Problem with webgui ERROR = IcmBufFree: MpiFreeBuf failed

Hello,
I have webgui enabled.
When I'm trying to logon via address
http://192.168.0.201:8010/sap/bc/gui/sap/its/webgui
when I click logon button nothing happens. My ICM trace file (trace level 3) says:
[Thr 1268] *** ERROR => IcmBufFree: MpiFreeBuf failed [icxxplugin.c 1516]
but when I'm trying by
http://host.domain:8010/sap/bc/gui/sap/its/webgui
it is working properly.
No https enabled.
Regards,
Michal

Hi,
As the URL is working with hostname and not with ip address..
You might need to put an entry for corresponding host name and ip address in your host file.
check if it is working.
Cheers !!!
Ashish

Similar Messages

I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again. What should I do?

I just bought v10.7lion but when I try to install it comes with this error message:"Install Failed"...try to install again. Now I've been restarting over and over again. What should I do?

JPPI-
Did you try it with the iTunes your Mac already has?
Try running Software Update in your System Preferences. That should bring your computer up to the latest software available for 10.4. You would end up with an older version of iTunes, but that may be good enough to activate your iPad.
Fred

Hello ! I'm using iphone 5 running ios 7.1.1 I have problem with Appstore error and also Safari don't work too. What can I do to fix this problem ?

Hello ! I'm using iphone 5 running ios 7.1.1 and I have problem with appstore error and also Safari doesn't work. what can do I fix this problem ? I need help now my iphone can't do nothing

Need more details. What is your appstore error exactly? and what happens when you try to use Safari?

Export release build failed with an error message: complilation failed while excuting : compile-abc

I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

Iphone problem with itunes error 1603 on restore

I allowed my iphone battery to fully discharge and upon recharging got the error message with a large exclamation mark “please connect to itunes”. When I connected to itunes I was told that the phone was in recovery mode and needed to be reloaded. Itunes went out and downloaded the new firmware and began the install process after I approved the input screen that said it would wipe out all my data. 1/3 of the way through the process I received a message box that told me the process had failed to restore the iphone for an unknown error (number 1603).
After looking online and calling ATT as well as Apple the best solution I received was to send the iphone in for replacement (i am 5 hours from an apple store). After fiddling around I have managed to solve the problem on my own.
After trying everything else with no results, I pulled the SIM card out of the iphone and plugged the iphone into my computer. Itunes then reloaded the software and firmware successfully. I then put the SIM card back in and synced it up with itunes and it asked me to confirm the resync. Afterwards it just worked fine.
My iphone works again!

"1- suddenly my iPhone 5 lost mobile company signal and word searching appears instead but no signal for the hole day so I changed the sim with other provider and since it gave me the same result I searched the web and the seems no solution other than restore.
I did restore and update to iOS 7.0.4 but at the restore takes at the last 1% in the last moment of restore it will take loooong time then gave me error 3. And now for more than a month the iPhone stuck with recovery logo. Almost I tried every trick in the book . Change USB cable, port, PC. PC with other OS . Even freezing the iPhone as I read here noooooo result the same happened again and again."
I have exactly the same problem with my iPhone 5s!

We are getting faxes with 812 error - "Document conversion failed" in SOST

Hi
We are getting faxes with an 812 error - "Document conversion failed" in transaction SOST. The user is sometimes able to fax the number successfully, but other times fails - it is not consistent.
The conversion rules seem to be set up correctly, indeed, on a resubmit this often (but not always) works, so I don't think this is down to the conversion rules.
Is it a problem at the SAP side or the receiving system?
We enabled a trace but on analysis the only step that appears to be different in the failing ones is:
Status "Fehler" am Sendeauftrag gesetzt
Which I believe roughly translates that it failed to send - but why, and where can I find more detail?
Thanks
Ross

I also noticed in the trace that the faxes that work have the following lines:
Determined device type: POST2. OTF Device Type POST2
Format conversion from OTF to PS With Device Type POST2
Converting OTF to PS
Whereas the ones that have failed say:
Determined device type: PDF1. OTF Device Type PDF1
Format conversion from OTF to PDF
Conversion rules for this country PL (Poland) and 'blanks' in order of prioroty are:
PDF                   S POST2
PDF PL Polish S ID2PDF
PS                          POST2
PS PL Polish   S I2SPOST
Is that correct?
Cheers
Ross

After installing firefox 4.0 I've been having problems with rundll error on startup. Norton scan is finding a high risk malware.

Last week I installed firefox 4.0 beta & the next time the computer was restarted a rundll error window appeared that said windows cannot locate file. This file showed up in the startup programs. When norton finds this which is every 1 or 2 days it removes it after a restart but the error & malware comes back. I went back to firefox 3.6 but still have this problem. Can you help?
Thanks, Dennis

It seems unusual that Norton should block and remove firefox updates. Having said that I was posting in a thread about problems with Norton a few days ago see [https://support.mozilla.com/en-US/questions/789617#answer-143767 thread] ''"I down loaded fromFFox the latest down - norton 360 - stopped the down load - stated not to use it - asked to stop running the program - I click yes thinking a problem now on my other computer I cant use FFox as a Browers -"''
I use Norton (NIS) and received only a mild advisory on one Firefox update. I have Windows XP with Firefox3.6.15 & 4RC installed

Problem with call error / call restart

If during a call with the Bluetooth car speakerphone on and - due to loss of signal, or anything else - I get a call error, in the lock screen there is a message of error with black color font and (!) icon, and until there is nothing strange, right? But next, if I try to unlock the iPhone the lost call restart automatically even if I would not to do it..
Is there anyone with such a problem? Any solutions?

I encounter a similar problem with 9.1.1.
My problem is link to this bug ID : CSCtq10477.
Mathieu

Problem with repair error 1311, and trouble reinstalling.

I am having problems with reader, so I tried to do a repair but got error 1311. I uninstalled not im having trouble reinstalling...

Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows

Latest iTunes update problems with repeated error messages every 65 seconds??

After this mornings' update of iTunes. Problems with Applemobiledeviceservices.exe. Error message every 65 seconds - software exception (oxc06d007e) occurred in the application at location 0x7c812fd3.
How do I stop this?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

TS3694 what is a problem with this error (3194)

I have a problem with my iphone. I want to update my version 5.0.1 to 6.0.1 and we see this error 3194. What I need to do?

I'd start here
http://support.apple.com/kb/TS3694

Problem with ipad error 9

I'm having problems with restoring my ipad. Error 9

Have you had a look at http://support.apple.com/kb/TS1275? It suggests Error 9 is a USB issue, so you can try other USB ports, perhaps a different cable, or even trying to restore on another computer, if you have one to hand.
Hope that helps,

Problem with Imovie : error -50 when exporting

I have a problem with Imovie, I am trying to export my video but i receive a message: error -50 .
What should I do ?

I have a problem with Imovie, I am trying to export my video but i receive a message: error -50 .
What should I do ?

IF YOU HAVE PROBLEMS WITH INSTALLATION ERRORS, REMOVE YOUR NON FACTORY RAM

I was having all kinds of errors with the installation of 10.5, I read about removing non factory ram. I did this and the installation worked just fine with no errors.
Except now I have a new problem where it won't recognize my user name and password. Apple has a post on how to correct this problem. I have done what they said and it does now work.
Now I am on the phone support hold line.....

polatfromfairfax wrote:
my friend, I hate to do this; all the possible variables are eliminated..if you really pay attention to my main point,
Mh friend, forgive me for asking something you didn't mention, "just to be sure."
it is high time for everyone to accept that this is not a end-user error...this is simply a firmware issue Apple engineers choose to ignore
Posting here is extremely unlikely to get Apple's attention.
Have you reported it? To an Apple Store, AppleCare, a Bug Report, or the Feedback site? If not, please do so. See Reporting a Problem to Apple if you're not sure how.

Problem with backup : error 0x8007045D

Hi guys
few days ago i bought ge60 apache,, i was trying to make a backup dvd form the originall windows 7 (home premium) installed o my laptop,, with msi burn recovery
but at end of burning the first disk, the verifynig lasted with this error 0x8007045D
i tried times with turning of the antivirus,, but still no difference
any one knows something about this error? and how can i fix this?

Quote from: BlueAlexFPS;108667
I think your origional OS should be Windows 8/8.1? This did not support made on Windows 7 recovery DVD.
in my country was win 7 :(
Quote
Try to make the recovery ISO files first by using MSI BurnRecovery tool and see if the error message still shows up.
i tried but error was still remained
msi burnrecovery worked ok, when i tried in safe mode
thanks guys

Problem with webgui ERROR = IcmBufFree: MpiFreeBuf failed

Similar Messages

Maybe you are looking for