Problem with viewing imported images

Not sure if anyone has any ideas for me (I'm getting to the point of uninstalling and doing a reinstall to see if it works)
I have been using PSE6 for months and all of a sudden I am having a problem. Usually, when I import photos (whether JPEG or RAW) the image shows up on my organizer screen. I can see my JPEG file image thumbnails in whatever drive/folder I have saved them to and as per the norm I cannot view the RAW files. I know that I have to edit them and save to be able to view them in the folder thumbnails.
Last night I was importing RAW images and once the import was completed the images appeared as a grey rectangle with the dreaded hourglass and they do not convert to the images. However, if I click on the gray rectangle the image will appear in a new screen but you can imagine how painstaking that would be to have to click on each photo (and I take a lot!) to just see what it was. I was using both a new SD card and a new card reader so I attempted the import twice more with the same results. I then attempted importing with old cards, old readers, hooking the camera to the computer itself with the same results. I switched my camera back to JPEG and still no luck in the organizer screen. However, when going to the folder that they were downloaded to the JPEG images did show up as usual.
Have I just clicked on a button in PSE6 that I need to unclick? The "display" option at the top right has "thumbnail view" checked. I really have no idea what is going on so any help or suggestions would be really appreciated.
Thanks!

There's now an official Adobe tech note with the same solution:
http://www.adobe.com/go/kb403728

Similar Messages

Wallpaper problem with newly imported images. 1680x1050 displaying @840x525

Hello,
I imported some new images into Aperture and I want to use them as Desktop wallpapers for my computer. The images original size are 1680x1050 and they appear to retain they're size upon import.
I then go to System Preferences -> Desktop and ScreenSaver and find my images in the project I placed them in. All my previous imported images that were imported many months ago still display fine however these new images are displaying 840x525! I know the exact size because after selecting the image I can drag its thumbnail view from the preview area.
I then tried just specifying the folder in my hard drive where the images are located and the Desktop and Screensaver applet had no problem displaying the images at their original size 1680x1050 so I don't believe anything is wrong with them.
I tried looking throughout Aperture if there was an import setting that could be affecting this but I didn't find anything. The only thing I've done recently was upgrade my system to 10.5.4 with the Software Update tool. Is there anything else that can be wrong here?
Note: I tried using this wallpaper as well as still have the same issue, http://ironmanmovie.marvel.com/downloads/desktops/images/desk03_1680.jpg
I would appreciate any insight to what can be causing my images to display smaller than they really are on my wallpaper. When viewing them in Aperture they are the correct size.
Thanks,
- Jake

bump

DW CS3 problem with PNG-8 images in Design View?

DW CS3 (build 3481) on XP seems to have problems with PNG-8 images, specifically trying to display them in design view.
I had a very simple image that was able to be exported by Fireworks CS4 as PNG-8 using 4 colors (no transparency) for a tiny file size under 250 bytes.
DW could not display it at all, or even recognize it, reporting it was 0 x 0 in size. I published the page anyway, and it looked fine in the browser.
I upped the number of colors to 32, and DW could then display it in design view in the page I was working on.
I'm still having problems with other PNG-8 images. The attached file "temp.jpg" is a screenshot showing part of the design view in DW.
The smaller image on the left of the banner is "58_certificate_of_discharge.png" (attached), and the larger image below is used as the background of the DIV containing the form,"compassbk.png" (also attached).
These images all look fine in the browser, but terrible in DW.
I'm stumped as to why.
Thanks in advance.

According to a different discussion, the images that are stuck as "Queued" are showing a bug in the virus scanning on the forums.
Now trying the recommended 'camera icon' method...
Looks like it worked.
Now compare what it looks like in DW CS3 in the design view:
It's a 16 color PNG-8 made in Fireworks CS4 with no transparency, size is 113 x 58, ending up at 1.71K.
If this is a repeatable problem in CS3, is there any hope of it being resolved, or am I stuck with upgrading to CS4 as my only option (assuming it's fixed in CS4)?
Thanks.

Problem with Mars J2k Images

Hi there
I have a problem with viewing the extracted images from a PDF
Doc
After saving the PDF Doc into the Mars Format, and then
extracting into folders I see the images
from the original PDF are converted to the J2k format , I
have tried several viewers but none are
able to open the images !
Any ideas?
Thanks a million

Hi,
Reading your message, I'm not 100% certain whether you are
asking if there are any viewers capable of displaying JPEG2000 or
if you are saying that compatible viewers can't display the
JPEG2000 we produce.
If you are just looking for a viewer, IrfanView (a freeware
image viewer) can display them (though you have to download a free
image compatibility pack from their site). It is also my
understanding that there is a free JPEG2000 plug-in included with
Photoshop CS4, which is capable of viewing and converting JPEG2000
files (though it is not installed by default).
If you have tools which you think are capable of viewing
JPEG2000 and are still having problems with our images, please let
me know.
Thanks,
Matt
[Edit: Update information and fix minor typo]

Problem with viewing modules on iPhone / iPad

Hello. I have a problem with viewing my modules on iPhone and iPad. I have the same problem previously with Captivate 6, which I honestly thought that it is solved on Captivate 7, downloaded the trial version just to test it and I got nothing improved about that,
So, when I publish and upload my course on cloud.scorm.com I got this:
iPhone - It only shows the top left of slides and I get full voiceover
iPad - shows photo top left on last slide (not first?) and hangs with no voiceover
This is a simple 4 slide course which I use for testing the project.
If someone wants to test here is a link: http://cloud.scorm.com/sc//InvitationLaunch?userInvitationId=d75b27a6-e7df-41fa-87e6-d7576 48aea93
And I really expect some help with this, because it's really important not to have this type of problems.
Thanks.

"And I really expect some help with this..."
Please remember that this is a user forum, not Adobe Support. If you've paid some money for something and it's not working as you expect, you certainly have the right to require the manufacturer to provide after sales support.
But you would not track down another purchaser of the same product and tell them they owe you support...would you?

Problems with viewing in CS3

I am using Dreamweaver CS3 on a MacBook and have recently started experiencing frustrating problems in using Dreamweaver.
Very recently I am now no longer able to see the current CSS displayed for the element I wish as when I click on it at the bottom of the page, it will only display an element further up the hierarchy (see screenshot http://imageshack.us/photo/my-images/651/screenshot20120224at093.jpg/) . You can see that I would like to see the details for ul but it won't show anything but #mainContainer.
I am also experiencing other problems on some (not all) sites I work on such as text and images disappearing in design view. I can get them back by toggling the show CSS button but it is getting very annoying as I have to do this after nearly every change I make. I have read other posts about this problem on this forum as I am not the only one and have tried repairing fonts as suggested but it hasn't made any differnce. The sites where I seem to be experiencing this involve jQuery sliders and galleries so am not sure if there is some kind of conflict here.
I have reinstalled Dreamweaver this morning to see if this would cure my problems but unfortunately it hasn't.
I would really like an answer to my first problem of not being able to view current CSS as I think this is a Dreamweaver issue and nothing to do with any coding as such but mention the other problem in case it is related and also hoping for a resolution for that as well.
Many thanks
Lisa

That Intel Pentium message is misleading and you can normally ignore it I don't think it is related to you problem with viewing thumbnails.
Can you give us the following information? Most of it can be found by right-clicking on the "Computer" icon and choosing Properties.
Vista version
Processor
Photoshop version number
Amount of RAM installed
Make and model number of video card

Problem with displaying BLOB images on JSP page using a servlet

hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
here is one of my image servlet's working versions (the essential part of it) :
               BLOB blob=null;
          rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
          while (rset.next())
               blob=((OracleResultSet)rset).getBLOB(2);
          response.reset();
          response.setContentType("image/jpeg");
          response.addHeader("Content-Disposition","filename=42.jpeg");
                ServletOutputStream ostr=response.getOutputStream();
               InputStream istr=blob.getBinaryStream(1L);
                int size=blob.getBufferSize();
          int len=-1;
                byte[] buff = new byte[size];
                     while ((len=istr.read( buff ))!=-1 ) {
               ostr.write(buff,0,len);
         response.flushBuffer();
         ostr.close(); and my JSP page code :
<img src="/ImageServlet" border="0" > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.

I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
here's the magic tag : <img src="ImageJSP.jsp" border="0" > enjoy : )

Problem with viewing Adobe PDF documents

Problem with viewing Adobe PDF documents
I have a Windows 7 Home Premium Computer
I have read all the suggestions and I have tried downloading multiple versions of Adobe Reader for Windows 7 and Vista from http://get.adobe.com/reader/otherversions/.
Prior to downloading each version I would delete the current version using control panel programs uninstall.
After each new installation I would shut down the computer and then restart the computer.
I have tried downloading versions with and without having my antivirus (CA Total Defence) running.
I am told after download that the version downloaded successfully.
I have read Acrobat Help http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.
None of the above has helped.
The problem is no matter what version of Adobe Reader I download, I cannot seem to open a PDF and read it. Nor will the Reader itself stay open.
1. If I try opening the reader from the desktop link or from the actual program menu, the reader opens for about 5 seconds and then closes of its own accord. If I try to click on any of the reader menus (eg File, Edit, View, Window, Help, Tools) then a warning bell is sounded and the menu does not open. Shortly thereafter the reader closes.
2. If I try to open the reader by double clicking on a PDF document then the reader opens but the document is not shown (only the grey PDF reader screen is shown) and then the reader closes after about 5 seconds of its own accord.
The desktop shortcut shows as the 'red Adobe Reader icon'. But the actual program menu icon shows as a blank folder icon. All PDF documents show as the PDF Adobe icon.
I have tested various PDFs and none will open on this computer but they will open on other computers.
I have created a word document and saved it as a PDF. It looked like it had save correctly (has the appropriate icon) but when I try to open it as per step 2 above then the document is not shown and then the reader closes after about 5 seconds of its own accord.
Does anyone have any ideas about what is going on and how I can fix this?
Could you please answer in this forum and email me at [removed]
I am so puzzled and frustrated.

Thank you so much this did the trick.
I spent so many hours on trying to sort this out and your answer was so simple and clear.
Regards
Kazzamday

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Problem with export / import

Hi everybody, I am having a problem with an import. I am doing an export with a value in an user exit:
EXPORT V_NLQNR = V_NLQNR TO MEMORY ID 'QUANTL'
And after I call import in another program:
IMPORT V_NLQNR = V_NLQNR FROM MEMORY ID 'QUANTL'.
But when I check the sy-subrc I am getting 4, so I don't get anything.
Does anybody why?? Is there a problem if I call the export from an user exit??
Thanks in advance.

Hello,
I think you have the right idea.
As a suggestion I would name my variables to make it clear which data is being
exported/imported. I would also use different names on the left and right side of the = sign.
Here is a working example from programs that I use:
In the first program
   EXPORT intercodata FROM g_data_exp TO MEMORY ID 'INTERCOWOS'.
     where g_data_exp is declared as a global variable
In the second program
   IMPORT intercodata TO g_data_imp FROM MEMORY ID 'INTERCOWOS'.
     where g_data_imp is declared as a global variable
The syntax that you use ( p1 = dobj1 ) should work as well, just make sure that the variable v_nlqnr to the right of the equal sign has a value before the export.
Regards
Greg Kern

PSP: problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Problem with viewing activities

Hello,
we have SCSM 2012 R2, we have SCSM console installed on 2 computers. Only on one computer we have problem with viewing activities. For example, we go to Work items - Service Request Fullfulment - All Open service requests - Choose one request and open a
form, click Activities, double click on step (RAXXXX) and window with Review Activity details doesn't appear.

Was there a second monitor connected to the computer before and is disonnected now? Sometimes it could happen the activity form will open on the "second non-existing monitor". Do you see the activity form window in the task bar of the affected computer?
If so activate the activity form window, press "alt"+space, select "Move" from the menu and try to move the activity form window to the main screen suing the arrow keys.
Andreas Baumgarten | H&D International Group

Problem with viewing a rented movie. Whem I try playing it I get a message saying my apple tv is not authorized.

Problem with viewing a rented movie. Whem I try playing it I get a message saying my apple tv is not authorized.

is this a rental from the Apple TV or one you have in iTunes. If from the Apple TV try restarting the Apple TV, if from iTunes, try de/re-authorising your account.

My sony SD card got formatted recently with very important images. On top of it we recorded photos a

my sony SD card got formatted recently with very important images. On top of it we recorded photos again. I am able to see iformation like the size of the image along with blank thumbnails, but not the actual images. Please HELP.
Regards
Gunshe Ramchandani

It may be possible to recover deleted pictures or data by using the Memory Card File Rescue 3D software at http://esupport.sony.com/US/perl/swu-download.pl?template=EN&mdl=&upd_id=7184&SMB=YES.
Otherwise, the SD card may need to be sent to a professional data recovery service company, like Sony Media Services or DriveSavers Data Recovery. For more information and pricing, visit the Sony Media Services Web site at http://www.sonymediaservices.com/ or the DriveSavers Data Recovery Web site at http://www.drivesaversdatarecovery.com.
If my post answers your question, please mark it as an “Accepted Solution.” This will allow users to find verified answers more quickly.

PLSQL Server Pages (PSP): problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Problem with viewing imported images

Similar Messages

Maybe you are looking for