Problem with voice control

Hello. I'm just wondering if anyone else has had issues with their voice control? Any time my headphones are in and I move them slightly or put it in my pocket it turns on voice control and pauses my music. Even if I don't touch anything it will open up voice control and turn on music when my headphones are plugged in. Or i'll put in my pocket on screen lock and the VSD will open contacts or applications. Is there a way to deactivate voice control? I have switched the settings so it won't be opened with the mute button, I made it so it's 'voice dialing only' and that didn't change anything. This is annoying because I can't listen to music on my phone or do anything for that matter if the headphones are plugged in.

Same here... it's so annoying -.-
Need heeeeelp

Similar Messages

Problems with voice memo

Hey,
i've got a problem with voice memos. When i record them they are very quiet. It's something different when i record sound via video or use the headphones to record a voice memo. Then they have a normal volume. Any ideas?
Got an iPhone 6 with iOS 8.1.1
Thanks.

Do you have Include Voice Memos selected under the Music tab for your iPhone sync preferences with iTunes? If so, this means the voice memos on your iPhone should have been transferred to your iTunes library on your computer. If these are available in your iTunes library, delete the voice memos from your iTunes library on your computer followed by a sync.

Does the Sennheiser MM50 work with Voice Control?

I'm not double posting -- over at "using 3Gs" I asked if anyone had any idea what other earphones I could use with voice control, but after researching these Sennheiser MM50 iP phones look like just the ticket... except I'm not sure they work with the voice control itself.
They have a mic and a pause/answer button -- has anyone tried theirs to see if it will do the same job on voice control as the Apple earbuds do? (Which, IMHO, is superb). I do hate to give up volume control, but I can live without it for better overall sound (too bad the VC doesn't allow you to just say "louder" or "softer" <g>.

Mike Kelley wrote:
I'm not double posting -- over at "using 3Gs" I asked if anyone had any idea what other earphones I could use with voice control, but after researching these Sennheiser MM50 iP phones look like just the ticket... except I'm not sure they work with the voice control itself.
They have a mic and a pause/answer button -- has anyone tried theirs to see if it will do the same job on voice control as the Apple earbuds do? (Which, IMHO, is superb). I do hate to give up volume control, but I can live without it for better overall sound (too bad the VC doesn't allow you to just say "louder" or "softer" <g>.
I would assume all earphones work that have a mic. No reason why they shouldn't

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac?

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac? (Any solutions?) (BTW. Chrome doesn't work either)

Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas?

Keyboard problem with T410 - Control Key

I have a problem with the control keys on the keyboard of T410.
I swapped my X200 keyboard over to T410 to check if it is software or hardware issues. With the X200 keyboard, the 'Ctrl' key is not working. With the T410 keyboard, 'e', 'd', 'c' and 'Ctrl' keys are not working.

Welcome to the forum!
I believe that X200 and T410 keyboards are mapped differently in BIOS.
Can you find another T410/T510 keyboard to test with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

URGENT ! JDEV 10.1.2 Problem with data control generated from session bean

I got a problem with data control generated from session bean which return a collection of data transfer object.
The dto's seem to be correct. The session bean load correctly the data into and the object's are plenty of data. Using the console to display the dto content is ok.
When generating a data control from this session bean and associate the dto included in the collection only the first object level and one-to-one dto object are correctly setted in the data control. Object that represent collection into the dto (one-to-many foreign key) are setted as collection with an iterator but the structure of the object is not setted. I don't know how to associate this second level of collection with the dto bean class to obtain the attributes definition.
I created a case with hr schema like the hrApp demo application in the tutorial with departments and employees table. I got the same problem.
Is it a bug ?
It exists a workaround to force the data control to understand the collection data structure ?
Help is welcome ! this is urgent !!!

we found the problem by assigning the child dto bean class to the node representing the iterator in the xml file corresponding to the master dto.

I have problem with voice baton

Dear sir,
i have ipad with the siral no DYTHHFLGDVGL and i have a problem with voice baton. i bay this ipad before 6 months.
please slove my problem.
shahzad badar
00966 500 606 488

You are not talking to Apple here. This is a user to user technical help forum hosted by Apple. Apple does not read these forums. We are all just users here.
If you have some sort of hardware problem you will have to contact Apple Support.

Problem with custom control and focus

I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
So i'm not able to remove the focus from an embeded TextField.
Any idea how to do this ?

Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
control:
import javafx.scene.control.Control;
import javafx.scene.control.TextField;
public class TestInput extends Control {
    private static final String DEFAULT_STYLE_CLASS = "test-input";
    private TextField           textField;
    private int                 id;
    public TestInput(final int ID) {
        super();
        id = ID;
        textField = new TextField();
        init();
    private void init() {
        getStyleClass().add(DEFAULT_STYLE_CLASS);
    public TextField getTextField() {
        return textField;
    @Override protected String getUserAgentStylesheet() {
            return getClass().getResource("testinput.css").toExternalForm();
    @Override public String toString() {
        return "TestInput" + id + ": " + super.toString();
}skin:
import com.sun.javafx.scene.control.skin.SkinBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.control.TextField;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
    private TestInput control;
    private TextField textField;
    private boolean   initialized;
    public TestInputSkin(final TestInput CONTROL) {
        super(CONTROL, new TestInputBehavior(CONTROL));
        control     = CONTROL;
        textField   = control.getTextField();
        initialized = false;
        init();
    private void init() {
        initialized = true;
        paint();
    public final void paint() {
        if (!initialized) {
            init();
        getChildren().clear();
        getChildren().addAll(textField);
    @Override public final TestInput getSkinnable() {
        return control;
    @Override public final void dispose() {
        control = null;
}behavior:
import com.sun.javafx.scene.control.behavior.BehaviorBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputBehavior extends BehaviorBase<TestInput> {
    private TestInput control;
    public TestInputBehavior(final TestInput CONTROL) {
        super(CONTROL);
        control = CONTROL;
        control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
            @Override public void handle(final KeyEvent EVENT) {
                if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
                    keyPressed(EVENT);
        control.focusedProperty().addListener(new ChangeListener<Boolean>() {
            @Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
                if (isFocused) { isFocused(); } else { lostFocus(); }
    public void isFocused() {
        System.out.println(control.toString() + " got focus");
        control.getTextField().requestFocus();
    public void lostFocus() {
        System.out.println(control.toString() + " lost focus");
    public void keyPressed(KeyEvent EVENT) {
        if (KeyCode.TAB.equals(EVENT.getCode())) {
            control.getScene().getFocusOwner().requestFocus();
}the css file:
.test-input {
    -fx-skin: "TestInputSkin";
}and finally the test app:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class Test extends Application {
    TestInput input1;
    TestInput input2;
    TestInput input3;
    TextField input4;
    TextField input5;
    TextField input6;
    Scene     scene;
    @Override public void start(final Stage STAGE) {
        setupStage(STAGE, setupScene());
    private Scene setupScene() {
        input1 = new TestInput(1);
        input2 = new TestInput(2);
        input3 = new TestInput(3);
        input4 = new TextField();
        input5 = new TextField();
        input6 = new TextField();
        GridPane pane = new GridPane();
        pane.add(input1, 1, 1);
        pane.add(input2, 1, 2);
        pane.add(input3, 1, 3);
        pane.add(input4, 2, 1);
        pane.add(input5, 2, 2);
        pane.add(input6, 2, 3);
        scene = new Scene(pane);
        return scene;
    private void setupStage(final Stage STAGE, final Scene SCENE) {
        STAGE.setTitle("Test");
        STAGE.setScene(SCENE);
        STAGE.show();
    public static void main(String[] args) {
        launch(args);
The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean...

Problems with remote control and user accounts - error 1759?

We're running:
-XP Pro SP2 clients with Zen SP1 IR3a agent, 4.91 SP2 Netware client.
-We are NOT running Middle Tier.
-Novell servers are running Netware 6.5 SP7, E-directory 8.7.3.10b or 8.8.
-Zen server is also SP1 IR3a.
We have no problem using remote control on workstation objects. We are having intermittent issues with remote controlling user objects. When the issue occurs, we receive the following error, "Error 1759: The selected user is not logged in on any workstations" even though the user is in fact logged in. After some more research, it appears that the "networkAddress" attribute of the user object is blank so we feel that this is the root cause. My question is what would cause the networkAddress attribute to randomly not update? For instance we had a user (verified his login) who we could not remote via the user object (workstation object worked). We checked his networkAddress attribute and found that it was empty. User rebooted and logged in again and his networkAddress attribute populated, and then we could remote control him via the user object. Now this isn't always the case after a reboot. There doesn't appear to be any pattern to when the networkAddress attribute does or does not update. In fact, this particular user has a laptop so he boots it up fresh every morning yet he was not showing a network address when he logged in initially today.
We've followed the troubleshooting steps in Novell Documentation without any success. Is there anything else that we might be missing, especially with respect to getting the networkAddress attribute to update? We ran a DSreport on that attribute and found about 500 out of a total of 1500 users had no networkAddress. Some of those are sure to be legitimate but that number is much too high for the number of people that should be in the office.
I've read some older threads on the subject but none of them really provide a firm solution. Also most of the older threads reference Middle Tier which we are not using.
Thanks in advance.

> 4.91 SP2 Netware client.
You could try this TID:
"A user will no longer have an entry in their "Network Address" attribute
even though they are logged into the eDirectory Tree."
http://www.novell.com/support/viewCo...1262&sliceId=1
"Resolution"
"This was fixed in the 4.91 SP3 client. NWFS.SYS was modified so that it
will check the monitor connection on a reconnect and if it is not connected
close the connection and try and get a new monitor connection to the tree.
Prior to the 4.91 SP3 client, the solution is to have the user login again
so that it issues the NDS Finish Login request again that will populate
Network Address again."
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Problem with kerio-control-vpnclient

Hi everyone
i connect to internet with kerio-control-vpnclient
the problem is some site filter by goverment like facebook and when connect with my VPN,
all site load but the facebook and youtube and so on not load
i guess the problem is my DNS
how i enter custom DNS to kerio-control-vpnclient?
Tnks all

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Problem with Database Control

Hi @all
OS Windows Server 2008 (Standard)
DB 11.1.0.7.0
I try to configure DB Control manually with
D:\ORACLE\product\11.1.0\db_1\BIN>emca -config dbcontrol db -repos create
result is
15.09.2009 13:19:14 oracle.sysman.emcp.EMConfig perform
INFO: Dieser Vorgang wird in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_1
3_15_52.log protokolliert.
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emd.properties konnte
nicht gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties.emca
konnte nicht gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.FileUtil backupFile
WARNUNG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\emd\targets.xml konnte nicht
gesichert werden
15.09.2009 13:19:15 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Database Control wird gestoppt (dies kann etwas lõnger dauern) ...
15.09.2009 13:19:15 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Das EM-Repository wird erstellt (dies kann etwas lõnger dauern)...
15.09.2009 13:24:22 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository erfolgreich erstellt
15.09.2009 13:24:23 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepositor
y
INFO: Konfigurationsdaten werden in das EM-Repository hochgeladen (dies kann etw
as lõnger dauern) ...
15.09.2009 13:25:02 oracle.sysman.emcp.EMReposConfig invoke
INFO: Konfigurationsdaten wurden erfolgreich hochgeladen
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysma
n\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\S
AXMBS\emca_2009_09_15_13_15_52.log.
Die Konfiguration konnte nicht abgeschlossen werden. Weitere Einzelheiten finden
Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_15
_52.log.
snippet of the log
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
Caused by: java.io.FileNotFoundException: D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties (Zugriff verweigert)
     at java.io.FileOutputStream.open(Native Method)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
     at oracle.sysman.emcp.util.FileUtil._copyFile(FileUtil.java:257)
     ... 11 more
15.09.2009 13:25:02 oracle.sysman.emcp.EMDBCConfig updateEmomsProps
KONFIG: Datei D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties.emca wird in D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties kopiert
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_15_52.log.
15.09.2009 13:25:02 oracle.sysman.emcp.EMConfig perform
KONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Fehler beim Aktualisieren von D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties
     at oracle.sysman.emcp.EMDBCConfig.performConfiguration(EMDBCConfig.java:405)
     at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:167)
     at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:137)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:223)
     at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
     at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
     at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
     at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
the problem is Caused by: java.io.FileNotFoundException: D:\ORACLE\product\11.1.0\db_1\sysman\config\emoms.properties (access denied)
and when i try to deconfig this following occured
15.09.2009 13:30:28 oracle.sysman.emcp.EMConfig perform
INFO: Dieser Vorgang wird in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_1
3_29_13.log protokolliert.
15.09.2009 13:30:28 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Database Control wird gestoppt (dies kann etwas lõnger dauern) ...
15.09.2009 13:30:28 oracle.sysman.emcp.EMConfig perform
SCHWERWIEGEND: Can't find file D:\ORACLE\product\11.1.0\db_1\host\sysman\config\emoms.properties
Weitere Einzelheiten finden Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\S
AXMBS\emca_2009_09_15_13_29_13.log.
Die Konfiguration konnte nicht abgeschlossen werden. Weitere Einzelheiten finden
Sie in der Log-Datei in D:\ORACLE\cfgtoollogs\emca\SAXMBS\emca_2009_09_15_13_29
_13.log.
Can't find file D:\ORACLE\product\11.1.0\db_1\host_db\sysman\config\emoms.properties
With Windows Server 2003 I haven't any problems with the configuration of database control over cmd.
Any Ideas?

Please run the following command
cmd>net start OracleDBConsolexxx(Assume sid name=xxx
cmd>set oracle_sid=xxx
cmd>emca (You will get all related keyword of emca)
Firstly you have to check that if you have created your database through DBCA then you have to drop old repository or recreate repository:
To drop (remove) the configuration files and repository for Database Console, run:
cmd>emca -deconfig dbcontrol db -repos drop
To recreate (remove & create) the configuration files and repository for Database Console, run:
cmd>emca -config dbcontrol db -repos recreate
(Please mark it helpful/Answered if you get solution)
Regards,
Suman

Problem with Table control & i/o field

hi experts,
i have a problem with both table control and i/o field.
2 i/o fields and 1 table control.
i/o field are common for table control data.
when i am inserting ata from here to database table, table control data are inserted successfully, but from i/o field data are not inserted.
kind regards,
debendra

Hi
You must create data objects in your ABAP code having same name as your screen i/o fields. Now these objects will contain the data entered in your screen. Use these objects to insert data in your db table.
Hope this helps
Regards,
Jayanthi.K

Problem with database control returning multiple rows as Array using Oracle

Has anybody using Oracle gotten a Database control that
returns multiple rows to work returning an array?
The only way I can seem to return multiple rows is by returning
a RowSet. Returning an array gives me a NullPointerException
(when called within a pageFlow). When calling a database control
that returns an array from a web service I get a
"java.sql.SQLException: ResultSet has no more data." error.
The samples using the pointbase database seem to work, but when I
converted the CustomerDBClient web service to use Oracle, it starts
failing on calling the database control that returns an array
with: "java.sql.SQLException: ResultSet has no more data."
Has anybody gotten this to work using Oracle?
I'm also having some problem returning an Iterator. It seems
to work when called from a web service, but returns nothing
if called from a page flow.
I'm using Oracle 8.1.7 and WebLogic 8.1.
Eric

Do you need a particular service pack installed to return an array of custom object?
I am getting a ResultSet contained no data error when trying.
Thanks,
-Thomas
"Robin Karlin" <[email protected]> wrote:
>
Eddie O'Neil <[email protected]> wrote:
All--
Unfortunately, returning an Iterator to a JPF (or JSP) from a
database control is broken in WLW 8.1, though it will work inside of
a
JWS or JCS.
There shouldn't be a problem with returning an array of objects out
of Oracle to the JPF, and if you need an Iterator specifically, youcan
wrap the array in an Iterator implementation.
Sorry for the inconvenience.
Eddie
Lenny wrote:
I have gotten it to work on Oracle using Array:)
However, I haven't gotten it to work on Oracle using Iterator:( Itis so
simple, but doesn't work:(
"Eric Dokken" <[email protected]> wrote in message
news:[email protected]...
Has anybody using Oracle gotten a Database control that
returns multiple rows to work returning an array?
The only way I can seem to return multiple rows is by returning
a RowSet. Returning an array gives me a NullPointerException
(when called within a pageFlow). When calling a database control
that returns an array from a web service I get a
"java.sql.SQLException: ResultSet has no more data." error.
The samples using the pointbase database seem to work, but when I
converted the CustomerDBClient web service to use Oracle, it starts
failing on calling the database control that returns an array
with: "java.sql.SQLException: ResultSet has no more data."
Has anybody gotten this to work using Oracle?
I'm also having some problem returning an Iterator. It seems
to work when called from a web service, but returns nothing
if called from a page flow.
I'm using Oracle 8.1.7 and WebLogic 8.1.
Eric
I get the same error that Eric reported when trying to return an Array
of objects.
It is really frustrating because I can't use much of the built-in control
logic
that WLW provides. All I did was create a data pool for Oracle and a
datasource.
I modified the sample app in C:\bea81\weblogic81\samples\workshop\SamplesApp\WebApp\callJavaControl
to point to that datasource and I get the error that Eric reports above.
Can
anyone help me out????
Thanks,
Robin

Problem with voice control

Similar Messages

Maybe you are looking for