Problem with using MXI-4 in a Magma expansion chassis
I have used the Magma chassis with the MXI-3 and everything works just fine. I just purchased a new MXI-4 system (PXI-1000B, 4472 6602) and my computer will not boot up. Are there any known differences between MXI-3 and MXI-4 that would cause this?
I am building the system for in-vehicle testing with a laptop PC. The only reason for the Magma chassis is to link the laptop to the PXI chassis. I would love a Firewire link directly from laptop to PXI-1000B but unfortunately, NI does not have one I am only using a 1-slot Magma, so I cannot try another PCI slot. I did receive a fix from Magma today that is simply a registry edit. It worked this morning, but have more validation testing to run tomorrow. I will post the info once I confirm it works.
Thanks for the help.
Similar Messages
-
i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..
The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries. -
I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account. -
I purchased Adobe Creative Suite C2 and have been using it for years on the same computer without any problems with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software. I tried, phone activation, web activation, nothing is working. I have the serial number and my Adobe account information. Any suggestions?
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium -
Problem with use of COM+ Transaction and DB Transaction
Problem with use of COM+ Transaction and DB Transaction
We build a Web site that use sometime COM+ Transaction and sometime DB
Transaction. If we use a COM+ Transaction and a few seconds later we try to use
a Database Transaction (OracleConnection.BeginTransaction), we get the error
Connection is already part of a local or a distributed transaction
Of course the error does not produce everytime; it takes some try before we get
the problem. And of course, if i use pooling=false on the connection string,
the problem does not appear.
i run the Web page
and push the COM+ Transaction and DB Transaction one after the other for some
times and the problem should appear.
Environment: Windows server 2003, .Net Framework 1.1, ODP.Net 9.2.0.401,
Database Server 9.2.0.4> Why in form builder can't I...
Is this happening at runtime or at buildtime? You'll need to provide more info on what you are actually doing that's causing the problem.
Regards,
Robin Zimmermann
Forms Product Management -
Problems with use cases in JDeveloper 11.1.1.1.0
Use cases made with JDeveloper 11.1.1.0.2 can not be used and edited in JDeveloper 11.1.1.1.0.
Same problems with Use Case Diagrams.
And it seems to be impossible to create new use cases in JDeveloper 11.1.1.1.0.
What are the differences between 11.1.1.0.2 and 11.1.1.1.0 if you look at use cases??In JDeveloper 11.1.1.0.2 each use case has one file with the folllowing name: *.xhtml_usc.
In JDeveloper 11.1.1.1.0 each use case has two files with a names like *.xhtml_usc and *.uml_usc (after standard migration with JDeveloper). I can still edit the *.xhtml_usc files, but I have no idea what to do with the *.uml_usc files. I can only open a Property-editor, but the properties I see have no relation with the text I used in my original use cases . New use cases only have a *.uml_usc file and a Property-editor. In javadoc the new use case does not appear.
My question is: why do I have two different use case files in JDeveloper 11.1.1.0 and how can I use the Property editor?? -
AxWindowsMediaPlayer problem with using subtitle sami.file in winform
Hello every body
I have a problem with using sami caption in axWindowsMediaPlayer;
how can I use it?
I used
axWindowsMediaPlayer1.closedCaption.SAMIFileName="FileNameAddress";
and
axWindowsMediaPlayer1.ShowPropertyPages();//and select sami file
but in both ways the subtitle is not shown in my axWindowsMediaPlayer1 control;
please help me for solving this problemHi ,
As i know the Synchronized Accessible Media Interchange (SAMI) file must use an .smi or .sami file name extension.
set the smi-file direclty like following
AxWindowsMediaPlayer.closedCaption.SAMIFileName = "subtitles.smi";
Please also refer here
for more details.
Follow the steps below for your Windows Media Player to display captions and subtitles.
http://support.3playmedia.com/entries/21934486-windows-media-files-windows-media-player-settings
Related thread, please note the Style secttion.
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/wmp-12-doesnt-play-sami-files-closed-captions/96fe98b7-1cdf-41f5-aa9e-a4e55fd07c0a
In addition, Could you please provide your smi or sami file and full code? It could be better to help us do some test on my side.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am having problem with using the Basic brush definition
I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)
for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.
-
I am having problem with using my Basic brush definition
I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)
Basic is not a brush, only a starting point for you to make a brush. Load the real brush you want before beginning to draw.
-
In FF4.0.1 problem with using HTML creator in WebCT. WHY? Not a problem in FF4.0.0
Hi Shane,
I passed through all the described problems in the list, and after doing several tests the error that you described is always present if the "jpcsclite_en_US.properties" is not present in the same place of the "jpcsclite.properties". I really don't know the reason, I just copied and pasted the same file, renamed the copy and the error was gone... though both of them include the line where the .dll is found!
That's how it worked for me, but if anybody knows how it works without that dirty trick, it would be good.
Regards,
Leandro
PS: Just in case that somebody is using the version JCSDK3.0, I did not find the .dll in that version, but in the JCSDK2.2.2 *(:-S)* -
I have a problem with using MacBook Pro as wifi router when connected to ethernet
I have a problem with using MacBook Pro as wifi router when connected to ethernet. The Airport icon changes to show a laptop inside, my iPad shows connected (I think) but Safari will not operate. I tried pinging my iPad, it seems to see the iPad, but no connection to Safari or to other apps such as Good on the iPad. I have read many posting and tried repeatedly via Sharing in Systems Preferences, but no luck. Suggestions to fix, or is this a Lion problem?
Usually this is a problem related to the domain name server address. If you open Network preferences, select your Ethernet port then click on the Advanced button then on the DNS tab. You will likely see an entry like 10.0.1.1 already listed. Click on the Add [-] button and enter 208.67.222.222 then click on the OK button and then on the Apply button. See if this helps.
if it does not help then repeat the above but with the Airport port. -
After installing Snow Leopard problems with using any of my Helvetica fonts
I've never really have a problem with any of apple's products until now.
After installing Snow Leopard I've found problems with using any of my Helvetica fonts,
which is a BIG problem if you work in DTP or print. You CAN'T remove the system version of Helvetica, and replace it with your own anymore.
Also Flash CS4 seems to be a dead duck, as after about 5-6 seconds of loading the program it crashes with a "KERNPROTECTIONFAILURE".
<title edited by host>Thanks Tom but the original post title was "Work in DTP, don't install snow leopard", but of course apple were unhappy with the title. I know the issue/problem has been discussed for months, the real problem is that it shouldn't be a problem which everyone has to find work arounds for.
After 4 days of playing about, I've finally got flash CS4 working and Quarkxpress was also a big problem for a few months. Printer description (PPD) files which snow leopard doesn't like, but worked in tiger & leopard.....means I can't use my two A3 inkjets for proofing anymore.
I'm just disappointed by snow leopard -
I have a problem with using (hotmail)
i have a problem with using (hotmail) , that when i try to use messenger through it , that shown many of pages can not be open , and my contacts are not available , when i contact with Windows Live team to solve the problem they inform me that the problem is with my browser , so i have to ask them about it , and i use Mozilla Firefox 8.0 , so kindly help me to solve this issue
That is a problem with Silverlight
On a Mac, Firefox 4 is a 64 bit application.<br />
Not all plugins support 64 bit and if not then you need to start Firefox in 32 bit mode to use that plugin.
# Close Firefox
# Start the Finder and open the Applications folder
# Right click or control-click the Firefox.app icon
# Select "Get Info"
# Select or Deselect "Open in 32-bit mode"
# Close the "Firefox Info" window
# Restart Firefox -
i am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation,what can i do to activate
This is the Adobe Reader forum. If you are talking about Digital Editions, the right forum is here:
http://forums.adobe.com/community/adobe_digital_editions -
Having problems with using shift alt command when using the square tool
having problems with using shift alt command when using the square tool
Marco,
If no good reason, such as the one suggested by Silkrooster, is present, you may try the list, hoping for one of the easy ones at the top.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Maybe you are looking for
-
How do I insert my Edge Animation into Wordpress as an animated/interactive graphic
How do I insert my Edge Animation into Wordpress as an animated/interactive graphic?
-
How do I put music that is on my laptop onto my Ipod nano 4th generation?
Im new to Apple products and the Apple web page itself. I ripped somemusic from my CDs onto my laptop and want to know how to put it all on my IPod Nano. I think it's a 4th generation. I greatly appreciate any good and helpful advice anyone has to of
-
XSL Transformation between arrays
Dear all I create to XSD for my variables: <?xml version="1.0" encoding="UTF-8" ?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns="http://www.asre-andishe.com/Inspec/General" targetNamespace="http://www.asre-andishe.com/Inspec/Gene
-
Retrieve elements that fail validation
Hi.. I've succeeded in parsing an XML string with schema validation. For my app I need to get a reference to the element that triggered a SAXException. How do I obtain a reference to that node. Could I in a simple way create simple contenthandler ext
-
in ipad1 with ios5.1.1 and latest ibooks app audiotags stop the last music played when the new music starts in ipad3 with ios6 and latest ibooks let all the music play together with a resulting mess in ipad2 with ios6 ibooks fade the last tag that i