Problem with Vikings Mobile number (Poland)
[Topic title updated by moderator to be more descriptive. Original topic title was: "Problem with Vikings Mobile number"]
Hello, I can't login Skype Qik for Windows Phone with Vikings Mobile country: Poland. Still getting msg wrong Phone number when try to login. On android i can login without any problems.
Hi, can you specify the first 5 digits of the phone number? For example +48 xxx
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены
Similar Messages
-
Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank youHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I would like to be reached at my iMessage with my mobile number and not my email address
I would like to be reached at my iMessage with my mobile number and not my email address
If you're finding that iMessage & Facetime is showing your email as default & your number is greyed out so can't select it then try signing out of iMessage & Facetime & signing in again.
-
I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy -
I'm having problems with my mobile internet connection
I'm having problems with my mobile internet connection. Wifi works fine. It seems like my connection get lost every tuesday and friday between 11 and 12 am local time (guess it would be between 2 and 3 am Los angeles time for example). The connection won't comeback by itself. I have to turn the phone, iPhone 4s iOS 5.0.1, off and back on again. The connection immediatly works fine after the restart and stays fine for days. I really don't know what to do. My provider doesn't seem to know either. Tried a lot of things, new settings, resets, I even got a new iPhone. Still the same problem however. Richt now I changes the time setting to see it the problem occurs at another time. Btw: the phone doesn't say "no service" and I can send sms messages and make phonecalls. The 3G symbol or the circular symbol is shown next to the name of the provider.
Does somebody has an idea what this might be? Thanks a lot.Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch -
Problem with reached maximum number of connections to database
Dear Experts,
Our Production system was not responding properly last week.
The below was the reply from the Basis team.
"It seems that we have again problem with reached maximum number of connections to database. We have extended this number to 100 this year and now it seems that it’s not enough again. It seems that something is running on Production, which takes over too many connections."
They have increased the number to 200 as a work around.
Do we have any means to find out, which component or application is causing the issue.
Please advise me if any better way is available to correct the issue.
Please see the below trace.
From default trace:
======
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.R
esourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to DB or EIS is reached. You
can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable. 3) Connections ar
e not enough for current load.
at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:60)
at com.sap.security.core.persistence.datasource.imp.J2EEConnectionPool.getConnection(J2EEConnectionPool.java:205)
... 61 more
Caused by: javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to
DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unr
eachable. 3) Connections are not enough for current load.
at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:230)
at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:343)
at com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:52)
... 62 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException is thrown by the pooled connection: com.sap.sql.log.OpenSQLException: No c
onnection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are currently waiting. The connection pool size might
need to be adjusted.
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:192)
at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:221)
... 65 more
Caused by: com.sap.sql.log.OpenSQLException: No connection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are
currently waiting. The connection pool size might need to be adjusted.
======
Thanks and Kind Regards,
JelbinStop all instances(including DB) and start again, Hope it should work.
It may happened that jar has not been synchronized with the database and may be version mismatch with the java.
719778 - Data Source fails to return connection
1650472 - Transactions are interrupted due to database connection periodically failing to establish
1138877 - How to Deploy External Drivers JDBC/JMS Adapters
Change the connection pool so that it can connect to DB as per the note 719778
Regards
Vijay Kalluri -
Problem with material master number range
Hi,
we have a problem with the material number range when stop the transaction of creation a material master data (MM01) the system has a jump of number range.
Example -> while creating a new material master the system gives me a number preview (46) but if I stop the transanction without save the master data the system doesn't give me the number 46 in the next master data but give me the next number 8in this example 47).
It there a way for not have this jump of number range?
Thanks!
GaetanoHi Gaetano,
This ia a standard thing..even I have experienced it.
Regards,
Chiranjib -
Hi I have a problem with my licence number for Lightroom
Hi I have a problem with my licence number for Lightroom, has been forced to re-install lightroom again but, have downloaded a trial version of adobe but now works license number are not, there are some who can help me with what is going wrong. Thanks Henrik
Download Lightroom 5 from Product updates and install, use your serial number
-
Problems with Vodafone Mobile Card (Huawei E220)
I have a Vodafone Mobile Card with the latest firmaware and with the latest software on the Mac (the official software from Vodafone, kinda like launch2net) and all worked fine in Tiger, but now in Leopard, I did a clean install, installed the Vodafone software, it works fine the first time I use it and then, after unplugging, when I use it again it never works.
The Vodafone Mobile Connect launches, accepts the password, measures the signal but when I tell it to activate, it just hangs and I have to force quit. Sometimes, after force quitting I can still do the normal connection (choosing modem and connecting) but this only works sometimes.
Does anybody have this problem also? How can I fix it?I am experiencing a similar problem with Vodafone Mobile Connect 3G (Version 2.08.01.00), however, I am not running OS 10.5. The modem was working fine on both of my computers for about 3 weeks, but now it does not work on my Macbook while it continues to work on my old iMac. When I launch VMC it hangs before the activation window appears and I have to either force quit or it quits itself; no error message window appears. Both computers have the same recent software updates from Apple. I am going to do a clean install of the old software on the Macbook, but I am nervous that when I unplug the modem from my iMac, the same problem will occur on it and then I will be without a connection.
I downloaded VMC software (in English) from here:
http://www.business.vodafone.com -
A problem with WAAS mobile client
The customer has a problem with WAAS mobile client. When he disabled WAAS mobile client - all is working, but http is not working.:-( On the server the accelerated networks are configured.The browser send the http request, but the response is not received:-( For other clients it is working. Thank you for help.
I have WAAS mobile server version 3.4.0.1460 on the Windows2003 server with SP1. Client OS is Windows XP. All clients who use WAAS mobile client have WinXP on their notebooks. All clients are on the same network. This client sees this problem when the waas client is active, disabled, and for now when the waas mobile client is uninstalled - it seems like waas mobile client changed registers for IE or FireFox - so all http answers are redirected to nonexisting waas mobile client:-(
Thank you
Roman -
I've also a problem with itunes and quick time: i've re-installed them about an hour ago and now i can't open them! An error screen appear with error number 7 (windows 998).
Ah, i've windows xp.
PLEASE HELP ME!Found the answer to my question after posting (in related discussions)
https://discussions.apple.com/message/12331666#12331666
Will call Apple Care as soon as I can. -
Problem with IN OUT Number, OUT RefCursor for EF Model StoredProcedure call
When I call a stored procedure using the EF Model and implicit binding via App.config which has three parameters i.e. 'IN Number', 'IN OUT Number' and 'OUT sys_refcursor', the 'IN OUT Number' is not set correctly on return from the procedure.
The 'IN OUT Number' is for an error code and is set to 12345 on input and is then set to 54321 by stored proceedure for return.
The correct value is returned when the call is via OracleCommand using implicit binding via App.config but remains unchanged when the call is via EF Model and implicit binding via App.config.
The ODP documentaion says you cannot have two OUT RefCursors when using EF Model but does not say you cannot have OUT RefCursor and other non-RefCursor OUT parameters.
The idea behind this type of procedure is to have multiple input parameters to configure and filter the stored procedure and an output result set that consists of an error code and a collection of result rows in a RefCursor.
I am using 11g R2 database and ODP 11g Release 2 (11.2.0.2.30) and ODAC Entity Framework beta.
The query uses Scott/tiger schema with parameters department code, error code and list of employees for department.
code:
PROCEDURE TEST_PARAMETERS
DEPT IN NUMBER,
ERROR_CODE IN OUT NUMBER,
DEPT_EMPLOYEES OUT sys_refcursor
AS
BEGIN
DBMS_OUTPUT.PUT_LINE('DEPT = [' || DEPT || ']');
DBMS_OUTPUT.PUT_LINE('ERROR_CODE = [' || ERROR_CODE || ']');
OPEN DEPT_EMPLOYEES for SELECT empno, ename from emp where deptno = DEPT;
-- set ERROR_CODE for return
ERROR_CODE := 54321;
END TEST_PARAMETERS;
The App.config for implicit RefCursor binding is as follows ...
<oracle.dataaccess.client>
<settings>
<add name="SCOTT.TEST_PARAMETERS.RefCursor.DEPT_EMPLOYEES"
value="implicitRefCursor bindinfo='mode=Output'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.0"
value="implicitRefCursor metadata='ColumnName=EMPNO;
BaseColumnName=EMPNO;BaseSchemaName=SCOTT;BaseTableName=EMP;
NATIVE_DATA_TYPE=number;ProviderType=Int32;
PROVIDER_DB_TYPE=Int32;DataType=System.Int32;
ColumnSize=4;NumericPrecision=10;
NumericScale=3;AllowDBNull=false;IsKey=true'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.1"
value="implicitRefCursor metadata='ColumnName=ENAME;
BaseColumnName=ENAME;BaseSchemaName=SCOTT;BaseTableName=EMP;
NATIVE_DATA_TYPE=varchar2;ProviderType=Varchar2;
PROVIDER_DB_TYPE=String;DataType=System.String;
ColumnSize=10;AllowDBNull=true'" />
</settings>
</oracle.dataaccess.client>
When the call is via OracleCommand both outputs are correct i.e. ERROR_CODE gets set to 54321 and the correct emplyees for department 10 are returned
code:
private void TestParametersViaOracleCommand()
try
string constr = "DATA SOURCE=ORCL;PASSWORD=tiger;PERSIST SECURITY INFO=True;USER ID=SCOTT";
OracleConnection con = new OracleConnection(constr);
con.Open();
OracleCommand cmd = con.CreateCommand();
OracleDataAdapter adapter = new OracleDataAdapter(cmd);
DataSet ds = new DataSet();
cmd = con.CreateCommand();
cmd.CommandText = "SCOTT.TEST_PARAMETERS";
cmd.CommandType = CommandType.StoredProcedure;
cmd.BindByName = true;
OracleParameter dept = cmd.Parameters.Add("DEPT",
OracleDbType.Int32,
ParameterDirection.Input);
dept.Value = 10;
OracleParameter errorCode = cmd.Parameters.Add("ERROR_CODE",
OracleDbType.Int32,
ParameterDirection.InputOutput);
errorCode.Value = 12345;
// RefCursor output parameter implicitly bound via App.Config
adapter = new OracleDataAdapter(cmd);
adapter.Fill(ds);
// should be 54321 and is ...
Console.WriteLine("after call errorCode.Value = " + errorCode.Value);
Console.WriteLine("list size = {0}", ds.Tables[0].Rows.Count);
// only one table
DataTable deptEmployeesTable = ds.Tables[0];
for (int ii = 0; ii < deptEmployeesTable.Rows.Count; ++ii)
DataRow row = deptEmployeesTable.Rows[ii];
Console.WriteLine("EMPNO: " + row[0] + "; ENAME: " + row[1]);
catch (Exception ex)
// Output the message
Console.WriteLine(ex.Message);
if (ex.InnerException != null)
// If any details are available regarding
// errors in the app.config, print them out
Console.WriteLine(ex.InnerException.Message);
if (ex.InnerException.InnerException != null)
Console.WriteLine(
ex.InnerException.InnerException.Message);
output:
before call errorCode.Value = 12345
after call errorCode.Value = 54321 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
However when call is via EF Model the correct employees are returned but the ERROR_CODE parameter is unchanged on return.
code:
private void TestParametersViaEFModel()
var context = new ScottEntities();
Decimal dept = 10;
ObjectParameter errorCodeParameter = new ObjectParameter("ERROR_CODE", typeof(decimal));
errorCodeParameter.Value = 12345;
Console.WriteLine("before call errorCodeParameter.Value = " + errorCodeParameter.Value);
// RefCursor output parameter implicitly bound via App.Config
var queryResult = context.TestParameters(dept, errorCodeParameter);
// should be 54321 and is ...
Console.WriteLine("after call errorCodeParameter.Value = " + errorCodeParameter.Value + " (should be 54321!)");
List<TestParameters_Result> deptEmployeesList = queryResult.ToList();
Console.WriteLine("list size = {0}", deptEmployeesList.Count);
for (int ii = 0; ii < deptEmployeesList.Count; ++ii)
TestParameters_Result result = deptEmployeesList[ii];
Console.WriteLine("EMPNO: " + result.EMPNO + "; ENAME: " + result.ENAME);
output:
after call errorCodeParameter.Value = 12345 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
errorCodeParameter.Value IS NOT CORRECTLY RETURNED!
If there is no RefCursor then both outputs are identical i.e. the parameters are being passed in correctly and the problem is not with the 'IN OUT' parameter. Also same thing is true if ERROR_CODE is made an OUT parameter. Also tried changing the position of the parameter in the list but still get same problem i.e. works when OracleCommand but not when EF Model. Also note that the RefCursor results are correct for both types of call i.e. it is just a problem with the value of the 'IN OUT ERROR_CODE' parameter.
I have also enabled debug stepping from Visual Studio 2010 into Oracle PL/SQL as described in
"http://st-curriculum.oracle.com/obe/db/hol08/dotnet/debugging/debugging_otn.htm"
and have verified by inspection that the correct values are being passed into the stored procedure and that the stored procedure is definitely setting the ERROR_CODE to 54321 prior to return.
Most of our stored procedures have these type of parameters i.e. several IN params to configure the work of the stored procedure, an OUT NUMBER parameter for the Error_Code if any and a RefCursor for the result list.
Is this a bug or a feature? Am I doing something wrong?Just to clarify ....
If the ERROR_CODE parameter is made an 'OUT' parameter instead of an 'IN OUT' parameter the correct return value is given for the OracleCommand invocation but the WRONG value is still returned for the EF Model invocation i.e. just changing the parameter from 'IN OUT' to just 'OUT' does not fix the problem. -
Apple's xpress port has a problem with Apogee mobile card...
Who can I speak with about this problem? I tried here, I tried Apple support ? Nobody can answer my question about this problem? I purchased a new MacBook Pro in January to use with Apogee mobile card but the xpress port in MacBook Pro has a major problem because of it's new design? Please can someone convey were to get help in Apple or a least an answer..Please someone.........
Hi,
What I mean is the microphone jack on your x-fi notebook. since you are saying you can hear yourself when you switch the recording source to microphone, I would assume that you have plugged in a microphone into your x-fi notebook. You should check if there is a microphone control on your volume mixer and whether it is unmuted if there is one. There are many sound card which allows for the microphone audio to be heard on the speaker output if the microphone source is unmuted.
Message Edited by flipflop on 03-29-2009 09:03 [email protected] -
Problem with field "batch number" and table "et_item" at BBP_CONF_CHANGE
Hi experts!,
I have a problem when I use the badi BBP_DOC_CHANGE_BADI and with the method BBP_CONF_CHANGE.
I want to fill the field "batch number" at web SRM with the PO number, I thought to write it at suitable or appropriate field at table "et_item" but this table has not any similar field which I can write it.
Thanks in advance.
Best Regards.Hello,
we cannot fill the BATCH field because it is not available in the table ET_ITEM in the method BBP_CONF_CHANGE.
Do you know how can we fill a default value in this field when the user is creating or modifying a confirmation item?
Thank you.
Best regards. -
please assist in fixing my issue on calls. I made a subscrption on calling landline and mobile to India . i am trying to call to india mobile number from UAE but it just keep on showing ringing or connecting with out any ringtone and after words calls get drops automatically.
i tried from my iphone but situation is same even after re-installing the app.
please check and update me as soon as possible. Rayis arafathHello and welcome to the Skype Community.
The UAE blocks all VoIP outbound traffic including Skype. Try accessing the internet using a VPN.
Maybe you are looking for
-
Drop down list of values for a field in ALV rpt within a BADI
Hi, I need help on this issue. TCODE LI21 is used to clear the differences in IM. The business now wants to prompt for a reason code before they can post a new material document for this clearing. I have create an implementation in BADI LE_WM_INV_W
-
Issue with unbinding of configurations from old jars
Hi, We have a setup where we deploy some of the business services and configurations (Java code) into CQ5 so that they can be managed through Apache console. We are facing a problem where if we deploy a new version of the jar, the configurations stil
-
Status on RE:Reporting after many forte tasks run
-
I purchased a video and it keeps telling me "cannot download at this time" but it has been charged on my itunes card
-
After the latest iOS update, camera went dead, black screen on both rear and front cameras when using Apple Camera occasionally can capture video but photo is dead. Not a hardware issue I suppose, since it works just fine with Google's SnapSeed App.