Problem with Vista x64 and Audible in iTunes

I've made a clean install of Vista x64.
Installed iTunes and started it off reloading my music. When it came to .aa files from Audible it prompted me for my audible login - which I gave. It then rejected my login and skipped all my audible stuff.
I've now tried several times to completely wipe iTunes from my system and reinstall it (even tracking down all the config stuff it installs and doesn't remove on removal) and still have no luck. I've also tried the vista permissions fix.
Problem is iTunes seems to think it's authorized on Audible as I have a 'DeAuthorize Audible account' option under advanced. If I enter my login under this, or when prompted when trying to add an Audible file I get a "Could not authorize this computer because an error occurred (-44012)" error message.
Anybody have any clue about this, because google hasn't.

I believe that's just to fix permissions if you can't play back music you've purchased from the music store.
I did try running it anyway, just to see if it made any difference, it didn't.

Similar Messages

T61 - problem with Vista x64 NVS 140M drivers

Hi!
I have problems with Vista x64 and NVS 140M drivers. Thing is that if I install them, everything will be slideshow, even the audio shutters quite bad and CPU is constantly over 45%. I have tried different driver versions but nothing has helped yet. Any ideas?
I wonder if anyone has the old 7.15.11.0129 driver and could send it to me? Maybe that would help.

Try the following test:
- Go to Vista Sound Control Panel to view the S/PDIF out properties.
- Click on the Supported Format tab page, select Dolby Digital and click Test.
Is the test OK?

Acrobat Problem with Vista X64 OLE calls

Acrobat Problem with Vista X64 OLE calls - CreateObject("AcroExch.AVDoc") does NOT open its window in the CreateObject("AcroExch.App") - but opens a new (invisible) window. Works correctly in XP x64 and 32 bit Vista - happens with Acrobat v8 and v9.

Again, I contend that something changed between 8.1.2 and 8.1.3.
refer to http://www.adobeforums.com/webx/.59b6fe7c
To show the viewer, use the show method after the document is opened.
In 8.1.2 you did not have to perform this extra step.

Stability problems with Win7 x64 and Boot Camp 3.1...

Before I was running win 7 with Boot Camp 3.0 and On top of that I installed my Chipset and Graphics from Nvidias Website. System was running without any major problems.
Now I have win7 and BootCamp 3.1 and the laptop runs like crap... System freezes sometimes only for a minute most of the time I need to hold power button.
The last time I has ScanDisk start on me and start checking. it found about 200 missing files some unindexed and MFT bitmap was repaired...
Do not know why, I'm unable to figure out what was causing that.
Currently I have win7 x86 with bootcamp 3.1 installed and The system works good.
I think there is an issue with the 3.1 x64 driver package.
If anyone has any Ideas on what I can do to figure out why the system runs so unpredictable with 3.1 x64 drivers installed. I'm whiling to experiment and reinstall win7 x64 as many times as needed so i can send an error report to apple to get this issue fixed.

Wow, i've been running windows 7 64 bit in boot camp since I got my copy as a beta tester in July and never had any issues like you're describing. Boot camp 3.0 worked fine (other than the light in the audio port and minimal touchpad control, and the still present inability to dim the screen dynamically based on brightness around me). And I've had no problems with boot camp 3.1 so far. In the previous BC versions, I went to the nvidia site and downloaded whatever the current driver was for the video, but nothing specific for the chipset. With 3.1 I haven't done even that, just using what the boot camp update installed. Have you tried it with just the BC 3.1 drivers, not getting anything extra from Nvidia or anyone, just to see what happens from that point first?
About the only time I had any issues with diskchecking is when I accidentally close fusion and it abends my windows session. I make a point then of booting and telling it to ignore the disk check, editing the registry to reset the flag so it doesn't do it, then just run a disk check from within windows telling it NOT to fix anything, so that it can verify it's clean. I found the normal disk check in the preboot environment is horrendous on the MBP, takes me literally hours to run through despite it never finding anything to fix.

Problems with Windows x64 and Sound blaster l

Hey, I have this issue with my sound blaster li've. I've just recently installed Windows x64 and now I'm having issues with my sound. It creates this weird echo sound with a small static sound everytime a game. Prior to loading any applications, the sound is just fine. I had this issue when I had Windows XP but I installed the Li've applications and was able stop that. But I can't install that application for Windows x64. Is there any solution to this? Thanks in advance.

kennydo you have aim or msn or anything where we can talk, because i have relati'vely same stuff as you. Thanks very much

Problems with Vista 64b and Scrollpoint Optical Mouse

I have a desktop system with a Scrollpoint Optical Mouse, 33L3250, and with the latest Vista maintenance, the Mouse seems to be acting a bit funky. The mouse pointer will be going along fine, and then just stops for a couple of seconds.
I tried to go and find the latest drivers:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-66913
as near as I can make out is the latest. Shows:
Version: 5.18 Release Date: 2009/09/11
but this does not seem to recognize the Mouse, still using parts of the Microsoft Mouse driver. Mouse is plugged in via PS2 at the moment. When I go look at the programs installed, I cannot find anything from Lenovo or IBM related to the mouse, so I'm not sure if running Setup.exe from the appropriate directory worked (or, for that matter, how to uninstall it). What I do see is MouseSuite 5.18 on the Mouse properties, last (right-most tab). But the first tab kind of acts up, blank options, etc.
Has anyone else seen this problem, worked through it? Any later drivers I should be trying to use?

OK, tried a reinstall, got a little further:
Mouse Suite no shows up on the uninstall list (Mouse Suite, no manufacturer, no version, unfortunately, but does show a 1/3 date)
When I go into Control Panel/Hardware and Sound/Mouse, I see some anomalies:
Buttons Tab: Mouse: field is blank, Button: Function: same, pull downs also blank
Last tab shows Lenovo Mouse Suite, Version 5.18, etc.
However, any time I press OK on one of the screens, I get a Windows error:
Windows host process (Rundll32) has stopped working.
And then the whole thing goes down.
Looking at the application error messages, I see:
Faulting application rundll32.exe, version 6.0.6000.16386, time stamp 0x4549bb52, faulting module kernel32.dll, version 6.0.6002.18005, time stamp 0x49e041d1, exception code 0xc0000005, fault offset 0x0000000000012575, process id 0x8b8, application start time 0x01ca8c91ff6985bc
I should note that the Hardware is still showing Microsoft PS/2 mouse, and the driver is still showing Microsoft 6/21/2006 6.0.6001.18000
c:\Windows\system32\DRIVERS\i8042prt.sys
c:\Windows\system32\DRIVERS\mouclass.sys
which kind of looks to me like the Lenovo install failed to update those (or conversely, on reboot, Vista 64 reverted). So not sure what to do next.

DD Live/DTS Connect problem with Vista x64 on X-Fi Champion Fatality

? Ok,
I have purchased and installed this software. ?Now, if I try to enable it in the encoder tab, I get the following,
"The audio device is busy now. ?Please stop playback and try again.)
I have tried a clean start of Windows, reinstalled the software, ensured that my drivers are updated, and am definitely running SP.
Here is my system specs.
Asus Rampage II Extreme Motherboard
Intel i7 920 CPU
6GB DDR3 (Corsair Dominator i7 800Mhz)
XFX NVidia GTX 280 (2xSLI) - Dedicated Power
SoundBlaster Fatality Platinum Champion
Logitech Z-5500 speakers
Any ideas on what I can do hereI am not going to reinstall my OS, since this is a very fresh install as it is (computer was built less than a month ago). ?None of the components are grey market. ?That is, they call came in retail boxes, including the Sound Blaster. ?
Thanks!?

Try the following test:
- Go to Vista Sound Control Panel to view the S/PDIF out properties.
- Click on the Supported Format tab page, select Dolby Digital and click Test.
Is the test OK?

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact mean

My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store. What does that mean please?

Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.

HT4972 I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrad

I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?

try rebooting your computer.

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

Running PC with W7 x64. Upgrdaed to iTunes 10.7. Upgraded iPhone 4s to IOS 6. Caqnnot backup. iTunes says session cannot be started. Does not recognize apps on device. Device shoes up on WiFi then disappears. Does not work either on USB. ITouch and iPad .

After upgeading to iTunes 10.7 on my PC with W7 x64 and IOS 6 on my iPhone 4s, I cannot backup. It says sesson cannot be started. Also cannot recognize apps on iPhone. Further, with WiFi and powered on, the device apperas briefly in iTunes then disappears. Same for iTouch and iPad with IOS 5. How do I resove this? More importantly, how does Apple resolve it? Thanks. . JAD.

AphexTwin wrote:
- no Apple input?
Of course not. Didn't you bother to read the TOU of this forum? This is a USER TO USER technical support forum. Apple doesn't post here.

I had a problem with my iphone and had to restore and now i have lost all music from itunes any way to get it back ?

i had a problem with my iphone and had to restore and now i have lost all music from itunes any way to get it back ?

It should ne in itunes on your computer and included in your regular backup of your computer.
If for some reason you have failed to backup your music, then - in the U.S only - you can get previous itunes purchases from the beta version of icloud. Open itunes store, click Purchased, under Quick Links.

Problem with Vista x64 and Audible in iTunes

Similar Messages

Maybe you are looking for