Problem with website name and hyperlinks

searching for the website name and clicking on it on google or simply typing it into the web search bar, it loads without a problems. the website is on the internet. However, when I hyperlink/send the name of the website to someone via email to announce it, the hyperlink doesn't work, it simply opens up an external page to whatever wi-fi server you are using and says it cannot find the page... whatever the website name is. why does the internet fail to load this site as a hyperlink via email but works fine on google or by typing it into the search bar?

the website name is www.ashingdonunitedfreechurch.org.uk.
typing it in the search bar of the browser or clicking on the link on google works, however when I send this via email to someone to show them the site, it doesn't load. depending on the wi-fi server, I use talktalk, a different window will appear from the wi-fi server saying it cant find that website, although of course it does exist.

Similar Messages

Problems with User names and Password

For some reason iWeb does not want to accept my user name and password: I enter it in the programm, update the whole website (which by the way didn´t occur incrementally), and then when I try to call up the page it won´t let me in - instead I have to give in the password and the user name over and over again with the result of the page being loaded just a "little" bit more each time but nothing happening!
Please help!
<Edited by Moderator>

David ~ You're posting in this 'Web '08 forum so this Apple doc about iWeb 1.x may not apply: _Password-protected sites don't publish to .Mac_.
For iWeb '08, passwords are case-sensitive and must use between 6 and 20 characters. They can include any combination of letters, numbers, and symbols, but can’t include spaces.
Post back confirming that you're using iWeb '08 and MobileMe — if you don’t publish your site to MobileMe password protection is unavailable.

New bookmark window not filled with website name and location

I just set up a new computer with firefox and imported my bookmarks. I noticed when I go to make a new bookmark the fields aren't filled in for the name and location fields as they are on my other installations of filrefox. I wondered why,and what I can do to fix it?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problems with itunes 8 and ipod shuffle gen 2.

Problems with itunes 8 and ipod shuffle gen 2.
I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
When i try to drag songs directly on it, itunes says i can't
I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
Computer Specs
Windows XP SP3
384MB of Ram (works really good)
USB 1.1 connection
Pentium 4 clocked at 1.285 GHZ
IPOD Shuffle Specs
2nd Generation
1GB (964MB)
Version 1.0.4
unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
Itunes Specs:
Version 8.1.1.10

This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

Problem with variable name in ZXRSRTOP include (virtual KF)

Hi all,
I am coding a routine to use a virtual key figure in the BEx.
I have just a little problem with the name of a variable:
as explained in the documentation, I created the variable with the prefix G_POS_, the name of the infocube and the name of the infoobject all together:
DATA: G_POS_BC_ST_003_C_DIV__C_COMPAR type i.
The problem is that this variable name is longer than 30 characters, so the system doesn't accept it.
Is there a workaround, other than changing the name of the infoobject (which is a navigational attribute)?
Any help would be appreciated.
Loï

Hello Marc,
I understand that I have to use a concatenate function and a dynamic call of the variable with (variable) instruction, but i do not understand how to implement it.
the infocube name is BC_ST_003
the characterisdtic name is C_DIV__COMPAR
So, in the include ZXRSRTOP the statement
DATA : G_POS_BC_ST_003_C_DIV__COMPAR
does not work due a length problem (see first post)
But in the same include the statement
+DATA: l_global_name type c.
concatenate 'GPOS' 'BC_ST_003' 'C_DIV__C_COMPAR' into l_global_name separated by '_'.+
drives to the following error : statement is not accessible.
Could u please provide me with an example of the code in the include ZXRSRTOP, and in the include ZXRSRZZZ for the use of this variable.
Thanks in advance.
Loï

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

"File with specified name and version number already exists. Result code= -48." ...????

Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48." WHAT IS THE PROBLEM?????? It's making me furious!

Hi
As the message says, there is a file at the recording directory that has the same name:
http://support.apple.com/kb/ht1618
Try changing the name of the track (this sets the filename in later versions of Logic 9
CCT

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Problem with reserved names

hi everyboody
i have a problem with reserved names
i have a table t
drop table t;
create table t
t_id int,
"DATE" date
then i insert it
insert into t values(1,'15.04.10');
insert into t values(2,'16.04.10');
select * from t;
it'sw work correct
T_ID DATE
1 15.04.10
2 16.04.10
but when i try to create procedure for insert, like this
create or replace procedure my_proc(p1 int,p2 date)
as begin
insert into t values(p1,p2);
end;
i receive error message
i know that the problem is with the name of the second column called "DATE"
and if we changed this name (for example "tDATE") the procedure will be work
but i can't change this name
if anybody knows the solution please help me

Karthik:
No, it is not a bug, it is just the way that Oracle works. The list of reserved words can be found in the view v$reserved_words. There is a column in that view called reserved. A word that is in the view and has Y in the reserved column is "really" reserved, that is you will get an error if you use it in an inappropriate place (like a column name) without quoting it. Words with N in the reserved column should not be used as object names, but because they either became special later in Oracle history or for other reasons can be used unquoted but shouldn't be.
Although I don't know the exact internal mechanism, from experience, it appears to work this way. When Oracle stores the name of a table or column, it always makes it upper case, unless it is double quoted in which case the case is preserved. When it retireves the names, it does not make any changes to the name as it is stored, so always retieves the name as it was stored.
In the OP's case, by using double quotes he got around the reserved word issue, but by using all upper case within the double quotes what ended up stored in the data dictionary was a reserved word. The sql statement probably worked in sql because it is just doing a string match to see if the specified column names are right, and in the absence of a column list, may even be just looking to see if the type and number is correct without actually looking at the name. I suspect this because it works even if you explicitly list the columns as long as DATE is double quoted.
SQL> INSERT INTO t (id, "DATE") VALUES (1, sysdate);
1 row created.
SQL> roll
Rollback complete.However, if you do not double quote the column, you get:
SQL> INSERT INTO t (id, DATE) VALUES (1, sysdate);
INSERT INTO t (id, DATE) VALUES (1, sysdate)
ERROR at line 1:
ORA-01747: invalid user.table.column, table.column, or column specificationIn the case of the PL/SQL, my quess would be that the compiler is retrieving the column names form the data dictionary, then barfing on something similar to the ORA-1747 error above in the compilation process.
John

Problem with song names

Hey, I'm having this problem with song names. For example, instead of the song title being "Song Title" it will be like "Artist Name - Song Title". It's like this for half my files. I'm trying to organize my music files and every time I fix it, it keeps going back.
This has happened to me before and usually if I double click it, it will automatically change. This time, nothing seems to work except doing it manually ("Get Info)" and that would take too long since I have 7,000 files like this. I posted this on another board and somebody said to right click the songs and click Update ID3 v2.4 which originally worked, but now nothing but manually doing it works.
This is like this when I open it for other programs, but I know iTunes caused. I think it has something to do with the "Keep my iTunes Folder Organized" check because iTunes renames the file. I also tried reinstalling itunes and readding my files.
Thanks for any help!

I don't completely understand what you are trying to say, but iTunes doesn't automatically change your tag information.
iTunes stores a copy of the tag information in the library database. When you play a track, iTunes re-reads the tag information from the song file and updates the library data. This produces the efferct that iTunes appears to change tag information but it isn't, it is meerly reflecting a change that already happend.
Do you have any other software on your PC that can automatically change tag information? For example Windows Media player can do it if you select an option to retrieve data from the internet and overwrite existing info. But other software may do it too.
If you want to force iTunes to re-read all tags, go to your Music view and go to Edit>>Select All. Then right click in the selection and choose Get Info. Don't change anything, just exit by clicking OK. iTunes will update the library with the tag information from the song files.

No event method with matching name and signature found on EventSet

Dear,
I have this error in the Problems view in Workshop (I'm using the Weblogic 9.2.1) :
No event method with matching name and signature found on EventSet: com.bea.control.TaskControl.Callback.
This error occurs sometimes when I put an event on a task in a process definition. Example, I have a process : Application.java, when I put the onReceptionCompleted control (receive) in my process, the error appears!
Thanks for your help,
Regards,
Mathieu

It is a problem with the drap & drop in Workshop (from the taskControl to the Process). Workshop automatically inserts a wrong eventSet instead of the good one from the generated task control !
See you,
Mathieu

Serious problem with base station and/or computer internet connection

Hi,
my powerbook does not detect my base station (another computer at home does, so the base station seems to be working) but it does detect other networks.
I have allready tried to reset the basse station (many times) but it doesen't help. Have tried to re-configure in Airport Admin Utility there is no base station (I cannot push configure) - when I push "Other" - it does not accept the base station password (have also tried "public" as they suggest in "help").
The same thing happens in Airport Setup Assistant: it does not detect my base station. It has happened before that the base station "disapears" and I could fix it now it seems to be unfixable. Can anyone out there help me???

Agnes,
the one computer connects wirelessly to the base
station and
works alright? Also the Mac can connect to the
base
station with ethernet and works alright?
Yes, thats correct
Then you should be able to access the base station two ways, from the Mac via ethernet or from the pc. I am assuming that your "pc at home" is a pc running windows (if the 2nd computer is also a Mac it would be even better).
Anyway, you can administer the base station from the dark side, you may want to check out the following:
AirPort 4.2 for Windows
http://www.apple.com/support/downloads/airport42forwindows.html
Check also:
XP users need to have WZC installed to administer:
http://docs.info.apple.com/article.html?artnum=108049
If you haven't upgraded your pc to XP Service Pack 2.
As far as running the admin utility from the Mac, connect to the base via ethernet. You have indicated that you can do that and get to the internet, therefore you should be able to see the base station with the admin utility. If you are seeing your neigbor's that is wirelessly. But the wired connection Mac->Ethernet->Base-LAN-Port should allow the base to show up with a Name and an IP Adress.
Once in the admin utility for the base station (either by pc wirelessly or by Mac via ethernet) you can then make changes. You should be able to see the Base Station Name and the Airport network name. You can then change the channel: 1, 4, 7, 11 (try three apart from each other). Is your base set up to configure TCP/IP using ethernet, configure using DHCP (select the Internet tab at the top to get to this page)? On the Network tab page, is the base configured to Distribute IP addresses, Sharing a single IP address using DHCP and NAT?
As far as your Mac's System Network Preferences, you are not selected to Connect using PPoE are you? Are you set to "Automatically join an open network"? Are you configured for Using DHCP? To join a specific network (your airport network name and password)?
By the way, if RF interference is a possible problem, you can check out:
AirPort: Potential sources of interference
http://docs.info.apple.com/article.html?artnum=58543
Gino
-

Problem with sync video and audio

Hi
Problem with sync video and audio
1- capture video ( Telecinema dv pal)
2- conform 25 to 24
3- import timeline audio and video
4- sync
5- Link
6- make sub-clip
7- new name
---- error
Sequence Error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence.
FINAL CUT PRO IS DONE.
HELP ME.
THX

exactly why are you converting 25 to 24?

Problems with games server and client

Hi! I am making an MMORPG game and I have problems with the server and client connection.
I can connect to the server, but when a second player does, the server console tells me this:
java.net.SocketException: Connection reset
After that, all clients disconnect.
Which is the problem?
How can I solve it?
Thank you so much

Here is how my sever work. I took some of this code from a book called Killer Programming Games in Java. If you google for it, you will find it for sure.
TourGroup tg = new TourGroup(); // this object stores information about all clients connected to the server
    try {
      ServerSocket serverSock = new ServerSocket(PORT);
      Socket clientSock;
      while (true) {
        System.out.println("Waiting for a client...");
        clientSock = serverSock.accept();
        new TourServerHandler(clientSock, tg).start(); // this is the thread that monitors each client
    catch(Exception e)
    { System.out.println(e); }
} This is some code of TourServerHandler
public TourServerHandler(Socket s, TourGroup tg)
    this.tg = tg;
    clientSock = s;
    name= "?";
    cliAddr = clientSock.getInetAddress().getHostAddress();
    port = clientSock.getPort();
    System.out.println("Client connection from (" +
                 cliAddr + ", " + port + ")");
public void run()
// process messages from the client
    try {
      // Get I/O streams from the socket
      BufferedReader in = new BufferedReader(
   new InputStreamReader( clientSock.getInputStream() ) );
      PrintWriter out =
new PrintWriter( clientSock.getOutputStream(), true );
// and here goes the rest... The TourServerHandler thread uses this code to send messages:
tg.broadcast(msg); tg.broadcast works like this:
synchronized public void broadcast(String cliAddr, int port, String msg)
// broadcast to everyone but original msg sender
    TouristInfo c; // this object stores info about the client
    for(int i=0; i < tourPeople.size(); i++) {
      c = (TouristInfo) tourPeople.get(i);
        c.sendMessage(msg);
} This is the error part
public void sendMessage(String msg)
PrintWriter out;
    out.println(msg);
      System.out.println("OK");
} I can't find any error but I still get that Connection reset exception...

Problem with website name and hyperlinks

Similar Messages

Maybe you are looking for