Problem with version sets in Elements 12

I have just started using elelments 12.  I have been having problems with inconsistency in forming version sets.  Some sets forms as expected.  However, quite often after editing, when returning to Organizer the edited picture is not in a version set with the original and in fact is not even visible.  I can get to the edited version only through the "Open" tab in the Editor.  I have check the appropriate "Save in version set" in the save menu. Suggestions? 

Seems you have the same problem :
http://forums.adobe.com/thread/1309160?start=0&tstart=0
The source of the problem is not clearly found today. It seems that happens on previously converted catalogs.
A workaround seems to have been found : killing the autoanalyzer.exe process in the task manager.

Similar Messages

  • Problems using version set in Elements 9

    Hi!
    I have problems using the version set. When saving files in the Element 9 editor I can not mark the "version set" option, its not highlighted and not possible to mark or use. Is there a basic setting that I´m missing or??? I have the MAC version of Elements.
    Also I have noticed that when I have edited a file in the Elements 9 editor and I come back to the Organizer the editor have changed the time of the photo? This means that its rather difficult to find the photo in the Organiser. It often change the time 1 or 2 hours.
    As I cant use the version set I can not keep my tags on the edited pictures. Is there a setting for keeping the tags and catalogue belongings to a edited file?
    As of today this software makes no sense to me and I can basically not keep working with it as it does not support basic functionality that I´m dependent on.
    Best Re
    A

    I’m not seeing this in my own version sets in PSE9; when I expand the set every image has the same date and time under each thumbnail.
    I’m wondering if you have used the “save for web” command at some point, which
     wipes all EXIF metadata, including the date & time of the original - in order to optimize the image for display on the internet. So if you have imported such an image Elements has to make an estimate. Apart from this known scenario I can’t really explain what’s going on.

  • Problems with version sets

    I have PSE 6. When I open a JPG from the Organizer using Full Edit and then try to save, I do not get the option to save the image in a version set (even though I do have the Organizer option checked). However, I noticed that invoking Full Edit also prompts the Organizer to say there is a new file in the watched folders. This "new" file is the very same file in the very same location. If I accept to add the file to the Organizer I get two thumbnails in the Organizer, both pointing to the same file on disk. If I do this then the "Edit In Progress" banner appears on the "new" thumbnail and the editor does allow me to add the image to the version set. I am sure that I did not have to do this before, I would expect Full Edit to just open the image, mark it in the Organizer as being edited, not try to add it back to the catalog and allow me to save the edit in a version set. What might be causing this behaviour?
    I also have similar and I think related problems with RAW images too, but I am hoping that resolving the above will resolve the RAW issue too.

    I should have said that I did try that but it still prevented me from creating a new version in a version set when saving. It is as if the editor needs to start on a copy of the Organizer's entry to allow version sets, as if the original is somehow "locked". Could that be possible?

  • Version sets in Elements 12

    I have just upgraded from 8. I can load my Raw file ok (.NEF) into the raw converter and make adjustments as necessary. However, when I open the image and then save as, although the version sets option is ticked, it does not appear back in the organiser. The file is on the hard disk ok, but does not seem to be accessable from the orhganiser. I've seen some other people are having similar issues with version sets in elements 12 but I can't see what the soluton is.

    Thanks for this advice. I killed ElementsAutoanalyzer.exe as described and this has partially solved the problem. Now when I open the image from the raw converter, and then immediately Save As, I get the options for save to organiser and include in version set ticked, the file is saved but doesn't appear in the organiser. If I then Save a second time (the option Save As is disabled), I get only the option to include it in the organiser (the include in version set option is disabled). This time, after checking ok to overwrite the existing file, it is included in the organiser next to the original file. Further editing of this file does save to a version set, so you end up with the original file and then a version set of all the edits. This is ok, although not ideal as it wastes space in the organiser.

  • Photoshop Elements 13 (Mac) Organizer - Can't save file with version sets.

    I have spent many hours now trying to get Elements Organizer to save Version Sets when I've edited a photo. I've tried more or less every little thing you can find online without any luck. But just moments ago I found that if I move the file to my desktop everything works just fine. I then tried to edit files in a few other folders (also imported to my Organizer) and found that when ever the folder was named to something with a nordic letter in it (å, ä, ö) then I couldn't save my file with version sets (option greyed out) but if I moved that same file to another folder, well then everything worked as it's suposed to.
    I'm using the trial version of PSE 13 for Mac (Yosemite) and the full version is ordered and on it's way. But if this problem can't be fixed, I need to return that order and buy some other photo editing program.
    Can anyone help me with this problem? Is there perhaps a solution to this?
    Please, any help is much appreciated!

    I'm using the English version (as more or less always - Swedish is rarely an option). The thing is that I have never encountered this problem before in any other software I've been using, and certainly not in Aperture that I've been using up until now.
    I name my photo folders with a date and a few words, for ex. "2014-12-31 New Years in Stockholm" (but I normally write in Swedish). I use this method so that my folder that contains the original photos will be easy to find in even without any other software than Finder (or Windows Explorer if I connect my external drive to a Windows machine). I could change the name of all of my folders, or at least all of the folders with a name containing one or more of the letters Å, Ä or Ö to "force" PSE to work as it should, but why? This really shouldn't be a problem.
    I was hoping that their was a simple option or something like that that could fix this issue, but I guess not.
    If this problem lies in the software itself I will have to return it and look elsewhere (but where? Lightroom is certainly not an option if Adobe can't handle "normal" letters and Aperture is discontinued in a few months).
    Thank you for your reply!

  • Problem with Photomerge Exposure, Photoshop Elements 13?

    Problem with Photomerge Exposure, Photoshop Elements 13?. Why does Photomerge Exposure not give me a finished DONE photo. If I open 2 photos, it will merge then, and when I press DONE I get a new photo file that I can save. However, if I open 3 photos, and go through the same process, the software analyzes the photos, I get a new image, BUT when I press DONE, the new image vanishes???? I can open the same 3 photos in Elements 8 and it works fine. any ideas please.

    I, too, am having problems in version 11 with Photomerge Exposure.  I can merge the 3 photos successfully with version 10.  In version 11 when I click done, I am taken back to the Expert mode of the Editor but the merged photo in the photo bin is not accessible.  When I first return to the editor, one of the original images (before merge) is selected.  When I double/click on the merged photo it doesn't become the active image.  In fact, any image I double click on momentarily becomes the active image and then jumps to another one.
    The merged photo is visible in the photo bin but I can't select it.
    I am running version 11 on my MacBook running OS 10.6.8
    Mary Lou

  • Problem with subform set

    Hi all ,
    I am facing a problem with subform set. When i use two subform sets with same set of conditions in a form, only the first subform set works while the second one does nothing. Did any of you faced the same problem ? If so Please let me know the solution you came up with. Thanks.
    SrPrabhu

    Hi scott,
    The problem is with subform set and not subform. In subform set, we can give conditions to make only one subform visible at a time that satisfies the condition. First create a subform set having more than one subform. Now apply the conditions to that subform set. Check if it works. I m sure it wil work. Now just make a duplicate copy of the same subform set. Place it in the same form so that now two subform sets are available. Now preview the form. U wil fine only one subform set working and the other one doesnt.
    We can use any number of subform set within a form. If different conditions are applied to each subform set , it works fine.
    i wonder now wat wud u do in case if we are in need of two subformset having the same condition in a form ?
    Thanks,
    Sr Prabhu

  • Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the

    Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the magic mouse, Where can I configure this one?
    Thank you.

    What do you mean by "impossible to use"? I use a magic mouse with PSE all the time. What are you wanting to do that isn't working?

  • Anybody has a problem with version 8.1.3 (12B466)?

    Anybody has problems with version 8.1.3 (12B466)?
    Any suggestions?
    My iphone 5 keeps restarting

    No problems here. Maybe it was a bad update.
    I assume you have either an iTunes or iCloud backup.
    Connect to iTunes on your computer and restore iOS.
    This will download (if necessary) and reinstall iOS. After it finishes, go through the setup process and restore from your backup.

  • Weird Problem with FSB setting

    Hi all,
    I've just come across a weird problem with FSB setting.
    If I set FSB to 229 my machine runs @ 1.6Ghz only.
    When I set to 230 it runs @ 3.2Ghz (as it should).
    Any ideas what could be causing this?
    Thanks
    Mick

    If FSB @ =
      Strange thing.. What a magical 1MHz  

  • Problem with fingerprint setting

    Hey, i bought an iphone 5s yesterday. I set up the fingerprint yesterday and it worked fine. But after that i faced some problem with the system so i reset the wholephone and edit and deleted my original fingerprint. but after that, my phone cant reenter the fingerprint. it can't read any fingerprint and the name is changed to touch id. what should i do with it?

    Hello annteoeena,
    Congratulations on your iPhone 5s, and thank you for the details of the issue you are experiencing when using Touch ID.  I recommend following the steps below for an issue like the one you described:
    Troubleshooting Touch ID
    Verify that you are using the latest version of iOS.
    Ensure that your fingers and the Home button are clean and dry.*
    Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning.
    Tap Settings > General > Passcode & Fingerprint > Fingerprints and verify:
    Passcode Unlock or iTunes & App Store is enabled.
    One or more fingerprints have been enrolled.
    If one finger isn't working, tap Edit in Settings > General > Passcode & Fingerprint > Fingerprints > Edit to delete and then reenroll the finger.
    If that finger still isn't working, try enrolling a different finger.
    If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
    Find the full article here:
    iPhone 5s: Using Touch ID
    http://support.apple.com/kb/HT5883
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Windows 8.1 having problems with pinter selection using Elements 13.

    I am running Windows 8.1 with Elements 13 and am having problems with PRINT. If I select a printer from the PRINTER menu, Elements recognizes the change of selection, allows me to modify the printer's specific setting and, then, when I PRINT seems to not recognize the selected printer and print of whatever was set as the original printer. Then, I delete the "original" printer in Windows 8.1 and attempt to print again with the same general result except I receive a Printer Not Found error from Windows.
    How do I modify the "original" printer setting (seems to be associated with the file)? Note the "original" printer is not the default printer.

    Hatstead,
    Thank you.
    Yes, all of the print drivers are up to date (re-verified last evening).
    Yes, I can print and select the printer as normal for all of the standard applications I use (Visio, PowerPoint, Word, Excel, Outlook, direct print from file (Explorer)).
    I shortened the printer names from the standard Microsoft convention (based on some of the BOG comments). There was no change.  In fact after the test sequence noted in #5, I re-implemented the "name shortening" yet again (shorter yet). I launched Elements and ran into the same messages noted in #5 (obviously, the "stored" printer did not exist). Yet after I went through the printer selection process (again as in #5) and, after a lag time, Elements redirected the print job what was the "stored" printer which was renamed....I do not know how Elements associated the deleted "Stored" printer with its old name with the newly named printer since no other application could (I checked).
    I have closed and restarted the PC numerous times.
    I have deleted all of the printers except the one I wanted to use for the specific print job. In this case, Elements came back with a message it could not access the "stored" printer. I then selected the correct printer, Elements acted like it was allowing to set up the selected printer with the specifics of the print job, and, then when I went to print, Elements again tried to redirect the print job to the "stored" printer (even though it did not exist).
    The target printer is a "local" printer (USB connected). The apparent "Stored" printer is a network printer. So, I deleted the PC which has the "Stored" printer from the network (actually not only deleted it from the devices on my PC but literally shut the PC down and disconnected it from the network (two different test)) to no avail (still got the test results in #5).
    Yes, I have attempted to print from the Editor (my normal mode) and from Organizer.
    I have copied, open a new file and, then, pasted the image I wanted to print to no avail.
    Is the a "stored" printer associated with the file or with Elements? If so, how to I modify (or dis-associate)?
    Again, thank you.

  • Problem with version enabling tables with ric.

    Hello,
    i have the a problem when i want to version enable tables having ref. int. constraits having delete rule cascade or set null.
    Is it possible that i can't version enable the tables because of these constraints? How i could solve this problem if i want to keep the delete rule?
    thanks,
    Orsi Gyulai

    Hi,
    We are internally creating a <table_name>_g procedure that transfers privileges to the necessary users.  If you have a table with that name, it would explain the error.
    When using ignore_last_error, it will skip the statement that is selected from the all_wm_vt_errors view. Sometimes, the statement can be safely skipped, while in other cases it cannot be. This procedure will always eventually complete when it is repeatedly called with ignore_last_error set to true. However in doing so, some required objects or privileges may not exist or be in an invalid state.
    In your case, you most likely had to skip the 3 or so statements that dealt with the <table_name>_g procedure.  Typically, these statements should not be skipped, but you may or may not see a problem with it due to a number of factors.
    The best course of action may be to drop the trigger in a beginDDL/commitDDL session, and then recreate it in a separate session. Of course, only do this after renaming the <table_name>_g table that you have.  Unfortunately, there is currently no way of getting around this naming convention.
    Thanks,
    Ben

  • How do I eliminate the black blotches associated with version sets.

    I have just had to reload Elements 6.  Now I find that a lot of my people images carry version sets and show large black blotches usualy around the eye area.  Could someone tell me how to avoid and eliminate them. It can be achoieved by deleting some of the sets but I would like to know why theu have suddenlt apperaer after a reload and how to avoid the in the future.
    thanks

    Go back and check the preferences again. It may be (not sure) that you need to turn it off in the downloader first, then in the main preferences, but it should be sticky once you get it all disabled.
    On newly imported photos, you can fix things by just selecting the whole batch then going to Edit>Version set>Revert to original to get rid of the version with the black spots.

  • Problem with character set UTF-16 LE

    Hello.
    There were difficulties with character set change, using function convert ()
    The matter is that in the list v$nls_valid_values the character set AL16UTF16LE does not appear, during too time the inquiry is successfully carried out
    convert ([some-national-characters], ' CL8MSWIN1251 ', ' AL16UTF16LE ').
    But at giving on an input of the data stored in CLOB, there is an error "a character set is not supported"
    What are possible ways of the decision of a problem?

    You can try to use DBMS_LOB. SUBSTR to access LOB data like in the following example:
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE    10.2.0.1.0      Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    SQL>
    SQL> declare
      2  v_i clob;
      3  v_o clob;
      4  begin
      5  v_i := 'a';
      6  v_o:=convert(dbms_lob.substr(v_i,1,1),'AL16UTF16LE', 'CL8MSWIN1251');
      7  end;
      8  /
    PL/SQL procedure successfully completed.

Maybe you are looking for