Problem with ViewSonic model vx715?

ViewSonic vx715 turns on then goes dark or shuts off. When I turn it on with input cable in it, the power light turns green, then clicks to orange or simply just shuts off. Ive looked at other forums saying it was a default in the model. Something to do with a capacitor or soldering. I took the thing apart and found nothing wrong with either. Any suggestions?

I have a Power MacG5 behaving exactly the same way with a large Westinghouse (LCM.22W) LCD Monitor. The problems began when I decided to enable the sleep function to save electricity. For years it worked fine and the sleep problems into an unwakable black screen started on and off with me doing the same to remedy it: restarting or unplugging and replugging the DVI 400 cable (Monster Digital Video)from the CPU DVI port. Now nothing works as a remedy. I have no alternate monitor to use to access the CPU. Now when I reseat the DVI cable the monitor says check connections indicating it isn't hooked up to a DVI output video source even though it is.
I'm starting to wonder if the problem is the G5 video card in the CPU and not the cable or the monitor since I'm not the only one who has experienced the problem with a large monitor when the computer goes to sleep and the monitor shuts down.

Similar Messages

  • Problem with distribution model receiver ports

    Hi,
    I am facing a problem with distribution model.
    I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
    But both objects will run at different times.
    Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
    I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
    When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
    So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

    Hi kotesh,
    A similar issue.
    check if this will help.
    Do the following:
    Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
    Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
    Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
    source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
    Regards,
    SuryaD.

  • Problem with Data Model and Analysis View

    I create an analyze in BI Publisher and then i create a data model using this object.
    When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
    So i was check the analysis and all looks appears to be fine,  In the results tab it show me a complete table with the data i was looking to use.
    So i try to repeat the error and when  i try to create the XML for the Data Model i found this two error in the logs:
    [root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
            at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
            at java.lang.Throwable.<init>(Throwable.java:196)
            at java.lang.Exception.<init>(Exception.java:41)
            at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
            at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
            at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
            at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
            at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
            at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
            at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
            at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
            at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
            at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
            at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    And when i try to view the report that use the analysis i got this two warning in the logs:
    [2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
    Any ideas about how to solve or debug this?
    Thanks

    I follow your instructions and it works fine. I can create the XML and the reports can show data.
    So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
    Any idea how to debug it?
    Thanks.

  • Problem with Viewsonic external screen

    Hi everyone, I have the new MBP and miniDP > DVI cable, but nothing shows up on my external Viewsonic vx2035. The same combination works with other monitor, also the Viewsonic works with my old MBP... Any idea? Thanks.
    John

    I'm having a similar problem with my Cintiq. I've been dealing with both Apple and Wacom to address the issue and it looks like a compatability problem.
    The reason I'm writing on this thread is that, as I was talking to the Wacom guy, I mentioned the Viewsonic issue I'd read about here. After a bit of silence, he told me that both Wacom and Viewsonic buy their lcd's from the same manufacturer. This would suggest an incompatibility issue that relates specifically to the brand of lcd.
    Anyway, I hope this get's sorted out soon, as I would love to be able to repurchase the MBP I just returned due to this issue.

  • Problem with Viewsonic VX2025 display and PowerPC G5

    I recently switched from an old G4 tower to a less-old G5 tower with dual 2GHz processor and a GeForce 6600LE graphics card. The monitor I was using with the G4 is a Viewsonic VX2025, and they worked flawlessly together. Not so much for the G5. The monitor, which is connected via one of the two DVI ports on the G5, works when the computer is started cold. However, after a period of inactivity or sleep, the monitor goes black and will not receive a signal. The power to the monitor remains on, but the light on the monitor is yellow. If I tap the keyboard or click the mouse I can hear the tower powering up, and my mouse will flash its light, but the monitor will remain black. At this point I will have to power down via the power button. Occasionally, however, the G5 will not power down and I'll have to disconnect the power source. At this point turning the computer back on will result in the same black monitor screen unless I wait at least 20 minutes to turn it back on. In which case, everything will work fine as long as it doesn't go to sleep.
    I've tried re-seating the power cord for the monitor, and checking the connections.
    Now, I've switched to an old VGA monitor that I dug up from the garage with a DVI adaptor. This system works fine and I've had no problems. However, the monitor quality isn't very good and I need to figure out a way to get the G5 working with my Viewsonic. Any suggestions?

    I have a Power MacG5 behaving exactly the same way with a large Westinghouse (LCM.22W) LCD Monitor. The problems began when I decided to enable the sleep function to save electricity. For years it worked fine and the sleep problems into an unwakable black screen started on and off with me doing the same to remedy it: restarting or unplugging and replugging the DVI 400 cable (Monster Digital Video)from the CPU DVI port. Now nothing works as a remedy. I have no alternate monitor to use to access the CPU. Now when I reseat the DVI cable the monitor says check connections indicating it isn't hooked up to a DVI output video source even though it is.
    I'm starting to wonder if the problem is the G5 video card in the CPU and not the cable or the monitor since I'm not the only one who has experienced the problem with a large monitor when the computer goes to sleep and the monitor shuts down.

  • Saturation problem with 741 models

    Whenever I saturate a 741 op-amp by exceeding the limit of its positive supply voltage, the output saturates to the negative supply voltage.
    For example, if I construct a voltage follower with +/- 15 V supplies and an input of +20 V, the output is (roughly) -15 V, not +15 V.
    This occurs with a variety of 741 op-amp models, such as LM741*, UA741*, 741, and Op-Amp_741.
    I saw similar problems with a few other op-amp families I tried.
    Is this a known limitation of these models in Multisim, or am I doing something incorrectly?
    See the attached file for an example.
    Thanks,
    Bob
    Solved!
    Go to Solution.
    Attachments:
    satprob.ms10 ‏178 KB

     yyao wrote:
    Hi, 
    This problem may be due to JFET inversion. Some opamps, especially JFET opamps, exhibit this behaviour. When the output is expected to exceed some positive threshold, the output inverts to the negative rail. If you hooked up a JFET opamp in a real circuit, you will see this behaviour. So, this may have to do with the opamp model that you are using. If this is not the behaviour that you expect (i.e. not what you observe in a benchtop setup), my best suggestion is to substitute your simulation opamp for another one that is similar in performance, but does not exhibit the same output inversion.
    Take a look at this page by Analog Devices. This phenomena is outlined in the section labeled "What other features of op amps should the user know about?".
    Hope that helps.
    I don't think it is the "phase inversion" problem described in the first paragraph of the aforementioned section.  I don't think the 741 is a JFET or the common-mode input is too negative.
    However, it does seem to be consistent with the "more serious form of latchup" described in the second paragraph.  The issue occurs when the input exceeds the rail voltage by ~0.6 V, which could be turning on some internal diodes.  The page suggests that this would destroy a real op-amp.  In simulation, the op-amp wouldn't be destroyed, but it might show erratic behavior when Vin > Vrail.
    Does this make sense to anyone else?  I'll try to remember to test this with a real op-amp next week.
    Message Edited by btriffles on 03-17-2009 07:52 PM

  • 2 problems with tv model number 55sl417u

    Alright, I have been having two problems with this toshiba tv. One: It will just randomly shut off while watching tv or playing video games. It will shut off and then after 45 seconds it will come back on. Second problem is that i will not be able to shut it off using the remote or the buttons on the tv. Its like it freezes. To get it to turn off i just shut off the power strip for 30 seconds then turn it back on. The tv will then turn on and i can turn it off. I dont know whats wrong or what to do. Can anyone help?

    Yeah it randomly shut off on me two hours before the super bowl sunday and did not turn back on. The clicking sound was made the picture would not come on and was left with three green blinking lights. so after spending an hour on the phone trying to get someone from customer service, they told me some one from Nexicore would contact me Monday. I waited till about 5 Monday for a phone call and never got it. So i decided to call Nexicore myself and they told me they were waiting for my local tech guy to receive a part from Toshiba. It could take 3 to 5 business for him to receive the parts, so now i am waiting for a phone call from that guy. If i dont hear anything by friday i will be calling Nexicore again to check on the status. Such a pain for a tv that is only a few months old. Thank god it is under warrenty

  • Problem with new model MC14013BCP

    Hi, what's wrong with this model???
    <attachment removed>

    Mike_85_,
    It appears the link to this model provides for an IBIS implementation only (I-V curves) and not SPICE.  While this gives you some idea on I/O transfer curves, it does not provide any functional implementation data.   Multisim does not currently support IBIS modeling, only true SPICE models are supported.
    This is a D flip flop and there are several 'generic' models that can be easily adapted to fit some of the specifications of this device using a D-chip device.   I would suggest going to the TIL family of digital components and look for a similar device D flip flop device.   Look at the model and you'll see what parameters you can change.
    This thread provides some additional details on the d_chip implementation (this is a customized Multisim 'X SPICE' model).
    http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/models-using-d-chip/m-p/953453#M6602
    If you are interested in the exact I-V I/O characteristics, it is possible, but requires additional work and this is a more in depth topic than is intended for this forum.   Let me know and we can offline this topic if the exact I/O characteristic is needed.
    Regards,
    Pat

  • WRT54G General problems with this model

    Has anyone else seem to find that WRT5G4 Routers always seem to be having problems? Im having a problem ( I think I fixed it though thanks you to guys) My friend always has a problem with it not dialing though his PPP0e. And both my neighbours have a problem with it droping the signal. Or maybe I have had bad luck with them.

    i have had problems with this one too.  it keeps dropping my signal.  i have v.8  i was told to upgrade my firmware but it is a .bin file and i am not sure how to access the file. anyone have any ideas?

  • Wake up problems with MacbookPro (Model 6,2)

    Hello everyone,
    I have updated my MacbookPro on lauch day and first I send a very big thank you to all guys worked on Lion. The installation process was flawlessly and comfortable. You've done a great job. Machine feels faster and working with gestures is very comfortable.
    After using my machine for 2 days now I have to admit that my Macbook has several problems with waking up. If I close the lid for a few hours (f.e. over night) the fans go up after a while, the system gets hot and cannot wake up when I open the lid. The only help is hardly to shut it off and to boot it up afterwards.
    At this time I will shut off the system after using it and boot it up every time I want to work. But waking up was always so perfect on Mac OS X.
    Would you please fix it again, soon?
    Kind regards,
    m3x

    No, you can't use the Thunderbolt Display because, as you note, you have no Thunderbolt port. You can use the Apple Cinema Display, however.
    Clinton

  • Detect Displays problem with ViewSonic VX2035 - VGA and Snow Leopard 10.6.6

    I just bought a KVM switch (IOGEAR GCS72U) so that my ViewSonic VX2035WM can jump between my macbook (where it is an external monitor) and a linux box that I built. The monitor worked fine with the macbook, always detected automatically or by the "Detect Displays" button - before I switched from a DVI connection to a VGA connection. I had to switch to VGA to facilitate the KVM switch. The monitor has a separate built-in VGA input and built-in detection of analog versus digital input.
    Now that I have setup the KVM switch and VGA connection - using appropriate Apple mini-DVI-2-VGA adapter - Snow Leopard detects that a monitor is connected, but only generically as "Display" instead of naming the display model (ViewSonic VX2035WM). Display Preferences does not provide the optimal resolution (in this case, 1680 x 1050), with the closes being 1400 x 1050, resulting in a distorted picture.
    http://www.viewsonic.com/products/desktop-monitors/lcd/x-series/k
    The KVM switch is listed as being compatible with Mac OS X, and supports resolutions up to 2048x1536.
    I do see a picture. It does detect that a monitor is there. It does not recognize what kind of monitor it actually is, and it does not allow me to select the resolution/frequency settings that I actually need.
    When I skip the switch and connect directly from the Apple VGA adapter to the built-in VGA input, the problem is exactly the same. No amount of putting the laptop to sleep, turning monitor off, clicking Detect Displays, is getting anything to change. An option to manually specific the resolution and monitor would be fine. At this point I would even be willing to pull a "Windows" and install a driver, so long as the problem is fixed. I'm pretty sure the appropriate driver is already included in Snow Leopard, because it was working fine and recognized this model before I switched from DVI to VGA connections.

    Using the printerto  manage color is worse, still magenta cast, or gray/browns. We've tried all the different settings withing Photoshop Color Setting, we've tried all the different combinations within the printer window dialogue, all either have a magenta cast or red cast...we've tried different combinations with photo papers...what is interesting is with no change in any settings if we use plain copier paper with the medium selected for Plain Paper the colors are truer but because of paper quality the image is not good enough. I'm thinking it may be something within settings for paper and ink. But since I am not techically savy enough to understand all of the color management settings we've relied just on the internal settings and only had to change the medium paper quality to get good images. Once I upgradedto Snow Leopard  it appears I have to be more sophisticated in color management. At a loss. What we're going to try now is change out all the inks to fresh Canon inks, and recalibrate monitor (which I did before but maybe needs again) and try and match a Pantone Color Guide to set monitor, and experiment with paper combos...if that doesn't work quess I have to bring in some tech help....we're designers and graphic artists so havng a hard copy for clients is crucial. Thank you for any help.

  • Problem with Table Model Listener

    I hava a JTable with three columns and dynamic number of rows. The first column has a text. Second column has check box and each third column has three radio buttons. I am using the table model listener to fetch the row and column which the user clicked. here is the code
    public void tableChanged(TableModelEvent e)
    row = e.getFirstRow();
    column = e.getColumn();
    TableModel model = (TableModel)e.getSource();
    String columnName = model.getColumnName(column);
    Object value = model.getValueAt(row, column);
    System.err.println("Value: "<em>value.toString()</em>" Row: "<em>row</em>" Column: "+column);
    attendanceModel.setHolidays(row, value.toString());
    }Here is the problem
    {color:#ff0000}Case 1{color}: When I click the first radio button in first row and third column it works and the output of print statement is
    *{color:#993300}Value:0 Row:0 Column:2{color}*
    {color:#ff0000}Case 2{color}: Next I clicked the first radio button in second row and third column the method is not called nothing is printed
    {color:#ff0000}Case 3{color}: Now I clicked the first radio button in third row and thrid column, the method is called and the output of print statement is
    {color:#993300}*Value:0 Row:1 Column:2*{color} ; but the actual value of row should be 2*. Here it is showing the row and column of the previously selected item.
    But in {color:#ff0000}case 2{color} instead of first radio button if I selected the second radio button the print statement will print the correct value i.e
    {color:#993300}*Value:1 Row:1 Column:2*{color}
    ie If I select different radio button in each row the print statement shows the correct value. But if in each row the same radio button is selected its not working properly. For first row it prints properly. If same radio button is selected in second row the method is not called. But from next row onwards the row value is showing the previously selected row as in {color:#ff0000}case 3{color}.
    But for the checkboxes in column 2 the same is working properly. Each column has only one check box. So when I select the check box in each row the row and column values are getting changed accordingly.
    Could some one help please?
    Thanks,
    Zach.

    To get better help sooner, post a [SSCCE (Short, Self Contained, Compilable and Executable, Example Program)|http://mindprod.com/jgloss/sscce.html] that demonstrates the incorrect behaviour.
    db

  • Problems with ViewSonic LCD displays?

    I have a ViewSonic VP2030b 21.5" LCD monitor hooked up to my G4 DA. The
    monitor works OK with these two exceptions:
    1. "About This Mac" info on Displays consistently says "No display detected".
    2. I frequently have to restart the G4 several times to get the monitor to respond
    and light up. Once it's finally on, it works fine.
    The installation software that comes with the monitor installs only onto my OS9
    volume, not onto OSX. Since the monitor dates from 2005, it should be
    compatible with at least the earlier version of OSX. I inquired about any
    update software at ViewSonic and was told that my install CD is the latest
    version they have for Mac.
    Is anyone using a ViewSonic LCD monitor having similar problems?

    What does it say in System Preferences > Displays? What if you click the "Detect Displays" button there?
    My Mac has a card that supports two displays. It reports the correct info for the first one, then underneath, with no break, says "No Display Detected". In my case, I know it is talking about the second display, which is correctly identified as not connected since I only have one.
    Most displays do not need any additional driver software on the Mac, so do not be alarmed if that CD will not install.
    What graphics card is this?

  • Problem With Charger Model A1265

    Hi everybody, well a friend gift me a charger Model A1265 for my iPod Touch 4g and its charge the batery, but with one problem, when my iPod its connected to the charger the screen is very sensitive, I mean, I touch the screen to open an app and suddenly the screen opens another app or another option, my question is why this happend? and if that charger doesn't decompose my iPod in any way, the screen, the batery life or something? or when is connected to that charger I dont have to touch the screen? hope anybody here can solve my doubt

    Thanks For your answer, look I post more pics of the charger, yep that have the green dot, so do you think theres no problem about the screen or something?

  • Something was corrupted and now have a Problem with AW Model view ..

    Hi,
    I'm having a problem creating and viewing the model view for an AW using AWM ver 10.2
    I right click on the Analytic workspace and select create analytical workspace from
    the drop down list.. I give it a name and it seems to create it successfully ie it
    appears in the list with an (attached RW) next to it.
    However when i try to expand it .. a message appears .. reading analytic workspace..
    and then I get an error message unable to attach analytic workspace.
    It was working fine in the past and does work against another server..
    Also i can open it in the object view so it must be related to the model view.
    any ideas what I could check to diagnose the problem or what might have been corrupted on the server
    that could cause this ..
    .. the error messages are below
    thanks
    Mike
    oracle.AWXML.AWException: java.lang.NullPointerException
    at oracle.AWXML.AW.readAWDefinitions(AW.java:1341)
    at oracle.olap.awm.dataobject.aw.WorkspaceDO.getModelAW(WorkspaceDO.java:739)
    at oracle.olap.awm.dataobject.aw.WorkspaceDO.getModelAW(WorkspaceDO.java:701)
    at oracle.olap.awm.dataobject.dialog.modelview.ModelerListPanel.showData(ModelerListPanel.java:244)
    at oracle.olap.awm.dataobject.dialog.modelview.ModelerListPanel.<init>(ModelerListPanel.java:86)
    at oracle.olap.awm.app.AwmFrame.selectionChanged(AwmFrame.java:4098)
    at oracle.olap.awm.navigator.Navigator.fireNavigatorEvent(Navigator.java:149)
    at oracle.olap.awm.navigator.Navigator.propertyChange(Navigator.java:129)
    at javax.swing.event.SwingPropertyChangeSupport.firePropertyChange(Unknown Source)
    at javax.swing.event.SwingPropertyChangeSupport.firePropertyChange(Unknown Source)
    at javax.swing.event.SwingPropertyChangeSupport.firePropertyChange(Unknown Source)
    at javax.swing.JComponent.firePropertyChange(Unknown Source)
    at oracle.bali.ewt.dTree.DTree.firePropertyChange(Unknown Source)
    at oracle.bali.ewt.dTree.DTree$SelectionListener.propertyChange(Unknown Source)
    at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
    at oracle.bali.ewt.dTree.DTreeMultipleSelectionManager.firePropertyChange(Unknown Source)
    at oracle.bali.ewt.dTree.DTreeMultipleSelectionManager._setSelection(Unknown Source)
    at oracle.bali.ewt.dTree.DTreeMultipleSelectionManager.selectItem(Unknown Source)
    at oracle.bali.ewt.dTree.DTree._updateSelection(Unknown Source)
    at oracle.bali.ewt.dTree.DTree._handleMouseSelection(Unknown Source)
    at oracle.bali.ewt.dTree.DTree.processMouseEvent(Unknown Source)
    at oracle.olap.awm.navigator.Navigator.processMouseEvent(Navigator.java:509)
    at java.awt.Component.processEvent(Unknown Source)
    at java.awt.Container.processEvent(Unknown Source)
    at oracle.bali.ewt.LWComponent.processEventImpl(Unknown Source)
    at oracle.bali.ewt.dTree.DTree.processEventImpl(Unknown Source)
    at oracle.bali.ewt.LWComponent.processEvent(Unknown Source)
    at java.awt.Component.dispatchEventImpl(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Window.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
    Caused by: java.lang.NullPointerException
    at oracle.AWXML.AW.readAWDefinitions(AW.java:1315)
    ... 41 more

    Did you also check more than one user account to eliminate possible user-specific problems?  Do NOT use the "Guest" account for this test.  If you do not have more than one user account for the testing, create a new one now.  If you need help, here's how to do it in your Mac OS:
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
    •  Then, if you have not already done so, restart Mac and
        try again.  If the iSight still does not work, continue.
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (are you certain that you
       used the correct "reset" procedure?), yours is most likely a
       hardware problem that will require a professional fix.
       Unless you have a current backup, make one now.
      Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    • If you want to try one more thing on your own first,
      use Disk Utility to repair permissions.  Then
      download and apply the latest Combo Update for
      your OS.  Currently, the latest SL Combo is here:
        http://support.apple.com/kb/DL1399
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight. Have your Mac professionally serviced.
    The only other user action I could sugget is to completely reinstall your Mac OS.  If none of these suggestions resolve your trouble, I think you will need an Apple-Authorized Service Provider to fix your cam.
    Message was edited by: EZ Jim

Maybe you are looking for