Problem with video from Canon 7D

I have the version 3.1.1 of Aperture. When I download from my Canon 7D (through a card reader), it sees the Canon RAW photos, but does not see the video at all, which is H.264.
Is there something I need to do differently?

For some reason, it's working again.

Similar Messages

Problems With Video From a Still Camera

I am new to Premier Pro CS4, so this may just be a simple newbie thing . . .
I have a series of videos taken with a Nikon Coolpix series non-video camera.These are all in an AVI format. Premiere recognizes the video, no problem, and the Info tab in Media browser tells me that the file is 30 fps with a frame size of 640 x 480 (1.0). I presume this last number means square pixels.
When I try to view the video from within Premiere, the audio track is fine, but the video stays static for a while, then jumps a few frames and stays static again.
I thought this was frame rate problem, so I payed closer attention to settings in creating the project. So far, nothing has made a difference.
Is there a way to overcome this problem? Since I don't have a video camera (yet) but do have lots of these type of AVI files, I'd like to be able to do something with them in Premiere.

I admit Hunt, sometimes the CODEC thing bewilders me also, but ultimately finding the right codec is the way to go.
Mitchell, so as not to confuse, Hunt is emphasizing getting the right codec on your PC so your native video clips will edit smoothly. My approach is the other end of the stick: forget finding a CODEC, instead use a utility to convert your raw footage to an editable AVI that will utilize whatever CODEC governs the AVI world. That has it's drawbacks, because for one, you're converting a file format, so is there any loss of image quality? The other problem is that a typical raw file of 1GB usually turns into a 2.5GB AVI, so you have bigger duplicated files to have to manage. Wouldn't it be nice to just use your raw file out of your camera? Well, with the right CODEC... amazing how that works.
So, let's just go down the conversion road for a minute. It's some extra work and file management, and that needs to be considered. And, conversion can degrade a file, so that means that you need to use a good converter if you go that route. My 5D Mark II clips are 8-bit 4:2:0... I use NeoScene to upsample them into a 10-bit 4:2:2 AVI file (not purposely, that's just what NeoScene does). I think the added info to interpolate the video up to 10-bit basically just keeps it from degrading. My clips look just grand, no worse than raw. Good enough for me. BUT, it's an extra $99 for NeoScene from VideoGuys.com. Isn't there some way to do this with our current tools? Well, I was blabbing about NeoScene one night on here, and one of the Adobe fellas, Dennis Radeke, piped on and asked me, "why not just use AME to convert your files?". So that tells me it's a possibility, although Dennis hadn;t actually tried it yet. That's up to ME, so I'd better give that a whirl tonight. I'll let y'all know what happens.
Then there is option #3: Somebody piped on the forums and asked me "Why don't you just use the Canon ZoomBrowser software to convert your files to AVIs?... it comes in the box with your camera". I didn;t even think to see what Canon offered, who uses software that comes with a camera anyway??? But evidently Canon has provided this. SO, I suppose I can check that out also, which means that you may want to rummage around in your camera's box and see what software is bundled in there.
In the meantime I'll try AME tonight. However, if you can find the right codec and you get it all to edit smoothly, let us know!

RAW Highlights Problem with conversion from Canon 5D

Hello All,
I recently upgraded my camera from a Canon 20D to a Canon 5D. I shoot only RAW and I recently shot a couple of images of a beautiful sunset out West. I was bracketing the exposures all over the place since the light-drk contrasts were really large and the light was changing so fast. The images looked great on the Camera's LCD but, when I ran them through Aperture I got some really nasty artifacts on the conversions around the highlights. Here are examples:
Full scene
http://www.flickr.com/photo_zoom.gne?id=307781903&size=l
Full scene detail:
http://www.flickr.com/photo_zoom.gne?id=307781906&size=o
Another example:
http://www.flickr.com/photo_zoom.gne?id=307781905&size=l
the problem I see is with the nasty transition from yellow to white in the blown highlight. I also don't like the broad areas of flat yellow - the tonality is completely missing. These are the default RAW settings exported to JPGs and the poor image quality of the highlights looks identical on screen between the RAW images in Aperture and these JPGs, so it's not a JPG artifact.
I don't recall having this problem with the 20D - is the 5D conversion more difficult for Aperture? Might I be doing something wrong? Is there a way to fix this? I ran the RAW file through lightroom and it didn't have the same problem. Please help!
-Steve G

I have the same problems when I shot the sun rise and sun set.. It is very nasty transition from yellow to white or white to yellow from the sun. I don't think Aperture can fix that. It was over the exposure with the sun. And yes, it looks great on 2 inches LCD. I think you need to use filter when you shoot the sunset or sunrise to get the perfect lighting. Let me know, if you know the tweak with Aperture.. I will check out lightroom... I have alot of sunet and sunrise photos to correct.. and i checked out this place http://www.all-creatures.org/pics/sunset.html they have the same problems with yellow to white...

PROBLEMS WITH VIDEOS FROM APPLE PAGE

my macbook pro dont play the videos from the apple page, and tell me i need the AivX something like i download but is not working...

If you've installed third-party QuickTime components such as DivX, they may interfere with HTML5 video.

Problems with Audio from Canon SD1000

Hi,
I've been taking a lot of video lately with my Canon SD1000 and I'd like to edit it with titles and effects. It's a point and shoot still picture camera, but it takes pretty decent video.
I import my clips to iMovie HD, everything is fine, they play. The problem comes when I add titles to the clips. This causes the audio on the clip to be replaced by this put put put sound.
I then tried editing on Quicktime Pro and it also didn't like the clips.
I tried using Mpeg Streamclip to turn the AVI's from the Canon SD1000 into...well I tried turning them into everything from Mpegs to DV files and everything in between. Still, like before, the audio works until I add titles to the clip.
Does anyone have an idea if the SD1000's movies are just incompatible with iMovie HD? Or is there some fix I can implement?
Your help would be appreciated.

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos they only show the video and no sound since iMovie (really QuickTime) is not looking for the audio track within the video track and it gets lost.
One way that might be able to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
Patrick

Problem capturing video from Canon Vixia hg20 to Adobe Elements ,

Hey ,
So I am having alot of difficulty capturing video to Adobe Elements 2.0 from my Canon Vixia hg20 video camera . I am trying to capture using the USB 2.0 port , which I do have the drivers installed for.. If anyone else has had a similar problem and a solution , I would love to hear about it , .
Basically the camera is not even detecting in the software , not really sure what to do??
thanks John

From Cannon Web
Issue: What folder are the videos stored in on the camcorder?
Solution: List of the directory and file structure of AVCHD camcorders
For users who wish to "drag and drop" the video files created by the camcorder the videos can be located by drilling down thru the following folders.
Double click on the removeable disc drive icon to display the root folder of the drive.
Double click on the [AVCHD] folder
Double click on the [BDMV] folder.
Double click on the [STREAM] folder. The video files are located in this folder with a .mts file extension.
- Depending on the software you are using the file extension may need to be renamed to .m2ts to be useable in your playback or editing software.
PE7 Support MTS File

Problems downloading video from Canon Vixa HV30

I have a Canon Vixa HV30. When I try to download video filmed on this camcorder in LP to Final Cut Express it will not allow me to capture it (I can play but cannot capture). Is it because the format is LP instead of SP? Any suggestions on what I need to do?

Thank you for your feedback. I appreciate you giving me more information than I got from the Final Cut Product Specialist on the Apple Care phone line. It's too bad that Apple in its promotion of the Canon HV30 (it's even shown in the tutorial on how to connect using a tape device), as well as MacWorld could not have provided the information you gave, and that neither site mentions a basic fact that you need to buy FW cable as well.
Regarding Final Cut Express 4. It seems to me that the information about connecting to an external drive and 32K preset should have been included in the Apple Certified Final Cut Express 4 book by Diana Weynand.
Thanks again.

What are the settings for capturing video from Canon HV20

Hi All,
I want to capture video from Canon HV20 with Premiere Elements 11. What kind of settings should I use to capture the video with full information?
Here is what I did:
1) According the manual, I went to Capture settings panel (Edit > Project Settings > Capture) and selected HDV as capture format, because my video is at high definition.
2) In addition, I checked "Capture to Timeline" and "Split Scenes by cotent".
Are these settings enough?
Thanks.

HV20user
Sounds reasonable, using Add Media/HDV Camcorder, but....
Have you reviewed the Adobe write up on Premiere Elements 11 DV and HDV capture firewire into it.
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
The mention of Get Media instead of Add Media makes me wonder if the video's instructor was demo'ing from Premiere Elements 10, but...
Major factors have always included having Premiere Elements project preset set correctly to correspond to your camera settings...For HDV data capture firewire...
NTSC HDV HDV 1080p30 or PAL HDV HDV 1080p25 depending on if you are targeting a NTSC or PAL area where frame rates are typically a consideration.
I had not done any DV or HDV data capture firewire into Premiere Elements. But, Premiere Elements 11's take over of the project preset setting would encourage me to encourage you to verify your project settings before the capture.
There are probably many more, but the following is online discussion of one Canon HV20 issue
http://forum.videohelp.com/threads/316970-video-capture-problems-HV20-camcorder-is-control led-but-no-video-capture
If you experience difficulty with the HDV capture fireware into Premiere Elements 11, you might consider what some others have done in this regard, that is, use HDVSplit for the capture firewire and then import the split (.m2t) clips "Add Media" into Premiere Elements 11 with the appropriate HDV HDV 1080p (1440 x 1080 HD anamorphic 16:9) project preset.
Please update us on your progress when you get a chance.
Thanks.
ATR

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

PROBLEms with videos imac G4 flat 17'

PROBLEms with videos in imac G4 flat 17'

It would help to know what videos you are having trouble with? Are these from specific internet links? Are these playing back commercial DVDs? Are these videos produced by iMovie, Final Cut Pro, or iDVD of home video? Are these videos imported from an external Firewire or USB adapter such as Elgato's devices. You give us little to go on. Please give us more details what is going on?

Imovie 8.0.6 doesn't recognize video from Canon Mark 5d II

imovie 8.0.6 doesn't recognize video from Canon Mark 5d II, worked fine with 5d. imported into computer, exported thru iphoto, came out file ex. MOV which imovie doesn't read. Can I get iphoto to export dif. file ex.? 5d using same process file ex. was m4v.

Hi Rikk,
Thanks for answering.
I downloaded and installed the DNG Converter 7.1, then opened Lr again, but it's still not opening the files. Am I doing something wrong?
Please advise.
Thank you,
Joel

When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?

When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?

Hi Steve
worldweary wrote:
Thanks again. I tried channel 13 and it seemed to work better, with less dropouts (albeit not perfect) but sadly my slightly ageing laptop wouldn't recognise the network at all with the Hub set to that channel, so I had to switch it back to 11!
Will try the factory reset at some point to see if that improves things.
I have the same issue with my iPad when streaming videos...like the issue posted on ‎25-04-2014 18h36 by Steve.
Steve - Can you kinldy clarify how you resolved the problem finally.
I was infact planning to change the iPad or sell it off due to this recurring problem.
Thanks and regards
Siva

Motorola SB5101E - problem with video chat

Hi. I have cable modem Motorola SB5101E and connect to net be cable TV .
All is normal , functional, audio, text, etc. but I have problem with video chat be iChat. (3,1) According info from Motorola support is this cable modem without firewall and without any ports, cable TV provider was inform me, so in his server is none block none ports for me, therefore I have maybe any problem in me computer. But Where ? Can you help me anyone ? Thank you in advance and have a nice day.

Hi Jirka:
Do you have your firewall active on your mac? (System preferences>Sharing>Firewall) If the firewall is on, you need to open some ports.
Report back and give us more details on your set up to troubleshoot your issue.

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Windows 8.1 Problem with games from windows store.

I've got a problem with games from windows store. The installation is going well without any problems, however when I try to open it it's loading and then it turns off. The same problem happens when I try to use Games for Windows. I've use a sfc scan and
it shows some errors but unfortunately it cannot fix them. Should I share the CBS log or find the solution somewhere else? I hope you help, best regards.

Hi,
According to my experience, the problem like store game app open failed probably caused by hardware driver. such as Audio and Graphic driver. So, first of all, please try to reinstall these two driver to fix this problem for test.
In addition, for SFC scan failed problem, it can be caused by many reasons, I would suggest you use another command to fix your system for test.
Dism /Online /Cleanup-Image /ScanHealth
Also you can test SFC command in Windows 8.1 safe mode.
Thirdly, if problem persists, please check Event Viewer, generally speaking, it would record the app open failed events.
Roger Lu
TechNet Community Support

Problem with video from Canon 7D

Similar Messages

Maybe you are looking for