Problem with weblogic soa_server1 install and start

Hello -
I installed the SOA suite infrastructure, and upon starting the weblogic server and the managed weblogic server 'soa_server1' , I am getting the error
Failed to initialize the application 'wsm-pm' due to error weblogic.application.ModuleException:
Exception preparing module: EJBModule(wsm-pmserver.jar)
[EJB:011023]An error occurred while reading the deployment descriptor
I used the install file ( from the book getting started with oracle soa 11g -- by Heidi Buelow, Manas Deb, Jayaram Kasi
Demed L'Her, Prasen Palvankar
1. wls1031_win32
2. ofm_soa_generic_11.1.1.2.0_disk1_1of1
Here is the complete error message I am getting -
Failed to initialize the application 'wsm-pm' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(wsm-pmserver.jar)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
javax/wsdl/Definition..
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.ClassNotFoundException: javax.wsdl.Definition
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
at java.lang.Class.privateGetPublicMethods(Class.java:2547)
at java.lang.Class.privateGetPublicMethods(Class.java:2557)
at java.lang.Class.getMethods(Class.java:1410)
at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.getImplementedInterfaces(EjbAnnotationProcessor.java:1702)
at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processSessionAnnotations(EjbAnnotationProcessor.java:460)
at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:322)
at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:192)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processStandardAnnotations(EjbDescriptorReaderImpl.java:332)
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:192)
at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1210)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:382)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks
Tushar

Hi Tusha
Looking at your installers, I feel there is some inconsistency.
1. wls1031_win32
2. ofm_soa_generic_11.1.1.2.0_disk1_1of1
ofm_soa_generic_11.1.1.2.0_disk1_1of1 - This is latest and greatest version of SOA 11gR1 Patch Set 2 (11.1.1.3.0). This CAN be installed only on Latest Version of Weblogic Server which is WLS 10.3.3. Where as you have older version of WLS which is wls 10.3.1.
So best is to download this latest version of WLS 10.3.3. Then install SOA on top of this WLS. Create SOA Domain which has one admin server and ofcourse one managed server soa_server1. And you should be all set. I hope you already ran rcu.cmd (Repository Creation Utility) that creates schemas for all SOA Stuff. This RCU is pre-requisite for SOA.
I have same setup on my side and it works fine. I could start my soa_server1 without any issues. Instead of WLS 10.3.3, I used WLS 10.3.2 as that was only available few days back when SOA 11g R1 was released.
Some links for reference:
http://www.oracle.com/technology/products/soa/soasuite/collateral/downloads.html
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html (you can download just Oracle WebLogic Server 11gR1 (10.3.3) ZIP Installer - instead of first 2 installers that has OEPE etc)
HTH
Ravi Jegga

Similar Messages

  • Has anyone had the same problem with IOS 6 install and McAfee flagging certain IOS 6 install components as Malware?

    I was using ITunes to install IOS 6 on my 64GB IPad 2 when McAfee on my IMac (Software  OS X 10.8.1 (12B19)) reported that it had found Malware and had put the offending file into quarantine. The IOS 6 install process then tried to re-write the file. This happened with three seperate files that the IOS 6 install process was attempting to write, effectivley causing a stall in the process. The only way I could get the install process to complete was to go into the McAfee preferences and change quarantine to notify. The process then completed.  Has anyone else come across this problem?

    Hmmmm... That did not work.  I did the full restore on the ipod touch (Losing that is the lesser of the two evils if I screwed it up) and before I resynced it, I unplugged it and tried to plug it into the wall adapter.  But it would not charge.  Plugged it back into the computer and it popped right up with the lightning bolt on the battery and began charging.
    So I resynced it and at least all my stuff is still there.  Not going to bother trying with my phone if it didn't work on the ipod touch.
    I can assure you my 4s is out of warranty.  I've had it for 2 years. 

  • Problem with WebLogic 10.1 and SOAP request

    I have some relatively simple code that is making a SOAP request and trying to parse the response. The code works fine in Tomcat 6, but fails when running under WebLogic 10.1. At first, the problem was with the implementations of MessageFactory and SOAPConnectionFactory. After some research, I added the following to the startWebLogic.sh file
    -Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl
    -Djavax.xml.soap.SOAPConnectionFactory=weblogic.wsee.saaj.SOAPConnectionFactoryImpl
    That resolved the initial problems, but now I get the following error when making a call to the getTextContent() method of an instantiation of the org.w3c.dom.Node class.
    java.lang.AssertionError: UNIMPLEMENTED
         at weblogic.xml.domimpl.NodeImpl.getTextContent(NodeImpl.java:198)
    In my research, it seems that the "-Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl " option should have resolved that issue, but it does not. I am including the relevant section of code below for reference. If anyone has a suggestion as to how to fix this issue, I would be very grateful. Thanks in advance!
         fis = new FileInputStream(_outputFileName);
         MimeHeaders hd = new MimeHeaders();
         hd.addHeader("Content-Type", "text/xml;charset=UTF-8");
         hd.addHeader("SOAPAction", "/service/doCallAPI");
         MessageFactory factory = MessageFactory.newInstance();
         SOAPMessage request = factory.createMessage(hd, fis);
         SOAPConnectionFactory soapConnectionFactory = SOAPConnectionFactory.newInstance();
         SOAPConnection connection = soapConnectionFactory.createConnection();
         SOAPMessage response = connection.call(request, new URL(_pdfHostUrl));
         NodeList documents = response.getSOAPBody().getElementsByTagName("FileProp");
         Node node = documents.item(0);
         String textContent = node.getTextContent();
    -----------------------------------------------------------------

    Hi Else,
    We'd really like to reproduce this problem and get to the bottom of what is causing it, so that you could upgrade in the future.  Would you be willing to send me a data set consisting of your TDM, TDX, TDV, and video file?  You can either post here or send it directly to my email at:
    [email protected]
    Thanks,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Problem with PE12 sign in and starting: keeps asking me to sign in and then crashes

    Hi all,
    I got PE12 through my wacom tablet, and i just started it for the first time today. It asks me to sign in, and after entering everything, the window disappears (seems like the app crashed). When I click on the app again, it asks me to sign in again.
    Has any body seen this before? Please help.
    Thank you.

    Hi,
    On Mac, opm.db is present in User's Library.
    Since User's Library is hidden on Mac,follow the steps mentioned in the link below:
    Access hidden user library files | Mac OS 10.7 and later
    Once you enter User's Library browse to Application Support/Adobe/OOBE/opm.db
    Thanks,
    Shikha

  • Severe problem with installing and starting Audio-DVD Pla

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

  • I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct?  Where do you look, or what do you do, that indicates the playlists are in alphabetical order?  Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
    If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe. 
    The 3rd gen shuffle uses VoiceOver.  If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details).  When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
    There are more details in the manual for the 3rd gen shuffle, which is online here
    http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    See page 22 for the section about setting up and using VoiceOver.  The part about switching playlists starts on page 23 (Using the Playlist Menu).

  • I am having problems with my macbook pro and the dock.  About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor.  But the computer locks up.

    I am having problems with my macbook pro and the dock.  About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor.  But the computer locks up.

    Do you have Parallels installed by any chance?  There is a known problem that causes symptoms similar to this.  You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels.  An update corrects the problem:
    http://kb.parallels.com/111541

  • Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

    Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

    Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • Problems with Cocoon 2.03 and Weblogic 6.1 SP3

    I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try to deploy
    the cocoon.war.
    Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
    (after I changed cocoon.xconf to use the following transformer factory: org.apache.xalan.processor.TransformerFactoryImpl).
    However, when I deploy the cocoon.war through the weblogic console and try to
    invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
    ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread: '7' for
    queue: 'default'/Handler: Error compiling sitemap
    java.util.zip.ZipException: The system cannot find the file specified
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:110)
         at java.util.zip.ZipFile.<init>(ZipFile.java:125)
         at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
         at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
         at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
         at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
         at java.lang.Thread.run(Thread.java:484)
    I understood that there were problems when the cocoon.war file that did occur
    when you unpacked the war, but I believed that these problems did not occur with
    WLS6.1 SP3.
    Has anyone else encountered this problem and solved it? Any help would be greatly
    appreciated.
    Thanks in advance.
    Paul

    This how I got Cocoon 2.04 up and running on WLS 6.1.4
    Download the Cocoon source from http://xml.apache.org/cocoon/dist/
    Remove all but the following JARs from lib/optional:
    commons-jxpath-1.0.jar
    jing-20020724.jar
    resolver-20020130.jar
    servlet_2_2.jar
    commons-logging-1.0.jar
    jtidy-04aug2000r7-dev.jar
    rhino-1.5r3.jar
    xt-19991105.jar
    Update lib/jars.xml to reflect these changes
    Issue build commands:
    ./build.sh clean (Note: Always clean first!)
    ./build.sh -Dinclude.webapp.libs=yes -Dexclude.webapp.samples=yes -Dexclude.webapp.documenation=yes
    -Dexclude.webapp.javadocs=yes webapp
    Copy the following JARs to your WLS instance’s lib directory:
    xercesImpl-2.0.0.jar
    xml-apis.jar
    xalan-2.3.1.jar
    xt-19991105.jar
    java/lib/tools.jar
    Sample of config/SERVER_NAME.setenv
    LIB=/path/to/lib
    JARS=$LIB/xercesImpl-2.0.0.jar:$LIB/xml-apis.jar:$LIB/xalan-2.3.1.jar:$LIB/xt-19991105.jar:/opt/java1.3/lib/tools.jar
    JAVACLASSPATH=$JARS:.:$JAVACLASSPATH
    JAVA_HOME=/opt/java1.3
    Deploy the resluting cocoon.war and you should have a Cocoon up and running that
    can do the XML->HTML Hello World sample. The status page works fine too.
    My advice is to launch this stripped configuration first and if needed add more
    features later by adding the JARs of your choice to the class path (or add the
    to your webapp-build if you are confident that WLS are capable of handling their
    manifests).
    Good luck
    /Peter
    "Paul Petley" <[email protected]> wrote:
    >
    >
    I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try
    to deploy
    the cocoon.war.
    Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
    (after I changed cocoon.xconf to use the following transformer factory:
    org.apache.xalan.processor.TransformerFactoryImpl).
    However, when I deploy the cocoon.war through the weblogic console and
    try to
    invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
    ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread:
    '7' for
    queue: 'default'/Handler: Error compiling sitemap
    java.util.zip.ZipException: The system cannot find the file specified
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:110)
         at java.util.zip.ZipFile.<init>(ZipFile.java:125)
         at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
         at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
         at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
         at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
         at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
         at java.lang.Thread.run(Thread.java:484)
    I understood that there were problems when the cocoon.war file that did
    occur
    when you unpacked the war, but I believed that these problems did not
    occur with
    WLS6.1 SP3.
    Has anyone else encountered this problem and solved it? Any help would
    be greatly
    appreciated.
    Thanks in advance.
    Paul

  • Hallo Apple, what does it mean this Message0x7fff7500b300 resumeBackgroundConversion: background conversion started/resumed for lv 82832E6C-B6AC-46A6-8836-715414EBE8F4. Because I have a Problem with my CPU: Kernel_task and corestoraged

    Hallo Apple,
    what does it mean this Message0x7fff7500b300 resumeBackgroundConversion: background conversion started/resumed for lv 82832E6C-B6AC-46A6-8836-715414EBE8F4.
    Because I have a Problem with my CPU: Kernel_task and corestoraged.

    I'm having this same issue. I also have this line in my log, which is curious:
    12/14/14 7:13:07.822 PM netbiosd[16766]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
    Is this related to the problem? What does it mean?
    My 2010 27" iMac running Yosemite won't wake up from sleep.

  • Problems with weblogic clustering in 6.1 sp3

    We have spent a lot of time trying to get our application deployed to
              a cluster using weblogic 6.1 sp3 and we consistently receive a failure
              when we attempt to start the managed server. This was not a problem
              with weblogic sp1--we got our application to deploy to the cluster
              successfully; although there was another weblogic bug there with
              clients accessing EJB clusters--we won't go into that here...
              We have tried this on both a Windows 2000 machine and an HP machine
              running weblogic sp3. The same error occurs on both platforms.
              The error in deploying our application to the cluster against weblogic
              sp3 looks to have to do with our custom security realm. Inside our
              custom realm we make use of a configurable providerUrl which we set to
              the cluster address/port. The custom realm makes a call where it
              passes in the providerUrl to:
                   weblogic.management.Helper.getMBeanHome(..., providerUrl,...)
              When we have our providerUrl set to the cluster address/port--e.g.,
                   t3://clustermember1:7001
              and attempt to start the managed server we get the error:
              Starting WebLogic Server ....
              Connecting to http://adminserver:7117...
              The WebLogic Server did not start up properly.
              Exception raised:
              weblogic.management.configuration.ConfigurationException:
              clustermember1 not found
                   at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:1084)
                   at weblogic.management.Admin.initialize(Admin.java:340)
                   at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
                   at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
                   at weblogic.Server.main(Server.java:35)
              Reason: Fatal initialization exception
              When we have our providerUrl set to the admin server address--e.g.,
                   t3://adminserver:7117
              everything starts up fine.
              Does anyone know why this would work on sp1 and not sp3 of weblogic
              6.1?
              We verified that all passwords are correct and everything else we
              could determine--any ideas would be helpful.
              We don't want the providerUrl to point at our admin server, we want it
              to point at the cluster address/port.
              When we get the managed server error, we received this error on the
              AdminServer:
              2002-08-15 16:52:23,019 ERROR [ExecuteThread: '11' for queue:
              'default'] (com.msa.gabriel.share.security.wlrealm.GabrielRealm) -
              Caught naming exception null; throwing RuntimeException.
              javax.naming.CommunicationException. Root exception is
              java.net.ConnectException: t3://tomtate.msais.com:7119: Destination
              unreachable; nested exception is:
                   java.net.ConnectException: Connection refused; No available router to
              destination
                   at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:155)
                   at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
                   at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:307)
                   at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:211)
                   at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:149)
                   at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:665)
                   at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
                   at javax.naming.InitialContext.init(InitialContext.java:222)
                   at javax.naming.InitialContext.<init>(InitialContext.java:198)
                   at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getNamingContext(GabrielRealm.java:416)
                   at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getConnection(GabrielRealm.java:347)
                   at com.msa.gabriel.share.security.wlrealm.GabrielRealm.access$000(GabrielRealm.java:51)
                   at com.msa.gabriel.share.security.wlrealm.GabrielRealm$2.run(GabrielRealm.java:225)
                   at weblogic.security.acl.Security.doAsPrivileged(Security.java:489)
                   at com.msa.gabriel.share.security.wlrealm.GabrielRealm.myDoAsPrivileged(GabrielRealm.java:578)
                   at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.java:221)
                   at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
                   at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
                   at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
                   at weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.java:356)
                   at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:205)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2518)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2260)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              <Aug 15, 2002 4:52:23 PM EDT> <Error> <HTTP>
              <[WebAppServletContext(8091823,wl_management_internal2,/wl_management_internal2)]
              Servlet failed with Exception
              java.lang.RuntimeException
                   at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.java:260)
                   at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
                   at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
                   at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
                   at weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.java:356)
                   at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:205)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2518)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2260)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              Thanks for any help.
              Rich
              

    Bottom line:
              In our custom realm we were not handling user guest correctly. Even if you
              have guest user disabled, Weblogic seems to have hard-coded guest to
              send messages to the cluster every-so-often. Not sure there--couldn't get
              an answer out of bea as to exactly why we see guest still being used...
              It seems that with sp3, the user guest interaction started happening earlier
              than it did with sp1, consequently making our realm code fail when trying to
              retrieve the guest user like someone we knew about in our system.
              Hence, our getUser and authUserPassword methods now return null for both
              users guest and system, making the secondary realm (file realm) be used to
              authenticate and resolve guest & system. BEA helped get our code fixed;
              however, we still don't have a lot of depth in understanding Weblogic
              server's use of guest...
              Apparently, in 7.x the guest & system user behavior and configuration is
              different also... We'll see when we start digging into that migration.
              Rich
              [email protected] (Rich Koch) wrote in message news:<[email protected]>...
              > Thanks for the responses--we're working with weblogic support now. We
              > think that the custom realm that we have [the developer that wrote it
              > left the company] is the problem.
              >
              > The original developer was told by someone to check:
              > weblogic.security.acl.internal.ClusterRealm.THE_ONE != null
              >
              > In order to determine if the JNDI was available/ready for the whole
              > cluster.
              >
              > It seems that the meaning/setting of THE_ONE changed with this respect
              > from
              > sp1 to sp3--i.e., this is no longer a valid test to tell us if the
              > JNDI is
              > ready for the cluster.
              >
              > We believe this was used because the 'system' user has to be
              > authenticated before the custom realm is up. Originally, before this
              > check was in place, an exception was received when authenticating
              > 'system'. This appears to be a weblogic limitation/issue. Support
              > has told us that this is different in weblogic 7.0. Unfortunately, we
              > can't upgrade from 6.1 yet.
              >
              > We'll post the solution when this gets figured out.
              >
              > Rak
              >
              > "Sabha" <[email protected]> wrote in message news:<[email protected]>...
              > > There was a security restriction enforced from sp2/sp3 onwards in terms of
              > > looking up mbeans from admin server.
              > >
              > > This might cause things to fail if you are attempting to lookup Mbeans with
              > > guest priviliges from admin server. Also, can you try doing the following:
              > >
              > > Run " java weblogic.Admin -url adminServer -username system -password
              > > .... -GET -pretty -type Server" and check whether the named clustermember1
              > > is available in the list or not.
              > >
              > > Also you seem to be getting some security exception - can you check that.
              > >
              > > t3://tomtate.msais.com:7119: Destination
              > > unreachable; nested exception is:
              > >
              > > --- Try running weblogic.Admin PING on this one and see whether you are
              > > able to reach this server upon the error message.
              > >
              > > --Sabha
              > >
              > > "Rich Koch" <[email protected]> wrote in message
              > > news:[email protected]...
              > > > We have spent a lot of time trying to get our application deployed to
              > > > a cluster using weblogic 6.1 sp3 and we consistently receive a failure
              > > > when we attempt to start the managed server. This was not a problem
              > > > with weblogic sp1--we got our application to deploy to the cluster
              > > > successfully; although there was another weblogic bug there with
              > > > clients accessing EJB clusters--we won't go into that here...
              > > >
              > > > We have tried this on both a Windows 2000 machine and an HP machine
              > > > running weblogic sp3. The same error occurs on both platforms.
              > > >
              > > > The error in deploying our application to the cluster against weblogic
              > > > sp3 looks to have to do with our custom security realm. Inside our
              > > > custom realm we make use of a configurable providerUrl which we set to
              > > > the cluster address/port. The custom realm makes a call where it
              > > > passes in the providerUrl to:
              > > > weblogic.management.Helper.getMBeanHome(..., providerUrl,...)
              > > >
              > > > When we have our providerUrl set to the cluster address/port--e.g.,
              > > > t3://clustermember1:7001
              > > >
              > > > and attempt to start the managed server we get the error:
              > > >
              > > > Starting WebLogic Server ....
              > > > Connecting to http://adminserver:7117...
              > > >
              > ***************************************************************************
              > > > The WebLogic Server did not start up properly.
              > > > Exception raised:
              > > > weblogic.management.configuration.ConfigurationException:
              > > > clustermember1 not found
              > > > at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:1084)
              > > > at weblogic.management.Admin.initialize(Admin.java:340)
              > > > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
              > > > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
              > > > at weblogic.Server.main(Server.java:35)
              > > > Reason: Fatal initialization exception
              > > >
              > ***************************************************************************
              > > >
              > > > When we have our providerUrl set to the admin server address--e.g.,
              > > > t3://adminserver:7117
              > > >
              > > > everything starts up fine.
              > > >
              > > > Does anyone know why this would work on sp1 and not sp3 of weblogic
              > > > 6.1?
              > > > We verified that all passwords are correct and everything else we
              > > > could determine--any ideas would be helpful.
              > > >
              > > > We don't want the providerUrl to point at our admin server, we want it
              > > > to point at the cluster address/port.
              > > >
              > > > When we get the managed server error, we received this error on the
              > > > AdminServer:
              > > >
              > > > 2002-08-15 16:52:23,019 ERROR [ExecuteThread: '11' for queue:
              > > > 'default'] (com.msa.gabriel.share.security.wlrealm.GabrielRealm) -
              > > > Caught naming exception null; throwing RuntimeException.
              > > > javax.naming.CommunicationException. Root exception is
              > > > java.net.ConnectException: t3://tomtate.msais.com:7119: Destination
              > > > unreachable; nested exception is:
              > > > java.net.ConnectException: Connection refused; No available router to
              > > > destination
              > > > at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:155)
              > > > at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
              > > > at
              > > weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
              > > textFactoryDelegate.java:307)
              > > > at
              > > weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
              > > textFactoryDelegate.java:211)
              > > > at
              > > weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
              > > ory.java:149)
              > > > at
              > javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:665)
              > > > at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
              > > > at javax.naming.InitialContext.init(InitialContext.java:222)
              > > > at javax.naming.InitialContext.<init>(InitialContext.java:198)
              > > > at
              > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getNamingContext(Gabriel
              > > Realm.java:416)
              > > > at
              > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getConnection(GabrielRea
              > > lm.java:347)
              > > > at
              > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.access$000(GabrielRealm.
              > > java:51)
              > > > at
              > > com.msa.gabriel.share.security.wlrealm.GabrielRealm$2.run(GabrielRealm.java:
              > > 225)
              > > > at weblogic.security.acl.Security.doAsPrivileged(Security.java:489)
              > > > at
              > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.myDoAsPrivileged(Gabriel
              > > Realm.java:578)
              > > > at
              > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.jav
              > > a:221)
              > > > at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
              > > > at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
              > > > at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
              > > > at
              > > weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.j
              > > ava:356)
              > > > at
              > > weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(Servle
              > > tSecurityManager.java:205)
              > > > at
              > > weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
              > > ntext.java:2518)
              > > > at
              > weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
              > > :2260)
              > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              > > > <Aug 15, 2002 4:52:23 PM EDT> <Error> <HTTP>
              > > >
              > > <[WebAppServletContext(8091823,wl_management_internal2,/wl_management_intern
              > > al2)]
              > > > Servlet failed with Exception
              > > > java.lang.RuntimeException
              > > > at
              > > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.jav
              > > a:260)
              > > > at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
              > > > at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
              > > > at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
              > > > at
              > > weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.j
              > > ava:356)
              > > > at
              > > weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(Servle
              > > tSecurityManager.java:205)
              > > > at
              > > weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
              > > ntext.java:2518)
              > > > at
              > weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
              > > :2260)
              > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              > > >
              > > >
              > > > Thanks for any help.
              > > >
              > > > Rich
              

  • Problem with weblogic.Deployer in 8.1

    I have a problem with weblogic.Deployer. My application deploys and works fine
    if I manually copy the ear or the exploded form into weblogic's applications\
    directory (hot deployment). But, if I use the weblogic.Deployer tool, it fails
    with the following exception. Does the deployer tool expect something in the ear
    (or exploded form) that I'm missing? Thanks in advance.
    -Vas
    [wldeploy] java.lang.NullPointerException
    [wldeploy] at weblogic.rmi.internal.StubGenerator.getStubOnClient(StubGener
    ator.java:785)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.getStubClass(StubGenerato
    r.java:758)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:803)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:790)
    [wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
    79)
    [wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
    rviceStub.java:50)
    [wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
    .java:152)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
    otely(WLInitialContextFactoryDelegate.java:597)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
    nitialContextFactoryDelegate.java:534)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
    itialContextFactoryDelegate.java:336)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
    xt(WLInitialContextFactoryDelegate.java:308)
    [wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
    [wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
    143)
    [wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
    BeanHomeTool.java:157)
    [wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
    [wldeploy] at weblogic.Deployer.main(Deployer.java:399)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
    sorImpl.java:39)
    [wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
    hodAccessorImpl.java:25)
    [wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
    .java:209)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
    va:170)
    [wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
    va:166)
    [wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
    [wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
    [wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
    [wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    [wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
    [wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
    [wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
    [wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
    [wldeploy] --------------- nested within: ------------------
    [wldeploy] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Failed
    to generate class for weblogic.common.internal.RMIBootServiceImpl_811_WLStub ]
    with nested exception:
    [wldeploy] [java.lang.NullPointerException]
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:807)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:790)
    [wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
    79)
    [wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
    rviceStub.java:50)
    [wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
    .java:152)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
    otely(WLInitialContextFactoryDelegate.java:597)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
    nitialContextFactoryDelegate.java:534)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
    itialContextFactoryDelegate.java:336)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
    xt(WLInitialContextFactoryDelegate.java:308)
    [wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
    [wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
    143)
    [wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
    BeanHomeTool.java:157)
    [wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
    [wldeploy] at weblogic.Deployer.main(Deployer.java:399)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
    sorImpl.java:39)
    [wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
    hodAccessorImpl.java:25)
    [wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
    .java:209)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
    va:170)
    [wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
    va:166)
    [wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
    [wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
    [wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
    [wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    [wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
    [wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
    [wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
    [wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
    [wldeploy] java.lang.reflect.InvocationTargetException
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
    sorImpl.java:39)
    [wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
    hodAccessorImpl.java:25)
    [wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
    .java:209)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
    va:170)
    [wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
    va:166)
    [wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
    [wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
    [wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
    [wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    [wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
    [wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
    [wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
    [wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
    [wldeploy] Caused by: weblogic.utils.AssertionError: ***** ASSERTION FAILED ***
    **[ Failed to generate class for weblogic.common.internal.RMIBootServiceImpl_811
    _WLStub ] - with nested exception:
    [wldeploy] [java.lang.NullPointerException]
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:807)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:790)
    [wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
    79)
    [wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
    rviceStub.java:50)
    [wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
    .java:152)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
    otely(WLInitialContextFactoryDelegate.java:597)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
    nitialContextFactoryDelegate.java:534)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
    itialContextFactoryDelegate.java:336)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
    xt(WLInitialContextFactoryDelegate.java:308)
    [wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
    [wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
    143)
    [wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
    BeanHomeTool.java:157)
    [wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
    [wldeploy] at weblogic.Deployer.main(Deployer.java:399)
    [wldeploy] ... 15 more

    Hi Deepak,
    I didn't understand the suggested resolution. Can you tell me what it means?
    However, I found a similar problem in the archives, so I tried from command line
    (outside ant) using "java weblogic.Delployer ...." and it worked! It doesn't work
    from ant. So, you think there's some conflict between my ant and weblogic's ant
    task "WLDdeploy"?
    Thanks,
    Vas
    "Deepak Vohra" <[email protected]> wrote:
    >
    Refer to
    http://e-docs.bea.com/wls/docs70/notes/resolved.html#1296363
    "vas pulipati" <[email protected]> wrote:
    I have a problem with weblogic.Deployer. My application deploys andworks
    fine
    if I manually copy the ear or the exploded form into weblogic's applications\
    directory (hot deployment). But, if I use the weblogic.Deployer tool,
    it fails
    with the following exception. Does the deployer tool expect something
    in the ear
    (or exploded form) that I'm missing? Thanks in advance.
    -Vas
    [wldeploy] java.lang.NullPointerException
    [wldeploy] at weblogic.rmi.internal.StubGenerator.getStubOnClient(StubGener
    ator.java:785)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.getStubClass(StubGenerato
    r.java:758)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:803)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:790)
    [wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
    79)
    [wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
    rviceStub.java:50)
    [wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
    .java:152)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
    otely(WLInitialContextFactoryDelegate.java:597)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
    nitialContextFactoryDelegate.java:534)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
    itialContextFactoryDelegate.java:336)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
    xt(WLInitialContextFactoryDelegate.java:308)
    [wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
    [wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
    143)
    [wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
    BeanHomeTool.java:157)
    [wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
    [wldeploy] at weblogic.Deployer.main(Deployer.java:399)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
    Method)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
    sorImpl.java:39)
    [wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
    hodAccessorImpl.java:25)
    [wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
    .java:209)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
    va:170)
    [wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
    va:166)
    [wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
    [wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
    [wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
    [wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    [wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
    [wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
    [wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
    [wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
    [wldeploy] --------------- nested within: ------------------
    [wldeploy] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[
    Failed
    to generate class for weblogic.common.internal.RMIBootServiceImpl_811_WLStub
    with nested exception:
    [wldeploy] [java.lang.NullPointerException]
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:807)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:790)
    [wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
    79)
    [wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
    rviceStub.java:50)
    [wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
    .java:152)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
    otely(WLInitialContextFactoryDelegate.java:597)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
    nitialContextFactoryDelegate.java:534)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
    itialContextFactoryDelegate.java:336)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
    xt(WLInitialContextFactoryDelegate.java:308)
    [wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
    [wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
    143)
    [wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
    BeanHomeTool.java:157)
    [wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
    [wldeploy] at weblogic.Deployer.main(Deployer.java:399)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
    Method)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
    sorImpl.java:39)
    [wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
    hodAccessorImpl.java:25)
    [wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
    .java:209)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
    va:170)
    [wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
    va:166)
    [wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
    [wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
    [wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
    [wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    [wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
    [wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
    [wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
    [wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
    [wldeploy] java.lang.reflect.InvocationTargetException
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
    Method)
    [wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
    sorImpl.java:39)
    [wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
    hodAccessorImpl.java:25)
    [wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
    .java:209)
    [wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
    va:170)
    [wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
    va:166)
    [wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
    [wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
    [wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
    [wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
    [wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
    [wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
    [wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
    [wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
    [wldeploy] Caused by: weblogic.utils.AssertionError: ***** ASSERTION
    FAILED ***
    **[ Failed to generate class for weblogic.common.internal.RMIBootServiceImpl_811
    _WLStub ] - with nested exception:
    [wldeploy] [java.lang.NullPointerException]
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:807)
    [wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
    r.java:790)
    [wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
    79)
    [wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
    rviceStub.java:50)
    [wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
    .java:152)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
    otely(WLInitialContextFactoryDelegate.java:597)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
    nitialContextFactoryDelegate.java:534)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
    itialContextFactoryDelegate.java:336)
    [wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
    xt(WLInitialContextFactoryDelegate.java:308)
    [wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
    [wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
    143)
    [wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
    BeanHomeTool.java:157)
    [wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
    [wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
    [wldeploy] at weblogic.Deployer.main(Deployer.java:399)
    [wldeploy] ... 15 more

  • Wireless printing problems with 10.5.4 and Epson printers

    Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
    At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
    Thanks
    Paul
    MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printer

    I have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.

  • Problem with java swing button and loop

    Problem with java swing button and loop
    I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
    I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
    When I click on start button it must do next:
    Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
    And when I click on stop button it must do next:
    Start button must set enabled and selected and Stop button must set disenabled.
    Field status is set to 0.
    This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
    There is java code, so you can get better picture:
    /** start button */
    public void gStart_ActionEvents() {
    try {
    ivjGStart.setEnabled(false);
    ivjGStop.setEnabled(true);
    ivjGStop.setSelected(true);
    getJTextPane1().setText("Program is running ...");
    Status = 1;
    } catch (Exception e) {}
    /** stop button */
    public void gStop_ActionEvents() {
    try {
    ivjGStart.setEnabled(true);
    ivjGStart.setSelected(true);
    ivjGStop.setEnabled(false);
    getJTextPane1().setText("Program is NOT running ...");
    Status = 0;
    } catch (Exception e) {
    /** procedure IzvajajNeprekinjeno() */
    public void IzvajajNeprekinjeno() {  //RunLoop
    try {
    int zamik = 2000; //delay
    do {
    Thread.sleep(zamik);
    PreberiDat(); //procedure
    } while (Status == 1);
    } catch (Exception e) {
    So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
    Any help will be appreciated.
    Best regards,
    Tomi

    This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
    Since java is task-based this will happen if you do like this:
    1. Button "Start" is pressed. Thread running: GUI_Thread
    2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
    3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
    4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
    5. Call PreberiDat(). Thread running: GUI_Thread
    6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
    Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
    What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
    http://java.sun.com/docs/books/tutorial/uiswing/index.html
    This tutorial explains how to build a multi threaded gui.
    /Lime

Maybe you are looking for

  • Black screen w/blinking cursor hp dv6700 please help me out someone!!

    My dv6700 running vista 32 bit has shut down on me and when i try to start it I get the first HP screen and then get stuck on a black screen with blinking cursor.....so i can't get to the next screen to press F8.....I went to this page to download is

  • How to pass presentation varibale as a paramater in Action Link

    Is it possible to pass presentation variable as a parameter to 'Navigate to Web page' Action Link?

  • JMS Listener within a workflow

    I have a JMS listener, waiting for new messages on a queue. Once there is a new message it uses that message which contains an object to begin the work flow process. The first step in the work flow calls an external engine we built that does quite a

  • Zooming Thumbnails using Actionscript

    I am a novice user and was wondering if anyone could help me. I am using Flash in Slide Show format. I have text on one side of the screen and images on the other. I would like to have the ability to click the images while on the slide and have them

  • Uploading logo to SAP Script

    Hi, Can you please let me know the steps to upload the logo and to call it from SAP Script. I have the logo in the Word Document. Thanks in advance, Ishaq.