Problem with voice mail notification after 8107.79...
i have a nokie lumia 800 and there was an update of the OS to 8107.79 from une, when i updated my phone, there were problems i have encountered, first was the voice mail notification. I did not subscribe myself to my network providers voice mail service (since they dont have that service as well) but there was a notification on my phone about a voice mail to which i wonder how did i get a notification when i dont even have a voice mail account.
Second was the lights at the three buttons below the screen, it does not illuminate on most of the time.
Has anyone encountered these problems?
Not sure about the voicemail thing but 8107 shouldn't affecting the buttons at the bottom of the phone that issue arose afte 1500 firmware update from Nokia.
If you have your display set to auto then the the buttons will light up normally.
Similar Messages
-
Intermittent problem with voice mail
Siince I had a new system installed two years ago on my phone, I have intermittent problems with the phone which tech support does not want to resolve. They says that unless they see it, it is not their problem. Nice attitude.
I call voice mail, and it doesn't recognize my pin. I try it again, doesn't recognize the pin. Then I enter my phone number. Doesn't recognize the phone number, tells me that I don't have a voice mail on my phone. I hang up, and call again. This time I do get through with the phone number. I hear my message. Now I can't erase the message. I have to call back to hopefully get through to the message.
It is ridiculous. I am ready to cut all phone service to my house if I don't get this fixed.Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board. you will find a link to the private board where you and the agent may exchange information.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution. -
I have a voicemail system at my company and any voicemail box that you call gives you a time that is 8 hours off of the correct time. I have gone into the unity configuration page and checked the time zone and everything and it shows the correct time there. I can't figure out why when I call the voice mail I get the wrong time, any ideas?
Make sure that the system time and timezone on your server are correct. Make sure that the timezone for the subscriber(s) is correct. If you're using Unity with an offbox mailstore, check the time and timezone on the mailstore server.
Brandon -
Problems with certain mail attachments after moving them to a different folder in Mail
I am using Mac Mail as my default email client, and every once in a while when I move a message with an attachment from one folder to another (for example from my Inbox to my Personal folder) in Mail, the attachment will no longer show up, but rather an infinite set of characters.
I know it's a problem with my local Mac Mail client, since:
I can see the attachments perfectly in my webmail
I can see the attachments perfectly in my other Mac's Mail client, as well as on my iPhone and iPad.
This is a sample of what it looks like:
--Apple-Mail-6-682963542
Content-Disposition: inline;
filename="Opcion 1.png"
Content-Type: image/png;
x-mac-hide-extension=yes;
x-unix-mode=0777;
name="Opcion 1.png"
Content-Transfer-Encoding: base64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 ideas?Get info on the drive. What format? FAT drives may be behave erratically for heavy-duty use of the kind you are doing. It's okay to leave a flash drive FAT formatted for light use but for heavy-duty file transfer I think you can encounter issues.
iTunes does not look at files directly. It maintains a database (library.itl) of the files in its collection. When you play a track it looks up where that file is located and goes and plays the file in that location. If you manually move a file or folder used by iTunes that database is no longer correct and you get broken links ( ! ). If you want to move files or folders with iTunes you have to let iTunes do it. Since iTunes is organizing your library there isn't much flexibility in what you can do other than move the whole collection to a different folder by changing the media location preference in preferences.
Lion - Disk Utility - https://discussions.apple.com/message/16925522 - repairing your drive using Disk Utility on Lion's recovery partition. -
After changing passwords for iCloud, Mail is stuck in a do-loop "There is a [problem..." The error appears in less than one second after responding "Later"
Nope. Turns out that even though I have two Macs running 10.9.4, the one in question doesn't get the SMTP settings changed by iCloud settings when the password is changed, so I had to "Edit" the account in Mail, plow down to the password settings for the Apple SMTP server, and change the password myself. Nothing in the System Preferences iCloud setting tab lets you change any settings on the local machine. Apple is sure they are controlling everything when you make changes in iCloud, but they are wrong. Identical versions of 10.9.4 are configured differently on two different Macs.
-
I Have No Voice Mail Notifications In Z10 Hub
I have seen issues with Voice Mail Notifications in various threads, but I didn't see one having No Voice Mail Notifications In the Z10 Hub at all. Sorry if I missed a thread that applies.
From what I was told by Blackberry Technical Support, at the bottom of the BB Hub next to "Calls", "Emergency Alerts" and "PIN", should be "Voice Mail" (or something similar). I have none and therefore do not get any notifications when I receive a Voice Message. I thought this was odd, and figured I had some settings incorrect, but that is not the case. It's just not there.
I am in the USA on Verizon's network with the latest updated OS 10.1.0.2039 that they offered on a STL100-4, Z10.
Anyone else have this issue?My wife had the same issue on her Z10.
A quick call to customer service at AT&T and they set it up.
Rebooted her phone, and all was well.
I'm sure Verizon customer service can do this for you as well.
Hope this helps.
Sincerely - -
I've a problem with my mail app
I have a problem with my mail app, after upgrading mavericks.
My mail app was worked well, before I upgrade.
Now, my mail app is working only with icloud account.
I can use my gmail account with safari or other web browsers, but not in the mail app.
That was happening both of my macbook pro, and macbook air, but not on my iPad and iPhone.
I tried deleting account and re added it, but that doesn't solve the problem.
what should i do..??Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.
iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?
Contact your carrier - voicemail, and visual voicemail, is a carrier feature.
-
has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?
Have you tried calling Apple tech support?
http://www.apple.com/contact/ -
Hello . I don't know what to do anymore. I am having problem with push and notification. I have to go into the apple mail app to see my email. This is crazy. Is anyone out there with the same issues?
If it's happening on all apps that you've downloaded, but not on the Apple built-in apps, then try downloading any free app as that appears to reset something - you can then re-try your apps, and you can delete the free app.
If it's only happening on one or two apps then try closing them completely : from the home screen (i.e. not with any of the affected apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the apps to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"
Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is. -
Problems with icloud mail constantly auto-saving
Problems with icloud mail constantly auto-saving - screen freezes. VERY frustrating. running windows 8. same problem through safari, explorer and chrome. Any suggestions to reduce auto save frequency?
Hi Csound1
approx every 30 seconds the browser freezes and 'saving' appears in the top bar of icloud mail. The cursor starts spinning and then after about 8 secs I can start typing again. I also fiund that about 5-6 times a day my icloud browser tab showing mail just close and return to the main icloud menu page showing icons for mail, calender, notes etc -
SMTP problems with Apple Mail 6.2
Recently my Apple Mail 6.2 has become messed up. It tells me that all my accounts (a gmail, me.com & cloud) are all offline and can not be brought back on line. The Mail on my iPhone and iPad works fine with the exact same settings and exact same accouts that I have had for many months. Something has changed in Mac OS 8 Mountain Lion in release 6.2, IS THIS FIXED?
This is how to solve the problem:
- Open Mail.
- at top left, click Mail, then Preferences.
- Choose the Accounts tab.
- highlight your first mail account on left.
- towards the bottom right, click the arrows on the right side of
'Outgoing Mail Server (SMTP)' and choose the
' 'Edit SMTP Server List'
- When the next box opens, click the 'Advanced' tab in the middle right
of that box.
- choose 'Use custom port:' (2nd choice in middle) and put the
value 25 in the box on right (i.e. you are forcing Port 25,
which is the standard port)
- you should be able to 'OK' out of all the boxes, and the SMTP server
should no longer say Offline.
In 2 out of about 20 Mac's I had to go back in and choose
Use Secure Sockets Layer (SSL) click OK,
then immediately go back and Uncheck the Use SSL box, and click OK again.
In both of those cases I also had to reboot / Restart.
It was probably the 'restart' that got the settings to take hold,
but since I tried checking SSL both times to force the change, I listed it here.
If I had to try with another system, I would skip the SSL step and just reboot.
Port 25 is listed as one of the default ports in choice 1 on the last page;
but it seems like the latest release of Mail for both Lion and Mountain Lion
never really checks port 25.
Like I said, I had to do this with EVERY Mail account after Mail updated to 6.3
in both Lion and Mountain Lion upgrades,
. . . and it worked for all of them. Feel free to ask questions, I'll check back.
Kerry
Message was edited by: homeBased -
I have many problems with my mail since I moved to mavericks. The filter is very sensitive, read mail appears as unread, I can't drag mail to the folders and more. I can't update the mail program as directed on this page, update says my system is updated
I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck! -
Is anyone having problems with apple mail since upgrading to Yosemite?
MacBook Pro 15", mid 2012 running Yosemite 10.10.1 - ever since upgrading to Yosemite, I have a problem with Apple Mail which is that the from address persists on my screen after I close the email. I have to quit mail and sometimes even restart to get rid of it. Has anyone else experienced this? Any ideas?
No, I mean it lingers when I close the email. What I've discovered since I posted earlier is that if I reopen the email and hover over the address in the actual email the one that is persisting goes away. Thank goodness, because it is very annoying. I am wondering if it is somehow intentional in the SW. Thank you for asking.
Maybe you are looking for
-
ICloud not syncing on one computer
I have two iMacs, a Macbook Air and and iPhone 4. All four were syncing my Calendars and Contacts properly with Moble Me. After transistioning to iCloud, one of my iMacs no longer syncs calendar events properly. It receives updates from the other dev
-
Secondary email accounts on my iCloud account
I have a secondary icloud.com email account associated with my icloud account. How can I add the secondary account to my iphone and ipad? My primary email address is not an icloud.com address.
-
I have a weird problem that adding a serverListerner component on jspx page causes compilation error: The class of the deferred-methods return type "{0}" can not be found. No property editor found for the bean "javax.el.MethodExpression" If I remove
-
My iphone 4 of ios 7.1.1 sim card has not working from since yesterday, it always shows searching whenever i insert sim in it, i do it again and again, but it cant be fix. What can i do? Please help me.
-
Inbound invoice without PO number
Hi, When we use BAPI_ACC_INVOICE_RECEIPT_POST for posting an invoice without a PO, we are facing major issues. We have to input vendor account number and the amount. This should be entered in 'ACCOUNTPAYABLE'. Even though there is the field 'VENDOR_N