Problem with vendor address number in LFA1/ADRC

Hi,
We've had a really strange problem occur and we can't find out how it happened. We have two vendors who have somehow started to share the same address number in ADRC (field LFA1-ADRNR contains the same value for both vendors). Both vendors are old and have been on our system for a few years.
We use SRM but I'm told the master data is maintained in R/3 4.7 (although it is possible to maintain it in SRM, we don't use that process).
Can anyone suggest how this could have happened, and moreover, how we can change the address number on one of the vendors to point elsewhere. We can't find any transaction and LFA1 isn't maintainable in SE16.
Really appreciate any help that anyone can offer!
Regards,
Angela

Our addresses should be unique. I've downloaded table LFA1 and we only have two vendors which share the same adress number - and this is an error.
The problem with sharing the address number is if we try to change the address for vendor 1, then the same change applies to vendor 2. This is not correct.
Is it possible that two vendors have somehow become linked like parent and child? Can anyone explain how this could have happened and how we can undo it?
Thanks,
Angela.

Similar Messages

No batch input problem with Vendor master Upload

Hi All,
I am getting a problem with Vendor Master upload conversion. We have'nt change the code and configuration but when i try to run the code today its giving an error for particular Account group. I run this code yesterday and its work fine with that particluar Account group. But i am getting an error when i run the code today. The error is as follows "No batch input data for screen SAPMF02K 0610".When i got through the code i have'nt find that screen number.
Can anyone suggest how to resolve that problem.

Double click on the session name in SM35 and click on the screens tab there you can find the screen number.
process the same session in foreground mode and see if you are getting the same error.
If so, the new screen number you got is due to some change in the settings some where, show the new screen to Your Functional guy and he can help you.
There is one more chance where some data is missing in the flat file, just check it out.
Reward points if usefull.
Thanks ,
Veeru.

Problem with Vikings Mobile number (Poland)

[Topic title updated by moderator to be more descriptive. Original topic title was: "Problem with Vikings Mobile number"]
Hello, I can't login Skype Qik for Windows Phone with Vikings Mobile country: Poland. Still getting msg wrong Phone number when try to login. On android i can login without any problems.

Hi, can you specify the first 5 digits of the phone number? For example +48 xxx
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены

I am living in moscow, but i have a mastercard in vietnam. I changed my location in itunes from Russia into Vietnam. But when I change my billing info, and write my card's informations. It said I have problems with the address. I typed my address in VN.

I am living in moscow, but i have a mastercard in vietnam. I changed my location in itunes from Russia into Vietnam. But when I change my billing info, and write my card's informations. It said I have problems with the address. I typed my address in VN. What should I do now ????

To answer the second question first, the owners of the music (and that is not Apple) decide where their music can be sold. If they decide (for whatever reason) not to sell their music in a particular country, they will not let a music retailer (that is Apple this time) sell it in that country. So the "system" is beyond Apple's control.
As for your first post; (if I understand you correctly), the iTunes Store knows that you are in Russia, so using a credit card registered in Vietnam is simply going to look like you're trying to get round the system.
The credit card is tied to an address, and therefore to a country. Simply using a different country's address is not going to work.
By the way, this is a world-wide situation. It's not a matter of having to use a Russian card, whatever card you use has to be registered at an address in Russia.
Use the support link in the iTunes Store to contact Apple and see if you can straighten out whether you can buy songs, where ever you are and with whichever card you have.

Strange Problem with Mail & Address Book

Hi,
I'm having a strange problem with Mail & Address Book.
When I go to compose a new message from Mail and hit the Address button (to show my email addresses), it won't launch the contacts window!
I get this log from console;
2007-10-15 22:55:59.079 Mail[410] * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)
If I try to launch the Address Book from my Applications folder, it won't open, and it gives me this log from console;
2007-10-15 22:57:57.348 Address Book[417] * -[NSKeyedUnarchiver initForReadingWithData:]: data is NULL
Oct 15 22:57:57 PB-G4 /Applications/Address Book.app/Contents/MacOS/Address Book: CGImageSourceCreateWithData data parameter is nil\n
2007-10-15 22:57:57.350 Address Book[417] Don't know about packed image EditLeftCapStd
2007-10-15 22:57:57.350 Address Book[417] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray addObject:]: attempt to insert nil
If I quit Address Book, i'll get this from console;
2007-10-15 22:58:37.892 Address Book[417] -[ABAddressBook setDefaultCountryCode:] called with a unknown country code 'us'
I tried deleting the preferences, re-installing Address Book, also tried creating a new user, again no luck!
Can somebody help!!!
Please?!

Hi dp13.
Do you have any Address Book plug-ins or system utilities that could interfere with Address Book? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/Address Book Plug-Ins/
~/Library/Address Book Plug-Ins/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/Address\ Book\ Plug-Ins ~/Library/Address\ Book\ Plug-Ins
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.
<hr>
Did you also reinstall the appropriate Combo Update after reinstalling Address Book?
Quit all the applications and verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.10 Combo Update
Mac OS X 10.4.10 Combo Update for PowerPC
Mac OS X 10.4.10 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Problem with reached maximum number of connections to database

Dear Experts,
Our Production system was not responding properly last week.
The below was the reply from the Basis team.
"It seems that we have again problem with reached maximum number of connections to database. We have extended this number to 100 this year and now it seems that it’s not enough again. It seems that something is running on Production, which takes over too many connections."
They have increased the number to 200 as a work around.
Do we have any means to find out, which component or application is causing the issue.
Please advise me if any better way is available to correct the issue.
Please see the below trace.
From default trace:
======
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.R
esourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to DB or EIS is reached. You
can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable. 3) Connections ar
e not enough for current load.
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:60)
        at com.sap.security.core.persistence.datasource.imp.J2EEConnectionPool.getConnection(J2EEConnectionPool.java:205)
        ... 61 more
Caused by: javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to
DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unr
eachable. 3) Connections are not enough for current load.
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:230)
        at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:343)
        at com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
        at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:52)
        ... 62 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException is thrown by the pooled connection: com.sap.sql.log.OpenSQLException: No c
onnection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are currently waiting. The connection pool size might
need to be adjusted.
        at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:192)
        at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:221)
        ... 65 more
Caused by: com.sap.sql.log.OpenSQLException: No connection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are
currently waiting. The connection pool size might need to be adjusted.
======
Thanks and Kind Regards,
Jelbin

Stop all instances(including DB) and start again, Hope it should work.
It may happened that jar has not been synchronized with the database and may be version mismatch with the java.
719778 - Data Source fails to return connection
1650472 - Transactions are interrupted due to database connection periodically failing to establish
1138877 - How to Deploy External Drivers JDBC/JMS Adapters
Change the connection pool so that it can connect to DB as per the note 719778
Regards
Vijay Kalluri

Problem with material master number range

Hi,
we have a problem with the material number range when stop the transaction of creation a material master data (MM01) the system has a jump of number range.
Example -> while creating a new material master the system gives me a number preview (46) but if I stop the transanction without save the master data the system doesn't give me the number 46 in the next master data but give me the next number 8in this example 47).
It there a way for not have this jump of number range?
Thanks!
Gaetano

Hi Gaetano,
This ia a standard thing..even I have experienced it.
Regards,
Chiranjib

Mail has problem with auto address.

My mail recently has had a problem with auto addressing. Sometimes it fills in the address, at other times it will not. I have checked mail preferences often...making sure auto-address is on. I CAN use the address book to click on an address when auto addressing doesn't work. Mail is also quirky about quitting and sometimes preferences have to be re-edited to send. Basically, it is behaving badly. What to do? Thanks ACE

My mail recently has had a problem with auto
addressing. Sometimes it fills in the address, at
other times it will not. I have checked mail
preferences often...making sure auto-address is on. I
CAN use the address book to click on an address when
auto addressing doesn't work. Mail is also quirky
about quitting and sometimes preferences have to be
re-edited to send. Basically, it is behaving badly.
What to do? Thanks ACE
Later...12/03. Autofill not working with mail or safari. Autofill icon, when touched says something like...autofill has no infomation. this is weird, since it had been working nicely for 2.5 years. I've tried everything I could think of. Need a pro's help...MNICE

Hi I have a problem with my licence number for Lightroom

Hi I have a problem with my licence number for Lightroom, has been forced to re-install lightroom again but, have downloaded a trial version of adobe but now works license number are not, there are some who can help me with what is going wrong. Thanks Henrik

Download Lightroom 5 from Product updates and install, use your serial number

Problem with IN OUT Number, OUT RefCursor for EF Model StoredProcedure call

When I call a stored procedure using the EF Model and implicit binding via App.config which has three parameters i.e. 'IN Number', 'IN OUT Number' and 'OUT sys_refcursor', the 'IN OUT Number' is not set correctly on return from the procedure.
The 'IN OUT Number' is for an error code and is set to 12345 on input and is then set to 54321 by stored proceedure for return.
The correct value is returned when the call is via OracleCommand using implicit binding via App.config but remains unchanged when the call is via EF Model and implicit binding via App.config.
The ODP documentaion says you cannot have two OUT RefCursors when using EF Model but does not say you cannot have OUT RefCursor and other non-RefCursor OUT parameters.
The idea behind this type of procedure is to have multiple input parameters to configure and filter the stored procedure and an output result set that consists of an error code and a collection of result rows in a RefCursor.
I am using 11g R2 database and ODP 11g Release 2 (11.2.0.2.30) and ODAC Entity Framework beta.
The query uses Scott/tiger schema with parameters department code, error code and list of employees for department.
code:
PROCEDURE TEST_PARAMETERS
DEPT IN NUMBER,
ERROR_CODE IN OUT NUMBER,
DEPT_EMPLOYEES OUT sys_refcursor
AS
BEGIN
DBMS_OUTPUT.PUT_LINE('DEPT = [' || DEPT || ']');
DBMS_OUTPUT.PUT_LINE('ERROR_CODE = [' || ERROR_CODE || ']');
OPEN DEPT_EMPLOYEES for SELECT empno, ename from emp where deptno = DEPT;
-- set ERROR_CODE for return
ERROR_CODE := 54321;
END TEST_PARAMETERS;
The App.config for implicit RefCursor binding is as follows ...
<oracle.dataaccess.client>
<settings>
<add name="SCOTT.TEST_PARAMETERS.RefCursor.DEPT_EMPLOYEES"
value="implicitRefCursor bindinfo='mode=Output'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.0"
value="implicitRefCursor metadata='ColumnName=EMPNO;
          BaseColumnName=EMPNO;BaseSchemaName=SCOTT;BaseTableName=EMP;
          NATIVE_DATA_TYPE=number;ProviderType=Int32;
          PROVIDER_DB_TYPE=Int32;DataType=System.Int32;
          ColumnSize=4;NumericPrecision=10;
               NumericScale=3;AllowDBNull=false;IsKey=true'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.1"
value="implicitRefCursor metadata='ColumnName=ENAME;
          BaseColumnName=ENAME;BaseSchemaName=SCOTT;BaseTableName=EMP;
          NATIVE_DATA_TYPE=varchar2;ProviderType=Varchar2;
          PROVIDER_DB_TYPE=String;DataType=System.String;
          ColumnSize=10;AllowDBNull=true'" />
</settings>
</oracle.dataaccess.client>
When the call is via OracleCommand both outputs are correct i.e. ERROR_CODE gets set to 54321 and the correct emplyees for department 10 are returned
code:
private void TestParametersViaOracleCommand()
try
string constr = "DATA SOURCE=ORCL;PASSWORD=tiger;PERSIST SECURITY INFO=True;USER ID=SCOTT";
OracleConnection con = new OracleConnection(constr);
con.Open();
OracleCommand cmd = con.CreateCommand();
OracleDataAdapter adapter = new OracleDataAdapter(cmd);
DataSet ds = new DataSet();
cmd = con.CreateCommand();
cmd.CommandText = "SCOTT.TEST_PARAMETERS";
cmd.CommandType = CommandType.StoredProcedure;
cmd.BindByName = true;
OracleParameter dept = cmd.Parameters.Add("DEPT",
OracleDbType.Int32,
ParameterDirection.Input);
dept.Value = 10;
OracleParameter errorCode = cmd.Parameters.Add("ERROR_CODE",
OracleDbType.Int32,
ParameterDirection.InputOutput);
errorCode.Value = 12345;
// RefCursor output parameter implicitly bound via App.Config
adapter = new OracleDataAdapter(cmd);
adapter.Fill(ds);
// should be 54321 and is ...
Console.WriteLine("after call errorCode.Value = " + errorCode.Value);
Console.WriteLine("list size = {0}", ds.Tables[0].Rows.Count);
// only one table
DataTable deptEmployeesTable = ds.Tables[0];
for (int ii = 0; ii < deptEmployeesTable.Rows.Count; ++ii)
DataRow row = deptEmployeesTable.Rows[ii];
Console.WriteLine("EMPNO: " + row[0] + "; ENAME: " + row[1]);
catch (Exception ex)
// Output the message
Console.WriteLine(ex.Message);
if (ex.InnerException != null)
// If any details are available regarding
// errors in the app.config, print them out
Console.WriteLine(ex.InnerException.Message);
if (ex.InnerException.InnerException != null)
Console.WriteLine(
ex.InnerException.InnerException.Message);
output:
before call errorCode.Value = 12345
after call errorCode.Value = 54321 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
However when call is via EF Model the correct employees are returned but the ERROR_CODE parameter is unchanged on return.
code:
private void TestParametersViaEFModel()
var context = new ScottEntities();
Decimal dept = 10;
ObjectParameter errorCodeParameter = new ObjectParameter("ERROR_CODE", typeof(decimal));
errorCodeParameter.Value = 12345;
Console.WriteLine("before call errorCodeParameter.Value = " + errorCodeParameter.Value);
// RefCursor output parameter implicitly bound via App.Config
var queryResult = context.TestParameters(dept, errorCodeParameter);
// should be 54321 and is ...
Console.WriteLine("after call errorCodeParameter.Value = " + errorCodeParameter.Value + " (should be 54321!)");
List<TestParameters_Result> deptEmployeesList = queryResult.ToList();
Console.WriteLine("list size = {0}", deptEmployeesList.Count);
for (int ii = 0; ii < deptEmployeesList.Count; ++ii)
TestParameters_Result result = deptEmployeesList[ii];
Console.WriteLine("EMPNO: " + result.EMPNO + "; ENAME: " + result.ENAME);
output:
after call errorCodeParameter.Value = 12345 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
errorCodeParameter.Value IS NOT CORRECTLY RETURNED!
If there is no RefCursor then both outputs are identical i.e. the parameters are being passed in correctly and the problem is not with the 'IN OUT' parameter. Also same thing is true if ERROR_CODE is made an OUT parameter. Also tried changing the position of the parameter in the list but still get same problem i.e. works when OracleCommand but not when EF Model. Also note that the RefCursor results are correct for both types of call i.e. it is just a problem with the value of the 'IN OUT ERROR_CODE' parameter.
I have also enabled debug stepping from Visual Studio 2010 into Oracle PL/SQL as described in
"http://st-curriculum.oracle.com/obe/db/hol08/dotnet/debugging/debugging_otn.htm"
and have verified by inspection that the correct values are being passed into the stored procedure and that the stored procedure is definitely setting the ERROR_CODE to 54321 prior to return.
Most of our stored procedures have these type of parameters i.e. several IN params to configure the work of the stored procedure, an OUT NUMBER parameter for the Error_Code if any and a RefCursor for the result list.
Is this a bug or a feature? Am I doing something wrong?

Just to clarify ....
If the ERROR_CODE parameter is made an 'OUT' parameter instead of an 'IN OUT' parameter the correct return value is given for the OracleCommand invocation but the WRONG value is still returned for the EF Model invocation i.e. just changing the parameter from 'IN OUT' to just 'OUT' does not fix the problem.

Problem with file address

Hi,
I have a problem with my java program I wrote:
On my computer it works fine, because the file I use in the code has an absolute address to an specific place on my hard drive:
public static final File kombinace = new File("D:\\Documents\\NetBeansProjects\\spalicky\\src\\spalicky\\kombinace.txt");but I need to send the source files to another person ( my teacher ) and I need the code to work on his computer too...
do you have any idea how to edit the code to fix this problem???
I thought maybe be the relative address to the file or some including of the file like a resource might work but I dont not how to do this or if its even possible ..
thank for every reply

ondra wrote:
First at all, thanks a lot for your reply :) ,
It is read-only file ...
So you meant write the code like this ?
InputStream stream = getClass().getResourceAsStream("/kombinace.txt");
Yes, somewhere in your code when you need to read it you do something like the above, assuming kombinace.txt lives in one of your classpath roots. For example, if your code and that file are jarred up, then the above code would work if the file were in the root of the jar.
public static final File kombinace = new File(stream);No. Get rid of this - don't deal with it as a File anymore.

Problem with field "batch number" and table "et_item" at BBP_CONF_CHANGE

Hi experts!,
I have a problem when I use the badi BBP_DOC_CHANGE_BADI and with the method BBP_CONF_CHANGE.
I want to fill the field "batch number" at web SRM with the PO number, I thought to write it at suitable or appropriate field at table "et_item" but this table has not any similar field which I can write it.
Thanks in advance.
Best Regards.

Hello,
we cannot fill the BATCH field because it is not available in the table ET_ITEM in the method BBP_CONF_CHANGE.
Do you know how can we fill a default value in this field when the user is creating or modifying a confirmation item?
Thank you.
Best regards.

Strange problem with nested address book groups

I have a strange problem with iSync. I have created a group On-the-Go in my Address Book that I'm syncing with my phone (Motorola v600). The group consists of three other groups. Let's call them A, B and C.
The problem is that only group C gets synchronized. Contacts from groups A and B disappear from the phone. Strangely, if I select A or B to sync in iSync - they get synchronized just fine. Also, group C, in turn, contains other nested groups, but that does not seem to be a problem.
I played with group names, tried to recreate group A to no avail.
For now, I have added all contacts from A and B to On-the-Go as a workaround, but
it looks like a bug to me.

I have a strange problem with iSync. I have created a group On-the-Go in my Address Book that I'm syncing with my phone (Motorola v600). The group consists of three other groups. Let's call them A, B and C.
The problem is that only group C gets synchronized. Contacts from groups A and B disappear from the phone. Strangely, if I select A or B to sync in iSync - they get synchronized just fine. Also, group C, in turn, contains other nested groups, but that does not seem to be a problem.
I played with group names, tried to recreate group A to no avail.
For now, I have added all contacts from A and B to On-the-Go as a workaround, but
it looks like a bug to me.

Retrieve Classification with Vendor's number

Hi,
I created classes and classifications with the CT04 transaction and I assigned vendors to these classifications.
I would like to retrieve these classifications with a specific program, just when I specify the vendor's number (LIFNR).
Do you known a MF or BAPI to do this?
Thanks.
Mickael.

Hi!
First I used some FM-s, but they were so slow and unsure, I stopped using them.
I suggest you to use the AUSP, CABN and CABNT tables instead.
Regards
Tamá

Problem with IP address

I have an odd problem that has recently cropped up. I'm using a LinkSys BEFW11S4 wireless router connected by Ethernet to my MDD 1.25 GHz dual Power Mac (running 10.4.7). We currently have three computers on our network, mine (wired), and a PowerBook (10.4.7) and a 400 MHz iMac (10.4.6), both wireless. All three machines get their IP addresses by DHCP. When the iMac and my Power Mac are active, there is no problem. But when my daughter logs on from her PowerBook and subsequently either 1) restarts or 2) disconnects and then reconnects, not only does she get the "self-assigned address" message with an address beginning with 169, but the router stops functioning and has to be rebooted to get it working again. Configuring her computer to have a static IP address does not seem to work.
Has anyone out there had a similar problem and found a solution for it?

I have a very similar problem since I upgraded to 10.4.7. I have an Intel MacBook Pro and I use both OS/X and Windows XP on my machine. I am connected via airport to a Livebox wireless ADSL router (I am located in France). Whenever I boot up my machine in OS/X now, I have to turn off the airport, wait a few seconds, and then turn it back on, in order to get a DHCP assigned address from the router. The airport, on booting connects to the wireless network and shows a full signal, but it cannot connect to the internet and shows a "self-assigned address" when I check on the interface status. When I boot into Windows it does immediately come up with a DHCP assigned ip address (no, this is not an endorsement for Windows; merely pointing out that the problem is with OS/X and not my wireless router). This was not occurring prior to this update (I was on 10.4.6). My machine is "plain vanilla", except for the Windows partition.
MacBook Pro (Intel) Mac OS X (10.4.7)

Problem with vendor address number in LFA1/ADRC

Similar Messages

Maybe you are looking for