Problem with USB modem

I have just bought a macbook with mac os X tiger. I have a problem with network configuration when I'd like to setup my broadband. I'm now using Tiscali broadband which supplied me a USB modem (Sagem Fast 800). I've already installed the software and driver. The problem appeared when I tried to configured the network setting. I couldn't find "external modem" or "ethernet adaptor" as the manual suggests. As a result, I couldn't make any interent connection. It'd be so grateful if anyone who's using tiscali broadband can kindly give me the solution for this.

Hi,
Thanks a lot for your reply. I've looked in the network port configurations and found "Airport", "Bluetooth", "Biult-in Ethernet" and "Built-in Firewire". All of these are checked but I can't see the "external modem" port. I also rebooted the conputer after installing the software and driver. There is a software "ADSL Monitor" shown up in my desktop but can't see the device in the network configurations.

Similar Messages

Power management problem with USB modem

I now use a MS-6743 (i865G) board. My previous board was MS-6533, it did not have USB v2.0.
The problem is my Aztech (originally Smartlink) USB modem prevents the system going into standby mode but this should be a USB 2.0 issue because I'm using the same driver for the modem like previous mainboard config. I could go into standby mode flawlessly with my old board.
Furthermore I'm using USB keyboard, mouse but no power management property dialog box appear for those devices. So I'm pretty sure the problem is because of USB 2.0. Is there a way to come around this issue? Thanks in advance...

To pin point whether or not IRQs conflicts is to be blamed, please kindly post your IRQs conflicts for us to verify.
A signature of your system setup will proves greater help for others to advice you with more accurate directions and benefits you in the future.
Please read this Moan Guide too.

Problem with USB Modem (Apple)

Hello,
I have a MacBookPro and a recently purchased the Apple USB External Modem. When I connect to the computer once I get a sign that reads:
Incompatible. You can not use an Apple USB External Modem on this computer.
Please, I am overwhelmed with this, anyone can tell me what happens??
Thanks, and sorry for my English.

The Apple USB modem requires Mac OS X v10.4.3 through Mac OS X v10.6.8 running in 32 bit mode. This modem has been discontinued.

Problem with USB modem in OS Yosemite

Hi, I am using HUAWEI E173Bu-1 mobile broadband USB modem, after installing OS Yosemite in my mac book pro it was not working properly. Even it doesn't show the signal of the network provider. Anyone faced similar problems and solved the same pls help..

Have you checked the manufacturer's web site for an update?

K7N2 deltas mainboards have a problem with usb devices ??

Ok here is my problem..
I had installed WinXP Pro with SP1..
I got a 20 GB USB2.0 disk.i connected it on the both front or rear usb ports.
When i tried to transfer files to my usb disk or to my PC, in the middle of the copying, i got "Write Delay Failed" error and lost my usb connection..
I had to plug it out and in again..
Now, i have an DSL modem..Last night, i was disconnected from internet and my modem's lights gone..I plug it again, no lights..restarted my PC, also completely shutdown Windows XP..Again no lights..
Then, formatted PC and installed windows 2000 Pr and SP4, until now, my modem worked fine..But USB 2.0 ports are still no use for my usb disk...
In bios , it's enabled as USB 1.1+2.0..
I think this K7N2 deltas have a problem with usb 2.0 devices and Win XP Pro..
Some guys talking about, removing 9th wire earth, but couldn't understand which wire from where ? From mainboard or from usd device's cable ?
Those cables are fabricated, i think it's impossible ?
My processor is Athlon 2500+, ram Twinmos 512 DDR 400
Thanks for reply

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

Satellite M70-190 - problem with USB

Hi!
After uninstall Windows XP and BIOS update, i have a problem with USB ports. My USB flash drive does't work. Windows find it as USB flash drive, but i can't find it in "My computer"
So have anyone idea about this problem?
PS External HDD works perfect, as USB mouse, and USB WiMax modem.
Im hoping someone out there can help with this problem.

Is described issue the same on all USB ports?
I mean, I have Satellite M70-159 in front of me and since long time I use 8GB SanDisc and 2GB Toshiba USB stick and both devices are recognized properly.
I still use original Toshiba WXP installation (updated of course).

Problem with usb boot on Satellite A-50

Hi,
I've had a problem with usb boot. When I'm inserting a usb, I can't boot my computer from usb. I've selected the option boot from a disk, but doesn't runs. I have a "Satellite A-50-522". Do I need to update bios?
Greetings,

Hello,
you sould try to press F12 when the Toshiba screen appears! Then a small boot menu is shown. Choose USB-FDD and then it should work.
Bye campino

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem with USB speed

Hi there,
I am new to MSI forum, and have some questions.
I have MSI K9NU Neo-V mainboard and have problem with USB speed . I have all the latest drivers installed and the latest BIOS for my mainboard but still have the problem that mainboard detects all USB devices like USB 1.1
MB MSI MS-7270 ver. 1 (K9NU Neo-V)
CPU AMD Athlon 4200+
VGA MSI 8600 GTS
Memory 2 x 512 MB DDR2 667 Corsair XMS matched Pair
PSU Gigabyte GE-R 460 V1
DVD-RW Pioneer DVR 112D
HDD Western Digital WD2500JS
OS Windows XP SP3 x86
Any idea about this?!
Thanks,
Alek

Quote from: Bas on 20-November-09, 21:57:20
Did you install all the drivers listed here?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=261
I also move this topic to the right area.
Yes, everything is installed and updated with latest drivers even from nVidia WEB for ULi chipset. the devices that we are talking about are USB removable storage like 8GB USB Flash Drive from Kingmax, 2GB Flash Drive from Xerox, 1 GB USB Flash drive from Kingston, USB case for 2,5" HDD from Spire ... I can count till tomorrow

MSI K8N Diamond - Boot problems with USB devices attached.

Hi There.
I have been seeking the forums, but havent found the answer to my problem yet.
This is how it goes with ANY USB devices attached to either of the four USB ports on the Motherboard.
When i turn on my system, it hangs in the POST right after displaying the BIOS version (Which I have updated to 1.6) - I cant use my Keyboard to get to the BIOS setup.
Without USB devices attached...
The system boots without problems. And in Windows XP SP2 i can insert my keyboard, mouse etc. and everything works great - both USB 1.1 & 2.0 devices.
I have disabled the KB/USB.. in BIOS and I have disabled the "Boot on other device" option as well.
As I have found on this forum, a lot of people have problems with USB Front panel and D-Bracket (USB ports) connectors causing the system to hang - But my D-Bracket (USB connectors) and my front USB port is at this time DISCONNECTED - so this cannot be the problem.
The D-Bracket shows the "Bios Sign On" information - and stops at that point
Am I having a malfunctioning Motherboard here, or are there any solutions to this problem?
Please help me as I am desperate to have my system work properly.
Regards
Stieper

Well I have read about that somewhere in here, but my problem is NOT with an USB hub, but with any USB device attached to the motherboard's USB slots. It is driving me nuts to be honest!! I think it might be time for RMA
What do you say guys - is my Motherboard ready for RMA, or do I have to try something specific berfore sending it to the retailer??

3000 J - Problem with Internal Modem

Hello,
I still live in the 90's and use dial-up service to access the internet. My computer isn't recognizing (or there is a problem with) my modem. I receive "Error 797" when trying to dial-up as I usually do.
The modem is HSF2014 56K Data Fax Modem. Is there a way to obtain the driver software from Lenovo on CD-ROM, so I can try reinstalling?
Thanks in advance!
Ryan

Hi again,
It's difficult for me to offer anymore than generalized advice but I'll try to be helpful.
I'd start by removing the existing modem and restarting the computer. One of the error messages mentioned PCI Slot 1. This is probably the modem. If ALL the error messages go away it's a pretty good indication that the modem is the problem and replacement is in order. I would attempt simply re-seating the modem in it's slot first however and restarting.
I'm pretty sure that the proper drivers would be found automatically for the existing modem. If not, there's a rather generalized Readme file and a program called HXFSetup.exe which is probably the program you would need to run if required.
While you're in the computer, disconnecting and reconnecting things might be better than just a visual inspection. Twisting the cooling fan housing on the CPU with moderate force shouldn't hurt anything and who knows?
If it turns out that the modem is the problem (which I doubt), installing the other modem shouldn't be a problem, assuming it fits and you have the drivers for it. Again, good luck.
Jim
P.S. If you haven't already done so, Google all the error messages and see if there seems to be any common element. There are diagnostic programs available on the web but I've never found one that helped me with a trouble, perhaps someone has and can make a recommendation.

Satellite M30X: Problems with USB 2.0 external HDD

Hi,
I have a Toshiba Satellite M30X. I recently bought myself a 200GB External Hard Disc. It has its own Power supply. If I connect it with USB 2.0 to my Laptop it happens to diconnect and reconnect permanantly. Sometimes it works, then I can put Data on the Disc. Then again it diconnects and reconnects many times. I've already tried another USB Port, but there is no difference. It's very strange, because I connected the External Hard Disc to many other Computers (Laptop and Tower) and it ALWAYS works!!! Its only with my Laptop it disconnects and reconnects the whole time. As I said, not always. Sometimes it works for like an half an hour or so then the action starts again ...
Can somebody help???
Greez Lutz

Hi Andrea
I really dont know why this happen. A friend of mine has the same problem with his desktop. While copy process runs the HDD is suddenly disconnected and there is also acoustic sound when the hardware is removed.
I have connected his HDD on my Tecra and there is no problem. I really dont know what the problem can be. Maybe there is some problem with OS because I can not believe that there is some contact problem with USB ports.
If you use many different USB devices at the same time maybe there is some conflict between few different drivers. Sorry but it is not easy to give some precise explanation.

Sharing problems with usb FAX/modem in lion server

Hi !
I Have a small LAN with three iMac and a mac mini running lion server (and used like a file server).
I need to send and receive a few fax each month, ad yI bought a USR5637 (it work with Lion).
It works almost perfectly with Lion but:
1) Lion server doesn't send a mail (to the indicated adress) when a fax is arrived. Do I need to set an account in mail.app ?
2) I can send a fax only from the mac mini server. I have shared the fax printer, but in the LAN clients with installed the shared printer/FAX, it doesn't work !
I need the fax, can someone hel me ?
Thanks.
Aldo

The server system works so leave that alone.
On your client machine try this. My system sees the Zoom as 'USB Modem @ servername'
Delete the entry for your zoom modem from Printers and Scanners. It probably reads something like USB Modem @ servername.
Add your modem again. Instead of Selecting USB Modem @ servername from the list, choose Add other printer or scanner. In the Add Printer dialog box select USB Modem @ servername. Type a new name in the name box. This time use only letters numbers and dashes. Don't use spaces or special characters. It appears that the spaces or special characters is causing the error. On my computer I entered modem-servername.
If this works for you be sure to enter a defect report at apple.

MS6340 v3.0B with USB Modem?

Hi all,
I have a MS-6340 Ver3.0 B Mainboard and I'm thinking about to buy a USB modem. However, I've heard that USB modems can cause problems with Athlon or the VIA chipset. Does anyone have the same board with a USB modem. Does it work ok or should I buy an ethernet modem?
Regards )
Ron

Hi,
I would buy an ethernet modem in any case, as they don't use the CPU as much as the USB modems do...
They are more stable too, so in any case it's a better buy...

Problems with USB port and song transferring;

Hi! I just got an iPod and I am having problems with it. My computer doesn't have a Hi-Speed USB port, even if it's 9 months old. Some of my friends don't have it either but they still are able to transfer songs onto their iPod. For mine, it keeps saying "Do Not Disconnect." I waited for 5 hours last time I got it and it still isn't working.
I also updated my iPod software today and the iPod icon isn't appearing on the bar to the left in iTunes. I'd really appreciate any help on this! As well as if I really need to do something about the ports or if it could function like this normally.

Quote from: Svet on 08-December-10, 00:48:07
Install chipset drivers from MSI web:
http://eu.msi.com/index.php?func=driverfile&dno=2427&i=0
+
NEC USB 3.0 Drivers:
http://eu.msi.com/index.php?func=driverfile&dno=11189&i=0
are these the same driver provided with the disc driver? as i already installed both of these..

Problem with USB modem

Similar Messages

Maybe you are looking for