Problem with using iPhoto and Preview

I needed to resize a picture in iphoto. I opened it in Preview and resized it. At the top of the Preview window, where the file name is, I wanted to rename it so it would be easier to find. It let me do that. I closed the picture. When I went to open it in iphoto, the thumbnail is there, but when I double click on the thumbnail, the exclamation mark appears. I cannot open it in Preview either. It says the size is 0. It also still shows the original filename. I can't find the picture in Finder, using either the original or new name. From what I've found online, it seems I've changed the pathway. I can't find anything to rename/change it back. Help!!!! (I repeated the process with a picture I didn't care about. Somehow I changed the name back and am able to open it again in iphoto. I can't for the life of me remember what I did!!!! Both pictures, with the original filename and the new one are in Preview, but I can't open the one with the new name.)
(If renaming the picture means you can't access it anymore, why is that a feature?)

Are you using the same User Account as before?
Does anything here help"
http://www.apple.com/support/ilife/tutorials/iphoto/ip1-3.html

Similar Messages

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

Problems with iCAL,iPHOTO and Windows XP (using parrallells) after Leopard

I installed Leopard and now iCAL won't publish to the web. When you try to access it from the web it says the page can't be located... that the calendar may have been deleted or renamed. No body at Mac can figure it out so far.
I also can no longer open iPHOTO or any applications in Windows XP which I run from Parralells. This is a new issue that just occurred 3 days after the intial installation of Leopard.

Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
Message was edited by: limo79

Anyone having this problem when using iPhoto and iMovie?

I've posted this question in the iMovie forum without much luck. I hope someone here may have some ideas.
I make iMovies that are largely composed of still photos. Recently I'm having trouble with the preview screen in iMovie. When I click on a photo in the media browser it will not show up in the Preview pane but the little scrubber runs across the bottom anyway. If I click "apply" the photo will import into the iMovie timeline and I can then see it in the preview pane...sometimes. Sometimes not. It is the erratic nature of this problem that is driving me buggy (pardon the pun).
Sometimes the picture will do exactly what it supposed to -- pop up in Preview and I can make adjustments. Other times, no. Sometimes it is pictures right next to one another -- one works the other doesn't.
Is anyone else having a problem like this. My thought now is that it may be related to the size of the library since the problem seems to be on large libraries whereas projects that I do with 100 pictures or so (in a seperate project library) don't give me any grief but my large travel libraries do.
Thanks.
iMac G5 Mac OS X (10.4.8) iLife '06

Another possibility might be the color profile bug that was introduced with iPhoto 6.0.5 and, maybe, Quicktime 7.1.3. It's a long shot but if Terence's suggestion doesn't help you can try the following:
1 - download the "Embed sRGB Profile" Automator application from Toad's Cellar.
2 - unzip it and drop the files that are giving you problems onto it.
3 - import those newly embedded files into iPhoto and see if they work.
As I said it's a long shot but worth a try if other attempts fail.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

"short-term memory loss": problems with iTunes, iPhoto, and others

Recurring problems been frustrated with for several weeks, likely related in some way:
1. iTunes (10) keeps asking for me to agree to license agreement every time it boots up.
2. iPhoto (8.1.2) and Keynote (5.0.5) and iMovie (8.0.5) repeatedly give Start-up launch screen even though I click not to see it. iPhoto repeatedly asking me if I want to GPS my pictures.
3. Google Earth stopped working.
4. Skype also keeps asking me to agree to license agreement upon every launch.
4. Skype upgrade (going from 2.8 to 5) runs and goes through all the way to relaunch but old version still there and no v. 5 to be seen.
5. Adobe Acrobat repeatedly asking for log-in agreement too.
HELP!
I have already reset PRAM and SMC.

Sorry for the length, got carried away trying to touch on main points.
Okay, 2006 model, which came out Aug 2006-7.
Heat. Good idea to run SmcFanControl 2.x to run default rpm 800-900 instead of too slow 500-600. Heat really harms those extra hot FBDIMM RAM chips.
You need to boot from another hard drive to repair your boot drive.
I would not go with DU and trust its verify. Alsoft Disk Warrior.
You probably have a dying OEM Nvidia 7300GT or ATI X1900 that clogs itself with dust (poor air chamber design) and has to be pulled and cleaned 3-4x a year. There is even a recall-exchange program for some of the ATI X1900s, based on card serial number.
Upgrades almost never do fix problems with hardware except once in awhile where graphic card drivers can always use some help.
At the least, to repair your drive, boot from SL DVD and "Utility Menu => Disk Utility" until you have OS X installed on a small 30GB "emergency Mac" volume (from which to run DU but also Disk Warrior).
I am not a fan of upgrading the OS to a new version. Format a new drive, and even actually new drives can ship with bad sectors. Think they don't? it would cost much more and longer to test even 1TB drive. And format a drive with Disk Utility from the new OS with Disk Utility, not older version.
I would do a +clean install+ of 10.6 to another hard drive and fully update that and test things out. Then, clone/backup that with SuperDuper (safety net) and install software (10.6 upgrade editions that are compatible only).
You may have something left in your system or installed that is corrupt, not compatible. Even a bad USB cable or device.
Then import (Migrate) or hand copy your home account from backup (data is usually fine, thinking of /account/Library/ items.
Creating a new user account can also be helpful to test a system, but first do a clean install so you know you are only using Apple OS.

Problem with CSS styles and Previewing in Firefox

Hello,
I recently rebooted my Mac OS X system (leopard) and reinstalled Adobe CS3. Before this I had virtually no problems with Dreamweaver and everything was running smoothly. However, now whenever I preview my pages in Safari, the CSS code is completely mangled.
Also, my site won't preview in Firefox unless I close any existing tabs and exit Firefox completely. I have no idea why these problems are occurring, but I have pasted the code below so any advice would be extemely helpful.
---------------------------------html----------------------------------------
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv= "Content-Type" content="text/html; charset= UTF-8" />
<title>armed and harmless</title>
<link href="untitled.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
    <div id="nav">
    </div>
</div>
</body>
</html>
-----------------------------------css-----------------------------------
@charset "UTF-8";
    background-color: #000000;
    background-image: url(images/header.jpg);
    background-repeat: no-repeat;
    margin: 0px;
#wrapper {
    height: 800px;
    width: 1000px;
    margin-top: 0px;
    margin-right: auto;
    margin-left: auto;
    background-color: transparent;
    background-image: none;
#wrapper #nav {
    background-color: transparent;
    background-image: none;
    height: 30px;
    width: 1000px;
    margin-top: 260px;
    clear: both;
    border-top-width: 1px;
    border-bottom-width: 1px;
    border-top-style: solid;
    border-bottom-style: solid;
    border-top-color: #FFFFFF;
    border-bottom-color: #FFFFFF;

hey there,
thanks so much for the insight on the firefox issue. hopefully they fix that soon.
as for the css, i do have a screenshot of what's happening. the background image seems to repeat after the navigation bar instead of keeping the transparent background. it's extremely odd and i've never seen it before. it can be seen in the attached photo.
thanks again for your help,
-e

I have problem with using maps and directions.

Hi,
I'm using iPhone 5, I purchased before 1 year from Qatar. I have a problem with maps and direction here, I have attached error message. Please kindly inform me reason.

The feature(s) you are looking for don't appear to be available in your country.
See:
http://www.apple.com/ios/feature-availability/

Problems printing using iPhoto and Epson Stylus Photo R2400

I'm using OS 10.5.6 and iPhoto 8.0.2(402) to print pictures on my Epson Stylus Photo R2400.
I have other printers set up on this computer and they all print everything just fine regardless of the program I am using.
Using the Epson Stylus, I'm able to print from any other program than iPhoto.
When I try to print pictures from iPhoto, I get the error message...
can't open ` /private/var/spool/cups/tmp/4a18c65407c9b (the numbers at the end changes each time I try to print.
When I go in to check the folders out to see what might be causing the problem, the permissions on the folder cups and tmp have the following rights set up. system = Read & Write, _lp = No Access, everyone = No Access.
I've been able to set the everyone setting to equal Read & Write access, but I can't get the _lp access to change. When I reboot the computer, the everyone setting goes back to No Access.
Any ideas for how I can get this to work?
Thanks,
Bill

Welcome to the Apple Discussions. I don't have a tried and true fix for that but I would start with dumping the printer driver via the System/Print pane and then reinstall it. Go to the Epson site to download the latest driver for that particular model in case there's a newer one released.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Another problem with using canvases and scrollviewers in tab

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Data;
using System.Windows.Documents;
using System.Windows.Input;
using System.Windows.Media;
using System.Windows.Media.Imaging;
using System.Windows.Navigation;
using System.Windows.Shapes;
namespace WPFDynamicTab
    /// <summary>
    /// Interaction logic for MainWindow.xaml
    /// </summary>
    public partial class MainWindow : Window
        private List<TabItem> _tabItems;
        private TabItem _tabAdd;
   //     private Canvas canvas1;
        public MainWindow()
           try
                InitializeComponent();
                // initialize tabItem array
                _tabItems = new List<TabItem>();
                // add a tabItem with + in header
                _tabAdd = new TabItem();
             //    canvas1= new Canvas();
                _tabAdd.Header = "+";
                _tabAdd.MouseLeftButtonUp += _tabAdd_MouseLeftButtonUp;
                _tabItems.Add(_tabAdd);
                this.AddTabItem();   // add first tab
                // bind tab control
                tabDynamic.DataContext = _tabItems;
                tabDynamic.SelectedIndex = 0;
            catch (Exception ex)
                MessageBox.Show(ex.Message);
        private TabItem AddTabItem()
            int count = _tabItems.Count;
            // create new tab item
            TabItem tab = new TabItem();
            tab.Header = string.Format("Tab {0}", count);
            tab.Name = string.Format("tab{0}", count);
            tab.HeaderTemplate = tabDynamic.FindResource("TabHeader") as DataTemplate;
            // add controls to tab item, this case I added just a canvas
            ScrollViewer scrollview1 = new ScrollViewer();
            Canvas canvas1 = new Canvas();
            canvas1.Name = "canvas1";
// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
            Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
            scrollview1.Height=200;
            scrollview1.VerticalAlignment = VerticalAlignment.Center;
            canvas1.Height=400+400*count;
            scrollview1.Content = canvas1;
            tab.Content = scrollview1;
//YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
            // insert tab item right before the last (+) tab item
            _tabItems.Insert(count - 1, tab);
            return tab;
        private void _tabAdd_MouseLeftButtonUp(object sender, MouseButtonEventArgs e)
            TabItem newTab = this.AddTabItem();
            // clear tab control binding
            tabDynamic.DataContext = null;
            // bind tab control
            tabDynamic.DataContext = _tabItems;
            tabDynamic.SelectedItem = newTab;
        private void Canvas_Paint(ref Canvas canvas1)
            int count = _tabItems.Count;
            switch (count)
                case 0:
                    canvas1.Background = Brushes.Green;
                    break;
                case 1:
                    canvas1.Background = Brushes.Red;
                    break;
                case 2:
                    canvas1.Background = Brushes.Blue;
                    break;
                case 3:
                    canvas1.Background = Brushes.Yellow;
                    break;
                case 4:
                    canvas1.Background = Brushes.Brown;
                    break;
                case 5:
                    canvas1.Background = Brushes.Orange;
                    break;
                case 6:
                    canvas1.Background = Brushes.Olive;
                    break;
                default:
                    break;
        private void tabDynamic_SelectionChanged(object sender, SelectionChangedEventArgs e)
      // this is a dummy method
and the xaml
<Window x:Class="WPFDynamicTab.MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        Title="Dynamic Tab" Height="300" Width="527" WindowStartupLocation="CenterScreen">
    <Grid>
        <TabControl Name="tabDynamic" ItemsSource="{Binding}" SelectionChanged="tabDynamic_SelectionChanged">
            <TabControl.Resources>
                <DataTemplate x:Key="TabHeader" DataType="TabItem">
                    <DockPanel>
                        <TextBlock Text="{Binding RelativeSource={RelativeSource AncestorType=TabItem }, Path=Header}" />
                    </DockPanel>
                </DataTemplate>
            </TabControl.Resources>
        </TabControl>
    </Grid>
</Window>
The program does the job but there are 2 questions. I am using a scrollviewer and each time the tab increases the canvas size increases and this is reflected in the scrollview bar getting shorter.
Question 1)
I set the scrollview1 height to 200 ,which was obtained by trial and error, increasing causes the extents to go outside the box etc,
the window height was 300 , is it possible to automatically set the scrollviewer height.
Question 2)
Is it possible to put the canvas and scrollviewer into the XAML I tried but failed
Note: the relevent code to the above questeions is between XXXXX... and YYYY...

>>the window height was 300 , is it possible to automatically set the scrollviewer height.
You should not specify an explicit height if you want an element to fill the available space. Just set the VerticalAlignment property to Strecth (which is the default value for a ScrollViewer:
Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
scrollview1.VerticalAlignment = VerticalAlignment.Stretch;
canvas1.Height = 400 + 400 * count;
scrollview1.Content = canvas1;
tab.Content = scrollview1;
//YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
// insert tab item right before the last (+) tab item
_tabItems.Insert(count - 1, tab);
return tab;
>>Is it possible to put the canvas and scrollviewer into the XAML I tried but failed
Well, you could define the ScrollViewer, i.e. the root element, as a resource and then add access it from the AddTabItem() method like this:
<Window x:Class="WPFDynamicTab.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="Dynamic Tab" Height="300" Width="527" WindowStartupLocation="CenterScreen">
<Window.Resources>
<ScrollViewer x:Key="sv" x:Shared="false">
<Canvas Height="800">
</Canvas>
</ScrollViewer>
</Window.Resources>
<Grid>
<TabControl Name="tabDynamic" ItemsSource="{Binding}" SelectionChanged="tabDynamic_SelectionChanged">
<TabControl.Resources>
<DataTemplate x:Key="TabHeader" DataType="TabItem">
<DockPanel>
<TextBlock Text="{Binding RelativeSource={RelativeSource AncestorType=TabItem }, Path=Header}" />
</DockPanel>
</DataTemplate>
</TabControl.Resources>
</TabControl>
</Grid>
</Window>
private TabItem AddTabItem()
int count = _tabItems.Count;
// create new tab item
TabItem tab = new TabItem();
tab.Header = string.Format("Tab {0}", count);
tab.Name = string.Format("tab{0}", count);
tab.HeaderTemplate = tabDynamic.FindResource("TabHeader") as DataTemplate;
// add controls to tab item, this case I added just a canvas
ScrollViewer scrollview1 = this.Resources["sv"] as ScrollViewer;
Canvas canvas1 = scrollview1.Content as Canvas;
canvas1.Name = "canvas1";
Canvas_Paint(ref canvas1); // Canvas_Paint defines the background color of "canvas1"
scrollview1.VerticalAlignment = VerticalAlignment.Stretch;
canvas1.Height = 400 + 400 * count;
scrollview1.Content = canvas1;
tab.Content = scrollview1;
// insert tab item right before the last (+) tab item
_tabItems.Insert(count - 1, tab);
return tab;
It may not provide that much benefits in this scenario though since you are setting the height and the background of the Canvas dynamically but it is indeed possible.
Hope that helps.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

Problem with "Using Validators and Converters" example

Hi,
I am doing the Validatoris an Converters tutorial and I can't get it correctly executed.
In step 9, I double click on textField1 and the systems goes to textField1_processValueChange function instead of textField1_valueChangeListener.
I added the code of step 10 as a separate method and after executing it there is no error message. Please help. Thanks,
I wish these examples where a little more of dummies: step 2 toke some time because you don't say "In the properties window". Please look the tutorials with people that does not know anything about the Creator.
Also I wish you had a step by step tutorial with "About Components", "About Message Components", and "About Converters". Just reading , I did not grasp anything, so I prefer to create a project with these tutorials.
Do I need to learn JSF in order to understand and use Creator? It seems as I read the tutoriasl you assume to much. I found that Cay Horstmann's Core JavaServer Faces book is downloadable at http://horstmann.com/corejsf/
Thanks for your input,
Lorenzo Jimenez

Hi,
You may find our book, Java Studio Creator Field Guide, helpful for a more gentle introduction to Creator and JSF components. We don't assume that you know JSF or even Java. We also have step-by-step instructions for building projects.
Here's the link to our website:
www.asgteach.com
(You can download Chapter 2, which is the basic introduction to Creator.)
Hope that helps.
Gail and Paul Anderson

Problem with using CNEX0027 and BOM

Hi Experts,
I need your help. If I activate user-exit CNEX0027 the BOM item is not transfered into components list of PM order. When UE is not activated the BOM item is transfered correctly.
I was looking for a note but it did not avail.
How can I solve this problem?
Regards,
Yura

Yura,
Activate the user-exit, but comment-out your code (i.e. no active ABAP code).
Then re-test.
I'm guessing that its your code causing the problem which is why I asked for you to post the code so we can see for ourselves..
PeteA

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer no problem with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer without any problems with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software. I tried, phone activation, web activation, nothing is working. I have the serial number and my Adobe account information. Any suggestions?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

Problem with use of COM+ Transaction and DB Transaction

Problem with use of COM+ Transaction and DB Transaction
We build a Web site that use sometime COM+ Transaction and sometime DB
Transaction. If we use a COM+ Transaction and a few seconds later we try to use
a Database Transaction (OracleConnection.BeginTransaction), we get the error
Connection is already part of a local or a distributed transaction
Of course the error does not produce everytime; it takes some try before we get
the problem. And of course, if i use pooling=false on the connection string,
the problem does not appear.
i run the Web page
and push the COM+ Transaction and DB Transaction one after the other for some
times and the problem should appear.
Environment: Windows server 2003, .Net Framework 1.1, ODP.Net 9.2.0.401,
Database Server 9.2.0.4

> Why in form builder can't I...
Is this happening at runtime or at buildtime? You'll need to provide more info on what you are actually doing that's causing the problem.
Regards,
Robin Zimmermann
Forms Product Management

Problem with using iPhoto and Preview

Similar Messages

Maybe you are looking for