Problem with variable in last page only context
Hi,
I am using a variable to sum the amount. And i need to print that variable in the footer of last page. I am using last page only context command(<?start@last-page-first:body?><?end body?><?call:footer_template?>) for printing the footer table in last page.
Can i access the variable in last page only context. Its giving error for me. how can i access that variable.
Thanks in advance.
Yunus,
I did what you said. I removed the variable from characteristic restrictions, saved the query and executed the query, appeared three variables Plant, Calender month and material. executed and saved the work book. disconeted from Bex analyzer, in RSRT Generated Report and logged into Bex analyzer ran the work book for selection Plant, calender month and material and went into change query definition and added the variable for customer which was removed earlier and and ran the query for selections Plant, Calender monmth, Material and customer. saved the work book. disconnected from Bex analyzer and closed all excel sheets and work books. In RSRT Generated Report and again connected to Bex analyzer and ran the work book, now appeared only three variables again missed variable customer.
Yunus does any missed n the procedure what i did.
It is helped what Chris was answered.
Many Many Thaks for your time and replies.
Thaks in advance
Narendra
Similar Messages
-
Problem with variable in the woorkbook selection screen.
Hi All,
I have Problem with Variable in the selection screen. I have four variable in the report in this sequence
<b>Plant (optional), calendar month (mandatory), material (optional), Customer (mandatory). </b>
In Development system, I changed the query to fix the problem for a formula. saved and executed the query. In the selection screen appeared four variables and executed. after executing the query and I saved the work book also. I logged out of the Bex Analyzer. In the RSRT I generated the report by clicking the Generated Report push button. and again logged into the Bex analyzer and ran the work book, now in the selection screen, appeared three Variables only, I am missing the variable <b>Customer</b>.
The old report which is already in the Production system is working fine. What could be the mistake I did in the development system.
It is very urgent, I need to deliver this object as soon as possible.
Can I anybody help on the same.
Thanks in advance
NarendraYunus,
I did what you said. I removed the variable from characteristic restrictions, saved the query and executed the query, appeared three variables Plant, Calender month and material. executed and saved the work book. disconeted from Bex analyzer, in RSRT Generated Report and logged into Bex analyzer ran the work book for selection Plant, calender month and material and went into change query definition and added the variable for customer which was removed earlier and and ran the query for selections Plant, Calender monmth, Material and customer. saved the work book. disconnected from Bex analyzer and closed all excel sheets and work books. In RSRT Generated Report and again connected to Bex analyzer and ran the work book, now appeared only three variables again missed variable customer.
Yunus does any missed n the procedure what i did.
It is helped what Chris was answered.
Many Many Thaks for your time and replies.
Thaks in advance
Narendra -
Problem with Variable screen in WAD
Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
AbrahamHi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André -
Need ideas on how to display a footer on last page only on a dynamic document
I have a document that is similar to this...
Dear Customer,
paragraph 1 content dkdk dkd alkfdjaldkjfa d
dlkfajd;lkfja;dlkfj a.
[repeating subform transaction data]
Closing paragraph please contact us using one of the numbers listed below
contact info
The problem I am having is that I want the Contact Info block to appear as a footer on the last page only. In addition, I want the Closing Paragraph to be on the same page as the contact info block. The contact info is currently anchored to the bottom in the design view and when the transaction data repeats, it incorrectly pushes the closing paragraph into the contact area. So basically if the closing paragraph starts to bleed into the contact info block, I want both closing paragraph and contact info to break to a new page. I don't want to reduce the height of the content area because I want the transaction data to have the ability to display in the full length of the height if needed.Every time you add an instance to you subform, you should hide the footer in the previous instance
e.g.
when adding an instance
var intCount = _subform.count;
_subform.addInstance(1);
Reference_syntax.resolveNode("subform[" + intCount.toString() + "].footer").presence = "hidden"
when removing an instance if applicable
_subform.removeInstance(x);
var intCount = _subform.count - 1;
Reference_syntax.resolveNode("subform[" + intCount.toString() + "].footer").presence = "visible"; -
Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages and trying to insert a text box autmatically creates new pages- what the **** is going on??? Is this programme really this badly thought out? I thought everything apple was supposed to be intuitive!?!?!? Help.
You can not insert a section break into a textbox.
You appear to have a lot of objects with wrap set, that once you take them out of the flow of text (by sending them to the background) causes the text to reflow and contract into fewer pages. Pages is almost unique in the way it forms up pages in Word Processing mode only so long as there is text on them.
I suspect you probably have hammered away at returns, spaces and tabs as well to position things, which only works to add to the mess.
Download the Pages09_UserGuide.pdf available under the Help menu and swot up a bit on how it works.
You may find this a usueful resource as well:
http://www.freeforum101.com/iworktipsntrick/
Peter
PS There is quite a lot of programming in OSX that is far from "intuitive". Pages is easy at one level, when using the templates, otherwise it can be quite frustrating. -
Localizing Analytics Web Catalog - problem with variables
I tried to localize strings in OBI EE Web Catalog. I exported those captions using catalog manager, translate messages in XML file and put them to \Web\Res\l_xx\Captions. It works quite good.
But there is problem with variables in Title. Replacement of variables STOP working :-( At the page is displayed for example: "@{biServer.variables['MaxDate']}". Variable replacemen works fine in narrative views.
Do you have some ideas?
Thanks.We have the same problem with presentation variables in titles using externalize strings option, they stopped working after tranlation.
We tried with Oracle BI EE 10.1.3.2.1 and 10.1.3.3.3 with same result.
Any ideas?
Thanks -
How to report header and footers on first and last page only
Hi
We are trying to create a report that has a one data header on the first page and another header on subsequent pages then the data body then a footer section on the last page only. If we only have one page of data it works fine but when we move to multiple pages the data body section does not expand to fill the gap and we are left with second header but then a gap before the data.
We have tried to use anchors but are realy stuck. Any help would be greatly appreciated
IanSomething like:
LOOP AT t_output1.
WRITE:/1 vline,
2 t_output1-ktokd,
17 vline,
18 t_output1-kunnr,
29 vline,
30 t_output1-name1,
70 vline,
71 t_output1-katr1,
87 vline,
88 t_output1-land1,
96 vline,
97 t_output1-vkorg,
107 vline,
108 t_output1-kvgr1,
118 vline,
* DV4K934131-Start.
* 119 T_OUTPUT1-TTEXT,
120 t_output1-v_text,
* 150 VLINE.
255 vline.
* DV4K934131-End.
ENDLOOP.
WRITE:/1 sy-uline(255).
TOP-OF-PAGE.
IF p_upda = 'X'.
v_linsz = 255.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 vline,
2 text-h01, "'Sold to/Ship to'
17 vline,
18 text-h02, "'Customer#'
29 vline,
30 text-h03, "'Customer Name'
70 vline,
71 text-h04, "'Customer Status'
87 vline,
88 text-h05, "'Country'
96 vline,
97 text-h06, "'Sales Org.'
107 vline,
108 text-h07, "'EST Status',
118 vline,
119 text-h08, "'Change History',
* 150 VLINE.
255 vline.
FORMAT RESET.
WRITE:/1 sy-uline(255).
ENDIF.
Rob -
Problem with variables in formulas when using CrystalReportViewer
Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---AksuHas anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM -
Problem with direction in a page(??????)
Hi every body,
I have a problem with direction in some page when i change the language to Arabic(right to left language).
in some page like welcome page its completely true ,but in some page that i buile with my self (and add some portlet to it like :advanced search portlet)its directon does not appear properly,the label is appear in left, and text box appear in right(its not true).
what can i do??????????????????
please answer me :(This is not the right forum for your question. Try to post it in the Oracle Application Server Portal forum, or contact Oracle Support.
Peter -
Hi. I'm making a form for work for people to book places on
training courses. Having an annoying problem with variables that
i'm hoping has a simple solution. Any help with this will be much
appreciated.
All the info is held in an external text file which looks
like this (but much longer):
&totalcourses=2&
&course0=Please choose a course&
&course1=my course one&
&totaldates1=3&
&c1date0=Select a date...&
&c1date1=15 September 2006&
&c1time1=Time: 10:00 to 16:00&
&c1date2=23 January 2006&
&c1time2=Time: 11:00 to 16:00&
&c1date3=28 February 2007&
&c1time3=Time: 12:00 to 16:00&
&course2=my course 2&
&totaldates2=3&
&c2date0=Select a date...&
&c2date1=15 September 2006&
&c2time1=Time: 11:00 to 16:00&
&c2date2=08 January 2007&
&c2time2=Time: 9:00 to 16:00 &
&c2date3=15 February 2007
&c2time3=Time: 12:00 to 16:00&
The course titles are loaded into an array and then into a
combobox. When a course is chosen a second combobox loads the
relevant dates array for that course. When a date is chosen the
time is shown in a dynamic text box.
Problem is - if more than one course is on the same date it
will show the time for the latest course with that date. For
example - course 1 is on 15 sept at time 10:00 to 16:00, course 2
is also on 15 sept at time 11:00 to 16:00. When 15 Sept is chosen
for course one it displays the time for course 2 on this date -
presumably because it comes later in the text file.
I've attached the actionscript for this - Can anyone help me
sort this out??Hi. I'm making a form for work for people to book places on
training courses. Having an annoying problem with variables that
i'm hoping has a simple solution. Any help with this will be much
appreciated.
All the info is held in an external text file which looks
like this (but much longer):
&totalcourses=2&
&course0=Please choose a course&
&course1=my course one&
&totaldates1=3&
&c1date0=Select a date...&
&c1date1=15 September 2006&
&c1time1=Time: 10:00 to 16:00&
&c1date2=23 January 2006&
&c1time2=Time: 11:00 to 16:00&
&c1date3=28 February 2007&
&c1time3=Time: 12:00 to 16:00&
&course2=my course 2&
&totaldates2=3&
&c2date0=Select a date...&
&c2date1=15 September 2006&
&c2time1=Time: 11:00 to 16:00&
&c2date2=08 January 2007&
&c2time2=Time: 9:00 to 16:00 &
&c2date3=15 February 2007
&c2time3=Time: 12:00 to 16:00&
The course titles are loaded into an array and then into a
combobox. When a course is chosen a second combobox loads the
relevant dates array for that course. When a date is chosen the
time is shown in a dynamic text box.
Problem is - if more than one course is on the same date it
will show the time for the latest course with that date. For
example - course 1 is on 15 sept at time 10:00 to 16:00, course 2
is also on 15 sept at time 11:00 to 16:00. When 15 Sept is chosen
for course one it displays the time for course 2 on this date -
presumably because it comes later in the text file.
I've attached the actionscript for this - Can anyone help me
sort this out?? -
Problem with Variable Client Support
Hello,
I work with Labview 8.5 and Crio 9014.
I have a problem with Variable Client Support. When I try to compile my project I have the following error:
"The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
Can somebody help me?
ThanksI have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI...
The Network Variable Engine and Variable Client Support must be installed on the RT target
for this application to function properly. If the Network Variable Engine is not supported on
the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
to My Computer in the project. Doing this will deploy the variables to localhost but
will still require that Variable Client Support be installed on the RT target.
Could someone help please ?
Attachments:
ni.png 95 KB -
How to print header in first and last page only in SAPSCRIPT
Hi!
How to print header in first and last page only in SAPSCRIPT,
in between pages, I need to print all line items in MAIN window only .
Thanks in anticipation!
Aki.Hi All,
Thanks for your early update...but my requirement here is
I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
hope you this will clear you.
Thanks! -
Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.
Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.
-
After upgraded ios6 i got problem with whatapp. "last seen" function is not working
HI eveyone
after upgraded ios6 i got problem with whatapp. "last seen" function is not working .. it's doest show last seen who enter the chat . is anyone have the same problem .. i even restore and reinstall to my ph but it's not work .. if someone know how to fix it, plz tell me how to do .. thanksAlso, when I check this post several times a day, I always see warning 'Connection is untrust'. If I close browser and reopen immediately everything is ok.
-
I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.
Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.
Maybe you are looking for
-
IPhoto crashing so that I can't upload photos at all
Hi I recently updated iPhoto from the app store. I now have iPhoto 11 version 9.4.2 (710.42). Since then I cannot import photos at all! It lost my whole iPhoto library, and whenever I try to add photos, it tries to upload a few, and then "quits une
-
How can I get one song out of an entire concert w/o losing the entire show
I have edited an entire concert, 2 hours, and have uploaded it to Youtube but I also want to get one song out that to give to the band for promotional use. How can I get that one song out of the entire show and still keep the entire show intact? If I
-
Authentication for user weblogic denied seen in Weblogic 8.1 bea logs
I am observing the below error in bea logs of one of my managed servers. The managed server is in running state but the most of the Bridges are inactive with description "WARN: failed to connect to the source". Below is the error seen. ####<Mar 29, 2
-
Adobe Form (standard) how to set paper weight?
We realized an Adobe Form related to deliveries. The form is printed on a paper with the weight of 160g (which is the double of a normal paper). When the printer settings are put correctly to 160g the print out releases an error message. Apparently t
-
Transferred Roles not showing up in WP3R
Hi All, I have a BI 7.0 System which is connected with EP 7.0. I uploaded few roles from the BI System in the portal and made some changes to the uploaded role. Then i transferred these roles back to BI System from the portal using role tra