Problem with USB/External-HDD/etc... not writing?

Hello...
Recently I've been having a problem with my USB, and external harddrive. It seems that for some reason when I copy files to the device, they do not write. If I go and view the device contents on another PC, my files aren't there, but on this PC they are.
The only way that they will copy is if I right click and select "Safely Remove Drive."
I never used to have to do this; Is there a way to make files auto write?
Thanks in advance,
Stephen

Hi, you need to use -sync mount option.

Similar Messages

A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and 1TB IOMEGA
any one have a solution? anyone dealt with this problem in the apple care program?

You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem with USB External Hard Disk Drive

I have similar problem with hard disk MK6025GAS in Sweex casing connected via USB as Raistlfiren in this post but I am not sure if it has something to do with kernel. The problem is that when I plug the hard disk via USB it is not even shown with in /dev/ or by fdisk -l. I had similar problems with the drive before but it was always shown in /dev.
I got same output from dmesg as Raistlfiren in the post before
# dmesg | tail
sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
Info fld=0x0
I was browsing net for a lot of time to find a solution but nothing helped a lot. The problem is closes to the one described on Gentoo Forum
I can see that it is recognized by computer since it is shown with lsusb
# lsusb
Bus 001 Device 005: ID 13fd:0540 Initio Corporation
# lsusb -d 13fd:0540 -v
Bus 001 Device 005: ID 13fd:0540 Initio Corporation
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13fd Initio Corporation
idProduct 0x0540
bcdDevice 0.00
iManufacturer 1 Initio
iProduct 2 MK6025GAS
iSerial 3 0010100500000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
From the beginning I though and I still think that the partition table is screwed up but the programs like TestDisk and fixdisktable work only with disks shown in /dev/
Additionally, I have checked the content of /var/log/kernel.log
Sep 16 22:03:58 hramat kernel: usb 1-2: new high speed USB device using ehci_hcd and address 5
Sep 16 22:03:58 hramat kernel: usb 1-2: configuration #1 chosen from 1 choice
Sep 16 22:03:58 hramat kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Sep 16 22:03:58 hramat kernel: usb-storage: device found at 5
Sep 16 22:03:58 hramat kernel: usb-storage: waiting for device to settle before scanning
Sep 16 22:04:03 hramat kernel: scsi 4:0:0:0: Direct-Access Initio MK6025GAS 2.23 PQ: 0 ANSI: 0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
Sep 16 22:04:03 hramat kernel: usb-storage: device scan complete
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Write Protect is off
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Mode Sense: 86 0b 00 02
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sdd:<6>sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
Sep 16 22:04:03 hramat kernel: Info fld=0x0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
and /var/log/errors.log
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
Sep 16 22:07:35 hramat kernel: INFO: task async/0:3957 blocked for more than 120 seconds.
Sep 16 22:07:35 hramat kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
The only thing I understand from these logs is that the disk is blocked, therefore not listed in /dev.
Assuming the newer kernel problems I could try to use some older live linux CD to see if that would work. I am also thinking of connecting this hard drive directly to my laptop, using live linux CD and maybe check the output of hdparm. Is there anything else I could check or try?
Thank you for any help or suggestions
Matej

Thank you nTia89 for response. Sorry for not providing enough information.
I believe the problem is not system dependent. I have dual boot with windows and there the disk has also problems. However, I do have Arch32 with Kernel 2.6.30, using Gnome. hal and dbus are also running.
I did not tried to connect the disk to the computer directly, I will try it today.
Yesterday I have used SystemRescueCD 0.4.1 with Kernel 2.6.22. I wanted to see if it will be recognized by the system and placed in /dev/. Yes it was. This means that the problem highlighted in Gentoo forum can be true, but it doesn't solve my problem. I have tried to connect the drive several times to Arch and it was not shown in /dev/sd*, in SystemRescueCD it was placed as /dev/sdb. Now I am sure that the partition table is screwed up.
So I have started to play with the drive in SystemRescueCD with TestDisk and FixDiskTable but without success.
% fdisk -l
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1530 12289693+ 7 HPFS/NTFS
/dev/sda2 1531 6672 41303115 7 HPFS/NTFS
/dev/sda3 6673 12161 44090392+ f W95 Ext'd (LBA)
/dev/sda5 * 6673 11908 42058138+ 83 Linux
/dev/sda6 11909 12161 2032191 82 Linux swap / Solaris
Disk /dev/sdb: 60.0 GB, 60011642880 bytes
64 heads, 32 sectors/track, 57231 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Disk /dev/sdb doesn't contain a valid partition table
Manufacturer disk geometry: Heads: 16; Cylinders: 16383; Sectors: 63; Logical Blocks (LBA): 117210240
TestDisk found only Linux partitions with 43Gb while disk had only one 60Gb partitioned with FAT32/NTFS.
Also recognized 64 heads, 57231 cylinders and 32 sectors (same as from fdisk -l), which obviously differs from manufacturer disk geometry.
testdisk.log:
Thu Sep 17 19:09:26 2009
Command line: TestDisk
TestDisk 6.8, Data Recovery Utility, August 2007
Christophe GRENIER
Linux version (ext2fs lib: 1.40.2, ntfs lib: 9:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: none)
Using locale 'C'.
Hard disk list
Disk /dev/sda - 100 GB / 93 GiB - CHS 12161 255 63, sector size=512
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32, sector size=512
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
Interface Advanced
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Computes LBA from CHS for Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Allow partial last cylinder : Yes
search_vista_part: 1
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : Yes
search_vista_part: 1
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
NTFS at 8956/63/32
heads/cylinder 255 (NTFS) != 64 (HD)
sect/track 63 (NTFS) != 32 (HD)
filesystem size 24579387
sectors_per_cluster 8
mft_lcn 1024141
mftmirr_lcn 1650676
clusters_per_mft_record -10
clusters_per_index_record 1
NTFS part_offset=9392094720, part_size=12584646144, sector_size=512
NTFS partition cannot be added (part_offset<part_size).
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34129 1 1 75201 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=69896224, size=84116272, end=154012495, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34632 2 1 75704 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=70926400, size=84116272, end=155042671, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34668 0 1 75740 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71000064, size=84116272, end=155116335, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34673 1 1 75745 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71010336, size=84116272, end=155126607, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34699 2 1 75771 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71063616, size=84116272, end=155179887, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 34708 2 1 75780 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=71082048, size=84116272, end=155198319, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36338 0 1 77410 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74420224, size=84116272, end=158536495, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36367 0 1 77439 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74479616, size=84116272, end=158595887, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36401 2 1 77473 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74549312, size=84116272, end=158665583, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 36414 2 1 77486 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=74575936, size=84116272, end=158692207, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37949 1 1 79021 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77719584, size=84116272, end=161835855, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37955 1 1 79027 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77731872, size=84116272, end=161848143, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 37989 1 1 79061 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=77801504, size=84116272, end=161917775, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 38404 0 1 79476 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=78651392, size=84116272, end=162767663, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 39636 2 1 80708 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=81174592, size=84116272, end=165290863, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41263 1 1 82335 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=84506656, size=84116272, end=168622927, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41266 1 1 82338 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=84512800, size=84116272, end=168629071, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 41660 0 1 82732 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=85319680, size=84116272, end=169435951, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 42898 0 1 83970 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=87855104, size=84116272, end=171971375, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 43244 1 1 84316 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=88563744, size=84116272, end=172680015, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 44870 2 1 85942 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=91893824, size=84116272, end=176010095, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 44930 2 1 86002 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=92016704, size=84116272, end=176132975, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 46961 0 1 88033 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=96176128, size=84116272, end=180292399, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 47312 0 1 88384 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=96894976, size=84116272, end=181011247, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 48393 2 1 89465 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=99108928, size=84116272, end=183225199, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 49633 2 1 90705 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=101648448, size=84116272, end=185764719, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 50767 1 1 91839 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=103970848, size=84116272, end=188087119, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 51150 1 1 92222 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=104755232, size=84116272, end=188871503, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 51941 1 1 93013 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=106375200, size=84116272, end=190491471, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 52759 0 1 93831 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=108050432, size=84116272, end=192166703, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 53069 1 1 94141 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=108685344, size=84116272, end=192801615, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 53768 0 1 94840 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=110116864, size=84116272, end=194233135, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54287 0 1 95359 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=111179776, size=84116272, end=195296047, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54493 2 1 95565 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=111601728, size=84116272, end=195717999, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54861 1 1 95933 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112355360, size=84116272, end=196471631, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54890 2 1 95962 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112414784, size=84116272, end=196531055, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 54953 2 1 96025 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=112543808, size=84116272, end=196660079, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 56330 1 1 97402 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=115363872, size=84116272, end=199480143, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 56334 0 1 97406 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=115372032, size=84116272, end=199488303, disk end=117211136)
recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
recover_EXT2: boot_sector=0, s_blocksize=4096
recover_EXT2: s_blocks_count 10514534
recover_EXT2: part_size 84116272
D Linux 57203 0 1 98275 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
This partition ends after the disk limits. (start=117151744, size=84116272, end=201268015, disk end=117211136)
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (60 GB / 55 GiB) seems too small! (< 103 GB / 95 GiB)
The following partitions can't be recovered:
D Linux 34129 1 1 75201 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34632 2 1 75704 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34668 0 1 75740 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34673 1 1 75745 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34699 2 1 75771 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 34708 2 1 75780 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36338 0 1 77410 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36367 0 1 77439 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36401 2 1 77473 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 36414 2 1 77486 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37949 1 1 79021 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37955 1 1 79027 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 37989 1 1 79061 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 38404 0 1 79476 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 39636 2 1 80708 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41263 1 1 82335 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41266 1 1 82338 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 41660 0 1 82732 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 42898 0 1 83970 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 43244 1 1 84316 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 44870 2 1 85942 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 44930 2 1 86002 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 46961 0 1 88033 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 47312 0 1 88384 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 48393 2 1 89465 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 49633 2 1 90705 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 50767 1 1 91839 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 51150 1 1 92222 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 51941 1 1 93013 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 52759 0 1 93831 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 53069 1 1 94141 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 53768 0 1 94840 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54287 0 1 95359 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54493 2 1 95565 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54861 1 1 95933 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54890 2 1 95962 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 54953 2 1 96025 27 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 56330 1 1 97402 26 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 56334 0 1 97406 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
D Linux 57203 0 1 98275 25 16 84116272
EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
Results
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
Interface Advanced
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
Disk /dev/sdb - 60 GB / 55 GiB
Partition table type: Intel
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
New options :
Dump : No
Cylinder boundary : Yes
Allow partial last cylinder : No
Expert mode : No
Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Current partition structure:
Partition sector doesn't have the endmark 0xAA55
Ask the user for vista mode
Allow partial last cylinder : No
search_vista_part: 0
search_part()
Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
Search for partition aborted
Results
Can't open backup.log file: No such file or directory
interface_load
interface_write()
No partition found or selected for recovery
simulate write!
write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition
TestDisk exited normally.
fixdisktable first output:
% ./fixdisktable -d /dev/sdb
Getting hard disk geometry
cylinders=57231, heads=64, sectors=32
end_offset: 2147482624
FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
EXT2 partition at offset 56832, length=(41072.398 MB) 43067531264
Sectors: start= 111, end= 84116382, length= 84116272
Hd,Sec,Cyl: start(3,16,0) end(28,31,41072)
Done searching for partitions.
Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
1 80 3 16 0 63 32 1023 111 84116273 83 (Interpretted)
1 80 3 16 0 63 224 255 111 84116273 83 (RAW)
1: 8003 1000 833f e0ff 6f00 0000 3183 0305
2: 0000 0000 0000 0000 0000 0000 0000 0000
3: 0000 0000 0000 0000 0000 0000 0000 0000
4: 0000 0000 0000 0000 0000 0000 0000 0000
Do you wish to write this partition table to disk (yes/no)? no
fixdisktable second output:
% ./fixdisktable -d -r -v /dev/sdb
Getting hard disk geometry
cylinders=57231, heads=64, sectors=32
end_offset: 2147482624
FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
NTFS partition at offset 17483776, length=(17592186043512.582 MB) 184467440727622 49216
Sectors: start= 34148, end=36028797017147916, length=36028797017113768
Hd,Sec,Cyl: start(43,5,16) end(16,12,2096265)
Done searching for partitions.
Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
1 80 43 5 16 63 32 1023 34148 -1850199 07 (Interpretted)
1 80 43 5 16 63 224 255 34148 -1850199 07 (RAW)
1: 802b 0510 073f e0ff 6485 0000 a9c4 e3ff
2: 0000 0000 0000 0000 0000 0000 0000 0000
3: 0000 0000 0000 0000 0000 0000 0000 0000
4: 0000 0000 0000 0000 0000 0000 0000 0000
Do you wish to write this partition table to disk (yes/no)? no
This string "FfEeSsNnBbUu" was repeating there for longer time and it was most probably related to debugging or a verbose mode of fixdisktable
As I have mentioned I will try to connect the disk directly to the computer and see what will happen.
Shall I try to correct the disk geometry to the one specified by manufacturer? Is it possible?
Any suggestions?

Problems with seagate external hdd

I have a Seagate 3TB external HDD attached to my iMac via a Firewire 800 cable. I have the latest software running (Yosemite 10.10.3) but the Mac no longer shows the HDD in finder, I can see it in disk utility but when i come to verify or repair the disk i get this message
" Error: Partition map check failed because no slices were found" I also get this message:
Verifying volume “Seagate External Drive”Verifying file system.Checking Journaled HFS Plus volume.Invalid B-tree node sizeThe volume Seagate External Drive could not be verified completely.File system check exit code is 8.Error: This disk needs to be repaired. Click Repair Disk.
The drive is nearly full and I really don't want to lose any files, can anyone help please..

Hi Brian
Connect the External HD directly up to one of the iMac's and follow the Formatting and Partitioning instructions in Ken's article: (but note that doing so will erase the data on the drive)
Ken Stone's article: http://www.kenstone.net/fcphomepage/partitioningtiger.html
It's sounding more like your trouble is with network sharing than format, if so have a look
at: http://support.apple.com/kb/HT1549
and: http://db.tidbits.com/article/9261
Dennis

Problems with 1TB external HDD

I have two external HDD, one a LaCie 2TB and one a Maxtor Basics 1.5TB. Both devices come formatted as FAT32. I have tried reformatting using Disk Utility to Mac OS Extended but the process fails on both devices, whichever of my iMac I use. The only thing I can then do is re-partition them as FAT32 again.
Equally frustrating, the devices are not visible when I try to access them from other machines on the network whereas other drives connected to the same machine are fully visible.
Is there a size limit for formatting using Mac OS Extended or something?
Any suggestions of how I might at least get them visible for sharing across the network - even if they have to stay as FAT32 drives?

Hi Brian
Connect the External HD directly up to one of the iMac's and follow the Formatting and Partitioning instructions in Ken's article: (but note that doing so will erase the data on the drive)
Ken Stone's article: http://www.kenstone.net/fcphomepage/partitioningtiger.html
It's sounding more like your trouble is with network sharing than format, if so have a look
at: http://support.apple.com/kb/HT1549
and: http://db.tidbits.com/article/9261
Dennis

Problems with my External HDD. Loosing space?

I am new to Mac.
I just bought a new iMac, and a 2 TB WD My Passport external HDD where I am backing up all my files collected from previous works done under Windows.
In the 2 TB HDD I have created 3 folders: one has 546 GB, another has 200 GB, and the third 0,2 GB (200 MB).
So the total should be something like 800 GB, and therefore the available space in the HDD should be in the range of 1,2 TB.
But when I look in Properties, it tells me that the Used space is 1,3 TB, and that the Available Space is 0,7 TB.
How can this be?
I have looked into another articles and all of them say that I should not have to Defrag (I had that doubt because I copied info into the HDD and then I deleted it, and so it could be marked as used).
So, if that is not the case, what can be happening?
What should I do to recover the rest of the space?
Thanks

You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.

Problems with usb / sd removable devices (not/badly copying)

Hi everybody
the problem is when I plug an usb stick or a SD card, all with FAT32 fs, GNOME (I use gnome-shell) asks me if I want to mount and open the device.
so, it loads properly and when it's open I can do all the things you are supposed to do with them.
The issue first appaired when I copied some pics to an SD card. It appaired the progress bar saying it completed the copy process.
So I umounted the device and removed it. Some other people said that actually there weren't any files in the SD card.
Supposing it was bad/corrupted fs I formatted the card and put back the images there. Same issue. I was starting to think the SD card was damaged
until I had the same problem while copying music to my phone (via USB cable).
I noticed it created all the files but didn't store any actual data (e.g. size of files was always 0 byte) or even didn't do anything (neither created the file) sometimes.
Searching the web I found that it wasn't syncing - so they told me to do the sync command on the shell - nothing solved.
So as I read on the wiki [fstab], I mounted the devices with options "sync,flush", which in fact solved the problem.
[Actually I later found that it works even without the flush option, just with the sync option]
Doing so I solved the problem and could copy all the data to the devices.
What I want to know is: how can I say to GNOME (or anyother GNOME uses to mount devices) "well, whenever I put a removable device, mount it with the sync option" ?
thank you in advance,
azzka
PS: [not so important]: I noticed very slow copying bitrate, and I did what the wiki says about but didn't solve anything. Any ideas?

Yep HV,
Verify the discs in the disc utility and see if that works. It'll probably take an hour or so cos the disc utility's performance has been less than favorable.
Try this: Turn off the computer, disconnect the drives, then restart the computer. Now, re-connect the drives while the computer is running, let them mount and see if you can eject them. One would assume it is a permissions issue, however, with the multitude of glitches appearing with ext drives and USB devices in Leopard it's hard to assume anything.
Persevere!

Problem with defaultCommand - buttons, links, etc not working

Hi,
I've used the defaultCommand attribute on a number of pages in an application, and have noticed a serious problem :
After hitting enter, if no navigation occurs (i.e. only PPR), nothing on the page works anymore - no buttons, links, etc.
Is this a known issue? If so, is there a way to fix this?
Also, if an inputTextField has a f:validateLongRange tag, and the user enters an invalid value (i.e. text, or something out of range), when enter is pressed the entire page disappears, and I'm left with only the validator's error message. I know I could work around this by performing my own validation, but that is less than ideal.
Any help would be greatly appreciated. Thanks
Message was edited by:
lturner

Hi,
it does reproduce and I filed a bug. The work around is not to use the "defaultCommand" property as it works when e.g clicking onto the button
Frank

Problems with USB external drive attached to time capsule

Hi,
I bought a WD 1 TB my book as a supplemental backup drive, as I've pretty much maxed out the space in my 500 GB TC with backups form two macbooks. It's attached to the TC via the USB 2.0. For the first few months everything worked fine. Now suddenly neither machine can access the WD drive. It shows up in the Aiport utility but not in the finder. When I plug it directly into one of the macbooks it accesses fine, but I bought it specifically to use as additional network backup drive.
Where have I gone wrong? I updated the firmware for the WD drive, and everything appears fine on the TC and the macbooks. I poked around on the forums and found many a complaint about the WD drives, but I couldn't find a solution to my particular problem.
Any ideas?
Thanks.

The first thing to try is a nice long power cycle of the network if you have not already done this.
Power everything down, order is not important. Wait 5-10 minutes.
Start the modem first and let it run 4-5 minutes by itself. Then start the next device connected to the modem the same way. Keep powering up each device the same way until all devices are powered on.
Any help?
If no luck, the next thing to try is connect the WD drive directly to your computer and "Verify Disk" using Disk Utility.
Applications > Utilities > Disk Utility
Then click "Repair disk"
If indicated, "Repair Permissions" on the disk.
Eject the disk and then you'll have to do the power cycle all over again and plug the device back into the USB port on the Time Capsule.

Format/cross-compatibility problems with Seagate External HDD

I recently bought a MacBook Pro (July 08) and as soon as I took it out of the box and set it up, went to plug in my little 120GB Seagate HDD to dump the files onto my new Mac, and received the query "Do you wish to format HDD?" Of course I clicked 'NO', and ejected the drive from the Mac. I went to plug it back into my old PC (where it had worked moments before) and received the same query as on the Mac, plus, when I went into properties, found that the drive was no longer FAT32 but RAW. I now find myself at wit's end trying to rescue the 4 years' of data on the drive. I have tried running disk utility on Mac where it can see it still as FAT32, but can't mount it or repair it, and it's still in RAW format when connected to PCs. Anybody out there with some ideas?
Thanks!

I'm not a hardware expert, but Seagate had a major HD firmware issue earlier this year:
http://www.macintouch.com/readerreports/harddrives/topic3441.html#d17jan2009

Problems with an external hard drive (not Time Machine related)

First, I'll clarify that I'm using an internal hard drive inside an external enclosure, incase that makes a difference to my problem.
I got this drive to store my music on, since I've run out of room on my main hard drive. I've transfered all my music to it, and it's been working fine, but now it seems that any program that tries to access files on the drive will freeze. Whether it's trying to play a song in iTunes or copying files from one drive to another. And when iTunes freezes from this, a simple Force Quit wont work. The window closes, and I can no longer access the program, but it still appears open on the dock and prevents me from being able to shut down the computer properly.
I've tried running Disk Warrior on the drive, but that didn't seem to do the trick. Does anybody have any ideas?
Thank you

Nope, that didn't help, unfortunately.
Also, I'll add that now the drive doesn't show up on the desktop all the time (sometimes I'll have to unplug/replug it, turn off/on the drive, or restart the whole computer to get it to show up).

Satellite M30X: Problems with USB 2.0 external HDD

Hi,
I have a Toshiba Satellite M30X. I recently bought myself a 200GB External Hard Disc. It has its own Power supply. If I connect it with USB 2.0 to my Laptop it happens to diconnect and reconnect permanantly. Sometimes it works, then I can put Data on the Disc. Then again it diconnects and reconnects many times. I've already tried another USB Port, but there is no difference. It's very strange, because I connected the External Hard Disc to many other Computers (Laptop and Tower) and it ALWAYS works!!! Its only with my Laptop it disconnects and reconnects the whole time. As I said, not always. Sometimes it works for like an half an hour or so then the action starts again ...
Can somebody help???
Greez Lutz

Hi Andrea
I really dont know why this happen. A friend of mine has the same problem with his desktop. While copy process runs the HDD is suddenly disconnected and there is also acoustic sound when the hardware is removed.
I have connected his HDD on my Tecra and there is no problem. I really dont know what the problem can be. Maybe there is some problem with OS because I can not believe that there is some contact problem with USB ports.
If you use many different USB devices at the same time maybe there is some conflict between few different drivers. Sorry but it is not easy to give some precise explanation.

Automount of SD card & USB external HDD with strange KDE pop up msg

Today I reviewed lots of threads posted over the last year and some bug reports too about this issue, but it's happening for me too. Both SD card and USB external HDD have autodetectable filesystems on them because I can mount them by hand with "mount /dev/mmcblk0p1 /mnt" and "mount /dev/sdb1 /mnt". But it would be nice if I didn't have to do that.
Although I didn't notice which explicit install that I did pulled them in as dependencies, I do have udisk2 and polkit installed. Also installed udiskie as a wrapper. I've been mounting these volumes by hand before now because I feel like I'm still learning the ropes of The Arch Way and guessed (apparently incorrectly) that mounting volumes by hand was just part of "The Arch Way". But based on some threads here and some bug reports, I guess this used to work in Arch but has been causing some problems for some people lately when they upgrade. I just installed Arch for the first time (using the 2015.02.01 iso image), so I don't have any background to go on.
So what is The Arch Way for automounting external drives? I've skimmed the wiki article for this and because "Development of udisks has ceased in favor of udisks2." it seems that udisks2 is preferred. But it got installed and the daemon is running for me. The user is in the wheel group. dbus is running (though like one person who filed a bug, I too have several instances of dbus in my ps -aux output and I'm not sure if that is as it should be or not). I've done no special configuration ("not wittingly" anyway; I promise, my name is not James Clapper) that I think would have affected this.
So for a newb with no special preference, how should automounting be configured in a new Arch system? In other words, what should be my first steps in trying to solve this problem for myself? I know there are lots of different ways to skin this cat, but I'd prefer the simplest and most elegant solution that does not depend on KDE or GNOME or other unnecessary tools. I've just (with this Arch system I just installed) begun using i3wm and I think I'll be sticking with it. That said, however, it's clear that I inadvertently/unwittingly managed to get some elements of KDE into memory as the following http://gamonics.org/img/2015-02-26-1731 … _scrot.png shows. This popped up both times, when I plugged in my SD card and when I plugged in my USB drive. Any thoughts on what's going on here? I did install okular explicitly because I think it's one of the best PDF viewers, but I don't understand why KDE is reporting anything to me when I'm running i3 and insert an SD card or a USB disk.
And in the terminal, I get this output (apparently from udiskie):
[root@archippocrates archie]# Failed to show notification: The connection is closed
not adding /org/freedesktop/UDisks/devices/mmcblk0: unhandled device
mounted /org/freedesktop/UDisks/devices/mmcblk0p1 on /media/3532-3338
Failed to show notification: The connection is closed
Although the volume does get mounted automatically.
Thanks for any thoughts.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by Gamonics (2015-02-27 00:25:01)

I personally can't answer the question of "simplest and most elegant" way of mounting devices. It all depends on what you want. If you expect more exotic functionality, say correct unmounting of devices if they were disconnected during a sleep cycle, there's probably no way around udisks2. For that you get a complex piece of software prone to... unexpected behaviour. Mind you some of it is related to front-ends like GVFS.
As to your KDE issues, last I checked mount handling was disabled by default there, but you can control it manually (see man kcmshell4). Though I haven't followed up on KDE 5 developments. If going with udisks2, I'd recommend using devmon from the udevil package as a front-end (more details on the wiki udisks page).
PS: multiple dbus instances are expected, check the user names and specified arguments in the ps output.
edit: grammar. :X
Last edited by Alad (2015-02-27 17:03:31)

USB External HDD Enclosure with a 500GB HDD!!

Hi All,
I was just wondering if anyone has come across using a 3rd party USB external HDD enclosure with a hard drive (mine is 500GB HDD). What I am trying to do is to format the HDD so both PC and MAC can use it but it will be mainly connected to my iMAC. I have tried by using PC to format the HDD to NTFS but MAC will not show the HDD on the desktop when I plug the USB to the back of the iMAC.
I have done some researches and it seems the only way to do make this possibe is to format it into FAT32. So I have tried to use FDisk to make the partition but it doesn't seems to support anything bigger than 120GB, now I am really stuck. If anyone knows any quick and painless solution, please spare me some advice.
Headache!!
Dave
iMAC 20" Core2 Duo 2.16 1GB Mac OS X (10.4.9) Mac OS X (10.4.9)

Windows can use, but not format, large FAT32 partitions. Microsoft wants to discourage using FAT32 for portable storage (for marketing reasons).
The solution is to use Mac's Disk Utility to format the disk as FAT32 (misnamed MS-DOS in Disk Utility). The disk will then be read/write by both Mac and PC.
Also, it's worth pointing out that you can read and write NTFS disks using MacFUSE with the NTFS-3G plugin. Albeit, this is very awkward to do unless you've got some UNIX shell experience.

Problem with USB/External-HDD/etc... not writing?

Similar Messages

Maybe you are looking for