Problem with Wait Activity in OBPM 10GR3

Hi all,
I have a set of automatic activities and then an exception path which when entered has a Wait Activity which waits for the process for a few minutes before resuming and going back to the automatic activity where the exception occured.
Now, I have changed the Number of Concurrent Executions for all my automatic activities to 20 in Advanced Properties of Automatic Activities.
Now , there is no such option to change the Number of Concurrent Executions for Wait Activities in Advanced Properties of Wait Activities.
So now, all instances keep on waiting in the Wait Activity inspite of the wait time being surpassed and do not move forward.
Why is that so?
Any idea?
Do I need to change back to Unlimited Concurrent Executions especially for all activities in the exception flow?

Well here is the problem..
I have a Wait Activity with a Wait Interval of 5 mins.
It was working fine before. It used to wait for 5 mins and then continue with the rest of the process. At that time I had not changed the Number of Concurrent Executions in the Advanced Properties of all Automatic Activities. The Number of Concurrent Executions were Unlimited.
Right Click on Any Automatic Activity---> Select Properties --> Select Advanced and you should see that option i.e. Number of Concurrent Executions .
Now I have made it Limited and given a number of 20 Concurrent Executions instead of Unlimited.
Somehow now I find that the Wait Activity waits for more than 5 mins. Sometimes even 20 to 30 mins. Not sure why?
Any idea?
Is it because I changed the Number of Concurrent Executions for Automatic Activities from Unlimited to 20? Or is there any other reason? And how to fix this problem?

Similar Messages

Problem with ODS activation -- Urgent

Hi All,
I have a problem with ODS activations, when I trying to activate ODS data automatically/ Manually. It is going to short dump.
Could you anybody pls help me in this issue.
Thanks in Advance
Narendra

Sorry for delay,
I raised an OSS messsage and waiting from reply.
The ODS fetch the data from 6 sources. all the 5 sources data is correctly updating in the ODS. I have ODS activation problem with only one soure data.
The error is
RSMO
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
Activation of data records from ODS object ZPMPRCST terminated
SM37 Job log
Error Message from Job log (SM37) (Highlights of the Job log)
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Activation is running: Data target ZPMPRCST, from 1.397.204 to 1.397.204
Data to be activated successfully checked against archiving objects
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Activation is running: Data target ZPMPRCST, from 1.397.204 to 1.397.204
Data to be activated successfully checked against archiving objects
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
RSODSACTREQ Table Entries
Table:          RSODSACTREQ
Displayed Fields: 10 of 10 Fixed Columns:                3 List Width 1000
InfoCube       Request ID                     Data packet number             Boolean    Boolean   Request ID                                                 ODS operation    Activ. status
ZPMPRCST     REQU_49Y4VOQEDO6H73KDE354JNDB5 000000             X       X             ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9     A                         0
ZPMPRCST     REQU_49Y4VOQEDO6H73KDE354JNDB5 000001             X                       ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9     A                        4
ZPMPRCST     REQU_49Y4VOQEDO6H73KDE354JNDB5 000002             X                       ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9     A                         4
ZPMPRCST     REQU_49Y4VOQEDO6H73KDE354JNDB5 000003             X                       ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9     A                         4

Problem with the active version of the transfer rule ABAP program with sour

Hi,
I have a problem with the active version of the transfer rule ABAP program with source system EXCEL.
The system does not react to changes done in the transfer rule coding. For FISCPER I have hardcoded the result 'BABABA' and still the results delivered are those from the CSV.
Resetting the system buffers does not help. The problem is systematic in combination with source system EXCEL (i.e. not only 1 InfoSource). Checking the active program Extras->Display Program shows the coding (result='BABABA') being there, but
as stated, the system does not produce the result BABABA, but instead the result of the CSV.
It seems as if the original version from the very first activation of the transfer rule program remains somewhere and continues to be used. Does anybody know how to flush it out and get the system to actually use the coding appearing as the active program.
I have posted an OSS note, but SAP takes it time to answer and I am under time pressure so I figured that maybe one of you know who to solve it before SAP does.
Greetings and thanks,
Martin

Hi martin,
just try to go out the RSA1 and then return to your infopac. ...
sometimes there some "cache" trouble

REAL problems with iMessage activation same with Face Time

I'm having real problems with IMessage activation same with FaceTime, the phone shows the activation is being made but it does not activate!
Apple ID and password is OK, it's working with other applications
Any ideas guys?!

My daughters had the same problem with both of their iPod Touches. One logged back into iMessage and FaceTime, the other consistently would not login with the same error, "An error occurred during activation. Try again."
Check your date and time. Its likely incorrect. Once the date is corrected. Restart the device.
For what ever reason, some devices lose track of the date. In my case, apparently, my daughters change the date to affect a particular game by advancing the date. Little cheaters. (LOL)
Hope this helps!

I have a problem with software activation of dedicated channel partners.

I have a problem with software activation of dedicated channel partners.
I find in the portal software and serial number for activation, but when I enter the serial (after you log in with the adobe id) tells me that the serial number is not correct.
Tednto contact Customer Support directly (via chat) but nothing ever done offline.
my adobe id is: [email protected]

Error "The serial number is not valid for this product" | Creative Suite
or contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html
i know you've tried adobe support, but if they can't help you no one here can help you unless there's some problem support can but won't handle.

I have a iPhone 4S 16 gb and I am having problem with sim activation please tell me what to do

I have a iPhone 4S and I am having problem with its.activation plz tell me. The solution of this problem?

Did you already try these steps?
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
copied from iOS: Troubleshooting activation issues

Many problems with software activation with software purchased online

All:
In the last few weeks, I have had a lot of problems with software activation.
I purchased 10 copies of Office. 5 would not activate. I took the software back to the local as suggested by customer service, but was denied an exchange.
I purchased 7 copies of Adobe Photoshop elements. 3 activated, the rest did not.
What is going on? Can I get these replaced, refunded, or activated?
Thanks.

Greetings captainkeys,
That’s quite the amount of software to purchase! I’m sure you were quite disappointed to find that not all of the software codes seemed to be activated, delaying your use of the software. I’m glad you’ve reached out to us in multiple ways to see what options are available to you, and I apologize if we have been unable to find a resolution for you.
Using the email address you registered with the forum, I was only able to locate eight copies of Microsoft Office, and couldn’t locate any copies of the Adobe Photoshop Elements. That being said, I was able to see that some of the codes did fail to process through the activation process. I would be happy to look into getting these activated for you.
That being said, I am sending you a private message to gather further information from you. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

I have a problem with it activation.

Hello!
I bought iPhone 4S it was purchased in France but i live in Ukraine and want to use it in my country. the phone is neverlocked.
I have a problem with it activation.
Part No. MD242F/A
Serial No. C39GGL26DTD7
The phone has latest firmware 5.0.1
In my laptop installet latest iTunes 10.5.1.42
The phone can accept my ukrainian sim-card and I can see my carrier network but activation is not possible. I get an error message about my sim card is not supported and I must insert the card carrier to support it. But I do not know for what carrier card I need, because the phone is neverlocked. And I have no cards of French carriers.
can you advice me with the problem please how to solve it?

No one can or will help you
This is
Find My iPhone Activation Lock - Apple Support
It is a very successful anti theft device
The only way to activate the iPhone is for the Owner whose Apple id is still on the iPhone to release it ,an easy task if you can find them
There is no other way Activation lock cannot be broken and Apple will not assist you

Problems with db query in activity in OBPM 10GR3

I wrote the following query in the activity itself
INSERT INTO TEMP_TABLE(NAME)
VALUES (testName);
It worked fine in DEV environment.
But when I deployed the project to QA and connected to the db in QA, it gave me an error:-
---A SQL Exception has occured in Cause f SQL Excepion: java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-00942: table or view does not exist SQLState: 42S02 SQLErrorCode: 942 Message: [BEA][Oracle JDBC Driver][Oracle]ORA-00942: table or view does not exist
Why is that?
I understand that if I use DynamicSQL.executeQuery(sentence : sqlQuery, implname : implname);
it will work even if I change to connect from DEV To QA
But if we use the query directly in the activity itself , it does not work in QA.
Why is that?
how do I fix that to work in all environments?

Hi Dan,
I did not understand you.
I do the following:-
1) Create an external resource with a generic name say TEMP_DB and give all the Oracle db credentials, username, password, SID, schema and port. This is connected.
2) Then I Catalogue this in my Catalog using Catalogue Components-->SQL.
3) I select the "Use an existing configuration" option and select my newly created external resource which I named as "TEMP_DB"
4) When I hit next, it fetches me the db information
5) In that I select the db schema name and introspect the tables in it.
6) These tables are then entered into my catalog
7) Finally I use a direct BPM query instead of using Fuego.Sql.DynamicSQL.executeQuery() in my activity itself.
So the problem is that, even if I change the External Resources config giving it a generic name, I have selected the same DEV schema name. The schema is directly introspected which I directly use in my query in my activity
as oppsed to using DynamicSQL.executeQuery() where I don't specify the schema name . I just specify the External generic resource name which is TEMP_DB.
But I don't want to use DyanamicSQL.executeQuery(). So how do I resolve this problem with using it?

Problem with SSL Activated on SSO Login

Hi Guys,
One of my applications has recently hit a few problems when SSL was activated on several environments. My application requires you to login using a SSO username and password before you can use the application. Before SSL was implemented, when you pressed the main menu button the page would redirect to the login server and the SSO login would remember your details and log you in again and then take you to the 1st page with a new session id. However, with SSL implemented, when the main menu button is pressed it redirects you to the login server but this time it asks you to enter your username and password. This is a problem as every time authentication is required on my application, it will keep telling you to login even if you have already done so before.
For extra information, the main menu button (which is a navigation bar entry) redirects you to a piece of javascript which is used to take you back to the 1st page depending on what page you are on.
I am also using the latest version of APEX.
Any help is much appreciated as I am not sure where to go with this problem.
Also is it a problem with the SSL setup or my application?
Thanks
-Mark

I have tried to pass the cookie through the URL to the login server but this does nothing.I can't imagine what you mean by that or what exactly you did.
it just takes me to the login page and resets the session id after i have logged in again!What do you mean by "reset"?
How can I make cookies be accepted by SSL?Have you constructed an experiment to prove that this is the problem?
Is there something i can put in the application itself?Definitely not.
Scott

Problem with BI activation in Solution Manager

Hello SAP experts.
I have problem with BI Content Activation in Solution Manager solman_workcenter - test management - settings - Bi reporting
The customizing in client 010 is ok. I have BW client 001. RFC connections
are ok. After activation of BW content in workcenter only new job in sm37
has been planned but the button Status Report has not appeared. I installed
newest add-on SAPK-70405INBICONT.
Detailed description:
After customizing in:
SPRO-Basic Data-BW Setup
and
SPRO-Scenario-Specific Settings - Test Management - BW-based Reporting.
The Activation of BW content in transaction solman_workcenter - Test
Management - Settings - BI Reporting Settings the message appears:
"Test Workbench Reporting - BI Content not active", after pressing save:"Settings of Test Workbench Reporting saved"
and
"Activation of BI Content for Test Workbench Reporting started".
In test evaluation the button Status report doesnt show. After repeated
activation appears the same message as in beginning: Test Workbench
Reporting - BI Content not active.
Thank you

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

Extracting Open Items : Problem with mass activity FPBW

Hi everybody,
I need to extract Open Items in BW. I use the extractor 0FC_OP_01 which extract the content of table DFKKOPBW in OLTP. Open Items are written in table DFKKOPBW by the mass activity FPBW.
I have a problem with this mass activity : the field "Business partner number" stay empty in table DFKKOPBW after the execution of FPBW, whereas it's not empty in table DFKKOP... (and for the cleared items it works...)
Does anybody have a solution for my problem?
Best regards
Aube

hi buddy,
go to SBIW go to the setting for application specificdatasourse in that go to contact account recivable, click the fileds for extrction add the field the data to see in to dffkopbw table after mass activity
regards
nag

View for active Incidents related to WI (Problem) with status (Active) works but can't be changed.

Hi,
I wanted to create a view of Incidents which are linked to a Problem (any problem).
I did a quick test using the Incident (advanced) class, selected to display Incidents with status Active and [Work Item] Is Related To Work Item and status for Problem with the status Active.
At this first test I didn't bother to select any specific columns to display but just went with the pre-selected ( Description, Display Name, Display Name) and it worked.
I got a list of expected Incidents in the view but having the Description column made it quite useless.
So, when I try to select the columns I find useful it will not update and it returns a No items found message instead.
(image removed due to limitations)
It is of course possible to group by one of the Display Name fields and collapse to get a more workable view but it still lacks a lot of good information. One would like to include ID, title, Created date,
date modified, Display Name for Affected User and Assigned to user, and a few others.
I was just a bit stumped as to why this fails when changing the columns on a view that obviously is possible to create.
Thanks in advance,
Daniel

Consider using the Advanced View Editor( or
the free edition), since it has much more robust criteria and column editing capabilities.

Problem with Business Rules in OBPM 10.3.1 Enterprise for WebLogic

We're having a problem with our Business Rules. We've updated two of our business rules (that are used by business rule transitions) in Studio; however, when we publish the updated process, the business rules are not updated. We cannot find anywhere in the Process Admin where to administer the rules to make sure they're overwritten.
I've double checked, and the updated rule code is in the .project.xpdl, but for whatever reason, the rules are not being updated during the deployment. I'm sure that we've done this many times in the past, but for some reason, now it is not working.
We're tried variations of the different versioning when we publish, and we've also tried to unpublish all of the older versions of our process, but it does not change the business rules. We can try to unpublish and undeploy, but it seems like we would lose all old instances of that process that are still running if we did that.
Has anyone ever had this issue, or know if there is a way to effect the business rules via the process admin?

I see what you're saying, but here's why it works the way you're observing it.
Once deployed, the 10g business rules are edited by a business user (the owner of the rule). Changes in Studio that a developer makes to a business rule don't override the changes that the business user made.
To let the business owner edit the rule, add a Global Interactive activity and change its property setting to edit the business rule. Put this activity in the role for the business owner (the person you want to edit the rule).
Dan

Problem with CS4 activation using student users

Hi,
I am working at a school and over the last few weeks we have rebuilt our network from a 2003/xp to 2008R2/Win7 network so have had to remake a lot of software packages. We have created and deployed CS4 with success across the network but seem to have an activation problem with a specific user type.
This user type is with student accounts which use a seperate group policy to the staff accounts. When students log in and the PC has not had any CS4 programs started before, it comes up with the activation window prompting to start a trial (does not work) or activate with a serial number (also does not work), which should not happen as the serial is built into the deployment. When staff log in and run the software it works fine and activates with no problem. So this is not an activation issue, more of a technical issue.
This is causing a problem as for us to activate all of the CS4 software we have to log onto each pc as a staff member, open Photoshop (or another CS4 program), close it then log in as the student for it to work. (This is only needed once per PC, but is time consuming with over 400 computers.)
The only main difference between the staff and student accounts are that students use mandatory profiles (with roaming appdata) and staff use fully roaming profiles. There are other policies in place for students but none that I can see would stop the activation process from working.
So my question is, does anyone know what could be stopping this activation from working?
Thanks,
Joe

Still having the problem, anyone have any ideas what could be causing it? Im at a loss here, ive compared both policies for staff and students but can not work out whats causing the issue.

Problem with Wait Activity in OBPM 10GR3

Similar Messages

Maybe you are looking for