Problem with vmware fusion 3.1.3 after upgrade to Lion

Greetings,
I have some problems with my vmware fusion 3.1.1 after my update to OS X v10.7.
i used a MacBook pro 17'' half a year old.
I used VMWare Fusion 3.1.3 and bootcamp to. I have make no backup bevore i upgrade.
The path of my virtual machine couldn't be found and so the virtual maschine didn't start after this upgrade.
I hope that i musn't reinstall my virtual Windows 7 machine.
I'am searching for a resulution and found this:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=display KC&externalId=1003483
Cannot open the disk '/Users/<User Name>/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/dev/disk0s3/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.
But i would save the virtual machine bevor i reinstall VMWare Fusion 3.1.3.
Have anyone a idea how i found my virtual machine.
Greetings from Germany
Kim

According to: http://roaringapps.com/app:61 Version 3.1.3 has issues with Lion. There is a 2011 beta that works better.

Similar Messages

Problem with VMWare Fusion and OS 10.6.8 and Safari

when i try to open Safari from say a tracking number or even if i try to install an extension for safari from a download by double clicking it in my downloads folder instead of my mac version of safari opening it opens safari in vmware fusion this just started a few days ago i haven't updated anything i'm using safari 5.1 on my mac and this is a imac intel 2.8ghz intel 2 dual processor
please help as this is causing me a lot of problems
thanks Mike

It's not a big concern, apparantly the assocaition what program opens that file when you click on it is off kilter.
It's surely a VMFusion issue as they tweak things a bit in OS X as to be able to merge OSX and the guest operating together for a more seamless experience.
Perhaps you opened the file once in Safari in VMFusion and now it has that association, or when there was a menu selection you picked the wrong one by accident.
Register on get on the VM forums and post your question there and they can assist, it's a easy fix but it escapes me.
I run VMFusion too and noticed this ability once when I had OS's merged, but I don't merge operating systems anymore, rather I prefer to keep each one seperate.
Good luck, ask on VM's forums and you'll be fine.

[K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

Hello everyone!
I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
Can you tell me what's wrong?
Thanks, bartull@
PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

I think that the problem may have been caused by flashing either with liveupdate or with winflash. I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash. My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
If that works, then reflash to the bios you tried before with the same procedure. Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
Good luck.

Problem with home button and "messages" app after upgrade to iOS 4.1

Hello,
I have noticed two interesting problems with my iPhone 4. I am not sure if it is in conjunction with the upgrade to the iOS 4.1 software, but I did not notice the problem prior to this. Both of these problems are very odd and are hit or miss. I have tried restoring and the problem is still present. Also, since both problems have presented at the same time, that is why I am starting to believe it is not hardware...
Problem 1: The home button has become considerably unresponsive. This is not all the time, but it does happen a lot. Sometimes it won't work for about 5-8 clicks and I have to use the power button to access the phone.
Problem 2: When composing a new text message the cursor would always default into the "To:" section of the app which allows you to easily type what contact you are trying to message. However, I am having the issue now occasionally when I am in the messages app and select to compose a new text message that the cursor now defaults into the chat box (where you type your actual message). This is very annoying and I know that this is not the intended behavior of this.
Please let me know if anyone has experienced similar issues and can provide me with some feedback.

I have not experienced the same.
I have tried restoring and the problem is still present.
You restored from your iPhone's backup, or as a new iPhone or not from your iPhone's backup?
If whatever software problem is causing this is included with your iPhone's backup, restoring from the backup will also restore the problem.
Try restoring as a new iPhone or not from your iPhone's backup to see if this makes any difference. If not, more than likely your iPhone has a hardware problem.

Problem with FusionFX template in IE/Chrome after upgrade to 11.1.1.6.2

Hi,
just a quick check to see if anyone else have experienced the same error after upgrading OBIEE to version 11.1.1.6.2.
All dashboards using the "FusionFX" is now missing two images at the top left of the screen (under the tab title heading) in run time view.
The html code generated is:
<table cellspacing="0" cellpadding="0" border="0" class="HeaderSecondBar HeaderSecondBarPadding" role="presentation">...</table>
<div class="HeaderDiv">
<img src="Missing_dbd_center_gradient.png" alt class="HeaderBackground">
<img src="Missing_header_topshadow.png" alt class="HeaderTopShadow">
</div>The 2 png-files are shown as missing images in both Internet Explorer 9 and Chrome, but no error in Firefox - everything fine there!
Checking the server directory \Oracle\product\middleware\Oracle_BI1\bifoundation\web\app\res\sk_FusionFX\b_mozilla_4\
shows that there indeed are two png-files named dbd_center_gradient.png and header_topshadow.png.
Have anyone seen this?
Even better; is there a simple way to fix it?
Our company intranet is based on Internet Explorer 9, so Firefox is no solution unfortunately.
Regards,
-Haakon-

Just upgraded to 11.1.1.6.5 - and this problem is STILL NOT addressed by Oracle....
I realize they don't have much love for Microsoft nor Google, but it would be wise to consider their customers trying to use their tools on other platforms than *nix and Mozilla...
Sorry, just needed to let out some steam after downloading and patching for most of the day....

Problems with Windows Live Mail send/recieve after upgrading Firefox

I recently upgraded Firefox and since then I get this:
An unknown error has occurred.
Server: 'smtp.frontier.com'
Windows Live Mail Error ID: 0x80070057
Protocol: SMTP
Port: 25
Secure(SSL): No

have you tried using imap instead?
if you can access your email from the web page then sounds more like a problem with windows live mail and not your BT account
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Problem with USER as default on column after upgrade to 10.2

Greetings,
We recently upgraded to 10.2 from 10.1, running on microsoft 32 bit (Windows 2003).
We have been using the same DB structure since Oracle 7.x and have not had a problem using USER as a default on a varchar2(30) column until now. The column value is being left NULL.
If I set the default to rtrim(USER) then the column is correctly filled with the logged in user.
If I create a new table with the same size column and set USER as the default it works correctly.
If I set it in the before trigger it works.
If I set the value of the column to USER in the insert it does NOT work, it leaves it NULL.
I have looked at user_tab_columns between the column not working and the newly created table that is working and see no difference.
Can anyone give me some suggestions on what else to look for? It feels like a problem with having brought the tables over from a previous version of Oracle.
Thanks in advance for any help.
M. James

No problem here on 10.2.0.3:
michaels> create table t (a integer, b varchar2(30) default user)
Table created.
michaels> insert into t (a) values (1)
1 row created.
michaels> insert into t (a) values (1)
1 row created.
michaels> select * from t
         A B
         1 SCOTT
         1 SCOTT
2 rows selected.
michaels> select * from v$version
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE     10.2.0.3.0     Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production

Problems with VMWare Fusion after MacOS Upgrade

Prior to upgrading yesteday I was able to use "open with" to select programs that were installed in either my Win 7 or XP VM on VMFusion. After the upgrade no longer set any of the Win apps. This is a real pain a now i have to open Fusion, Win 7 and use the Office 2010 app to open the file.
Has any one else had this problem? Is there something I can do to fix this?

Hi cjpembo,
my Card looks like:
01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
If I don't specify any module parameters, the tuner type 0 is selected.
ACPI: PCI interrupt for device 0000:01:07.0 disabled
tda9887 2-0043: destroying instance
tuner-simple 2-0061: destroying instance
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
cx88[0]: warning: unknown hauppauge model #0
cx88[0]: hauppauge eeprom: model=0
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
Badcel
Last edited by badcel (2008-08-24 09:46:18)

Problems with accessing collections in 3.0 after upgrade

Hello ApEx Team,
I noticed that my demo on apex.oracle.com related to the XML charts doesn't work properly
any more. The chart is there but no values are showing up. The problem has something to
do with accessing collections - it seems no data is found by the procedure looping through
the generated values. Since the chart values get rendered by executing the package
procedure through the browser, and not from the user session, I was using the
following code to get access to the collections:
      HTMLDB_CUSTOM_AUTH.define_user_session (app_user_in, session_id_in);
      HTMLDB_APPLICATION.g_flow_id := app_id_in;
      HTMLDB_CUSTOM_AUTH.post_login (app_user_in,
                                     session_id_in,
                                     app_id_in || ':' || page_id_in
                                    );Now, it seems this part doesn't work and it did in all previous versions. The collection
is there. I checked that. How do I go arrond this problem?
The (not working) demo can be found here:
http://htmldb.oracle.com/pls/otn/f?p=31517:74
Denes Kubicek

Joel,
Thanks for responding. You confirmed what I previously stated. The following worked and
works for all versions before 3.0:
BEGIN
   HTMLDB_CUSTOM_AUTH.define_user_session (:app_user_in, :session_id_in);
   HTMLDB_APPLICATION.g_flow_id := :app_id_in;
   HTMLDB_CUSTOM_AUTH.post_login (:app_user_in,
                                  :session_id_in,
                                  :app_id_in || ':' || :page_id_in
   FOR c IN (SELECT c001, c002
               FROM htmldb_collections
              WHERE collection_name = :coll_name_in)
   LOOP
      htp.p(c.c001 || ', ' || c.c002);
   END LOOP;
END;For 3.0 it doesn't return collection values. Selecting from collection will return
ORA-01403: no data found. This means that something must have changed. Please
correct me if I'm wrong.
A question: is this the right way to access collections from a background process?
If not (it obviously isn't the right way for 3.0), then what is the right way?
I could create a package collection instead of using apex_collections. But I think it is not
neccessary and we should find a way to avoid it if possible.
Thanks again for your help.
Denes Kubicek

Problems with 10.3.9 operating system after upgrades

I recently downloaded a system update and am having problems.
I can no longer print. Printer error.
Also, I tried to download an HP Laserjet 5000 driver to see if that would fix it, and I couldn't install, as I tried to install with my system password and it said I need an Adminstrator level or higher to install???
Any help please.
[email protected]
Powerbook 17 Mac OS X (10.3.9)

My Dad (age 86) has encountered what I am almost positive
is this precise problem. He downloaded some kind of
security patch around Jan 26 and all his (3) printers
got disabled. He is running MacOS 10.3.9 on a PPC
Mac. I've been through the article on creating
/var/spool/cups with him. We've done "Repair
Disk Permissions" in Disk Utility. It still doesn't
work. When he does "Add Printer", he gets all the
way through to the step of manually selecting the
Printer Description and then he gets
server-error-service-unavailable
Is there a way to get the equivalent of the Tiger
feature "Reset printing system" in Printer Setup
on 10.3.9? I think that's what he needs to do.
Are the steps documented anywhere?
Or does anyone have other suggestions? I thought
about running "Repair Disk" in Disk Utility, but
my conclusion from reading the documentation is
that this is morally equivalent to "fsck" in
regular Unix. That is, it only checks the
structural integrity of the file system itself.
It has no idea of the files required by a particular
subsystem.
The only other thing I can think of to do is to
reinstall 10.3.
Regards,
Paul
MacBook Core2 Duo Mac OS X (10.4.8)
MacBook Core2 Duo Mac OS X (10.4.8)

Problems with Hotspot, EDGE, and 3G internet after upgraded to iOS 4.3

I just upgraded my iPhone 3GS to iOS version 4.3 , but after I installed it, the Personal Hotspot badge on Settings>General>Network appears, but it keeps at the "loading circle" sign (the same one when the iPhone is turning off). Besides that I realized that my 3G internet is not working, neither EDGE. none of the 3G or EDGE icons appears next to my carrier bundle, how it usually do. Wifi is working though. I tried to solve the problem restoring the iPhone, but the problem persisted even after the restore. What's happening to my iPhone 3GS?

Hi man!
have the same equipment and the same problem, who is your mobile operator?
I'm from Chile and my operator is Movistar, I think they blocked the service hotspots.
Best regards

Problems with HTML in dynamic reports template after upgrade to 3.1

Hi, we just upgraded from APEX 2 to 3.1. W ehave an application that has a report template as follows:
<img src="&P1_LOGO." border="0" alt="Home" />
<div>
<table align="LEFT">
<tr>
<td align="LEFT" width=500><font size="-2"><P>&P1_FROM_ADDRESS.</P></td>
<td align="LEFT" width=175><font size="-2"><P>&P1_REMIT_TO.</P></td>
</tr>
</table>
<BR></BR>
#BOX_BODY#
The item P1_REMIT_TO is set to an address using a PL/SQL computation. It has HTML tags such as <B> and <BR> in it. In 2.0 this displayed fine. In 3.1 it does not interpret the HTML tags, so it sshows up with the HTML tags in the text.
Any idea what may have changed and how to fix this?

Tor,
You're in Tampa huh? Are you a member of the SOUG?
Issues like browser alignment are always easiest to figure out with an example. Post an example app on apex.oracle.com and provide some developer credentials with which we can get in "under the hood".
Regards,
Dan
http://danielmcghan.us/
http://sourceforge.net/projects/tapigen/

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

Split screen software of LG ultra wide monitor won't start with windows 7 installed with VMWare Fusion

I am using split screen sofware of LG but it is not working for me with vmware fusion 7. Is this a known problem? I am using an ultra wide monitor of LG (29um65), and installed windows 7 on my mac, by using VMware Fusion. But the software won't work of LG. It won't start. LG can't help me, because normally the software is working by using windows 7 on a windows pc. I got it also working on a mac , when I used other virtual software as Virtualbox VM, but it seems not to work with vmware fusion 7. Can somebody help me with this problem?

yes, I think you are right, but I used virtual box in the past, and had no problem with the LG software, so it has also to do wit VMWare Fusion I think.
Never the less we still don't have a solution :-)

W530 Num Lock problems with VMWare

All, I am having a major problem with VMWare and the W530 "Num Lock". When I move the cursor into the VMWare window a message comes on say "NUM LOCK: ON" when I move it out of the VMWare window I see message "NUM LOCK: OFF". I do not have any key on the keyboard to disable Num Locl. There are utilities I can run in the SUSE VMWare image to capture the key binding and remap, but I do not have anyway of turning Num Lock on or off to capture
the key binding.
Suggestions ?
Solved!
Go to Solution.

Hello and welcome,
A couple of things you might try. Don't know if they'll work on your W. They do work on some other Lenovo machines.
Plug in a USB keyboard that has numlock. Use that and see if it sticks after reboot.
Use the on-screen keyboard. Click "options" and enable numeric keypad. That should add a keypad and NUMLOCK key to the on-screen keyboard. Use that. See if it works - and if it sticks.
(Windows 7) Start -> Accessories -> Ease of Access -> On-Screen Keyboard.
A little more detail here: http://www.beezmo.com/geezblog/?p=259
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem with vmware fusion 3.1.3 after upgrade to Lion

Similar Messages

Maybe you are looking for