Problem with v5.0719.0.2 firmware

hello..i updated my nokia n80 firmware to
v5.0719.0.2 but now the time and date settings resets after turning off the phone what i must do now for solving this problem??????

Thank you NOKIA!
Yes the firware update went great and I can now read USSD messages.
I think the problem was simply the ISP having one of it's frequent problems.
So once the connection picked up so did the update.

Similar Messages

Anyone NOT having problems with ITunes 8 and latest firmware update???

I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

PLEASE HELP - Serious problem with my Creative Zen Touch firmware

Ok, so I finally decided that I would upgrade to the latest firmware version for my Creative Zen Touch. I knew that doing so would erase everything on it, so I backed up everything onto my computer's hard dri've. So from that standpoint, I'm in the clear.
HOWEVER, during the upgrade process, my computer froze, leaving my precious MP3 player without ANY firmware. This then drove it into "recovery" mode, where I can either clean up, format, or reload firmware. I've gone through each of these options, but when I go to "reload firmware" my computer will no longer detect my Zen! I've tried reinstalling different driver versions, different firmware versions, etc. The bottom line now is that my mp3 player has no firmware, and my computer won't detect it.
I feel like I probably need to go back to the basics. Unfortuantely, I don't have my installation CD with me. Can anyone post the initial installation file please? Thanks in advance!
I really hope I can work this out, I don't know if I've gone a day without my Zen in the past two years!

Simon, this is actually a common problem with the touch. Mine did it about a year after purchase, so I was safe to open it up and fix it. It is actually a really simple fix and is due to a loose connector. I know alot of other people on nomadness.net were having this problem, so I posted a solution here. Hope this helps!
http://www.nomadness.net/modules.php?name=Forums&file=viewtopic&p=42838

Problem with the new version of firmware for E72 a...

The facebook application for E72 does not work with the new firmware version 031.023.
The option key does not work and you not exit the application.
I reinstalled the software and the result is de same.
E61 - E51 - E90 - E71 - 5800 - E72 - E52 - E55

gougher wrote:
anan5002 wrote:
same here.... but in my case... i have more problem. Sometime when open any apps, the keypad will become no responce... which mean the left menu "option" and right menu "exit / close" will not work.. This happen also when replying messages... none of the keys will work... enyone else having the same problem?
Yes I'm having the same problems since the latest firmware update. Facebook "options" not working and cannot end app + OVI app does not allow you to proceed after you use the "search" option. Looks like the latest firmware has fixed some keypad problems but created some new ones. Come on Nokia address these issues as a matter of urgency. I will volunteer to test for you if you like because you obviously haven't tested the latest release properly as these are obvious issues!
Got fed up waiting for Nokia to got off their bums and sort this. Ovi store is selling RoadSync5 for £8 - usual price £45! Also ironically had issues getting it download as per original post but if you search for RoadSync in Ovi (on the phone) then let the phone lights go out then click the joystick again the screen reformats and allows you to search. You will need to do the same with the actual purchase to enter your password - put the password in, click - nothing will happen, leave until the lights go out - screen has reformatted and you can click, then click purchase.

Problems with Audio after update to Firmware 2.1

Dear Blackberry users
Im using a Playbook SN 1344-6061-5356. After update to firmware 2.1.0.1753 the audio function is not working if I am connected with USB speakers.
Pairing is okay, but the audio stream comes with no volume.
Urgent help would be welcome . Thank you.
Clemens Heddier/Germany

I dont have my BT gateway with me but will test tonight.
Have you tried removing the pairing and pair it again?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

PLEASE, PLEASE HELP: Big problems with my Zen Touch. (Firmware/driver issu

So here's the deal:
Last night I thought I'd finally take the time to upgrade my Zen Touch to 2. from .3 or something like that. I noticed that there was a warning saying that this was no small upgrade, and that I should back up everything I have on it.
I'm glad I did, because now my MP3 player situation is seriously screwed up, big time. During the upgrade process, my computer froze, leaving my Zen Touch without firmware (ok, so firmware version 0.0.0). Upon turning the device on, it boots up in recovery mode. This allows me to either format, clean up, or "reupload" firmware. I've tried all of these options, but the fact is clear that my computer simply will no longer recognize my MP3 player.
It does, however, recognize it at as a generic storage device. However, this isn't enough for me to reinstall the player's firmware unfortunately.
So basically, I can't update driver or firmware right now, because my computer won't acknowlege my Zen Touch!
Somebody please, please help.
I've already tried using the setup file from http://www.jumpingcholla.com/jce_nomad_ZEN.htm.
Seriously, please help!

Sort of success!
I now finally have firmware 2. installed on my Zen Touch! Yeah! I'm not entirely sure how I did it, and I'm not bothering to find out, I'm just glad I finally got it on there.
But some problems still remain. After all this fiddling with my driver and firmware and whatnot, my computer just doesn't see my MP3 the same way as it used to. Before, it was great, all I had to do was plug her in and I could bring up Zen Explorer in Windows Explorer, or organize my stuff in Creative MediaSource.
Now that's not the case. The only way I can sort of add stuff to my player now is by going into Windows Explorer, which is still more or less acknowleging my player as a "portable device". Granted, there is a dri've called "My Zen", but it doesn't bring up Zen Explorer like it used to when I click on it. Furthermore, when I go into MediaSource, I can't select it as a location, there just isn't anything there.
It almost seems as if my computer thinks I'm just using a portable hard dri've. Is there anyway I can tell it that it's an MP3 player, too?
Thanks!

Problem with Nokia Suite updating e71 firmware

I had to do a hard reset on my e71 and now I'm trying to update the 400.21.013 firmware from Nokia suite, but an error occurs. It says that I need to disconnect the phone and try again. Then it says that if that doesn't work, to reinstall Nokia suite. I have done this with no succes and still getting the same error message. What can I do to update the firmware? Also is it possible to update to one of the earlier firmwares that is no longer listed currently on the support site?? Thanks for any help and suggestions.

@dudersup
Have you tried using NSU? I can't guarantee if it'll work, it's a known issue now that the Suite is giving some users, including myself, a hard time in updating software.
Also try older versions of Ovi Suite, could possibly work.
Hope you get your phone back up and running.
N8-00,Galaxy Tab 10.1

I have a problem with restoring the ipad 4 firmware ... it says error ... how can i do fix it ???

help me?

If you can provide a detailed description of what you want to accomplish, what you have done so far and all the messages the device puts out, we may be able to help.

Reporting a problem with firmware and secondary ca...

Hi there,
I would like to report a problem with the 202.12.11 firmware for the Nokia E75.
My secondary camera works fine with the normal camera application until I make a video call. The picture for the video call using the secondary camera is just white and blank.
After making the video call, the secondary camera won't work with the default camera application. I can switch between video and image mode but all I see is my camera wallpaper.
It's definitely not the hardware because the secondary camera will work again after reinstalling the firmware .... until I use it in a video call that is!
I have also had no problems with video calls using the older firmware.
Please advise and I hope you can issue a patch soon.
http://zhi-lee.com

I had the exact same problem. I eventually used their "Express Lane" problem reporting, and they refunded me the cost of the episode. (???) Um, hello, that's not what I was asking for... can I just have my episode #3 please? Hopefully they'll get around to uploading the right show eventually, and possibly not use the Swedish Chef as an intern to manage their upload queue. #borkborkbork

Problems with the latest firmware upgrade

I found a problem with the 01-10-2006 firmware upgrade. Now that it is inside my ipod certain videos don't play properly anymore. Actually the video starts, it plays normally for a while and then it goes still for a few seconds and then, when it plays again, the audio is gone.
It always happens in the same point with the same video. In particular, just in case someone wants to try, it happens in the latest nasa video podcast.
I don't know what to do!
I'll try to step back to the 1.0 version...

I'm having this problem as well. Sinse I updated the firmware all of my movies get stuck about every 10 seconds then if I wait a few seconds they start up again but with no audio. I'm quite certain that this is a problem with the firmware sinse the videos play fine on quicktime, they used to play fine in my ipod before I updated it, and I can get it to play the parts it gets stuck at if I rewind it but it happens very frequently and each time takes a while to reload. If anyone has found a way to solve this problem please let us know.

Nokia 5800 Restart Problem with the Memory Card

hi,
i am facing a peculiar problem with my 5800.i hv firmware v21.
Whenever i restart the phone with the sd card inserted (it has around 35+apps/games loaded but 4.3GB of memory is free) ;the phone hangs up at the "nokia" screen & i hv to remove the battery.on ejecting the card & then restarting; the phone starts up fine.on inserting the card later after the restart; it is read without any problems by the phone & all the apps. work fine.i do not hv any apps loaded for start up.
i saw similar problems posted in some other topics for 5800;but could not get a clear idea whether this problem was occuring in other phones as well.Is it firmware related or due to large no. of apps on the phone?
please help.

it is most likely the corrupt memory card issue, it happens quiet often. that is why back up is so essential to have especially of memories and such. for that i use share online and upload my pics right away to ovi or vox whichever.
the programs you bought you should be just able to download once again and plug in the key you have gotten with your applicatioins. you should be able to recover all of your purchases. i am sorry for your pics for those can't be recovered
i always keep a separate email folder for all my application keys so i can find they easily as phones and memory does get corrupt. i can do it relatively quickly and have the info handy even on the go
Message Edited by radical24 on 22-Jul-2009 01:03 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

Problem with Time Capsule after upgrading to firmware 7.6.1

I am currently using Time Capsule Firmware 7.6 and just upgraded to 7.6.1. After the upgrade, my IPad 2 cannot access iTune, App Store and Safari cannot access any web-site. Email and other Apps which require Internet access have no problem with connection. My other Apple devices like iPhone and Mac Pro have no problem with Internet access and can access App Store, and Safari can access web site as normal.
I tried to downgrade the Firmware back to 7.6. After the downgrade, iPad 2 can now access iTune and App Store. However, Internet access via Ipad 2 is very slow, at only 1M download and 0.2M upload Internet speed. The same issue occur with my other iPad 1 too. When I check Internet speed on iPhone 4 and Mac Pro, the result is normal, at 25M download internet speed.
Please let me know how I can resolve this problem.

I just read other discussion treads on Time Capsule Firmware upgrade to 7.6.1. It seems the whole community is having the same issue ie slow Internet connection speed and even some users are reporting unstable connection. If Apple is reading these treads, Apple should do something to either stop allowing the Firmware upgrade to 7.6.1 or rectify the issue with another Firmware upgrade without this problem.
If Apple has read and is not taking any action, then, we all should question what exactly is the management hired for?

I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?

I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?

Good morning
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3125
Hope this helps
Cheres

Firmware problem with imac

hello, i have a problem with my imac 27 inch, late 2009 (11,1). it doesn't starting after the firmware update. with firmware restoration can i use?

If you cannot get it to boot you will need to take it into an Apple Store or AASP to be fixed.

Problem with v5.0719.0.2 firmware

Similar Messages

Maybe you are looking for