Problem with Usernames and Workgroupmanager after update to 10.6.4

After the update to SLS 10.6.4 i can´t delete Users in the Workgroupmanager. The login in the Wiki is also out of order: some Usernames will be accepted - some not: "Martin Fuermoos" will be rejected - only the shortname "martinfurmoos" is OK.
????

I am having the same issue.
The issue has effectively crippled our staff who depend heavily upon WIKI for SOP's and Core Business Processes.
Key Symptoms:
1. Some users can log in with 2nd short name; however, several users report that they can only login using their primary short name. --!! We use FirstnameLastname as primary and Firstname.Lastname as 2nd short name. All users are in the habit of using second short name. !! --
2. Some users who can only login using primary shortname no longer have permission to access core work group wiki pages.

Similar Messages

Sync problems with 3gs and itunes after update iOS 5.0

I am using a Vista PC with iTunes10.5. After updating my 3gs to iOS 5.0 I am not able to sync the phone. iTunes recognizes my iphone and then stays syncing at the backup stage....I deleted all my apps on the phone and deleted previous backups and tried syncing again, but in vain. I am clueless....

I just plugged it into my netbook and its Restoring it on there so thanks, I know I will lose what I never had backed up but just be happy if it works. Fingers crossed this fixes it.
Edit: It didnt work, come up with iTunes isnt connected to the internet then the restore fails

Lenovo VIBE Z2 Pro problems with hearing and camera after updating to android Lolipop

Hello All,
After updating to Android Lolipop three days ago, on my phone occured some problems.
1. The hearing while calling/receiving a call is very low, when the volume is on max. It was extremly high on max volume before the update.
2. Now when I'm using the camera most of the pictures are captured with low quality and not well focused. Around one out of four pictures comes out with good quality and well focused. But I reviewed the settings and tried do switch them all the ways around but the problem still occurs.
Any help will be appreciated! Hopefully the next update will fix these issues.
Regards,
Sava

gvdkolk wrote:
Hello Guru,
One question:
Since I went to VIBEU_V2.0_1448_ST_K920_CMCC my phone is not connacting to the 3g network.
Just edge. I refreshed apn restart the phone, no result.
Is this a result of the update?
Thanks in advance,
Ger
Hi Ger
The Chinese K920 version is meant to be sold and used only in China with a certain local carrier/provider(That's why it's got the ''China Mobile'' logo on the back).The main difference between the Chinese and the international K920 version is the GSM receiver(hardware difference)....
.....It seams there is a partial workaround(To make the Chinese version more ''internationally 3G/4G friendly'') but my experience with the Chinese K920 is limited and in this case it would be better to ask the actual users->
Check out THIS THREAD .
I can't help you much on this one....Sorry.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem with printing and scanning after updating to Mavericks for my Photosmart C7180

After updating my macbook pro (mid 2009) to Mavericks, I have found that I can only scan to a jpeg2000 and cannot scan as a tiff or jpeg or anyother format. I have followed instructions on troubleshooting and have not been able to make anything work ie scanning from preview etc. I have now uninstalled all the HP software and tried to load it again but software update will not recognise that I do not have the software for my printer. What do I do now?

Hello Cyd23, welcome to the forums!
I understand you're having issues with scanning since you upgraded to Mavericks. I have looked into this concern for you and found that there is no downloadable driver with the full feature software (scanning software) included for the Photosmart C7180 and Mavericks.
However, there are work around options for scanning that may help and work!
Please see this link for the other methods: OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
I hope that helps!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I am facing problem with wifi and cellular after update Apple iOS 8.0.2

How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

Hi Hanjon!
Here is an article that will help you troubleshoot these purchased apps:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

Ask your question in an iPAD forum.
This is the OS X Mountain Lion forum.

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Problems with ethernet and wifi after 10.5.8

In school we log online through a system where a window appears in Safari (or other web browser) where you write in your username and password. Same is for Ethernet and Wifi. After update 10.5.8, this system no longer works. Only logo of the service provider appears but the boxes for username and password are missing.
Everything works with my old iBook G4.
Any ideas?

My son is at school in the USA and he is reporting the same problem getting onto his university network. His new MacBook is getting the 'self-assigned IP' message with DHCP. This is not a good start to the school year.

How to sign in? (problem with username and/or password)

I created an account long ago for the Support Communities with an Apple ID: xxx.mac.com.
I created an account not so long ago for iTunes with an Apple ID: xxx.gmail.com.
Where they suppost to be the same? Wasn't sure. In any event, I've been using them both without a hitch. Then I realized that I could have a password recovery problem with my Support Communities account because I haven't had the xxx.mac.com email address for several years now.
Problem: When I use my older Apple ID for Support Communities, it will not allow me to change my email to my current xxx.gmail.com address. I suspect it recognizes the address is already being used with me newer Apple ID for iTunes. My solution was to simply ditch the older ID and try signing in with my newer ID. Unfortunately with that route, I get:
"We're sorry. Your account could not be created due to system issues. Please contact Apple Support Communities with the information below to create your account." [Which I've done, but no response.]
Questions: Are the ID support to be the same or different? Either way, it doesn't really matter to me, but I either need to update my address for the older ID or be able to use my newer ID in Support Communities. Because of this, I'm unable to use any type of email notification and I'm afraid I could have a problem with password recovery if I were in that position.
Thanks for any comments.

Problem solved and completely my error.
My login with the old Apple Discussions was [email protected] At some point, with the new Apple Support Communities, some time ago, I was prombed to create a new account and I did so. My username was simply "xxx" without the "@mac.com".
So that was the problem. My old [email protected] still had my old address. I kept logging in with this ID and kept trying to update my address. Where I thought it was recognizing that this address was already used with my iTunes account, it was because it was used with my newer Support Communities ID (xxx) that I didn't even remember I had created.
Turned out it was something so simple. (I hate when that happens.) I had to play my "idiot card".
Thanks to Apple support for the direct email correspondence that finally got me on the right track.

Problem with mail for exchange after update on E72...

Hi everyone,
I updated Nokia E-mail to ver 3.9 on E72. Now I am facing a problem with mail for exchange. I have configured gmail on mail for exchange. I recieve a warning that "unable to sync contact administrator if problem persist". It started to pop up just after the update was over and is very frustrating. Even previously i used to recieve mails instantly but now it generally takes half an hour for me to recieve them. I deleted and created mail for exchange several times but to no avail.
Also i am not able to automatically recieve mails other emails which i have configured. every time I have to manually download them everytime.
Can anybody suggest a way out.
Thanks
Anil

It could be a problem if you're using your network's connections...
I was on a Pay & Go tariff with o2 some time ago, and needed secure connections for various things, o2 told me they didn't provide secure connections on Pay & Go tariffs...
Could be worth checking with them to make sure it's supported.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Iphone 3g sync problems with itunes 9.2 after updating on another computer

Hello
I have an old mac which will not allow me to update itunes to 10.x. So I have been updating my iphone via another computer (which apple support to itunes 10.x) and my old mac has been able to see it still and therefore I have been able to backup/update it.
However after updating to ios 4.2, my old mac has not been able to sync to it and itunes tell me that I have to update to itunes 10.1 (which I cannot).
Last time I updated, I had to restore my iphone due to various problems (mainly to do with itunes 9.2 allowing me to download the unsupported ios 4.1). I didn't have to restore this time and this maybe what has caused me the problems. Does anyone know whether I can solve my problem of syncing to itunes 9.2 by restoring my iphone and reinstalling ios4.2? Or is ios 4.2 not supported by itunes 9.2 at all and now I need a new computer?
Sorry, I originally posted this in the wrong section.
Cheers for the help

Yes, I had the same problem this time and had email communication with Apple about it when ios 4.1 came out. Apple have made it so 10.4.11 is not supported by itunes 10.1, and so stuck with itunes 9.2.1.
When I had this problem, I decided to update on another computer (as I did this last time). But I didn't have the same problems as before (requiring a restore of my iphone) which I suspect solved the problem I have now.
However, if the restore doesn't solve this, then I have an iphone without any music on it! Or any of the apps as well.

Problem with username and password

I've been trying to set up a new back up from scratch, and after losing my network and wifi connection, I just about have it all working again.
I have wireless connection, and I have the TC appearing correctly in Airport Utility, green light, reporting no issues, and seemingly ready to go.
It shows up correctly when I select disk in TM's system preferences, and it shows up and connects OK i n Finder, under shared items.
However, when I try to initiate a backup, its reporting a problem with the username and password, even though I'm entering the correct password.
I've checked it in the keychain, changed it in AU to be sure etc, and when I enter a wrong password, it just tells me its the wrong password, rather than this longer message explaining there's a problem with the username or password.
So I guess it could be with the username, but not sure what that might be - any ideas?
The only thing I can think of is that the name appears as Time Capsule b7e45c in AU, but as Iain MacDonald's Time Capsule on Time Capsule b7e45c in TM's system prefs.
Message was edited by: Iain MacDonald1

Exactly the same here...error 107 is reported when I try to back up.
There are 4 computers sharing the time capsule and only one of them reports this error.
Is there a way to remove the sparsebundle and start again for this computer without having to lose all the others?

Problem with Usernames and Workgroupmanager after update to 10.6.4

Similar Messages

Maybe you are looking for