Problem with wait for event

Hi everyone,
I'm using wait for event step in my workflow of a custom event called zevent2.
I'm not using the event as a start event of the workflow.The event is getting triggered at a certain point of the workflow programmatically.
So for that what should be the entry in SWE2? I've maintained the following entry for zevent2 at swe2 tcode.
Object type: BUS2000126
Event: ZEVENT2
Receiver type:
Receiver function module: SWW_WI_CREATE_VIA_EVENT_IBF
In swel I'm finding out that event got triggerd but it is giving error "No Receiver Entered".
And the workflow is getting stuck at 'wait for step event'.
So can anybody please tell me what is the step am I missing? is the swe2 correct?
Thanks & Regards,
Anirban

HI....
you have to specify RECIEVER TYPE without which you will be getting this error
goto SWE2 and give the value and your problem will be done
regards
Edited by: Mohit Kumar on Feb 20, 2009 10:50 AM

Similar Messages

Query on Using fork with wait for event

Hi All,
I have a scenario in which a fork has two branches and one branch has the multiple steps along the line and also calls a subworkflow in one of the steps.
The second branch has a single wait for event to complete the workflow in case of a cancel event.
My understanding is that when the branch one executes and is on a single step decision or have gone inside a subworkflow and wating for user decision on the workitem created
Whenever the wait event is triggered on the main workflow the second branch gets executed completing the workflow and all the branch one steps and the subworkflow gets logically deleted removing all the workitem from the inbox.
Do I have to do any specific process control in main workflow to make sure that the subworkflow is deleted .
Please clarify on this.
Thanks,
Charan.

It should be taken care by itself. No additional steps required.
Regards, IA

Need help on Wait for Event.

Hello all.
I faced an issue with wait for event step,Which goes like this.
For a workflow one of the fork branches there is a wait for event step(wait for manual release) . On development server when ever that event is fired (manual release) , the wait for event is capturing and completing the workflow ( This is the correct process).(PO release procedure)
On production system, this event is not been caught(after manual release is done) and and the workflow is not complete and still in progress. (even po is released manually) Which should not happen.
So what all the things i need to verify in the production to fix this. I cannot simulate any kind of event on production ryt. so please suggest.
please suggest.
Cheers
PRASAD.

Hi Prasad
i doubt that in Production the event trace would be on. Check SWELS to see if you see the "OFF" button (this means the trace is on). If it is On, check SWEL to see if any event is there for rejection. You will have to ask example of the PO and search using the Key (PO number).
Also, check the workflow instance which is supposed to complete when the rejection happens (which did not complete). Check the technical WF log. Look for the Business Object container element which should hold the runtime instance. Check if it has a value and the same is bound from the event to the workflow in the wait for event step's binding. (_EVT_OBJECT to Workflow Container element of same type). This WF container element should have an instance and should not be empty for the wait step to work.
Regards,
Modak

Workflow WAIT FOR EVENT STEP deadline not working

Hi,
Need some inputs for the experienced people;
I have a wait for event step in a workflow with deadline monitoring (Latest End) but it doesn't seem to work.
Ofcourse, all the required setting are in place and deadline works fine for other Activity steps.
The problem is specific to Wait for event step.
The alternative is having a fork but I just want to know why the wait step with deadline doesn't work.
Thanks,
Roopesh

Hello Ajay,
Can you share with us what did you do to solve your problem?
I'm facing the same thing in my project now, I'm wandering if you could help me with this one.
I have this wait for an event step wich is configured to wait 4 minutes since the work item creation. I've also selected 'Modeled' on the Action field, and a display text for the outcome.
But in one of my tests, the event hasn't occurred and the workflow stuck in this task forever.
Thanks in advance.
Regards.
Actually, I think I got this handled. This thread was really helpful to me: http://scn.sap.com/thread/47482
Message was edited by: Leandro Farias dos Santos Abreu

Wait for event step..

hi all,
I have a wait for event step in my owrkflow and it is working fine. My problem us i am not able to trigger this event using program can anyone please let me know what i am doing wrong. following is the code i am using to trigger the event
DATA: key TYPE SWEINSTCOU-OBJKEY,
        object TYPE SWETYPECOU-OBJTYPE,
        event TYPE SWETYPECOU-EVENT.
DATA: event_id LIKE swr_struct-event_id,
        return_code LIKE sy-subrc,
        input_container TYPE swr_cont OCCURS 0 WITH HEADER LINE,
        message_lines TYPE swr_messag OCCURS 0 WITH HEADER LINE,
        message_struct TYPE swr_mstruc OCCURS 0 WITH HEADER LINE.
* CONCATENATE pernr reinr INTO key.
key = reinr.
object = 'BUS2089'.
IF action = 'APPROVED'.
    event = 'APPROVED'.
ELSEIF action = 'REJECTED'.
    event = 'CANCELLED'.
ENDIF.
* swc_create_object object 'BUS2089' key.
CALL FUNCTION 'SAP_WAPI_CREATE_EVENT'
    EXPORTING
      object_type             = 'BUS2089'
      object_key              = key
      event                   = event
     commit_work             = 'X'
     event_language          = sy-langu
     language                = sy-langu
     user                    = sy-uname
*    IFS_XML_CONTAINER       =
   IMPORTING
     return_code             = return_code
     event_id                = event_id
   TABLES
     input_container         = input_container
     message_lines           = message_lines
     message_struct          = message_struct
commit WORK.
however if i execute the FM SAP_WAPI_CREATE_EVENT by passing the values it works fine.
Thanks
Saurabh

Hi
however if i execute the
FM SAP_WAPI_CREATE_EVENT by passing
the values it works fine.
It will trigger only when you execute the above function module or
SWE_EVENT_CREATE because
You have a BO and an event associated with it now when you want to trigger this this event through program then you have to make a kind of mapping between BO and your program so thta's what this Fm does, when ever you execute the program as you are passing all the values to the Function the Evnt associated with the BO is triggered.
In order to trigger use SWE_EVENT_CREATE aand after calling this fucntion use COMMIT WORK statement
Could you let me know what condidtion did you write for the WAIT step to continue.
Regards
Pavan

Wait for event step without callback

Hi All,
In 4.6C I have the following problem:
We have a workflow that has a fork with 2 branches, with 1 necessary for continuing the fork.
One of the branches has a dynamic parallel processing step on a multiline container element, where each parallel process is a wait for event step. For example if the multiline element has 5 records, than there will be 5 parallel wait for event steps on this branch, and if all 5 are completed, then the workflow continues after the fork and the other branch should be logically deleted (normal behaviour).
The other branch has a single wait for event step, if this event is received, the other branch's parallel wait for event steps should be deleted to continue.
The problem is that when the event for the latter single wait step is received, the step gets completed, but sometimes the parallel wait for event steps on the other branch are not deleted and the wokflow does not continue. The completed wait for event step shows that the callback is not completed yet.
I tried to fix these steps in SWPC, but in 4.6C it does not work for wait for event steps w/o callback. There's an OSS note for higher releases where this is fixed to enable SWPC for wait for events, so I copied it to a custom program and use that right now.
First question is why does the system not continue these workflow's when the event is received? My guess is that the tRFC calls get stuck and when the tRFC job reprocesses the entries, it does not do it correctly. For example lately we had a tablespace problem that caused some tRFC calls to go into error. The waiting steps in the instances were completed w/o callback. I reprocessed the tRFC entries, which created new entries in the Workflow logs showing that the events are received, but the workflows still hang.
Second question, it takes a lot of time to logically delete those parallel wait for event steps. When the event for the single wait for event is received and the workflow continues w/o problem, it may take tens of minutes from the receipt of the event until the parallel wait for event steps get deleted and the WF continues. Why does it take so long?
Thanks,
KK

Hi,
Regarding the delay and the hundreds of thousand SWW_CONT updates... the main workflow on one branch does a dynamic parallel processing of a subworkflow using a multiline container element that can have 50 or even 100 elements. So we can have 50 or even 100 subworkflows waiting for their event to be triggered.
The main workflow container contains many elements, some multiline with long structures, so in one instance the main flow had 8000 entries in SWW_CONT (each field of a structure is a separate record in SWW_CONT).
Now if I do the math, when this workflow loads all the container elements of the main flow into the 100 waiting subflows before deleting them and continuing along the other branch, it creates 100 times 8000 entries in SWW_CONT, that is 800.000 inserts!
And this was ONE single workflow.. Imagine when we have just a few hundred and they all want to continue at the same time...
Anyway, the beauty comes now....
I created a simple main flow with a single multiline import parameter USERS of object USER. It has a fork with 2 branches, 1 enough to continue. One branch is a user decision with 1 option: Continue. The other branch has a subworkflow and it does dynamic parallel processing with the multiline element USERS.
The subworkflow has one single import element USER of object USER. It has only one step, a wait for event, waiting for the DELETED event of the USER object.
That's the scenario.
When I start the main flow, filling the USERS parameter with two user objects, on the first branch it starts the two parallel waiting subflows with one user each, and I get the decision step on the other branch. If I check the subflow containers this time, they only have one USER object each.
Now if I complete the user decision, the workflow continues, logically deletes the subflows and completes. If I check the subflow containers after this, they all include the USERS multile container element with all the USERS I started the main flow with!
So this time it was a different main flow, different subflow, different events. I guess there can't be any custom code doing this, unless there's some generic workflow user exit somewhere.
Feel free to test this yourselves if you have 4.6C, quite easy scenario. Guess I'll try in ECC 6.0 too just to see...
And I'll report to SAP for sure.
Regards,
Krisztian Klausz

Wait for Event in Fork - How to terminate the wortkflow in leg 2

Hi Experts,
My scenario is that there is a fork with 2 branches. 1 has a change Doc method. In this I have raised an enent when a action is performed which in turn calls a wait for event in other leg. The problem is that the other loop is executing but the workflow is not coming out of leg 1. The work item remains in the agents workplace.
How to correct this?
Thanks,
Dinesh

in the FORK step you have an option of mentioning the "necessary steps".
it defines the minimum number of legs of the FORK step that must be completed before proceeding to the next step in the WF.
mention the necessary step as 1 for your case.

Wait for Event Step (Urgent).

Hi, all!
I m unable to successfully execute my WAIT FOR EVENT step in my Workflow.
Scenario:
Have my own customised screen for HR approval process. In the second step after displaying to the approver when he actually presses on the APPROVE button my APPROVED event for the same object is triggered. Now I m waiting for this event im my workflow. Done the WAIT FOR EVENT in the WF .ie. from WF container selected the BOR and assigned the APPROVED event in the WAIT FOR EVENT step.
Problem:
My WF is unable to catch the event .ie. even in SWEL, "NO RECEIVER FOUND".
Thanks and Regards,
Sudipto

Hi!
Thanks.
Actually I m facing a peculiar porblem...
Scenario: My WF has 3 steps.
1)The user fills in the initial screen.
2)Then it goes to the second person who adds comments and approves it.
3)This triggers the APPROVE event for the same OBJECT.
For which my WF has the WAIT FOR EVENT. After which there is just this SEND MAIL task
Problem:
My WF when executed by itself actually performs perfectly and the SEND MAIL is actually executed.
But when it is initiated from my ABAP prog...It goes to the next level user in line, where he adds his comments n then it goes to my WAIT FOR EVENT but my SEND MAIL is not executed.
As the 2nd step of display is done with the object key hence there shud not be any value passing prob from my prog.
I cannot understand the prob.....
Regards,
Sudipto
Message was edited by: Sudipto Barman

Wait for event - workflow 4.7

Hi, not sure if this is the correct forum for workflow or not but here is the problem. I have a custom BOR with 2 key fields, both character. The BOR has some some events one of these events is 'submitforapproval' and another is 'reviewed'. The 'submitforapproval' event is raised by an external R/3 program and is used to trigger the workflow in question. This works well. The 'reviewed' event is also raised by an external program and is used in a 'wait for event' step inside the same workflow. Once this event is raised the workflow continues. This happens sometimes without error and other times it can't find a receiver. I have looked at the event linkage through SWEINST when there is an error and while the receiver key is correct the object key holds incorrect information causing the 'receiver not entered' error. Why is this happening? When the workflow is triggered the event manager should set up the linkage for waiting event from the BOR key in question, why is this not happening? What can I do?
Any help will be appreciated,
Kevin

Thanks for the reply Gareth.
My WF C has a normal step in it that calls the A workflow.
I've tried numerous combinations, but as it is now, I have the WFINITIATOR, WFPRIORITY, ATTACHOBJECTS, and an object reference parameter being passed into workflow A.
Basically, that task just references the WS workflow object to kick it off.
WF A doesn't have any triggering events. It was previously manually initiated through the SWW_WI_START function in a custom transaction.
After the process has trickled through C->A->B and is at the wait step, I'm using another external custom transaction that initiates an event (for the wait step in WF B) using the SWE_EVENT_CREATE function. I'll be doing some more testing here today... but I have a feeling there's something wrong with the object key I'm passing through.
I'm not new to WF... but I've only really ever maintained existing workflows. We'll say I'm still learning the complexities. There is a pretty good chance that I'm just missing something really obvious or stupid.
Thanks for your help so far...

Wait for Event step in Workflow (Urgent).

Hi,all!
I am unable to implement the wait for event successfully in my workflow..
Sceanrio: I have created a container element in the WF with of type a BOR(ISUPARTNER) whose CREATED event is being waited for in the workflow.
Then in the WAIT FOR EVENT step in WF I m giving putting in the details of the event..
Then putting a send mail after this.
Problem: Now my workflow is throwing error and the send mail task is not executed even after the said event is done in the system..
Plz... suggest as to how to do it..
Thanks,
Sudipto

Now for this I m actually creating a container element of type BOR B in my workflow n putting a step WAIT FOR EVENT in which I m putting the CREATED event. For triggering the CREATED event no instance is required...
- Once again, Wait For Event step is only possible when the Object Key is available to the Workflow container when the flow reaches the event (are you waiting for a specific ISUPARTNER to be created or you don't care as long as some ISUPARTNER is created).
my event CREATED is not getting triggered automatically...
- First check if the standard system triggers the event for your object. If not explore different options for doing that.
For your scenario, check if you can trigger a custom event BORB_Created for BORA when BORB is created and use BORA in the Wait step.
Please post future Workflow questions in the Business Process Management forum.
Cheers,
Ramki Maley.
Message was edited by: Ramki Maley
Message was edited by: Ramki Maley

Error while completing Wait for event step

Hi Gurus,
I have a Workflow developed which has a "Wait for Event" step.
In that step,I am facing a problem .It seems the step is not getting completed properly.
When I check in SWEL it shows the Event is triggered.But the next which is a 'Send Mail' step is not getting executed.
The Event shows action status as "Receiver started correctly".
When i executed "Complete Manually " in SWIA,it executed correctly and also the further steps got executed.
What could be the issue ?
Many Thanks in advance !
Regards,
Ameya Kulkarni

Hello Ameya !
                 To one of my replies to this thread you have stated that no container elements are configured to wait for event step.
                 Without business object,event and container element with object reference, wait for event will not fire.
                 When the user changes the status in KO02, event fires and is seen in SWEL.But, if it should reflect in workflow, afore- mentioned details needs to be configured in wait for event step.
                Have you configured this wait for event step with event 2 ?
Regards,
S.Suresh

Process chain Error: This AND process is not waiting for event RSPROCESS

Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.S

Hi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli.

Bpm:message being sent and wait for event

Hi,gurus:
My scenario is about BPM.In the integration process I used a loop and correlation.The scenario worked successfully yesterday,but after I changed some thing,it did not work.The outbound status of the message in sxi_monitor said "message being sent".And when I clicked PE to see the workflow log, it said " wait for event".
Thanks in advance.

Could you tell me how to reimport the integration progress in ID?
reimport means...delete the already imported BPM from ID.....this would affect the corresponding ID objects....save and activate....and then again run the import Integration Process wizard....create the objects once again.....seems time consuming.....hence mentioned it as the last option in the list:(
Also from SWWL delete only the instance with status as ERROR.
Edited by: abhishek salvi on May 20, 2009 9:30 AM

Error in "Wait for event" step

Hi,
I try to use a wait for an event (CREATED) on a delegated subtype to business object KNB1.
Container element in the wait step is empty at the time of creation of the runtime wait item but I know what the key of the container element has to be so my idea was to set in a check funktion module in trx. SWEINST and filter out irrelevant events.
But when the waitstep is to be created, the workflow goes into error: WL 442 No valid object for the container element.
Should this not be possible?
Any suggestions for another solution?
I have also tried to instantiate the object before the wait for event step - but since the object does not exist in the database yet - method GENERIC.INSTANTIATE goes in error, too.
WAS 700 sp 11 with ERP 6.0 but also tried on a 620 with 4.7
Thanks,
Regards,
Claus Lücking

Hi Mark,
Yes, you are right - I am waiting for an event on a object not yet created:
I am waiting for a customer to be created in FI via change documents (table KNB1). Since the customer is going to be created in a company code that has a one-to-one reference to the sales organization where it is created first, I know the key of FI customer to be created.
Example: A Customer 23 is created in sales area 1000-01-01 and the workflow is triggered via an event KNVV.CREATED. Then I would like to wait for event KNB1.CREATED for customer 23 in company code 1000.
Thanks,
Claus.

NiDCPower Wait For Event

Hello,
I am using the PXIe-4139 SMU to source a current sequence that starts when a trigger is received and takes about 40 seconds to complete.
After the niDCPower Initiate VI I have inserted the niDCPower Wait For Event VI with a timeout set to 300 seconds to allow for enough time to receive the trigger and complete the sequence. This VI waits for the Sequence Engine Done Event.
Now this works fine, however, when the user wishes to stop the programm for whatever reasons, they have to wait the full 300 seconds until the Wait For Event VI produces a timeout error and stops the programm. This is rather inconvenient. How can I change the programm so that the user can stop it even when the Wait For Event VI hasn't reached its timeout?
I tried this:
But this doesn't work. For some reason, I get a timeout error with code -200474 but the boolean operator returns FALSE.
Any other ideas?

If there an output on the wait for event VI that flags a timeout? If so, set the timeout short (like 100 msec) and wait for 3000 timeouts before continuing on.
Oh, and use an event structure. Timeout event (timeout=0) checks the wait for event, value change event for button breaks out of loop.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Problem with wait for event

Similar Messages

Maybe you are looking for