rats nest of wiring behind my pc.
This cable is a ca101 with silver writing on the plastic tab, made in China.
Using this cable, my 6620c would not complete a backup, it would just sit for hours on 2-4%.
Tested with the ca101 cable that came with the 6620c (gold writing, made in Thailand).
This time the backup completed in about 2 minutes.
Thank you so much for finding this, it has been driving me crazy!

Imac having problems with USB connections

My Imac keeps intermittently losing connectivity with USB devices.
Frequently, after the machine has been sleeping it fails to recognise the USB pen drive - which I tend to leave plugged in. Also, on several occasions it's lost printer connectivty. ( which is connected via USB cable)
Rebooting cures the problem but this is a complete pain!
Is there any way to force the machine to simply rescan available and connected hardware?
it's got to be ultimately embarrassing that this is something that Windows does–surely my Mac can too!

Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.

Problems with USB on Windows Vista - Satelltie A210 (PSAFGE)

Hi!
I just bought myself a new notebook - Toshiba A210 - 15Y (PSAFGE) with Windows Vista preinstalled. The problem is that the notebook doesn't want to work with any USB devices. Whether I try to use a simple USB stick, a mp3 player - he always asks for drivers. The first time I connected my mobile phone via USB it all worked.
When I tried it for the 2nd, 3rd etc. time it doesn't work. He always asks for drivers. Ok, so I installed the drivers for the phone - but the problem wasn't solved by this.
The Card-Reader is another problem - when I tried to use a SD-Card, he again asked for drivers.
Does anybody have an idea how to solve this problem?

Hi,
I'd advise you to reinstall Vista using the recovery cd that came with the laptop. Also, check in the device manager whether all the devices are installed correctly.
Come back if the problem persists, we'll think of something else.

Problems with USB connection and PC Suite

Connecting your device to the PC via USB doesn´t always work as smooth as it should. You can either use the setup´s repair function or if you are experiencing more serious problems, you need to uninstall all Nokia software form your phone and get it back on to make to work again.
This is how you do it:
Run the Nokia PC Suite setup file again and choose "repair" instead of "uninstall". This should solve some of the connectivity problems. If it didn´t work for you continue with the instructions below.
Go to Start --> Settings --> Control Panel --> Software, there you need to uninstall all Nokia software (Nokia PC Suite, Nokia Cable driver, PC Connectivity Solution ...)
Download and run Nokia PC Suite Cleaner
Reboot your computer
Download and install PC Suite here.
Connect your phone via USB cable (if possible use a different USB jack) and follow the instructions on the screen.
Now you´re set up to manage your phone with PC Suite!
For further questions ask within the board, for improvements on this article contact me.
Thanks to users scoobyman, cricfancy and shuntfield for their collaboration.
Message Edited by illinjah on 16-Aug-2009 07:02 PM
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Hi pudu
thanks for the reply!
so sad, that doesn't work for me. the same with Nokia_PC_Suite_6_84_10_3_eng_us_web.exe
I have widcomm stack for bluetooth, there are lot of concerns about this,
but I do not understand why it cannot be connected via USB, too. Oh, no, it is connected, but that makes no sense

K7N2 deltas mainboards have a problem with usb devices ??

Ok here is my problem..
I had installed WinXP Pro with SP1..
I got a 20 GB USB2.0 disk.i connected it on the both front or rear usb ports.
When i tried to transfer files to my usb disk or to my PC, in the middle of the copying, i got "Write Delay Failed" error and lost my usb connection..
I had to plug it out and in again..
Now, i have an DSL modem..Last night, i was disconnected from internet and my modem's lights gone..I plug it again, no lights..restarted my PC, also completely shutdown Windows XP..Again no lights..
Then, formatted PC and installed windows 2000 Pr and SP4, until now, my modem worked fine..But USB 2.0 ports are still no use for my usb disk...
In bios , it's enabled as USB 1.1+2.0..
I think this K7N2 deltas have a problem with usb 2.0 devices and Win XP Pro..
Some guys talking about, removing 9th wire earth, but couldn't understand which wire from where ? From mainboard or from usd device's cable ?
Those cables are fabricated, i think it's impossible ?
My processor is Athlon 2500+, ram Twinmos 512 DDR 400
Thanks for reply

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

Satellite M30X: Problems with USB 2.0 external HDD

Hi,
I have a Toshiba Satellite M30X. I recently bought myself a 200GB External Hard Disc. It has its own Power supply. If I connect it with USB 2.0 to my Laptop it happens to diconnect and reconnect permanantly. Sometimes it works, then I can put Data on the Disc. Then again it diconnects and reconnects many times. I've already tried another USB Port, but there is no difference. It's very strange, because I connected the External Hard Disc to many other Computers (Laptop and Tower) and it ALWAYS works!!! Its only with my Laptop it disconnects and reconnects the whole time. As I said, not always. Sometimes it works for like an half an hour or so then the action starts again ...
Can somebody help???
Greez Lutz

Hi Andrea
I really dont know why this happen. A friend of mine has the same problem with his desktop. While copy process runs the HDD is suddenly disconnected and there is also acoustic sound when the hardware is removed.
I have connected his HDD on my Tecra and there is no problem. I really dont know what the problem can be. Maybe there is some problem with OS because I can not believe that there is some contact problem with USB ports.
If you use many different USB devices at the same time maybe there is some conflict between few different drivers. Sorry but it is not easy to give some precise explanation.

Problem with JCo Connection Pool

Hi,
I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.

Hello,
You need to increase the pool size via Visual Administrator.
Server 0 -> Services -> JCO RFC Connections.
Change the pool size from there. I believe a restart is in order.
Regards,
Jan

Problems with ipod connection.

Problems with ipod connection.
I have problems to connect my ipod to computer windows 7.
When I connect I get the following error:
"We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
And it recognizes the ipod when trying to go play music or videos make me the following error:
"Error while trying to copy on disk. The device is not connected."
I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
What else can I do?

Hello,
While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.

Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

Morning Gjakleinmark,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

Problems with Document Connect

I have a problem with Document Connect. I am unable access office live workspace.
I have been on the help line with microsoft but they were unable to help.
Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?

I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?

Problem with usb boot on Satellite A-50

Hi,
I've had a problem with usb boot. When I'm inserting a usb, I can't boot my computer from usb. I've selected the option boot from a disk, but doesn't runs. I have a "Satellite A-50-522". Do I need to update bios?
Greetings,

Hello,
you sould try to press F12 when the Toshiba screen appears! Then a small boot menu is shown. Choose USB-FDD and then it should work.
Bye campino

Problem with usb connection on Vista

Similar Messages

Maybe you are looking for