Problem with viewing the project

When I run the project the page can not be display with internet explorer v7 and the project was run in the same version what can I do because I'm beginner in jdeveloper

The first thing to do is find out what is the error that you are getting - then try and figure what is the source of that specific error.

Similar Messages

Problem with viewing the tv series "Gurren Lagann" in itunes.

When I go to the itunes store and search gurren lagann the page loads fine but when I try to view the complete series itunes stops working. This problem happens with different accounts and on different computers.
the itunes verson that is currently on my inspiron computer is 9.0.3.15
is this a problem with itunes or is it a problem with my computers/accounts?

Fault Module Name: WebKit.dll
Fault Module Version: 5.31.21.8
That's the rendering engine iTunes uses to display the Store contents.
There's a newer version of webkit.dll in the most recent version of Apple Application Support (version 1.4.1 as I write this post). To update your Apple Application Support, the most straightforward procedure would be updating to iTunes 10.1.1.4 ... but if you're not keen on that, we could do it by updating your QuickTime to version 7.6.9 (there's a version 1.4.1 for Apple Application Support in the QuickTime 7.6.9 installer).
If you want to go the QuickTime-update route, here's a link to the download page for QuickTime installers. (Get the installer that doesn't mention QuickTime ... the installer file should be called "QuickTimeInstaller.exe" rather than "iTunesSetup.exe" or "iTunes64Setup.exe".)
http://www.apple.com/quicktime/download/
... does your iTunes behave better with the newer version of webkit.dll in place?

Has anyone had a problem with viewing the same pdf but it looks different on two computers?

I am plotting a pdf file from a DWG drawing. The pdf file looks fine on my computer. However, when I send it to someone else the lines are not visible and it is hard for them to read. I have tried exporting to pdf and plotting to pdf. The program I am using is AutoCAD 2012 and Adobe Reader X. I am having problems finding a solution to this.

Hello, you posted in a forum about the help files, I understand the possible confusion with its name. I'm going to move this post to the Acrobat forum.

Problem with viewing the next page on "My Wish List"

Hello: "My Wish List" page in the iTunes store won't let me see page 2 (or higher). Even when I click on the obvious icon labelled "2" or "next" (as in "next page"), the page stubbornly remains on page 1. This seems ridiculous, but I'm wondering if anyone else is having this gnat of a problem? Any suggested solutions welcomed -- thanks in advance. Oh yes, I'm using iTunes 10.4.1.

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting.
Any luck there?
B-rock

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

Please, I am in a very big problem I designed the project by Adobe director And you test the software on the computers on Windows and works with high quality When I tested the project on Apple Macintosh operating system, Li appeared a number of problems

Please, I am in a very big problem
I designed the project by Adobe director
And you test the software on the computers on Windows and works with high quality
When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
But I have a problem too big
The project works on some devices and others show me messages mistakes and why chasm different operating system version
Apple's Macintosh and these messages
"biosegnatures" can't be opened becouse it 's from undefined developer "
others
shokwave player error
pleas what can i do

Welcome to the Support Communities.
m.raslan wrote:
I tested the project on Apple Macintosh operating system
Click on the  menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
Update your product list
m.raslan wrote:
"biosegnatures" can't be opened becouse it 's from undefined developer "
This Apple doc may help:
OS X: About Gatekeeper
m.raslan wrote:
shokwave player error
Is Shockwave Player installed?...
http://www.adobe.com/shockwave/welcome/
...If not, get it here:
http://get.adobe.com/shockwave/

Problem with viewing modules on iPhone / iPad

Hello. I have a problem with viewing my modules on iPhone and iPad. I have the same problem previously with Captivate 6, which I honestly thought that it is solved on Captivate 7, downloaded the trial version just to test it and I got nothing improved about that,
So, when I publish and upload my course on cloud.scorm.com I got this:
iPhone - It only shows the top left of slides and I get full voiceover
iPad - shows photo top left on last slide (not first?) and hangs with no voiceover
This is a simple 4 slide course which I use for testing the project.
If someone wants to test here is a link: http://cloud.scorm.com/sc//InvitationLaunch?userInvitationId=d75b27a6-e7df-41fa-87e6-d7576 48aea93
And I really expect some help with this, because it's really important not to have this type of problems.
Thanks.

"And I really expect some help with this..."
Please remember that this is a user forum, not Adobe Support. If you've paid some money for something and it's not working as you expect, you certainly have the right to require the manufacturer to provide after sales support.
But you would not track down another purchaser of the same product and tell them they owe you support...would you?

Problem with viewing Adobe PDF documents

Problem with viewing Adobe PDF documents
I have a Windows 7 Home Premium Computer
I have read all the suggestions and I have tried downloading multiple versions of Adobe Reader for Windows 7 and Vista from http://get.adobe.com/reader/otherversions/.
Prior to downloading each version I would delete the current version using control panel programs uninstall.
After each new installation I would shut down the computer and then restart the computer.
I have tried downloading versions with and without having my antivirus (CA Total Defence) running.
I am told after download that the version downloaded successfully.
I have read Acrobat Help http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.
None of the above has helped.
The problem is no matter what version of Adobe Reader I download, I cannot seem to open a PDF and read it. Nor will the Reader itself stay open.
1. If I try opening the reader from the desktop link or from the actual program menu, the reader opens for about 5 seconds and then closes of its own accord. If I try to click on any of the reader menus (eg File, Edit, View, Window, Help, Tools) then a warning bell is sounded and the menu does not open. Shortly thereafter the reader closes.
2. If I try to open the reader by double clicking on a PDF document then the reader opens but the document is not shown (only the grey PDF reader screen is shown) and then the reader closes after about 5 seconds of its own accord.
The desktop shortcut shows as the 'red Adobe Reader icon'. But the actual program menu icon shows as a blank folder icon. All PDF documents show as the PDF Adobe icon.
I have tested various PDFs and none will open on this computer but they will open on other computers.
I have created a word document and saved it as a PDF. It looked like it had save correctly (has the appropriate icon) but when I try to open it as per step 2 above then the document is not shown and then the reader closes after about 5 seconds of its own accord.
Does anyone have any ideas about what is going on and how I can fix this?
Could you please answer in this forum and email me at [removed]
I am so puzzled and frustrated.

Thank you so much this did the trick.
I spent so many hours on trying to sort this out and your answer was so simple and clear.
Regards
Kazzamday

PSP: problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this.

Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this. Would be thankful fo rany/all advice.

I'm having the same issue. I've been able to work around it by opening the txt file and copying the contents. Then I open a new file in Sublime Text 2, paste the contents and save the new file as "project.json". It seems to work, but it'd been nice if I didn't have to do this everytime I publish a new project.

Problems with a xcode project

Hi there,
I'm trying to compile an existing Xcode project which has used boost library and threadpool library. I have already added the correct header path and library path, and the boost has been successfully compiled(cause the code uses libboost_thread.a).
Here's my header search path:
/usr/local/installation/prefix/include(boost header after installed)
/usr/local/boost1_450
/Users/niexiao2008/threadpool-025-src/threadpool/boost
And the library search path is:
/usr/local/installation/prefix/lib
I'm sure the boost library has been installed correctly and passed through some test codes, but there's still some problems when buliding the project:
i686-apple-darwin10-gcc-4.2.1: error trying to exec '/Developer/usr/bin/../libexec/gcc/i686-apple-darwin10/4.2.1/cc1plus': execv: Argument list too long
Command /Developer/usr/bin/gcc-4.2 failed with exit code 1
Could someone please help?

In the Build results window select the compile line that is failing. This should reveal a 'details' icon on the line to the right. Click the icon to display the actual compile command and try to determine why the argument list is too long.

Problem with viewing activities

Hello,
we have SCSM 2012 R2, we have SCSM console installed on 2 computers. Only on one computer we have problem with viewing activities. For example, we go to Work items - Service Request Fullfulment - All Open service requests - Choose one request and open a
form, click Activities, double click on step (RAXXXX) and window with Review Activity details doesn't appear.

Was there a second monitor connected to the computer before and is disonnected now? Sometimes it could happen the activity form will open on the "second non-existing monitor". Do you see the activity form window in the task bar of the affected computer?
If so activate the activity form window, press "alt"+space, select "Move" from the menu and try to move the activity form window to the main screen suing the arrow keys.
Andreas Baumgarten | H&D International Group

Problem with viewing a rented movie. Whem I try playing it I get a message saying my apple tv is not authorized.

Problem with viewing a rented movie. Whem I try playing it I get a message saying my apple tv is not authorized.

is this a rental from the Apple TV or one you have in iTunes. If from the Apple TV try restarting the Apple TV, if from iTunes, try de/re-authorising your account.

Problems with viewing in CS3

I am using Dreamweaver CS3 on a MacBook and have recently started experiencing frustrating problems in using Dreamweaver.
Very recently I am now no longer able to see the current CSS displayed for the element I wish as when I click on it at the bottom of the page, it will only display an element further up the hierarchy (see screenshot http://imageshack.us/photo/my-images/651/screenshot20120224at093.jpg/) . You can see that I would like to see the details for ul but it won't show anything but #mainContainer.
I am also experiencing other problems on some (not all) sites I work on such as text and images disappearing in design view. I can get them back by toggling the show CSS button but it is getting very annoying as I have to do this after nearly every change I make. I have read other posts about this problem on this forum as I am not the only one and have tried repairing fonts as suggested but it hasn't made any differnce. The sites where I seem to be experiencing this involve jQuery sliders and galleries so am not sure if there is some kind of conflict here.
I have reinstalled Dreamweaver this morning to see if this would cure my problems but unfortunately it hasn't.
I would really like an answer to my first problem of not being able to view current CSS as I think this is a Dreamweaver issue and nothing to do with any coding as such but mention the other problem in case it is related and also hoping for a resolution for that as well.
Many thanks
Lisa

That Intel Pentium message is misleading and you can normally ignore it I don't think it is related to you problem with viewing thumbnails.
Can you give us the following information? Most of it can be found by right-clicking on the "Computer" icon and choosing Properties.
Vista version
Processor
Photoshop version number
Amount of RAM installed
Make and model number of video card

PLSQL Server Pages (PSP): problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Problem with viewing the project

Similar Messages

Maybe you are looking for