Problem with variable refresh in WAD

Hi Experts,
I have a query in which currency and cal quarter are the variables. The cal quarter is populated using a customer exit to have the current quarter. I have built a webtemplate on this query. Now the problem is:When I run the webtemplate and try to change the currency value (for example EUR to CAD) and select show all values for the cal quarter, i see that the cal quarter is being reset to the default value i.e (current quarter). When i pass a value (say 2.2008) to the cal quarter in the variable screen or in the characteristic restictions in the webtemplate and try to change the currency in the currency drop down, the cal quarter remains same (2.2008) and the keyfigures are displayed with the selected currency.
Could you provide some inputs so that the cal quarter value is not reset upon selection of "show all values" in the variable screen/drop down and change in currency.
P.S. No changes at query level are allowed and both query and webtemplate are in 7.0
Regards,
Naveen.

HI Naveen,
WHere is the customerr Exit of the calquarter used in teh Query. is it in the Filter section or in teh Default values section.
If the customer Exit variable is used in teh filter section , you will not be able to see data other than the value returned by the customer exit.
Regrads.
Shafi.

Similar Messages

Problem with Variable screen in WAD

Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Problem with variables in formulas when using CrystalReportViewer

Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---Aksu

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

Problem with variable

Hi. I'm making a form for work for people to book places on
training courses. Having an annoying problem with variables that
i'm hoping has a simple solution. Any help with this will be much
appreciated.
All the info is held in an external text file which looks
like this (but much longer):
&totalcourses=2&
&course0=Please choose a course&
&course1=my course one&
&totaldates1=3&
&c1date0=Select a date...&
&c1date1=15 September 2006&
&c1time1=Time: 10:00 to 16:00&
&c1date2=23 January 2006&
&c1time2=Time: 11:00 to 16:00&
&c1date3=28 February 2007&
&c1time3=Time: 12:00 to 16:00&
&course2=my course 2&
&totaldates2=3&
&c2date0=Select a date...&
&c2date1=15 September 2006&
&c2time1=Time: 11:00 to 16:00&
&c2date2=08 January 2007&
&c2time2=Time: 9:00 to 16:00 &
&c2date3=15 February 2007
&c2time3=Time: 12:00 to 16:00&
The course titles are loaded into an array and then into a
combobox. When a course is chosen a second combobox loads the
relevant dates array for that course. When a date is chosen the
time is shown in a dynamic text box.
Problem is - if more than one course is on the same date it
will show the time for the latest course with that date. For
example - course 1 is on 15 sept at time 10:00 to 16:00, course 2
is also on 15 sept at time 11:00 to 16:00. When 15 Sept is chosen
for course one it displays the time for course 2 on this date -
presumably because it comes later in the text file.
I've attached the actionscript for this - Can anyone help me
sort this out??

Hi. I'm making a form for work for people to book places on
training courses. Having an annoying problem with variables that
i'm hoping has a simple solution. Any help with this will be much
appreciated.
All the info is held in an external text file which looks
like this (but much longer):
&totalcourses=2&
&course0=Please choose a course&
&course1=my course one&
&totaldates1=3&
&c1date0=Select a date...&
&c1date1=15 September 2006&
&c1time1=Time: 10:00 to 16:00&
&c1date2=23 January 2006&
&c1time2=Time: 11:00 to 16:00&
&c1date3=28 February 2007&
&c1time3=Time: 12:00 to 16:00&
&course2=my course 2&
&totaldates2=3&
&c2date0=Select a date...&
&c2date1=15 September 2006&
&c2time1=Time: 11:00 to 16:00&
&c2date2=08 January 2007&
&c2time2=Time: 9:00 to 16:00 &
&c2date3=15 February 2007
&c2time3=Time: 12:00 to 16:00&
The course titles are loaded into an array and then into a
combobox. When a course is chosen a second combobox loads the
relevant dates array for that course. When a date is chosen the
time is shown in a dynamic text box.
Problem is - if more than one course is on the same date it
will show the time for the latest course with that date. For
example - course 1 is on 15 sept at time 10:00 to 16:00, course 2
is also on 15 sept at time 11:00 to 16:00. When 15 Sept is chosen
for course one it displays the time for course 2 on this date -
presumably because it comes later in the text file.
I've attached the actionscript for this - Can anyone help me
sort this out??

Problem with Variable Client Support

Hello,
I work with Labview 8.5 and Crio 9014.
I have a problem with Variable Client Support. When I try to compile my project I have the following error:
"The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
Can somebody help me?
Thanks

I have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI...
The Network Variable Engine and Variable Client Support must be installed on the RT target
for this application to function properly. If the Network Variable Engine is not supported on
the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
to My Computer in the project. Doing this will deploy the variables to localhost but
will still require that Variable Client Support be installed on the RT target.
Could someone help please ?
Attachments:
ni.png ‏95 KB

Problem with variable in the woorkbook selection screen.

Hi All,
I have Problem with Variable in the selection screen. I have four variable in the report in this sequence
<b>Plant (optional), calendar month (mandatory), material (optional), Customer (mandatory). </b>
In Development system, I changed the query to fix the problem for a formula. saved and executed the query. In the selection screen appeared four variables and executed. after executing the query and I saved the work book also. I logged out of the Bex Analyzer. In the RSRT I generated the report by clicking the Generated Report push button. and again logged into the Bex analyzer and ran the work book, now in the selection screen, appeared three Variables only, I am missing the variable <b>Customer</b>.
The old report which is already in the Production system is working fine. What could be the mistake I did in the development system.
It is very urgent, I need to deliver this object as soon as possible.
Can I anybody help on the same.
Thanks in advance
Narendra

Yunus,
I did what you said. I removed the variable from characteristic restrictions, saved the query and executed the query, appeared three variables Plant, Calender month and material. executed and saved the work book. disconeted from Bex analyzer, in RSRT Generated Report and logged into Bex analyzer ran the work book for selection Plant, calender month and material and went into change query definition and added the variable for customer which was removed earlier and and ran the query for selections Plant, Calender monmth, Material and customer. saved the work book. disconnected from Bex analyzer and closed all excel sheets and work books. In RSRT Generated Report and again connected to Bex analyzer and ran the work book, now appeared only three variables again missed variable customer.
Yunus does any missed n the procedure what i did.
It is helped what Chris was answered.
Many Many Thaks for your time and replies.
Thaks in advance
Narendra

Problem with Information button in WAD

Dear Mates,
I have a problem with Information button in WAD template.
I have two queries in web template. those two queries are in two tabs( i used Tabstrip ) respectively.
if i press first tab it shows query1 and if i press second tab it shows query2 absolutely.
problem
when i am in first tab, if i click information it will show information about query1, but when i am in second tab,
if i click information it will show information about query1 only..
i need it to show information about second tab.
Please help. Its urgent. Full Reward points will be given.
Thanks in advance.
Regards,
Ranganath

check out this link
http://www.mhprofessional.com/downloads/products/0071640266/0071640266_chap01.pdf

NMac Pro 6core D500 problems with screen refresh: 10.9.3 warning!

Avoid 10.9.3 on the Mac Pro 6 core, D500.
Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
I would suggest not upgrading unless you have a 4k monitor.

Avoid 10.9.3 on the Mac Pro 6 core, D500.
Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
I would suggest not upgrading unless you have a 4k monitor.

Localizing Analytics Web Catalog - problem with variables

I tried to localize strings in OBI EE Web Catalog. I exported those captions using catalog manager, translate messages in XML file and put them to \Web\Res\l_xx\Captions. It works quite good.
But there is problem with variables in Title. Replacement of variables STOP working :-( At the page is displayed for example: "@{biServer.variables['MaxDate']}". Variable replacemen works fine in narrative views.
Do you have some ideas?
Thanks.

We have the same problem with presentation variables in titles using externalize strings option, they stopped working after tranlation.
We tried with Oracle BI EE 10.1.3.2.1 and 10.1.3.3.3 with same result.
Any ideas?
Thanks

Problems with variable speed

problems with clips switching from constant to variable speed.

Could you be more specific? What are you doing exactly and what is happening when you do it? Which version of FCP?

Problem with variable offset for 0CALMONTH

Hello Community,
I have a problem with using variables offset for time characteristic 0CALMONTH
Let's say my current query looks like this:
...................01.2006..........02.2006..........03.2006   (0CALMONTH)
Sales ..............100..................125................200   (Keyfigure)
What I want do now is to add a previous year comparison. So that it should look this way:
...................01.2006..........02.2006..........03.2006   (0CALMONTH)
Sales ..............100..................125................200   (selected months)
LY_Sales...........50..................100................100   (selected months - 12)
(LY_Sales should show figures of 01.2005, 02.2005 and 03.2006 in this example)
I used new selection for LY_Sales with variable offset for 0CALMONTH -12 but that didn't work. Figures in second line are zero. The desired figures would show up (if I expand the selected time intervall wide enough) in 01.2005, 02.2005 and 03.2005 but that's of course not what I want.
Please help if you can!
Regards,
Ulrich

Hi,
We can get an an other way by using CELL editor caoncept.
First create teh query like this:
...................01.2006..........02.2006........12.2006.....01.2005...02.20005...12.2005 Sales ..............100................125..............200.............50...........100.........100
Sales ..............100................125..............200.............50...........100.........100
Then hide the 2005 years' kf:
...................01.2006..........02.2006........12.2006
Sales ..............100................125..............200
Sales ..............100................125..............200
Though the call editor concept overwrite the second rows(selection) content with hidden columns of second row(selection) one by one .i.e first cell of 2nd row will be overwritten by 13 th cell of second column.similarly second cell of 2nd row will be overwritten by 14 th cell of second column........
First row(selection) : Cal year Charactertic with restriction 2006.
second row(selection) : Cal year Charactertic with restriction 2005.
With rgds,
Anil Kumar Sharma .P

Problem with variable name in ZXRSRTOP include (virtual KF)

Hi all,
I am coding a routine to use a virtual key figure in the BEx.
I have just a little problem with the name of a variable:
as explained in the documentation, I created the variable with the prefix G_POS_, the name of the infocube and the name of the infoobject all together:
DATA: G_POS_BC_ST_003_C_DIV__C_COMPAR type i.
The problem is that this variable name is longer than 30 characters, so the system doesn't accept it.
Is there a workaround, other than changing the name of the infoobject (which is a navigational attribute)?
Any help would be appreciated.
Loï

Hello Marc,
I understand that I have to use a concatenate function and a dynamic call of the variable with (variable) instruction, but i do not understand how to implement it.
the infocube name is BC_ST_003
the characterisdtic name is C_DIV__COMPAR
So, in the include ZXRSRTOP the statement
DATA : G_POS_BC_ST_003_C_DIV__COMPAR
does not work due a length problem (see first post)
But in the same include the statement
+DATA: l_global_name type c.
concatenate 'GPOS' 'BC_ST_003' 'C_DIV__C_COMPAR' into l_global_name separated by '_'.+
drives to the following error : statement is not accessible.
Could u please provide me with an example of the code in the include ZXRSRTOP, and in the include ZXRSRZZZ for the use of this variable.
Thanks in advance.
Loï

Problem with Variable Entry Screen

Hello All,
We upgraded our development systems to NW2004s and came across the following issue:
All our Bex queries have restricted time characteristics with variables entries. When we execute a query it should pop-up the variable selection screen for us to enter the restriction values but the query is ignoring Variable restriction screen and taking into consideration everything. The same query works fine in Prod., which is still in 3.1.
Did anyone come across this situation kind of situation? It did not pop-up any type of error and we are in SPS10
Thanks in Advance,
Message was edited by:
bw expert online
Message was edited by:
bw expert online

We fixed the "Variable Screen not appearing" problem by adding following objects to our users.
1) Business Explorer - BEx Web Templates (NW 7.0+) S_RS_BTMP
2) Business Explorer - Individual Tools S_RS_TOOLS
3) Business Explorer - Data Access Services S_RS_DAS
Mark the message answered if this helps.

Problem with ATV refresh rates and frame rates

I live in Australia and as such I am subject to PAL, so when I set my ATV up I set it to 720P 50Hz, when I purchased a TV season the episodes were running at 25fps and played back flawlessly with no dropped or added frames. My problem occurs when I download movies, all the movies I have bought are running at 24fps and suffer from quite noticeable jitter, almost like the 24th frame is duplicated and added as the 25th frame, I assume it is something like this as the pause happens every second.
So has anyone had a problem similar to this and if so what do you do about it?
Does the ATV playback all sources (24/25) smoothly even if it has to convert?
Could it be caused by my TV?
Any help to any of these questions would be great.
Thanks.
Tim.

With my particular Apple TV setup and TV combination, I find that setting to 1080p (60hZ) gives my the best all-round round results.
This does result in -slightly- jerky motion with 25fps material (especially old British TV shows), but it's bearable. It's particularly noticeable with sideways scrolling text and credits.
The one thing that is peculiar on my setup is if I use 720p (either @60hz or 50hz) and watch an iTunes-purchased HD episode that is encoded at 24fps I get very odd motion effects indeed. Every few seconds the video appears to speed up almost like it is 'catching up' with lost frames - very hard to explain exactly how it looks. Anyway I set to 1080p and this effect is gone completely. It also goes away if I set to 1080i. I think something queer is going on with 720p on the Apple TV (at least with my TV there is). This happens with both HDMI and component outputs.
It may be worth trying 1080i at either 50 or 60Hz if your set can't do 1080p.
I would also suggest that 60hz in theory should give a smoother motion for 24fps playback than 50Hz.
My basic problem with all this is that on even a cheap DVD player if a disk is 50Hz, the player switches to 50Hz output and if it is 60Hz, it will change to 60Hz. The Apple TV stays fixed. It's a shame it can't autoswitch refresh rates.

Problem with variable substitution.

Hello,
I asked this before but now I want to change the question focus.
I have scenario from IDOC to XML file.
The scenario is digital invoice for our company in Mexico and I end this scenario with java mapping that I import from SAP marketplace.
Now I have request to add to the XML file name the content of the field "<ODN_NUMBER>" from the XML data.
I try to use with variables substitution.
My payload is:
<?xml version="1.0" encoding="UTF-8" ?>
- <ZINVOIC02>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>400</MANDT>
<DOCNUM>0000000006599015</DOCNUM>
<DOCREL>700</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>INVOIC02</IDOCTYP>
<CIMTYP>ZINVOIC02</CIMTYP>
<MESTYP>INVOIC</MESTYP>
<STDMES>ZEDI</STDMES>
<SNDPOR>SAPDEV</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>DEV400ECC</SNDPRN>
<RCVPOR>SAPDEV</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPFC>LS</RCVPFC>
<RCVPRN>MX_INV</RCVPRN>
<CREDAT>20100118</CREDAT>
<CRETIM>075931</CRETIM>
<SERIAL>20100118075931</SERIAL>
</EDI_DC40>
- <E1EDK01 SEGMENT="1">
<CURCY>USD</CURCY>
<HWAER>MXN</HWAER>
<WKURS>10.55530</WKURS>
<ZTERM>0090</ZTERM>
<KUNDEUINR>ACH971209KRA</KUNDEUINR>
<BSART>INVO</BSART>
<BELNR>0100017295</BELNR>
<BRGEW>0.045</BRGEW>
<GEWEI>KGM</GEWEI>
<FKART_RL>LR</FKART_RL>
<RECIPNT_NO>0000012977</RECIPNT_NO>
<FKTYP>L</FKTYP>
- <Z1EDK01 SEGMENT="1">
<XML_VERSION>2.0</XML_VERSION>
<ODN_PREFIX>A</ODN_PREFIX>
<ODN_NUMBER>1883</ODN_NUMBER>
<DATE_TIME>2009-11-01T17:05:10</DATE_TIME>
<DOC_SUB_TOTAL>4.22</DOC_SUB_TOTAL>
<DOC_DISCOUNT>3.00</DOC_DISCOUNT>
<DOC_TOTAL>1.40</DOC_TOTAL>
</Z1EDK01>
And the xml that I create is:
<?xml version="1.0" encoding="utf-8" ?>
- <Comprobante xmlns="http://www.sat.gob.mx/cfd/2" version="2.0" serie="A" folio="1883" fecha="2009-11-01T17:05:10" sello="NxZCWU8hMJMiEc2fSZafpS81Z9rUScbBotvJ8lcW76GGpmcD2lFyAV7DlNQKecYMnQJnwMVoHfGjzhpFJrjLuRcyqU3nOnH1mE1JMxY/MjLkal0Ybo2aRKCorQxx+F/Vy5ucvyeDDFAt2gx0PeHJhFS3tJ6ssc6nryz3iUr8c=" noAprobacion="49806" anoAprobacion="2009" formaDePago="Pago en una sola exhibiciףn" noCertificado="00001000000100891274" condicionesDePago="90 DAYS FROM BILL OF LADING" subTotal="4.22" descuento="3.00" motivoDescuento="Customer DiscountCustomer Discount" total="1.40" tipoDeComprobante="ingreso">
- <Emisor rfc="NMS940324RY6" nombre="Netafim Mexico S.A. de C.">
<DomicilioFiscal calle="Leibnitz" noExterior="20" noInterior="901" colonia="Anzures" localidad="Mexico city" municipio="Miguel Hidalgo" estado="Distrito Federal" pais="Mexico" codigoPostal="11590" />
</Emisor>
- <Receptor rfc="ACH971209KRA" nombre="AGRICOLA 5 HERMANOS SA DE CV">
<Domicilio calle="JUAN DE LA BARRERA NO 1249 NORTE" localidad="COL. CHAPULTEPEC" municipio="CULIACAN" estado="Sinaloa" pais="Mexico" codigoPostal="80040" />
</Receptor>
- <Conceptos>
I try to use with this variable:
payload:ZINVOIC02,1,IDOC,1,E1EDK01,1,Z1EDK01,1,ODN_NUMBER,1
I received in RWB the error:
Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: var_filename
Thank you in advance for your help
Elad

But my target is looks very strange:
<?xml version="1.0" encoding="utf-8" ?>
- <Comprobante xmlns="http://www.sat.gob.mx/cfd/2" version="2.0" serie="A" folio="1883" fecha="2009-11-01T17:05:10" sello="NxZCWU8hMJMiEc2fSZafpS81Z9rUScbBotvJ8lcW76GGpmcD2lFyAV7DlNQKecYMnQJnwMVoHfGjzhpFJrjLuRcyqU3nOnH1mE1JMxY/MjLkal0Ybo2aRKCorQxx+F/Vy5ucvyeDDFAt2gx0PeHJhFS3tJ6ssc6nryz3iUr8c=" noAprobacion="49806" anoAprobacion="2009" formaDePago="Pago en una sola exhibiciףn" noCertificado="00001000000100891274" condicionesDePago="90 DAYS FROM BILL OF LADING" subTotal="4.22" descuento="3.00" motivoDescuento="Customer DiscountCustomer Discount" total="1.40" tipoDeComprobante="ingreso">
- <Emisor rfc="NMS940324RY6" nombre="Netafim Mexico S.A. de C.">
<DomicilioFiscal calle="Leibnitz" noExterior="20" noInterior="901" colonia="Anzures" localidad="Mexico city" municipio="Miguel Hidalgo" estado="Distrito Federal" pais="Mexico" codigoPostal="11590" />
</Emisor>
- <Receptor rfc="ACH971209KRA" nombre="AGRICOLA 5 HERMANOS SA DE CV">
<Domicilio calle="JUAN DE LA BARRERA NO 1249 NORTE" localidad="COL. CHAPULTEPEC" municipio="CULIACAN" estado="Sinaloa" pais="Mexico" codigoPostal="80040" />
</Receptor>
I need to add folio field
Elad

Problem with variable refresh in WAD

Similar Messages

Maybe you are looking for