Problem with USB on K7T 226 Pro2

I've read the manual through a couple times and it says that with the PC to PC USB network thing, plug it into JUSB 2. But the connector on the actual part only has 9 holes, the empty one it says to align with pin #2 isn't a hole...
Basically I can't figure out whether I read something wrong in the manual or there's some trick to plugging something with 9 holes into something with 10 pins.

Just wanted to clarify a bit...
I got the bracket for the PC to PC networking and the manual says there should be a row with three pins and then one with five on JUSB2. But mine has a full complement of 10 and the connector won't fit, because that one hole is plugged, so it just won't fit. I don't have the skills required to attach a different connector, what should I do?

Similar Messages

K7N2 deltas mainboards have a problem with usb devices ??

Ok here is my problem..
I had installed WinXP Pro with SP1..
I got a 20 GB USB2.0 disk.i connected it on the both front or rear usb ports.
When i tried to transfer files to my usb disk or to my PC, in the middle of the copying, i got "Write Delay Failed" error and lost my usb connection..
I had to plug it out and in again..
Now, i have an DSL modem..Last night, i was disconnected from internet and my modem's lights gone..I plug it again, no lights..restarted my PC, also completely shutdown Windows XP..Again no lights..
Then, formatted PC and installed windows 2000 Pr and SP4, until now, my modem worked fine..But USB 2.0 ports are still no use for my usb disk...
In bios , it's enabled as USB 1.1+2.0..
I think this K7N2 deltas have a problem with usb 2.0 devices and Win XP Pro..
Some guys talking about, removing 9th wire earth, but couldn't understand which wire from where ? From mainboard or from usd device's cable ?
Those cables are fabricated, i think it's impossible ?
My processor is Athlon 2500+, ram Twinmos 512 DDR 400
Thanks for reply

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

Problem with usb boot on Satellite A-50

Hi,
I've had a problem with usb boot. When I'm inserting a usb, I can't boot my computer from usb. I've selected the option boot from a disk, but doesn't runs. I have a "Satellite A-50-522". Do I need to update bios?
Greetings,

Hello,
you sould try to press F12 when the Toshiba screen appears! Then a small boot menu is shown. Choose USB-FDD and then it should work.
Bye campino

Satellite M70-190 - problem with USB

Hi!
After uninstall Windows XP and BIOS update, i have a problem with USB ports. My USB flash drive does't work. Windows find it as USB flash drive, but i can't find it in "My computer"
So have anyone idea about this problem?
PS External HDD works perfect, as USB mouse, and USB WiMax modem.
Im hoping someone out there can help with this problem.

Is described issue the same on all USB ports?
I mean, I have Satellite M70-159 in front of me and since long time I use 8GB SanDisc and 2GB Toshiba USB stick and both devices are recognized properly.
I still use original Toshiba WXP installation (updated of course).

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Problem with USB speed

Hi there,
I am new to MSI forum, and have some questions.
I have MSI K9NU Neo-V mainboard and have problem with USB speed . I have all the latest drivers installed and the latest BIOS for my mainboard but still have the problem that mainboard detects all USB devices like USB 1.1
MB MSI MS-7270 ver. 1 (K9NU Neo-V)
CPU AMD Athlon 4200+
VGA MSI 8600 GTS
Memory 2 x 512 MB DDR2 667 Corsair XMS matched Pair
PSU Gigabyte GE-R 460 V1
DVD-RW Pioneer DVR 112D
HDD Western Digital WD2500JS
OS Windows XP SP3 x86
Any idea about this?!
Thanks,
Alek

Quote from: Bas on 20-November-09, 21:57:20
Did you install all the drivers listed here?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=261
I also move this topic to the right area.
Yes, everything is installed and updated with latest drivers even from nVidia WEB for ULi chipset. the devices that we are talking about are USB removable storage like 8GB USB Flash Drive from Kingmax, 2GB Flash Drive from Xerox, 1 GB USB Flash drive from Kingston, USB case for 2,5" HDD from Spire ... I can count till tomorrow

MSI K8N Diamond - Boot problems with USB devices attached.

Hi There.
I have been seeking the forums, but havent found the answer to my problem yet.
This is how it goes with ANY USB devices attached to either of the four USB ports on the Motherboard.
When i turn on my system, it hangs in the POST right after displaying the BIOS version (Which I have updated to 1.6) - I cant use my Keyboard to get to the BIOS setup.
Without USB devices attached...
The system boots without problems. And in Windows XP SP2 i can insert my keyboard, mouse etc. and everything works great - both USB 1.1 & 2.0 devices.
I have disabled the KB/USB.. in BIOS and I have disabled the "Boot on other device" option as well.
As I have found on this forum, a lot of people have problems with USB Front panel and D-Bracket (USB ports) connectors causing the system to hang - But my D-Bracket (USB connectors) and my front USB port is at this time DISCONNECTED - so this cannot be the problem.
The D-Bracket shows the "Bios Sign On" information - and stops at that point
Am I having a malfunctioning Motherboard here, or are there any solutions to this problem?
Please help me as I am desperate to have my system work properly.
Regards
Stieper

Well I have read about that somewhere in here, but my problem is NOT with an USB hub, but with any USB device attached to the motherboard's USB slots. It is driving me nuts to be honest!! I think it might be time for RMA
What do you say guys - is my Motherboard ready for RMA, or do I have to try something specific berfore sending it to the retailer??

Satellite M30X: Problems with USB 2.0 external HDD

Hi,
I have a Toshiba Satellite M30X. I recently bought myself a 200GB External Hard Disc. It has its own Power supply. If I connect it with USB 2.0 to my Laptop it happens to diconnect and reconnect permanantly. Sometimes it works, then I can put Data on the Disc. Then again it diconnects and reconnects many times. I've already tried another USB Port, but there is no difference. It's very strange, because I connected the External Hard Disc to many other Computers (Laptop and Tower) and it ALWAYS works!!! Its only with my Laptop it disconnects and reconnects the whole time. As I said, not always. Sometimes it works for like an half an hour or so then the action starts again ...
Can somebody help???
Greez Lutz

Hi Andrea
I really dont know why this happen. A friend of mine has the same problem with his desktop. While copy process runs the HDD is suddenly disconnected and there is also acoustic sound when the hardware is removed.
I have connected his HDD on my Tecra and there is no problem. I really dont know what the problem can be. Maybe there is some problem with OS because I can not believe that there is some contact problem with USB ports.
If you use many different USB devices at the same time maybe there is some conflict between few different drivers. Sorry but it is not easy to give some precise explanation.

Problems with USB port and song transferring;

Hi! I just got an iPod and I am having problems with it. My computer doesn't have a Hi-Speed USB port, even if it's 9 months old. Some of my friends don't have it either but they still are able to transfer songs onto their iPod. For mine, it keeps saying "Do Not Disconnect." I waited for 5 hours last time I got it and it still isn't working.
I also updated my iPod software today and the iPod icon isn't appearing on the bar to the left in iTunes. I'd really appreciate any help on this! As well as if I really need to do something about the ports or if it could function like this normally.

Quote from: Svet on 08-December-10, 00:48:07
Install chipset drivers from MSI web:
http://eu.msi.com/index.php?func=driverfile&dno=2427&i=0
+
NEC USB 3.0 Drivers:
http://eu.msi.com/index.php?func=driverfile&dno=11189&i=0
are these the same driver provided with the disc driver? as i already installed both of these..

Lenovo 3000 n200 problem with usb tv-stick

hi guys,
i have a problem with my lenovo 3000 and the hvr-900 usb tv-stick from hauppauge. driver installation and software installation from wintv is no problem. finding the channels ist also no problem. sound is good but i have no pictures... the display ist black.
my grafik chip is the intel GMA X3100 onboard. i thought it was a problem with the overlay function. the wintv software shows me "surface vmr" on my old desktop with the old wintv pci card it shows me "surface overlay".
internet tv (tvu, tv ants...) works without any difficulties. but i can`t find a function to activate "overlay".
has anyone an idea? thanks for helping.

i try an older usb machine from hauppauge which supports analog only (the new stick supports analog/digital) and... it works... the wintv software shows me "surface overlay"... crazy...
now i use this until i find a solution for the stick ;-)
thanks for helping

Is there a known problem with USB microphones?

Background
OS X 10.5.8
Premiere Elements 9
Hardware Intel iMac
I use a USB mic with all my audio applications.
However, it appears that PrE doesn't see the mic for narration. I've set up the audio hardware preferences to use the Default System Input/Output but no recognition of the mic.
The mic works fine on all my other applications and is selected in system preferences to be the input of choice, and tests indicate it is recognized.
I changed the audio hardware selection in PrE to use the built in mic and it works as expected.
So I'm led to wonder if there is a problem with using a USB mic?
The documentation, referencing windows only, mentions plugging in a microphone to the microphone socket on the PC, not mention of a USB mic?
Any pointers to where I might find a solution?
Thanks

Thanks Neale, in particular for posting the images:
nealeh wrote:
To use my USB microphone (built in to my webcam) I go to Preferences> Audio Hardware and select "Premiere Elements Windows Sound" as the Default Device.
Then click ASIO settings and ensure your microphone is selected.
I believe I'm making a similar selection
I've tried all the selections. The built in system works but my external mic, when selected in system preferences as the default, is not recognized.

If you're having problems with USB ports, read on...

i'm reading that alot of people on here are having problems with their front (or top) usb on their cases not working with their k7n2 boards. i have come across the correct solution to this problem in one of the posts (after having solved the problem on my own), however noone has posted the solution by itself on this forum so everyone can easily see it.
The trick is to make sure that pin 10 (at least on a K7n2 delta-L), the pin labeled USBOC (USB Open Connection), is wired to NOTHING. If the connector to your front usb ports is fused into one giant connector and it HAS a wire that will connect to this pin (labeled GND2 or Shield or something), CUT THAT WIRE. Pin 10 on JUSB2 (at least on a K7n2 delta-L) must be OPEN. If this pin IS connected to something (even if it is only GND), the motherboard will think something is connected to this usb port and you will get many unknown devices listed in your windows device manager and the rest of your usb ports may or may not work.
As a general rule of thumb, if a pin on a motherboard is labeled OC for "Open Connection" and you wire something to it, you're asking for trouble.
If you cannot understand this you should not be attempting to wire a motherboard in the first place.
Here is a picture to go along with this discussion. If you cannot see this picture, I am sorry for it has probably been removed from the place I posted it online as I cannot attach pictures physically to this post. If someone here has a way to permanently host this picture and post it to this thread permanently, that would be wonderful.
In summary: all usb ports/headers have only four pins associated with it (VCC, USB+, USB-, GND). If the connector (whether it's one big connector or individual sockets) to your front/top usb port has 5 sockets, don't connect the 5th socket to anything. That goes for any case/motherboard combination. This is what i'm talking about above. I have no idea why motherboard and case manufacturers have a 5th pin involved in any way on either the pin or socket side. It is not used for usb.
EDIT: I just noticed this has already been discussed in the trouble shooting guide in the above sticky post. oh well, now we have a pretty picture to go along with it (i hope).

:-D)Hello guys,
as promised I come back here to give the results of my tests... and I have to say that you saved my day (even if I had to open back 60 secured cases).
So the solution was the right one, when I unplugged the "ground" end of the front USB connector cable from the USBOC pin, those connectors finally worked as expected with USB 2.0 compliant devices.
So thank you really much for this very usefull information !
And even if maybe it's not only MSI's fault, I still believe that more information on those connectors in the user's manual would be really usefull (who knows what USBOC means except a few people and who could imagine that pluggin on it a "ground" cable would make it unserviceable ??). And who ever saw a user's manual bundled with a case ?? it's pretty unusual
Hope that someone at MSI will read that and take it into consideration, not for me (because now I'm aware) but for the thousands other consumers that will feel a little bit "annoyed" with that issue. I don't think that adding one line about it in user's manuals would be so much expensive
But I'm quite lucky myself... being able to understand and write english (even if I still have some progress to do ) gave me the possibility to find the solution... but a lot of my french fellows can't do that... and there's no french forum here... How can they do ? They rely on user's manual
Best regards,
Nicolas

Zen vision:m chargin problem with USB ca

I've got vision:m for months , and during this time I used to charge with USB cable , and didn't have any problem , but it doesn't charged earlier , actually I hooked it up to my USB last night , and there was blinking icon up to today , but no any progress . so I use its original cable(electricity) and?it's going to charge?.Should I going to warranty company for this problem(doesn't chargin with USB) ?thanks for sharing your mind ( and pardon for my english )?Message Edited by MTahmasebi on 2-3-200604:5 PM

KRe: Zen Vision M Firmware Problem!!! Can't deal with this thing any more..._
menios wrote:
So you say that I actually have the Windows Media Player 0, because my Zen is being recognised..
I have rebooted it several times but its just the same thing...it shows firmware problem!!
Why isn't this player working?I've seen many people, not only from here, who have the same exact problem and they gave up on their mp3... I dont have this kind of luxury to buy a new one!!I don't know whether Creative has put on this a "time bomb" or is just faulty, but I really wish it could be saved..
I'm saying it is WMP0 because the firmware file sees the player. The computer can recognize it but with WMP components that firmware file would be grayed-out..So when you reloaded the firmware did you choose "reload firmware" Before you connected it's?(That is what erases the firmware prior to uploading the firmware. If you did not do that it could cause it to fail.Do these ste
ps.
Open the firmware file,On the player format>cleanup>choose reload firmware, then connect & run the firmware file.

Problem with USB audio device

Hi all
I have many problem with a USB device sound, i have a plantronic headset with a usb adapter to connect on my macbook pro, I have already this problem in the past but i have found a astuce to fix this problem. Before, when i'm on teamspeak 2, 3 or other software to capture audio with my headset, after 10 minutes, the sound make noise and i have a robotic voice... Since mac OS 10.5.7 apple have change the USB audio driver. i have found on internet the previous driver and change it on mac os X but since the new mac os 10.6.5 the problem com back with the previous or the new driver audio. I don't know if other people have this problem but this is very annoying.
I have test my device on windows with boot camp many hour and nothing, no problem of distord sound or robotic voice.
PS : I'm french and my english can be bad, sorry for that.

Apparently, your previous search for audio issues in these forums missed this one: http://discussions.apple.com/message.jspa?messageID=12574650

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

Problem with USB on K7T 226 Pro2

Similar Messages

Maybe you are looking for