Problem with V19 Scrollable Frame

I have a magazine that worked find on V18 of producer tools, since I upgraded to V19 I am having ptoblems.
I have a standard page size 2048x1536 (iPad 3), and I have the whole page set as a scrollable frame with a background placed behind it. Then all my content for the page is pasted into the scrollable frame which runs much lower than the 2048 page length. You can then scroll the page within the scrollable frame rather than having a long page to scroll down. This also creates a nice layering effect where the content moves on top of a static background.
This worked fine for me on V18 producer tools, but now when I load my magazine onto my iPad, I'm scrolling through articles and when I hit the page with the scrollable frame you can no longer scroll left or right and you're stuck on the page...
Any idea how I can fix this as I have a client that has seen and likes the layering effect? Last thing I want to do is have to remove it and just make a long page.

Which totally sucks, BTW.
If you use JPG or PNG then it works but you lose the razor sharp text and pinch and zoom that PDF provides.
I really don't get this one, either. Especially since the scrollable frames option gives you the ability to make it vertical only. That should eliminate any "confusion" as to which way to you want to scroll and which way you want to swipe.
Bob

Similar Messages

Problem with rendering still frame capture in FCP7

I'm a hack, so let's keep that in mind as I ask this question....but I *did* try to look through the forum for a similar issue before I created this post.
My situation: I am pulling some HD video from a Canon Vixia into FCP and basically just piecing it together with some minor editing to match music beats, etc. for some local sports leagues. Generally I find no issues with FCP, although I've only been dabbling with it for a few months.
My problem: My latest creation here: http://anothermotherproductions.smugmug.com/Movies/2011-Lacrosse-sample-movie/17 693649_L5rr8X does something annoying. I pulled a still frame from the video clip to let it hang there for a few seconds. See the 1:01 mark. The still frame looks clear in FCP, but when exported (and I've tried a few different formats, like h.264, pro-res, and "sharing" it for iPod) the image is ugly - looks like a motion blur from an old TV or something.
I've checked that the last frame of the video clip is the frame BEFORE the still frame, so walking step by step through the sequence reveals a normal sequence of motion, with the final frame "hanging" there for a while because its the still frame.
Make sense?
Anyone have constructive input?
Thanks.

Thank you so much - that helped tremendously. Image looks great now, AND I learned something.

Problem with opening new frame in netbeans

Hi...
I have created a jframe in netbeans when i try to open this frame now i got a warning form loaded with errors errors occurred in loading the form data.....
How to solve this problem?

How to solve this problem?Learn Java.
[http://catb.org/~esr/faqs/smart-questions.html]
db

Problem with opening two frame by single hyperlink

HI to everyone,
I making a project , in that i want if i click on a
particular hyperlink. then it open two Different frame which is
showing different content . one is in the same page in which is h
yperlink is appearing pelink (means in the same frame ) and the
other frame showing some other content , Robohelp allowing to do
this event seprately but not simultanously............i want to
perform this both frame should be open at same time by single
click...........
plz if any one know solution of this problem plz let me
know.....................
Thank's
Roziao

Hi RoboWizard,
I understand (I think!!!) about how to create a frameset
using the method you detailed. Say I create a frameset with 2
frames: 'TOC' frame on the left and 'Details' frame on the right.
When I create the frameset I specify the default 'TOC' topic as
tralala.htm, which is a basic list of contents. I don't know the
full list of contents to display until the user clicks on a link to
display a topic in the 'Details' frame. I specify the default
'Details' topic as Welcome.htm, which is an introductory topic.
Say my initial Blurb.htm topic (as described in my previous
post) contains two links:
How to make a cup of tea
How to perform a headstand
If I click on 'How to make a cup of tea' I would like to
display my Outline.htm topic in the 'Details' frame giving an intro
about tea and the art or making it, and a task list Contents.htm in
the 'TOC' frame detailing each step in making a cup of tea. When I
click on a link in Contents.htm, it updates to the relevant topic
in the 'Details' frame.
If I click on 'How to perform a headstand' I would like to
display Outline2,htm topic in the 'Details' frame giving an intro
about balancing and seeing life upside down, and a task list
Contents2.htm in the 'TOC' frame detailing each step in performing
a headstand. When I click on a link in Contents2.htm, it updates to
the relevant topic in the 'Details' frame.
However, what actually happens is:
I click on 'How to make a cup of tea'. Outline.htm topic
displays in the 'Details' frame, and the tralala.htm is still
displayed in the 'TOC' frame. To display Contents.htm in the 'TOC'
frame, I would have click on a separate link.
Same problem when I click on 'How to perform a headstand'.
I hope this example explains my problem a little better. Do
you understand?
I'm sure there is something blatently obvious that will
overcome the problem. I've only recently discovered frames, so my
knowledge is not the greatest on this subject and hope there is an
easy answer to solve my issue. I'm hoping for a 'Doh!' moment!
Many thanks for your help.
Liz

So close to fixing this problem with iMovie clip frame rate!

Hi! Please help!
I'm recording short videos in iMovie using the built-in camera on my Macbook Pro. I did this yesterday and again this morning without incident. Everything worked great. Then, this afternoon, I made another video - EXACTLY the same way I'd done the other ones - and yet, this time, the clip mysteriously recorded at 18fps instead of 30fps. As a result (I think) the audio is out of synch. I have detached the audio as some have suggested in other forums, but this has not fixed the problem.
QUESTION: How can I convert the clip from 18fps to 30fps?? Is this even possible?? I'd really like to avoid re-recording, if at all possible.
I am a novice. Please explain any solutions to me as though I am a child. Thank-you!

mattias.rylander wrote:
I meant to say it only (if I may generalize here) makes a difference when you edit. Don't try to edit 30 fps material in a timeline meant for 25 fps. Very few applications can accomplish this with a good end result.
Are you speaking about this particular change of frame rates or any?
Having transfered Super 8 film that was shot at 18 fps, I have little choice but to change the rate. So far everything seems to be working out fine. For 24 fps iMovie does a pull-down of 1 1 2; for 30, 2 2 1. I'm a little confused as to whether I should use 24 or 30 fps. I'll be asking about this in a new thread.
The easiest way to change a projects framerate is to edit the project xml file.
Right click on your iMovie project file and choose "Show package contents..." (or something similar)
Edit the "Project" file (no extension) using the free Textwrangler editor or a plist capable editor.
Find the node "frameRate" and update to 30.
Really? That's a cool trick! But it sounds like it could easily mess things up. Have you tried this and with what scenarios?
or easier just create a new project
HTH
Message was edited by: betaneptune. Changed "under" to "with" for better clarity.

CS4 Problem with Matt and Frames

Hi,
I am new to CS4. I have CS4 Extended. I also have Photoshop Elements 6, which has a choice of a drop shadow Matt and a frame gallery with many examples to choose from. See Matt and Frame examples from Elements 6 applied to photos here:
http://lombard-avenue.smugmug.com/photos/421448917_fGNao-L.jpg
http://lombard-avenue.smugmug.com/photos/422832492_DY9Ng-L.jpg
http://lombard-avenue.smugmug.com/photos/421970690_DM2Z6-L.jpg
http://lombard-avenue.smugmug.com/photos/422774454_9zD3g-L.jpg
http://lombard-avenue.smugmug.com/photos/420505658_Zsqq9-L.jpg
http://lombard-avenue.smugmug.com/photos/422600870_9nuCH-L.jpg
However, I cannot find any Mattes and Frames in CS4. Where are they located? Are they included CS4 at all?
Please advise.
Any help would be greatly appreciated.
Thank you,
Den

Other than a very few, I would say the frames detract from the art within, because the frame has more texture and depth than the art.
Compositionally, areas of high contrast or fine texture or large shadows draw attention to themselves. This art is relatively flat and the frames seem more the subject than the art.
I realize this is likely because the frames are canned from PSE and you may not have much choice other than the colors.
Your initial post doesn't really ask a question, but I assume you are asking how to create similar frame effects within Photoshop as you can from Elements. Photoshop doesn't come with as many high-level things built-in from Adobe, but there are a wealth of plug-ins that extend Photoshop's capabilities, www.autofx.com is a place to look, or better yet, is to teach yourself how to accomplish things, by looking for tutorials or reading books.

After Effects CS6 render problem with exactly one frame or exactly at one point in the timeline.

I've recently tried to render a project in After Effects CS6 but everytime I render the render fails at exaclty one frame or a time in the timeline, in this frame or point in timeline I have a composition with the following effects: Twixtor Pro and inside that composition I have the video with the following effects: Motion Tiles and Wave Warp. I rendered the project in H.264 format with a 8 bitrate. I tried to fix this even by trying to render the project as a TIFF Sequenece but the render keeps failing and the final output is only the part of the video until that exact frame. I have caps lock on to try to speed up my render. Any help would be appreaciated and let me know if you need more information and i'll try to give you more.

Set your work area to about 5 frames before the fail and 5 frames after and see if you get a fail.
If you get a fail then start turning off a layer at a time until you find the culprit. Let us know what's going on there.
A screenshot of the timeline with all properties revealed may also give us some ideas.

Problems with components in frames

I have my applet (applet-application hybrid, actually) make a Frame and then add a few Components to it, like a Textfield and a Checkbox and a few buttons. On my Macintosh, everything renders fine, but in Windows, it will never draw the textfield or checkbox, only the buttons. Any idea why this is happenning? I'm sure the components are created and added and drawn in the Paint method of the frame, but they never show up and if they do they flicker on and off.
This brings up another point that has been frustrating me ever since I started working with Components. Why can I only call setSize() or setLocation() within certain methods? To clarify, if I implement Runnable, and I try to setLocation in init(), it will fail, but in run() it works fine.
I'm sure these are dumb questions, but from my perspective Java is doing a lot of stupid things that are merely confusing and frustrating me. It seems like once you set some attribute of an object it should remain like that. Why would the location of a checkbox or a button or a list change from init to run? It makes no sense to me and it forces me to make silly workarounds. This crap with frames and paint are so ridiculous that I can't even figure out a work around.
Please help. I'm on the brink of scrapping this entire GUI that I've been slaving over. I'll post some cleaned up code if anyone wants to see what I'm talking about.

Some layout managers doesn't care about setSize and setLocation is only needed when you build a GUI without a layout manager (setLayout(null)).
And if your gui flickers, then it sounds like you are calling repaint in your paint method (that could be one cause).
The most configurable layout manager is the GridBagLayout, but may not be easy to use if you haven't tried it before.

I'm having problems with the opening frame and can't find a way to deal with it.

When I open a file, the full Illustrator frame changes from maximum to a smaller frame. Why? How can I set the program to stay at a full frame and not have to resize the Illustrator every time I open a file?

Thanx Harron, I thought to myself that I was either going to mess up somewhere and get lost or just screw up my settings, but I followed the instructions you gave and it worked perfect.
Thanx again,
Sean

Problems with importing video frames to layers

Whenever I try to import video frames to layers (File > Import > Video Frames to Layers), the little preview box of the video doesn't show up, and when I click "Okay" it only creates a bunch of solid black layers. I'm using .avi videos, which should be compatible. Can anyone help me out? :/

Also, you can make sure your system is 64 bit capable by:
Open Performance Information and Tools by clicking the Start button , clicking Control Panel, clicking System and Maintenance, and then clicking Performance Information and Tools.
Click View and print details.
In the System section, you can see what type of operating system you're currently running under System type. Under 64-bit capable, you can see whether you can run a 64-bit version of Windows. (If your computer is already running a 64-bit version of Windows, you won't see the 64-bit capable listing.)

Having problems with resetting the frames

Hi.
I have a jsp page that is set to 4 frames(the codes is below).
at the main frame, it has a logout button for users to log out. However, when i try to logout. The logout screen only takes the space within the body frame. What must I do to display jus the logout screen?
Thanks for helping!
<%@ include file ="../JSP/Control.jsp" %>
<HTML>
<HEAD>
<TITLE>File Repository System</TITLE>
</HEAD>
<FRAMESET COLS="1400,28*" frameborder="no" BORDER="0" NORESIZE>
<FRAMESET ROWS="80,69*,21">
<FRAME SRC="header.jsp" NAME="header" SCROLLING="no" MARGINHEIGHT="0" MARGINWIDTH="0" NORESIZE>
<FRAMESET COLS="370,*">
<FRAME SRC="a.jsp" NAME="left" SCROLLING="auto" MARGINHEIGHT="0" MARGINWIDTH="0" NORESIZE>
<FRAME SRC="Main.jsp" NAME="body" SCROLLING="auto" MARGINHEIGHT="0" MARGINWIDTH="0" NORESIZE>
</FRAMESET>
<FRAME SRC="footer.jsp" NAME="footer" SCROLLING="no" MARGINHEIGHT="0" MARGINWIDTH="0" NORESIZE>
</FRAMESET>
<NOFRAMES>
<BODY>
</BODY>
</NOFRAMES>
</FRAMESET>

for the logout button, set it's target to be "_top"
ie logout
That tells it to replace the entire frameset, no just the current frame that it is in.
Cheers,
evnafets

Scrollable frames question.

Hey there,
we've got a problem at work with building scrollable frames.
We've made endless amounts of regular scrollable frames, which all work perfectly.
But now we're trying to paste an image into a "free shape" (triangle for example, or a trapezium,...) and make that scrollable.
It works fine in indesign, but when viewed on the iPad. the triangle shape (or any shape really) turns into regular rectangle again.
Is there a way to do this? Or are scrollable frames always rectangular?
THANKS!
kev

cvg.br, follow Bob's suggestion to the letter:
- create your scrollable frame using rectangles
- draw the non-rectangular shape you want to use as a mask and arrange it in front of the scrollable frame
- with the non-rectangular shape selected, convert it into a multi-state object (it'll become two identical states)
- set the MSO to autoplay once (everything else unticked) in the Slideshows section of Folio Overlays

Failed to load the folio. Pan Only, Scrollable Frame Overlay

Hello All,
I get the error "Failed to load the folio." when previewing a page in the Content Viewer with a scrollable frame overlay using this technique described here:
Create scrollable frames using Pan Only:
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f605e8ea44412b13edc5ec-80 00.html
I checked the KB but the solution to remedy the problem is vague. I am not using any offending characters and what's odd is that I can pan and zoom images without a problem. When I try to scroll the text I get the error.
The folio I am testing is a new document, there is no other content other than this text frame. I've compiled other folios without a hitch but this is the first instance I am using this technique. The workstation I am working on had the prerelease tools on it then upgraded to the most current version about a week ago.
I am guessing that maybe the prerelease tools were not properly removed and that could possibly be a problem? If so what files am I looking for or is there a link someone can provide?
Or maybe the current tools/Content Viewer need to be removed and installed again? Again, what files need to be removed?
Thanks for your help, I really appreciate it.
D.

Hey Peter,
Thanks for the link. I have tried both techniques, the layer and the paste into and both yeild the same result with the "Failed to load the folio." error. I also forgot to mention that I am using CS5.
D.

Problems with buttons in video

Hi there,
I did a project with only one slide with a slide video and a few klickable buttons. So, I want to create an interactive video with all interaction within the videoplayer, so that one can watch the video fullframe.
Klick on a button stops the video and calls a picture, which I put in the timeline of the slide video in a seperate layer. Here is the extended action, which is called by clicking on the button
When klicking on the called picture, the picture disappears and the video resumes. Here is the advanced action, which is called by clicking on the picture:
Here you can see the project (first button at about 0:45 - by the way: is there any possibility to add timecode and fullscreen-button to the captivate-player??):
www.frisbee-marketing.de/knoblauchsland/lerndoku-gemueseanbau-v2/lerndoku-gemueseanbau-v2. htm
Problems:
1. When the video resumes after klicking first on a button and then on the called picture and you want to go back in the video-timeline and klick the button a second time, the button don't appear a second time (or the picture appears instead of the button)
2. The button around 6:30 never appears but every time, the picture which should be called by klicking the button appears directly. I use the same kind of advanced action like at all other buttons, but it don't work:
I think about, if my strategy of putting all on one slide, is right...
...maybe it would be better to call a seperate slide by clicking on the buttons, and not a picture on the timeline of the slide with the slide video. But: I didn't found a way to jump back to the exact position of the slide video, from where the picture is called. Is there any possibility to do that?
Has anybody an idea, what to do, so that all buttons work reliable in the intended way?
Thanks a lot
Markus

Hi Neil,
Thanks for replying.
I'm using version 32 of the viewer in DPS Folio Properties. I'll describe what I made:
I created an MSO and Scrollable Frame on one page. Inside the MSO are 13 states. Inside the Scrollable Frame are buttons that link to each MSO state.
When I tested it on the latest Content Viewer on my iPad Air, the Scrollable Frame works. The buttons also work, they're able to change the state of the MSO -- BUT ONLY when the Scrollable Frame is STILL, not in motion.
This is the problem: When the Scrollable Frame is in motion and I want to stop the motion as well as tap the Button that I want to go to, the tap does not change the MSO state. But the Click state of the button does change (Normal state: purple, Click state: light purple). Then when I try to tap the button again, or any other button that is in view, the entire Scrollable Frame freezes.
When I tested this on the Desktop, it works perfectly. The Buttons are able to change the MSO states when I tap them, even as the scrollable frame is in motion.
Why does this not work on the iPad?
PS. I tested all viewer versions from 20-32 on DPS and I still get the same problem.
thanks for your help,
Ivee

Problem with InDesing hiding and other programs can not be opened on screen at the same time.

I have just installed InDesign on my Mac today. When opened it takes up all the screen and then when I try to open any other programs like a browser, it hides. I would like to make the InDesign window smaller, so I can follow instructions from a website, but the minimize window size buttons are not showing up at all. Any idea how I can fix the InDesing window size and show it along with the browser? Also how to detach it from Finder bar on the top of my screen?

Hi Guys,
Thank you so much for all your help. I was now able to fix it. It was after all the problem with the application frame being Off by dafout. It was showing up, but taking my whole descktop. Now when I followed your advice and checket it on under "Window" , it become much smaller and I am not able to resize it and the buttons to minimize or close it are now showing up (they were invisible before). Thank you so much to all of you who have helped me here.
If I may have one more question, I have enocuntered another problem with using this Trial version of inDesign. When I wanted to access Bridge from the Bridge icon inside the program, I got an message that I need to download it from Creative Clowd. I found it strange since I have Photoshop CS6 and Brigge is part of this program, so I don't want to pay for it via Clowd service.
I was able to open Bridge by just clicking on the program from my software launch screen, so it is now working along InDesign, but I wanted it to be part of the InDesign workspcace, so it would show along the program frame on the right of InDesign window and then could be attached there and moved along with it. In such set up I won't need to move each program frame separatelly when they are in my way while I work. I wonder if it could be fixed and how. Any ideas? I would appreciate very much your reply.

Problem with V19 Scrollable Frame

Similar Messages

Maybe you are looking for