Problem With Widescreen Export

Hey everyone. I know that there's been a lot of topics posted about this and I have read every single one and still can't seem to get it right. So here's the deal...
I recorded 16:9 footage on my Canon ZR800.
I captured with Anamorphic 16:9 settings.
The sequence preset is Anamorphic.
When I export it's 4:3.
I tried changing the pixels to Square like someone suggested. It seemed like it would work, but it didn't change anything, it actually just created a 4:3 frame with black bars on the left and right making it.....Tallscreen, if you know what I mean.
Is there anyway to get 16:9 footage from FCP to a QuickTime file? I'm not worried about putting it on a DVD right now, so I don't want to letterbox it if I don't have to.
Thanks!
-Kevin

When I went to export, I went to Size and manually put in a size (that is, I chose Custom and put in a Widescreen ratio. If you search Google for 'Aspect Ratio Calculator' you'll find a java ratio calculator for widescreen and full. I usually use 800 as the width). After doing that, it stretched it out and it works great.

Similar Messages

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Problem with widescreen filter

Hi everybody
I'm working with Final Cut Pro 5. When attaching the widescreen filter to the footage and I'm ajusting the 4:3 picture in the mask, the picture no longer is as sharp as it was without the filter.
I think this had something to do with the realtime in Final Cut Pro 5, since in FCP HD, when I had to render the widescreen filter, this problem didn't occur. (Kind of the same problem seems to be when I create "Text" and attach a normal dissolve which causes a shuttered image during the fade; I solved this problem by attaching the motion blur filter, so FCP5 was obliged to render - and it worked). However this didn't resolve the widescreen problem...
Has anybody an idea on this topic or experienced the same problem? Could this may be a problem with the software?
Thanks for your help
greetz

Thanks for your answer. I wasn't aware of the percentage based issue. If this is the problem, that means that the offset adjusting with keyframes is quite useless since I always have then offsets that reach for instance from -33 to -44, with offstet numbers like -33, -34, - 35...
Is there any solution to this problem to avoid the softness at all? Like recompressing the whole footage after the filter adjusting? Is there actually no problem with the RT; on FCP HD there was no such problem.
I'monitoring externally and I see the softness also on the canvas and also when the clip was exported etc.
thanks

Problem with PDF export and embedded font (characters disappear)

Designer: Crystal Reports 2008 SP 2
Engine: CR4E 2.0 SP2 (runtime_12.2.203)
Hi there!
we found a problem in the pdf export. It seems like there would be a problem with the embedded fonts, the problem is as follows:
Rpt file with, for example only a text box which contains the german string " Änderungs Schlüssel ".
Export the Rpt file with CR4E to a pdf file.
When we open the pdf file in Adope Reader 8, the text appears to be correct,
but if we print the PDF file from the Adope Reader, the text changes to " nderungs Schl sselu201C,
here we are missing ther german umlaute.
When we open the file for example with an alternative PDF reader like Foxit Reader, there they are also missing.
After i found some posts here in the forum, there are people facing the same problem, since i couldn't find a solution in the forum, we build a little workaround for it that works for us.
For all of you that have the same problem here the workaround:
We used the IText JAVA library, this jar can can help as to fix the PDF file so the text is displayed correctly.
Here the code:
ReportClientDocument doc = new ReportClientDocument();
doc.setReportAppServer(ReportClientDocument.inprocConnectionString);
doc.open("C:\XY.rpt", OpenReportOptions._openAsReadOnly);
//... database logon,.....
InputStream inputStream = doc.getPrintOutputController().export(ReportExportFormat.PDF);
inputStream = PDFHealer.heal(inputStream);
//... write the stream some where

The helper class using IText:
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import com.lowagie.text.Document;
import com.lowagie.text.DocumentException;
import com.lowagie.text.pdf.PdfContentByte;
import com.lowagie.text.pdf.PdfImportedPage;
import com.lowagie.text.pdf.PdfReader;
import com.lowagie.text.pdf.PdfWriter;
public class PDFHealer
 public static InputStream heal(InputStream in) throws DocumentException, IOException
 try
 ByteArrayOutputStream out = new ByteArrayOutputStream();
 PdfReader reader = new PdfReader(in);
 // we retrieve the total number of pages
 int n = reader.getNumberOfPages();
 // step 1: creation of a document-object
 Document document = new Document();
 // step 2: we create a writer that listens to the document
 PdfWriter writer = PdfWriter.getInstance(document, out);
 // step 3: we open the document
 document.open();
 // step 4: we add content
 PdfContentByte cb = writer.getDirectContent();
 int i = 0;
 while( i < n )
 document.newPage();
 i++;
 PdfImportedPage page1 = writer.getImportedPage(reader, i);
 cb.addTemplate(page1, 0, 0);
 // step 5: we close the document
 document.close();
 ByteArrayInputStream ret = new ByteArrayInputStream(out.toByteArray());
 out.close();
 return ret;
 finally
 in.close();

Indesign CS5 - Problems with PDF-Export

Hello community,
we do have a problem with Indesign CS5 and exporting data into PDF. It is about that logo on that white surface, which doesnt come along with the rest after the pdf-export. What we did was: We created that white surface in Indesign itself, put an effect on it with the Indesign effect gallery and then imported the logo in the surface ... the logo itself is .psd data. So, if we export it into pdf like that, it is just dissapeared. Does anyone have had a similar problem and what can be done about it?
By the way ... if you put, for example, a simple backgroundshadow on a picture ... done also with the Indesign effect gallery, then you get just a white surface instead of the shadow, after the export into pdf. It does maybe correlate with the other problem ... not sure. Any suggestions?
Thank you very much for your help and kind regards ...

I would create the entire logo, including the white background, in Illustrator, save as PDF and place that in ID.

Problem with Xml exporter

Hi All,
Thanks in advance for ur warm replies.
I am exporting personalizations which i did but iam facing problems with this.
Please help me on this issue.
Steps i follwed.
Step1: exec jdr_utils.listcustomizations('/oracle/apps/ego/item/eu/webui/EGOITEMATTRIBUTEPGL');
It displays me the customizations which i did as follows
/oracle/apps/ego/item/eu/webui/customizations/responsibility/24091/EGOITEMATTRIBUTEPGL
Pl/sql procedure completed successfully.
Step2: Iam now at command prompt on java_top and i run the following command
java oracle.jrad.tools.xml.exporter.XMLExporter
/oracle/apps/ego/item/eu/webui/customizations/responsibility/24091/EGOITEMATTRIBUTEPGL
-username apps -password <mypwd> \
-dbconnection "(description=(address_list=(address=(protocol=tcp)(host=<host>)(port=<myport>)))(connect_data=(sid=<mysid>)))" \
-rootdir "/oracle/apps/ego/item/eu/webui/EGOITEMATTRIBUTEPGL'"
* I don't know exactly what is root directory here. which path i need to provide here.*
Error: No such file or directory.
Thanks and Regards
Zaheer

Zaheer,
<output_dir> - (Required) Output directory where the exported xml file structure is to be stored. You may set this to any directory, however, we recommend that you export your packages or XML files to $APPL_TOP/personalizations.
If you run the export tool for the package
/oracle/apps/ak/dem/webui/customizations/site/0/REQORDERSTATUSPAGE and specify -rootdir
$APPL_TOP/personalizations, the xml file is saved as
$APPL_TOP/personalizations/oracle/apps/ak/dem/webui/customizations/site/0/REQORDERSTATUS PAGE.xml.
In your case define rootdir as rootdir "/oracle/apps/ego/item/eu/webui ".
Thanks
--Anil

SSRS 2012 problem with excel export

Hello
I updated SSRS 2005 up to SSRS 2012. When I exported report in excel (xlsx) I got following warning :
"We found a problem with some conent in 'filnename.xlsx'.Do you want to try to recover as much as we can? if you trust the source of this workbook,click yes"
After Pressing Yes Button
"REpaired Recors: Cell information from .xl.worksheets.sheet1.xml port"
15
0.00000000000000000000 this is in string format instead decimal
2
0.00000000000000000000
This heppens if i have decimal(38.20) variable in table and record value is 0.
To avoid this problem i must change report and use this expression
=IIF(Fields!SomeValue.Value = 0, 0, Fields! SomeValue.Value)
for value in report, but this is not sulution for me because we have more then hundred reports.
Is any other solution?

Hi LashaGurgenidze,
The issue seems to be related to the Excel 2010 or the Excel 2007-2010 rendering extension in SSRS 2012. If possible, I suggest that you keep the Office 2010 and the SQL Server 2012 up to date, and check the issue again.
In order to solve the issue, we can enable the Excel 2003 rendering extension in SSRS 2012, and use this render when exporting to Excel. We can modify the EXCEL render extension in the rsreportserver.config file as follows:
<Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
Then, the Excel 2003 render extension will be available in the Export drop-down list.
By default, the file is located in: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer. Before we modify it please backup the rsreportserver.config file.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

IPhoto problem with email, export, editing...

Had my iMac upgraded with a new harddrive and Lion at my authorized retailer & service center. All has been good but did not use iPhoto much after the upgrade, but all seemed to be good.
Recently photographed a family occasion and now I experience the following problems;
1. After successful import I edit the pictures which leads to numerous crashes, seemingly randomly, but most frequently when jumping from editing one picture to the next.
2. Share, Email does not work, only a few of the selected pictures are sent, sometimes with a low resolution thumbnail instead of the desired picture. The selection process works normally, but when the mail has been formatted only a few or none picture are inserted, in any of the templates, including classic. The number of selcted photos and their size are reported normal, they just don't show up in the mail itself
3. Resorting to export to a folder, all of the pictures are exported, however not always with intact changes/edits???
I have previously never had any major problems with iPhoto up until this version, and am seriously considering ditching it after all the wasted time.
Any suggestions how to attack this problem in iPhoto 11 & 10.7 Lion? (I am unable to find any plist etc like in 10.6 and earlier)
Thanks for any hints and/or tips...

Hi Larry,
thanks for your quick reply...
The harddrive and all user data was transferred by the authorized service center. I able to see and use all the old pictures, so I think (and hope) my pictures were correctly transferred.
After reading this:
https://discussions.apple.com/thread/3087683?start=45&tstart=0
and done minor edits to ALL the NEW (of today) pictures I want, it seems to file, export correctly. I did some additional minor adjustments (exposure, saturation, sharpness, etc) and behold, the export worked ok, including edits like crops, straightenings, etc, that were omitted without the "adjustments"...
It feels like some proper bugs to me, and will probably look for another more robust and flexible software to do my edits...
Recommendations?
Using Picasa sometimes, but read somewhere they use a hack to get to the iPhoto pictures & database, not sure I like that... Maybe I should go Aperture...???

Problems with Importing / Exporting Keywords and Meta Datas

Hi to all!
I recently upgraded to Aperture 3 and upgraded my referenced library.
Today I opened the Keyword HUD and noticed some keywords splattered in my list, which seem to be any older ones, since the new numbering indicated that they are not applied to any pictures.
So I deleted them.
Than I noticed the <Imported Keywords> folder, opened it, and it contained also a large number of previous keywords. Also they seemed not to be in use, so I also removed them.
Than I locked the Keyword HUD.
Now my question: If I export a version, with the option for 'include metadata' ticked, and edit the version than in Photoshop, and after it, import it back into the Aperture library I do have the problem.
I have tried 'Import Meta Datas' and and click 'Append'. Than it is recognizing the former keywords, which I would appreciate, but not as 'Imported Keywords'.
If I would open the file w/ the External Editor and return it back, I guess I would not have this problem. Usually I do open the referenced RAW file, and import than the edited version back into Aperture. Keywords are stored in the Library, so I would not avail the former given keywords than, is that right?
By the way are the keywords part of Meta Datas or not?
Are there any workarounds?
And had other people also problems with their keyword list after upgrading?
Thank for any ideas / infos!
Michael

Added header to CSV and to Code
$ImportFile = Import-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv" -Header Computer
foreach ($Computer in $ImportFile){
$path = "\\$Computer\c$\Epic\bin\7.9.2\Epic Print Service"
$xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullService//Cleanup | Select -ExpandProperty Node
if ($xml.ArchiveHours -eq '12' -and $xml.DeleteHours -eq '120') {
$Compliance = $True
}Else{
$Compliance = $False
} "$Computer","$Compliance" | Export-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Results.csv"
Results:
select-xml : Cannot find path '\\@{Computer=SW1412-16985}\c$\Epic\bin\7.9.2\Epic Print Service\EpicPullService.config.xml' because it does not exist.
At C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Check_PullServiceXML.ps1:4 char:8
+ $xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullServ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (\\@{Computer=SW...vice.config.xml:String) [Select-Xml], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SelectXmlCommand
If it is not a CSV file then just get it with Get-Content
Get-Content C:\Users\UserName\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv |
 ForEach-Object{
 $computer=$_
 $path ="\\$computer\c$\Epic\bin\7.9.2\Epic Print Service\\EpicPullService.config.xml"
¯\_(ツ)_/¯

Problem with column export

Hi ,
I have a column in a report that I want to include in the csv export.
The column has a "Column Link" pointing to some other page in the application.
I tried setting field "Include In Export" to "Yes" and applying the changes. But when I see the column again, this field shows "No". I have tried this many times but every time, this field gets reset to "No". I am not able to export this column to csv export file.
Is there any problem with exporting columns with "Column Link"?
~Ketan

That problem is being debated, see: Include in Export does not work in APEX 3.1 .
Scott

Problem with video export for Pro Tools

I hired a re-recording mixer to mix my short film in 5.1. I successfully exported an OMF, and then set to making a video per his requirements: h264, 720pHD, High Quality.
Initially I chose an h264 YouTube 720p 23.976 preset. The re-recording mixer told me although it would open on his desktop in a quicktime player, he couldn't get it to load into Pro Tools. So, I next created another video with the h264 HD 720p 23.976 preset. And again, he couldn't get it to load.
As the export is quite long, I decided to re-compress the file in Apple Compressor. And here's the weird thing. The exported HD 720p 23.976 video wouldn't even load in compressor (although it plays fine in Quicktime).
Finally I used an Apple TV preset and exported again. 720p, 23.976. And this time, the video loaded both in Pro Tools and would open in Apple Compressor.
What don't I understand? Why the difference between h264 outputs? What would the ideal "preset" be?

I have always found that a simple .dv file is the most user friendly in a ProTools Suite.
I use these in conjunction with OMF exports of audio and it works flawlessly.
I am on a PC so not sure how that impacts in your Mac workflow.

Problem with CR exporting and Excel formatting/merging

I'm currently running Visual Studio 2008 (Version 10 of CR). We have a Winforms application that runs various crystal reports I can't say there's anything particularly sophisticated about it. Just slap the report in a viewer, pass in the parameters, and run. As I've mentioned elsewhere I have not done much with CR (or Excel for that matter).
The problem is this. Our client is exporting certain reports to Excel, the 'full' version if that's the right term, not the data only option. The first field on every line of the detail is a text object consisting of several fields, concatenated. These fields combined form an ID number that we want to sort by. Unfortunately, so they tell me, this is currently impossible because in the export, the number occupies two columns and they are not merged. (Actually it doesn't look like any of the report columns bear any relation to any of the Excel columns.)
I always thought Excel export was one of those black box extras.
Now I have to ask, is there any way to customize it, programmatically or otherwise? (Am I overlooking any options?)
(Digging a bit deeper, could there be something in the CrystalDecisions API that I could use? Not sure I see anything useful in the ExcelExportOptions object yet.)
Edited by: BChernick on Jul 8, 2011 3:09 PM

[SAP Crystal Reports Design|SAP Crystal Reports; forum.
- Ludek
Edited by: Don Williams on Jul 8, 2011 11:05 AM

Big problem with PDF export from CS4

Create a document with facing pages. Then place a rectangle or any other object on the master through the whole spread. Place the text or any other object on the master over the first rectangle on the both pages. Now, when exporting pdf, the text on the left pages is disappeared becaouse it covered by the copy of the rectangle. The variation of the problem is when using any tansparencies, then they become "less transparent" on the left pages because of this strange dublicating.
There is an archive in attachment that contains indd and pdf files with this problem.

Thanks, it works, but bug is still bug. In some cases it's impossible to do this, for example my recent case: it was text with huge outer glow on master pages. Outer glow from right page dublicates to the left and covered left text, and there's no way to move effect to another layer separately. The solution was to detach these texts from masters, but it's also unhandy solution.
It's hard to detect such cases unless it happen with big elements.

Problem with image export to epub when I work with ID cs6 (update)

I creat a document and I select the page size as ipad，and later I export it into epub，put it my ipad（ibooks）
but the problem comes，the image size is not right in my ipad
for example，i set image width as 50%，and it looks good in adobe digital edition，it‘s 50% width.
but it's 100%(or some percent) in ipad(ibooks)
i delete the cs6 version and install cs5.5, recreat a document,the problem has gone.
but when i open the documnet with cs6,the problem comes again.
please fix the bug.Thanks a lot.
I‘ve found what’s wrong with cs6
in the xhtml file，cs6 describe the image as this
<img alt="A1.jpg" class="frame-1" src="../Images/A1_opt.jpeg" /> 
but in cs5.5，it‘s this
<img alt="A1.jpg" class="frame-1" src="../Images/A1_opt.jpeg" width="50%" />
so，we can find cs6 missed the style width="50%"
that’s why the image dose not be the size I've set when I see it in my ipad
It's a unforgiven mistake. so can anybody report to Adobe to fix it??!!
Message was edited by: zhanghami

Does your anti virus program filter spam or junk mail? does your mail provider? are these accounts IMAP or POP?

Problems with jpg export and color profiles

I browsed the forum but I didn't find any recent thread about the issue I'm experiencing right now, I wonder if it's common or it just affects me. Mavericks, Aperture 3.5, all up-to-date.
I imported a RAW file (I tried with both a Nikon and a Sony camera), made a few adjustements and then exported the picture as a jpg. It looked good in the Finder, in Photoshop, in Preview. When I uploaded the file to flickr, everything was ok.
Then, I browsed flickr via its iOS app and - surprise - the image is completely wrong: colors are washed out, desaturated, with an awful greenish dominance. I tried a few things and discovered soon that also opening the file on my Mac with GraphicConverter has the same ugly result. Same with the iOS version of Safari.
I use ProPhoto RGB as my default color space in Aperture. I changed to sRGB: same result. I changed to AbobeRGB and te output is finally consistent through all the platforms and apps.
Too bad I managed to do this only for one photo because, even if I changed the settings, every other photo I exported is still sticking with ProPhoto RGB. The problem is surely here because I solved it changing manually the color space to AdobeRGB with Pixelmator and re-saving the images one by one. But of course this cannot be a successful workflow...
Any experience about this?
Thank you!

OK, I can reply to myself. The issue has mysteriously gone away - no idea why. Edit: The issue is gone on Desktop, with GraphicConverter. From iOS, pictures still look weird.
About the exported default, my bad: I was using presets and they choose their own settings for color space. Still, no idea why the first one was exported in Adobe RGB instead of ProPhoto RGB (the default for "JPEG - fit within 2048x2048").
Message was edited by: difool

Problem With Widescreen Export

Similar Messages

Maybe you are looking for