Problem with Web Gallery (firewall issue??)
I have the following problem:
When I upload a webgallery from my office, everything works fine.
When I try the same thing from home, it doesn't work. I get a can't connect to .mac error.
What I also found out:
Looking at my .mac preferences from the system preferences panel works at home and at the office.
Looking at the web gallery tab under preferences in iphoto works ONLY at the office. At home I get a time out eventually.
Anyone have an idea? I do have a rather transparent network on both places.
Thanks!
Martin
ma_nj:
Welcome to the Apple Discussions. Try deleting the iPhoto preference file, com.apple.iPhoto.plist, from your User/Library/Preferences folder on you home computer. Then try again.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Similar Messages
-
I ran into a problem with web gallery creation. The problem is that LR uses the image file name, without the extension, to create the small images and the html documents. No image renaming is done.
Now I am trying to create a website, and conflicts occur between files generated by different cameras, and even by the same camera since because it restarted counting at 0000 several times over the years. The resulting website is useless.
Obviously, i could work around the issue by exporting the images, renaming them, and then re-importing. This takes hours!!
So please, can Adobe do some file renaming while generating a web gallery??? Hope someone listens!!!
Job Honig**Update**
Working now. We were doing javascript:; browser pop to this page and if the Height of the window exceeded the ie6 laptop screen size the flash gallery would fail to work. When I changed the height to 690 (from 800) it worked fine. Go figure...
Is this a known flash issue that I was out of loop on? Do we need to keep window sizes in mind?
I have LR 1.3 and IE6 is not showing thumbnails on my flash gallery output.
Also note that I had to remove the xml doc type (line 1) from the index file or I would get a parse error on our server (it worked fine locally and on my leopard MAMP websrv testing environment.)
Seems to be working on all other browser/platforms but IE6 is by far the most popular for our website.
Flash Gallery -
Problem with web.show_document with Jinitiator and Firefox
Not sure Firefox 2.0 is officially certified with Forms 9.0.4.1 and Jinitiatorbut regardless we have some users who want to use this combination. Everything seems to work fine except for the calls to web.show_document which opens a new browser window and displays some html etc.
The problem is that even though the client Forms JVM is Jinitiator (1.3.1.18 or .21) when the call to web.show_document occurs somehow the Sun Java Plugin starts and having the two JVM's at once causes a fatal crash in Firefox. Can anyone suggest a way to preven the second JVM from opening?
When the user uses the Sun Plug as the client Forms JVM there is no problem as the second JVM does not open. Unfortunately some users insist on Jinitiator with Firefox hence the problem. -quinnJames,
This whole applet embedded in a browser model for webforms is driving us batty at times. The list of problems includes:
1) Users are constantly tempted by browser controls and accidentally do all sorts of things to get them in trouble. This has included but not limited to using the navigation arrows, jumping off to read their email in the same window as the form and returning to a dead forms session, minimizing, resizing, blurring off to another window and then returning back by clicking on the title bar of the browser and wondering why the form doesn't tab etc.
Sure hobbling the browser by opening with limited functionality is a possibility but not a complete solution.
2) New versions of browsers seem to break something. Both IE 7 and Firefox 2 have their own problems with web.show_document, especially file associations such as CSV and DBF and trying to open things in Excel in IE7.Firefox seems to have less problems for some yet some some oddities like the one that started this thread (and 2.0 opening new windows in tabs by default instead of windows).
3) JVM jigsaw puzzle. Is it Jinit or Sun, which versions? Which combinations of browser version and JVM works.
4) General fragility of the whole architecture. Running a client JVM in a web browser on top of a PC Operating system connectiong to a forms server over a network embedded in a Java Container server on a full blown web server running on a unix operating system is pushing the bubble. Throw in the mix that any of these components can be combined in numerous ways makes one wonder how it works as well as it does.
Still users randomly getting dropped connections to forms server (network gltches?). General sluggishness (poorly written forms?). Periods of users with unduplicatable errors primarily network related it would appear.
General feel that it is not rock solid stable. Perusing metalink documents on performance and tuning gives too much and too general info to troubleshoot so just shrug shoulders and say 'network problem'.
What's the solution? Java webstart would seem to help at least with the browser realted issues but is that supported and documented how to use yet. Also we'd lose web_show_document which is critical (could it be replaced by webutil calls to open browser?).
-quinn -
Hi to all.
With ios 5.01 I have a little problem with image gallery. As you can see I have only 1 image, but there is always this **** message "download 0 of 46) (sorry, but I'm Italian )
I've removed my icloud account from settings, but there is nothing to do, this message don't goes away. What I can do? Thanks in advanceHello,
Just adding a gallery I want to do the same slideshow WoodWing's, but in InDesign, if anyone knows of?
Thank you
Link video slideshow WoodWing's: http://www.youtube.com/watch?v=Xt6gNaEZ0-M&feature=relmfu
The first slideshow shown -
Hello,
I have a big problem with web.xml.
i can run the servlet demos with the default web.xml, but when i try to user a costum web.xml files, i receive a 404 page not found on a link.
i have some dificulty to post here. but can somebody help my with my web.xml files?
thanks for your help.
have a nice day!Be careful with the place of your files and folders. It's possible that you've just mentioned the cause of your problem.
My web.xml is
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>gco</display-name>
<description>gco webapplicaties</description>
<servlet>
<servlet-name>MopoController</servlet-name>
<servlet-class>org.gertcuppens.controller.MopoController</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>MopoController</servlet-name>
<url-pattern>/MOPO</url-pattern>
</servlet-mapping>
</web-app>
When I want to call my web application locally, I use the URL http://localhost:8080/gco/MOPO.
The http://localhost:8080 calls Tomcat. With /gco, Tomcat knows it should look for a folder gco inside the webapps folder. This one should contain a WEB-INF/web.xml folder for further instructions.
With /MOPO Tomcat knows, having read the web.xml files of all webapps folders at start, it should look for a servlet with the name MopoController. And this MopoController points to the class org.gertcuppens.controller.MopoController. So, Tomcat knows where to find everything.
Try to see whether your Tomcat can find everything inside the folders using your web.xml file. -
Dreamweaver Templates with Web Gallery
I have built a site in dreamweaver CS4 I have used a Dreamweaver Template for my pages. Rather than clog my pages up with images I used Adobe Bridge to create a web gallery, It created a gallery ok and I saved it to my hard drive. It created two items, a resourses folder and an "index" file. So I I copied and pasted the two items into my Dreamweaver folder I created and called SS_Bridge. I pointed a link I created to point to the "index" file within the SS_Bridge Folder in Dreamweaver, Will this create a problem as there will be two "Index" files within my site
jjrutterThe "home" page index file would be at the root level of the site. Other folders within the root can all have their own index (default) files.
-
Problems with Zone based Firewall and mtr (mytraceroute)
We are using ZFW on an ASR1001 and have experienced a problem: when I try to use mtr (mytraceroute, see
http://en.wikipedia.org/wiki/MTR_%28software%29), I am getting packetloss on all hops between the source and the destination. e.g.:
<code>
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 100.0 8 0.0 0.0 0.0 0.0 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 100.0 7 0.0 0.0 0.0 0.0 0.0
7. de-cix20.net.google.com 100.0 7 0.0 0.0 0.0 0.0 0.0
8. 72.14.238.230 100.0 7 0.0 0.0 0.0 0.0 0.0
9. 72.14.239.62 100.0 7 0.0 0.0 0.0 0.0 0.0
10. 209.85.242.187 100.0 7 0.0 0.0 0.0 0.0 0.0
11. ???
12. ???
13. ???
14. bk-in-f94.1e100.net 0.0% 7 20.0 20.6 20.0 21.2 0.4
</code>
So it seems that the Firewall on my asr1001 is throwing away all packets with ttl-exceeded coming back from hops in between, they have another destination address.
At the moment I am inspecting all kind of traffic from my network outgoing:
ip access-list extended 101
permit ip any any
class-map type inspect match-all cmap1
match access-group name 101
policy-map type inspect pmap1
class type inspect cmap1
inspect
etc... (zones, zone-pair in-out with policies applied)
So I tried to let pass all icmp-traffic from the outside to my network:
class-map type inspect match-all cmap_icmp
match protocol icmp
policy-map type inspect pmap2
class type inspect cmap_icmp
pass
etc... (zones, zone-pair out-in with policies applied)
So this has no effect, but I tested and I could figure out, that when I pass all icmp-traffic from my network to the outside, THEN mtr does work.
BUT then normal ping does not work anymore, because it will not be inspected any more.
But I want to have a secure Firewall with inspecting echo-replys and working mtr anyway.
Has anyone the same problem or can even solve this issue?
Thanks in advance,
StefanHi Andrew, thanks for Your answer...
So I have now:
class-map type inspect match-any cmap_icmp
match access-group name icmp_types
ip access-list extended icmp_types
permit icmp any any ttl-exceeded
PMAP IN--> OUT
(don't be confused, my "vlanxxx_pmap_in" is the pmap FROM my network TO the outside...)
policy-map type inspect vlan664_pmap_in
class type inspect vlan664_cmap_in (this is an extended ACL "permit ip x.x.x.x any")
inspect
class type inspect ipsec_cmap_in (this is because I have problems with VPN when inspected, another problem...)
pass log
class class-default
drop log
PMAP OUT-->IN
policy-map type inspect vlan664_pmap_out
class type inspect cmap_icmp (here comes the "ttl-exceeded"-ACL)
pass log
class type inspect vlan664_cmap_out (some open ports for some clients)
inspect
class type inspect ipsec_cmap_out (same problem with VPN when inspected)
pass log
class class-default
drop log
But unfortunately, the same problem occurs. Curiously, the first two packets seem to go "through" the firewall, but with 3rd packet the packetloss comes up:
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 50.0% 3 0.3 0.3 0.3 0.3 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 50.0% 3 0.9 0.9 0.9 0.9 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 0.0% 2 2.7 2.7 2.7 2.7 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 0.0% 2 1.5 1.5 1.5 1.5 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 0.0% 2 2.5 2.5 2.5 2.5 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 0.0% 2 4.1 4.1 4.1 4.1 0.0
7. de-cix20.net.google.com 0.0% 2 5.0 5.0 5.0 5.0 0.0
8. 72.14.238.44 0.0% 2 39.2 39.2 39.2 39.2 0.0
9. 72.14.236.68 0.0% 2 5.4 5.4 5.4 5.4 0.0
10. 209.85.254.118 0.0% 2 5.4 5.4 5.4 5.4 0.0
11. ???
12. google-public-dns-a.google.com 0.0% 2 5.5 5.3 5.2 5.5 0.2
Packets Pings
Host Loss% Snt Last Avg Best Wrst StDev
1. Stuttgart-I28-1.belwue.de 66.7% 4 0.3 0.3 0.3 0.3 0.0
2. Stuttgart-AL30-1-gi0-0-0-3.belwue.net 66.7% 4 0.8 0.8 0.8 0.8 0.0
3. Karlsruhe-RZ-1-10GE-0-1-0-1.belwue.net 66.7% 4 2.1 2.1 2.1 2.1 0.0
4. Karlsruhe1-10GE-4-0-0.belwue.net 66.7% 4 1.5 1.5 1.5 1.5 0.0
5. Mannheim1-10GE-3-0-0.belwue.net 66.7% 4 2.6 2.6 2.6 2.6 0.0
6. Frankfurt-DECIX-1-10GE-0-0-0-0.belwue.net 66.7% 4 4.2 4.2 4.2 4.2 0.0
7. de-cix20.net.google.com 66.7% 4 5.3 5.3 5.3 5.3 0.0
8. 72.14.238.44 66.7% 4 70.3 70.3 70.3 70.3 0.0
9. 72.14.239.60 66.7% 4 5.8 5.8 5.8 5.8 0.0
10. 209.85.254.116 66.7% 4 5.8 5.8 5.8 5.8 0.0
11. ???
12. google-public-dns-a.google.com 0.0% 4 6.3 5.7 5.2 6.3 0.5
In the sessions on the routers, I see only this entry:
Session 206F66C (129.143.6.89:8)=>(8.8.8.8:0) icmp SIS_OPEN
Any other suggestions? -
When first setting up my web gallery, I accidently imported an incorrectly named folder with pictures that I didn't want public. I removed the file on iphoto, however it still exists on the webgallery and I am unable to edit it. Ultimatly I would like to delete it. Can anyone tell me how?
Go into iPhoto's preferences/Web Gallery section, click on the web gallery in the window and click on the Stop Publishing button. Then recreate the gallery and republish.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Hi,
We are facing some problem in WAD.
We have developed some reports based on views and as well on queries.
As per our requirement we merged all the reports in a Standard web Template, and we are using table and graph as web items for the template, here the user can select any report becoz we have query selection option, then it will display the particular report. But we are getting the problem with the Template.
While publishing the template we will get three tabs 1.DATA ANALYSIS, 2. GRAPHICAL DISPLAY 3.INFORMATION. in the initial screen that means in the DATA ANALYSIS tab it should display only the table, but in our case it is displaying both table and graph.
And also if you select graphical tab then that should highlight the particular tab and with the particular graph, but the tabs is not highlighting when you selecting that.
If you have any solutions please let us know.
Regards,
Nossum Chandu.Hi
I have having almost similar problem. The difference is that it is other way around.
The problem is from Development server instead from production. I am not using slandered template.
I have done following but fail to resolve it-
1) Loading templates using WAD gives inconsistency error. Object "...." is inconsistent.
Recalling query in QD returns following two errors "BEx transport request is not available or not suitable 0", "Choose an existing request 0"
2) While running the query using TX RSRT2 (Query Monitor support package X), returns error "An error has occurred in the script of this page" Line 11039, Char 1, Error Access is denied and so on...
3) ICM ok, Services are checked.
4) SM50 log does not give any clues
5) There is no URL issue.
6) BW Functionalities are active.
Could some suggest?
Thanks in advance -
Linux install problems with Web Dev Pack 1.1
Any one else having problems installing Web Services Dev Pack 1.1 for Linux that was released on 2/25 ? It gets about 55% finished in the install and then it complains about moving certain jaxp files to $JAVA_HOME/jre/lib/endorsed dir. I do put the files in the endorsed dir but the install does not continue. It also fails when starting over reporting the same issue.
Thanks for any help and work arounds.
eugeneI am having the same problem installing on Red Hat 8.0....
I receive a message like the following
<PRE>
Java(TM) Web Services Developer Pack 1.1 will be installed in the following
location:
/usr/java/jwsdp-1.1
with the following features:
JAXB Version 1.0 (Java Architecture for XML Binding)
JAXM Version 1.1.1 (Java API for XML Messaging)
JAXP Version 1.2.2 (Java API for XML Processing)
JAXR Version 1.0_03 (Java API for XML Registries)
JAX-RPC Version 1.0.3 (Java API for XML-based RPC)
SAAJ Version 1.1.1 (SOAP with Attachments API for Java)
JSTL Version 1.0.3 (JavaServer Pages(TM) Standard Tag Library)
Java WSDP Registry Server Version 1.0_04
Tomcat
for a total size:
67.7MB
Press 1 for Next panel, 2 for Previous panel, 3 to Cancel or 4 to
Redisplay [1] 1
Installing Java(TM) Web Services Developer Pack 1.1... Please wait.
Errors occurred during the installation.
Press 1 for Next panel, 2 for Previous panel, 3 to Cancel or 4 to
Redisplay [1] 1
</PRE>
then in the install directory, there is a file....log.txt containing:
<PRE>
(Mar 5, 2003 9:19:14 AM), Setup.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl$Installer, err, ServiceException: (error code = 315; message = ""; severity = 0)
STACK_TRACE: 24
ServiceException: (error code = 315; message = ""; severity = 0)
at com.ibm.wizard.platform.linux.LinuxRegistryServiceImpl.getPackageInfo(LinuxRegistryServiceImpl.java:221)
at com.ibm.wizard.platform.linux.LinuxRegistryServiceImpl.getSoftwareObject(LinuxRegistryServiceImpl.java:142)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
at com.installshield.product.service.registry.GenericRegistryService.getSoftwareObject(GenericRegistryService.java:120)
at com.installshield.product.service.product.PureJavaProductServiceImpl.setSoftwareObject(PureJavaProductServiceImpl.java:1582)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$14(PureJavaProductServiceImpl.java:1578)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.addToVPD(PureJavaProductServiceImpl.java:4662)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.checkInstalledVersion(PureJavaProductServiceImpl.java:4632)
at com.installshield.product.service.product.InstallableObjectVisitor.visitSoftwareObject(InstallableObjectVisitor.java:252)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBean(InstallableObjectVisitor.java:171)
at com.installshield.product.service.product.InstallableObjectVisitor.visitSoftwareObject(InstallableObjectVisitor.java:208)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBean(InstallableObjectVisitor.java:171)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:122)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4355)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3590)
at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:40)
at java.lang.Thread.run(Thread.java:536)
</PRE> -
Is anyone else having a problem with a "no service" issue on the iPhone 5?
There are times my phone will go to "No Service" when the signal is low. I just got the iPhone 5. I did not have this problem with my 4. It doesn't say "searching..." it just automatically says "No Service" for a few seconds and then back to having bars. It comes and goes. I had my phone replaced at the Genius Bar and still have this problem. Is anyone else also having this problem? I hope it's just a software issue they will solve with an iOS update.
I have this problem all the time. when i get back home from a overseas trip (about 3-4 times a month) I have to turn airplane mode of and on a few times to get rid of the "No Service" message.
-
Wierd problem with web start in windows 7
I have a wierd problem with my web start app in windows 7, it just hang it self. it work fine in windows XP and Vista.
The wierd thing is that i can open the app but when i press on a specific button that will make a jlabel present a .png image everthing crash. why do i get this problem now? when i start the app, i load some pic i jlabels and that seems to work fine, but when i do it under the exection it seems to crash, why?
Should i do something different to make the app work in windows 7?
I hope someone can help me out!!You should:
a) open the console (java control panel, advanced options) and see the stackTrace (if any). If it's not there check for swallowing.
b) post a code snippet, to at least show how and where you retrieve the png. Possibly a SSCCE.
c) check if this happens also running as a standalone app (may be more Swing-related than JWS-related).
Bye. -
[Solved] Problem with Web.show_document
Hi all,
In the custom.pll I use a Web.show_document() to get a file from the server.
The URL is for example "http://10.0.0.20/test/159083.apn"
I tested this and the browser (IE) is opening this file as a text file.
Now I want that the .apn file must be opened with a specific program. So I added .apn to the registry.
I typed manually http://10.0.0.20/test/159083.apn in the browser and the program I prefer is starting up now.
But if the custom.pll executes the Web.show_document() now in a split second I see a flash of a screen and that screen is closed again. I don't know what screen but I think it is the browser.
After that nothing happens anymore.
Does someone here has any idea of what is going wrongSolved it.
It's a browser security issue.
In the custom security settings "Automatic prompting for file downloads" must be enabled.
If this is disabled you normal get the yellow warning bar. But with Web.show_document() the browser opens and closes very fast. -
Problem with web service that returns an object with a String that have som
Hi everybody:
I have a problem with a web service I am doing, I have made a web service that returns a collection of objects, the objects have a set of properties, there is one property that is a String,this property consists in a text fragment that could have some characters that are considered special in XML like &, <, >, " and that's why when I execute the service from a client an exception is thrown:
{code}
Exception in thread "main" org.codehaus.xfire.XFireRuntimeException: Could not invoke service.. Nested exception is org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
at org.codehaus.xfire.fault.XFireFault.createFault(XFireFault.java:89)
at org.codehaus.xfire.client.Client.onReceive(Client.java:410)
at org.codehaus.xfire.transport.http.HttpChannel.sendViaClient(HttpChannel.java:139)
at org.codehaus.xfire.transport.http.HttpChannel.send(HttpChannel.java:48)
at org.codehaus.xfire.handler.OutMessageSender.invoke(OutMessageSender.java:26)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:79)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:114)
at org.codehaus.xfire.client.Client.invoke(Client.java:336)
at org.codehaus.xfire.client.XFireProxy.handleRequest(XFireProxy.java:77)
at org.codehaus.xfire.client.XFireProxy.invoke(XFireProxy.java:57)
at $Proxy0.search(Unknown Source)
at cu.co.cenatav.webservices.client.Client.main(Client.java:26)
{code}
I know that this is happening because special characters are sent by the soap message but I don't know how to solve this problem.
How could I avoid this exception ?
I hope you can help me.
Regards.
ArielHi,
BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
In general though, I would highly recommend this best practice:
1) Start by define the WSDL contract first
2) Then generate the server side skeleton to implement it
3) Use BPEL as the client to this contract.
By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
Edwin -
Binary data problem with web services on JRockit but not Sun JDK
I have a problem with binary data in SOAP and JRockit
(jrrt-3.0.0-1.6.0-linux-x64.bin) . I have an set of web services based
on EJB 3.0 which return images as byte arrays inside a SOAP envelope
to be consumed by .NET 2 services. The host app server is Oracle
Application Server 10.3.1 on RHEL Linux update 4, on 64 bit Xeon 5500
series HP blade hardware.
While most images are fine most of the time, one particular image
gives this message when being consumed in the .NET client:
The '■' character, hexadecimal value 0x1F, cannot be included in a
name. Line 2, position 380038.
The MSDN suggests that this is usually caused by non-escaping of reserved XML characters like < but this isn't one of those.
The SOAP looks ok and for the life of me I can't see why this ought to
be a problem, especially since the problem doesn't arise running with
the SUN JDK 1.6_06 64 bit)
When making the same call from the OAS Enterprise Manager, I can make the same call with no problem (but the data is just rendered as character data in a browser) which maybe suggests some incompatibility with how JRockit is serializing the data ?
Any ideas, I would be very happy to hear - JRockit gives a 15% or so
speed boost to the website that these services power so obviously we
want to use it if possible.
Edited by: RichLiv on Nov 14, 2008 4:54 AMSeems to be the case that using MTOM stops this problem with JRockit. Strange but apparently true (so far).
Maybe you are looking for
-
I am afraid to download the new update software ios 6.1.6. Because everytime I let it put new software on, It makes my Ipod 4th generation mess up one way or another. Usually it makes the wifi go off and I cannot get it back on. Then I can't even use
-
I have the 13" Late 2011 Macbook Pro, What are the best Battery Life saver/increaser Techniques?
Specs- 2.4 Ghz Intel Core i5 4GB 1333 MHz DDR3 intel HD 3000 384 MB How can I prevent My battery from degrading or atleast make the degrading slower Can Ya tell me the steps or things to do? I use my Mac a lot, like 6-15 hours everyday. Someone told
-
Can't set monitor resolution to 1900x1200
I have an HG281D monitor (hanns-g) with native resolution 1900x1200. Mac OS won't let me set the resolution higher than 1900x1080. How can I fix this? The display is clearly stretched vertically in its current configuration. Thanks, Adam
-
How does one transfer all images from a PC to a Mac AND ensure that the meta data and tags are included? At present I have my entire catalog backed up on an external hard drive ready to go.
-
?How can I install a postscript printer in order to export to pdf?
How can I install a postscript printer in order to export to pdf?