Problem with WIndows 7 and Internet Explorer 11

I have Windows 7 Pro and just completed installing Service Pack 1. I checked the the System information and it indicates that the Service Pack did in fact install. I am now trying to install the latest version of Windows Explorer 11 and when
I try, I get a message that states "Operating System is not Supported" "you need Windows 7 SP1 or Server 2008 R2 SP1 to install Internet Explorer 11.
I have worked on this problem for about six hours. Reinstalled Service Pack 1 and anything else I can think of. I can't get Internet Explorer 11 to install. I use GMail and it is advising me that I need to upgrade to the lates version
Internet Explorer.
Can anyone give me some advice?

Which version of Internet Explorer are you currently running? And how are you trying to install IE 11?
Although there are standalone installers for IE, it's usually best if you can install it through Windows Update. From memory I think IE 11 can only be installed on top of IE 9 or 10.
Please can you open Windows Update, and click Check for updates. Once this has finished checking, look in both Important and Optional updates, and see if an updated version of IE appears.
Regards,
James Henderson
MTA: Windows Server Admin Fundamentals
MTA: Networking Fundamentals

Similar Messages

Problem with ACE and Internet Explorer 8

I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
exactly:
ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
Please help.

Hi Kazik,
Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
A showtech from the Admin context of the ACE
A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
Regards
Daniel

Problems with iweb and Internet Explorer

I'm having trouble with my iweb website - PC users using Internet Explorer can access my site home-page but find the navigation bar is blocked - covered by a green rectangle which does not allow the links to be explored. With Safari and Firefox the website works properly. Has anyone else experienced this?

Transparency (opacity in CSS) is one of those things that's used by those who know nothing about it or those who know a lot about and is best avoid by all the rest of us!
To create a class "transparent" to cover all bets would require something like this...
.transparent {
          /* Required for IE 5, 6, 7 */
          /* ...or something to trigger hasLayout, like zoom: 1; */
          width: 100%;
          /* Theoretically for IE 8 & 9 (more valid) */
          /* ...but not required as filter works too */
          /* should come BEFORE filter */
          -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
          /* This works in IE 8 & 9 too */
          /* ... but also 5, 6, 7 */
          filter: alpha(opacity=50);
          /* Older than Firefox 0.9 */
          -moz-opacity:0.5;
          /* Safari 1.x (pre WebKit!) */
          -khtml-opacity: 0.5;
          /* Modern!
          /* Firefox 0.9+, Safari 2?, Chrome any?
          /* Opera 9+, IE 9+ */
          opacity: 0.5;
For modern browsers we can use this...
.transparent {
          zoom: 1;
          filter: alpha(opacity=50);
          opacity: 0.5;
But how do we know what our visitors are using?

URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
Carlos

Hi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

How to make 32-bit-only add-ons work with Windows 7, Internet Explorer 11 and Enhanced Protected Mode enabled?

Hi everybody,
in IE10 I had the chance to use 32-bit-tabs even with EPM. In IE11 my 32-bit add-ons are all marked as "incompatible".
Do you have any suggestions?
Regards, Don

Hi Don,
The ”Enhanced Protected Mode ” feature of Internet Explorer 11 in Windows 7 has been simplified and it doesn`t provide the “Enable 64-bit processes for Enhanced Protected Mode” feature. The Enhanced Protected Mode is based on the 64 bit process.
So that may be the reason.
Here is a link for reference of Enhanced Protected Mode :
Enhanced Protected Mode
http://blogs.msdn.com/b/ie/archive/2012/03/14/enhanced-protected-mode.aspx
Here is another link for reference(Pay attention Windows 7 part in the end) :
How Internet Explorer Enhanced Protected Mode (EPM) is enabled under different configurations
http://blogs.msdn.com/b/asiatech/archive/2013/12/25/how-internet-explorer-enhanced-protected-mode-epm-is-enabled-under-different-configurations.aspx
Best regards

Site problems in Firefox and Internet Explorer

Here's my site: http://davesnowgraphics.com/DSG/Home.html
Created in iWeb '08. Here is a list of problems. Solutions welcome.
1) In all browsers: links to internal pages open up in a new window or tab. As an internal link, the option to "Open page in a new window" is not even available. I therefore assume that they should open in the same window, but most open in a new page or tab.
2) In Firefox (both Mac and PC) the text spacing is messed up. Throws spaces in the middle of words and generally stretches text or letter spacing, making text returns seemingly at random. The fonts are all supposedly web safe (Trebuchet MS and Times New Roman).
3) Site is TOTALLY jacked in Internet Explorer. Transparency of linked images dumped, making intended graphics solid white. Also on the PC (I don't have the Mac I.E.), my text gets hijacked by random text links with those annoying pop-up boxes that lead elsewhere.
Is it possible for an iWeb-generated site to work in commonly-used browsers, or do I have to learn Dreamweaver?

Okay, so I did some code experimentation and solved everything in my last post inquiry.
Seems the entire line *onclick="window.open(this.href); return false;" onkeypress="window.open(this.href); return false;"* needs to be removed from the javascript that iWeb generates when you have a link associated with a graphic. Pain in the butt, but it works.
Also did extensive searching for title= and manually changed the following text to what I wanted it to be.
I'm interested to know if these issues are resolved with the iWeb '09 update. Anybody know?
I also removed the graphics that I was using as links on the cubes. I put simple square shapes in the middle of the cube sides, made them transparent and assigned the link to them. They don't map the entire cube side as a link, but enough to make it functional. Also, for some reason, the fact that they're native iWeb-generated shapes and not placed graphics, they open up in the same page without having to delete the code line mentioned above.
Still no solutions to the following I.E. issue in my initial post.
I have the site open on my PC right now in IE. If you go to About > Services, the words "Business", "communication" and "Project Management" are green with double underlines. If I roll over them, I get a popup window with an advertisement for GameVance. What's up with that? Is that a setting in my local Internet Explorer properties that I need to disable?

Firefox is scaling down the photo sizes, along with chrome and internet explorer but Firefox's photos are usually smaller

I sell products on a site, along with other sellers, that is owned by someone else.
We have many sellers there. Some of us are having problems with how we are able to view the size of our photos taken of our products that are up for sale.
From seller to seller, we have different versions of Firefox that we are using. I have the newest Firefox, which I believe is 4.
I was having, like others who use 4, the same problem seeing smaller photos before I did the upgrade as well.
It seems to be the case for most of us who are having the problem, that Firefox photos scale down smaller than Internet Explorer and Chrome.
We have been told that this may be a browser issue as the site owners say they have not made any changes. At this point we are unsure since there are so many variations from seller to seller (keep in mind that some sellers are not seeing the photos scale down through their computer).
We have asked the site owners to look into this problem further. I also wanted to see what the Firefox community had to say. Do you think it may be a browser issue? We would greatly appreciate your input.
Below are some examples of photos that have been scaled down for the sellers who are seeing a problem with smaller photos while both in Firefox; all using different versions of Firefox:
One photo that was originally the size of 419px by 1, 007px is being seen by one seller to a scaled down size of 81px by 64px.
Another seller is viewing this same photo scaled down to 163px by 329px.
Another seller is able to view this photo as the original size it was intended to be, which is 419px by 1, 007px.
The above scenario has been the worst scaled down size we have heard of so far.
Typically a photo that is the size of 1, 000px by 930px has been scaled down to 420px by 391px.
There are other examples as to size, but you can see that the photos have been scaled down quite a bit.
You can see that it has been scaled down to less than half of the original size. This can pose a real problem for us depending on the type of product that is being photographed.
Thank you!!

Thank you!!

Problems with Measurement and Automation Explorer (MAX)

Hello LabVIEWers,
I have been having a serious problem getting MAX to start and to remain stable. Here are the specifics:I am running LabVIEW 8.5 Full Development System on a Dell PC with 1GB of RAM and plenty of hard drive space. The OS is XP Pro and I also have McAfee Enterprise Virus Scan software. MAX will start-up and appear to run for a few minutes and then the software bombs out. I get a "Measurement and Automation Explorer has encountered a problem and has to close" pop-up message. To fix the problem, I have uninstalled all NI software using MSI Blast. I have wiped the registry clean of NI keys as per instructions in previous posts. I have deleted any remaining NI software on teh hard drive including C:\program files\national instruments and C:\Documents and Settings\All Users\Application Data\National Instruments. I have then restarted the machine and did a complete fresh install from CD's, DVD's, and the harddrive (CD's written to hardrive and DVD written to harddrive first). I installed first the LabVIEW and then I installed the Device Drivers. I restarted the machine between installs. I have even installed the updated NIDAQ 8.6. After which I set protections on the NI directories to read/write. Ok, basically I have done all these things numerous times and I still cannot get things to work correctly.
I was able to get into MAX for a little while (it is somewhat stable immediately after a fresh reinstall). I defined 4 Simulated DAQmx devices and none of them acted like they were simulated. I received various errors saying that the device was not found or could not be started. So I basically could not run my software with the simulated devices. LabVIEW sometimes seems to work ok but just now, I got a "Error loading nidmm_32.dll, initialization routine failed" error. I also get the same error for nilvaiu.dll. Both of these DLLs are in the C:\Program Files\IVI\Bin and c:\windows\system32 directories respectively and prior to the last time I started the software, all worked ok with LabVIEW.
Is my computer failing? Are there any other options to getting this installed without probems?
Please help.
Michael Froehlich

Duplicate Post
Keep discussion here
National Instruments
WSN/Wireless DAQ Product Support Engineer

Having a problem with iTunes and internet radio. The programme keeps changing stations

I'm abroad at present and using a wireless connection at the lab. Itunes keeps changing internet radio stations as a function of time,
Any suggestions or os it a known problem with the current version?
Don

Try the following user tip:
"Invalid drive X:\" install errors

HP 15-n086sl problems with windows and drivers amd

Hello to all,
I have a problem with my HP 15 - n086sl .
With native Windows 8 did not.
the problem is the following :
moving from windows 8 to 8.1 I lose the switch graphics cards.
I mean : if I click with the mouse on "configure switchable graphics cards " I get out of a window that says " Unable to start Catalyst Control Center. currently there are no other settings to configure with CCC"
I tried to update the drivers with the ones on the HP site for windows 8.1 , but nothing changes .
From " Device Manager " I noticed that the drivers you have installed AUTOMATIC moving from windows 8 to 8.1 are the same version as on the hp website .
[url=http://postimg.org/image/t3xa7aem3/][img]http://s17.postimg.org/t3xa7aem3/driv.jpg[/img][/url]
If I install the drivers from the AMD website I have the following problems :
the switch returns to work but hibernation no longer works and if the screen of the PC goes into standby by moving the mouse or pressing both buttons it never recovers . I have to turn off the computer by holding down the button.
I've done several searches for the web, even within the forum but have not found the solution.
Will you help me ?
Sorry for my English.

Sorry for the delay!
I am Italian and hp does not offer more support than this forum.
How should I do?

Please help... Problems with windows and bluetooth

Hi,
My computer has been working without a hitch for the past 3 months but just recently i bought a bluetooth mouse to use with mac and windows. But then I noticed that there are some major issues now.
I have a Bluetooth devices icon in my control panel (actually two of them, i dont know how that happened) but in the device manager, there is no apple bluetooth kicker. No bluetooth hub at all. So I dont know if the driver actually installed or not.
Then, I try booting back up the macintosh drivers for windows cd to use the uninstall, but it can't uninstall. It only installs. I tried uninstalling through add or remove programs and it still just installs over again.
Please, somebody help me. I'm about to rip my MBP a new one.
Thanks,
Phong

Installed new boot camp drivers. Works perfectly now.

Problems with modalPanel in Internet Explorer and Safari

Hello there,
I am working on a JSF (Richfaces) application. To handle advanced searches and confirm boxes I am using the richfaces modalPanel dialog, which uses Ajax. There are a number of re-rendering problems.
1. First of all, any errors won't display in any browser (including Firefox). From what I can tell it has to do with it refreshing the page before the error message can be displayed in <h:messages />.
2. In Safari and IE there is no refresh for advanced search dialog, where the modalPanel shows, but does not seem to call the search action and rerender the list. It's almost as if it does nothing. In IE it closes the dialog, but does nothing. In Safari it doesn't even close the dialog. I'm assuming this is relating to the JavaScript the RichFaces library uses. Any ideas??? I'm nervous to change frameworks at this time since I am in the last leg of the project.
Here's a code example of the advanced search, which does not refresh the list screen.
Code:
<rich:modalPanel id="advancedSearch" width="220" height="420">
             <f:facet name="header">
                <h:outputText value="#{msgs.advancedSearch}" />
             </f:facet>
             <f:facet name="controls">
                     <h:graphicImage value="/images/btn_logout.gif" width="15" style="cursor:pointer" onclick="Richfaces.hideModalPanel('advancedSearch')" />
             </f:facet>
               <h:form>
                    <a4j:commandLink action="bookList" reRender="bookList"   oncomplete="{Richfaces.hideModalPanel('advancedSearch');}" >
                         <h:graphicImage class="searchIcon" id="advSearchGraphc" value="/images/btn_search_UP.gif" alt="#{msgs.search}" />
                    </a4j:commandLink>
               </h:form>
         </rich:modalPanel>     As you can see I am calling reRender="bookList" which is the id of the datatable. From what I can tell the problem is something to do with the javascript not running properly on IE and Safari.
<rich:dataTable width="644" id="bookList" rows="12" value="#{Book.list}" var="book">     How can I get around this?
Any pointers would be hugely appreciated.
Jared

I suggest you to post your question in the JBoss RichFaces forum, good luck!

Problem with windows and variable in smartform

hi guru,
i create smartform for printing tax document and found problem.
1)
i create layout in form like this.
       {Main Window}
               <<<< Data to print
       <<<< secondary Window
       <<<< secondary Window
with many data in table, so this form will take 10 page up to print. i found and showed in every page.
in my solution *i want to display and on last page after {Main Window} Only*. how to resolve this.
2) follow to 1st question, can i place position of each window in dynamic? +like 's position is under {Main Window} 2 cm.+ instead of specific position left margin , upper margin *or should i create other page and place and .*
3) i create 2 variables (sum1 type p , sum2 type p ) for keep sum of tax in table that show in each page and write it at end of each page. i want to clear data in these 2 variables when system create new page and start to keep sum of value again. i create program line node under {Main Window} after but don't know which code or syntax to write.how to code this?
regards,
Kittisak.

1) On the 'Conditions' tab of your WIndow3 & WIndow4 just click the check box
'Only After End of Main Window'. It will always be printed at the last after your main window is finished.
2) And if you don't want your window3 & window4 in a fixed place than instead of new windows do the same thing inside your main window creating a new template or anything as per your requirement and place it after your main table.
3) For clearing the fields, do it like this, in the program lines write the code below:
IF G_PAGE NE SFSY-PAGE. " declare g_page with initial value '0'
    CLEAR field1.
    CLEAR field2.
    G_PAGE = SFSY-PAGE.
ENDIF.
With luck,
Pritam.

Problems with Windows and Random Crashes

For the past two days I have been having tons of problems, since I finally got around to running the security update (2006-008). I've been having loads of random crashes, most commonly from Safari, Finder and iTunes. Safari crashes usually when I close a window or interact with certain flash things. It also fails to draw the window when I close the second-to-last tab (leaving one tab), giving me a big white square that I have to close. Otherwise, random window elements (such as bookmarks bar, address bar, etc.) will disappear at random, or will be horribly mis-sized.
Finder just quits whenever it wants, I have yet to find a common thread between crashes.
iTunes crashes usually when I play a video, but also sometimes when switching from the store to a playlist, or to the library. It also suffers occasional redraw problems similar to Safari, though not as bad. Garage Band does too.
Here's the output from the last iTunes crash, if it provides any clues:
EXCBADACCESS (0x0001)
KERNINVALIDADDRESS (0x0001) at 0xffffffff
Thread 0 Crashed:
0 GetPatternIdentifier + 211
1 SetPortPat + 103
2 BackPixPat + 42
3 DataEngine::ApplyBrush(TTheme*, short, unsigned char) + 76
4 SetThemeBackground + 836
5 SetThemeWindowBackground + 292
6 NewFeaturesDialog + 202
7 CreateDialog(Rect const*, unsigned char const*, unsigned char, short, OpaqueWindowPtr*, unsigned char, long, char**, ColorTable**, char**, char**, unsigned long, unsigned char, AutoPositionInfo) + 175
8 GetNewDialog + 173
9 0x1000 + 1686314
All of my crashes have been EXCBADACCESS (0x0001) ones.
Please help, as this is a nightmare to deal with.

That error usually comes up as a result of faulty RAM. Did you buy any chance upgrade the RAM in your iMac? If so, verify that the chip is seated properly and that it is supported for your iMac.

Problems with graphics and Internet connection - iMac 2011 with Lion

First: sorry about my english... It is terrible! lol
I have an 2011 iMac, purchased in June 2011 in the USA. I brought the iMac to Brazil.
Sometimes when I turn on my iMac, the graphics are horrible and can not connect to the Internet. When this happens, I have to restart the Lion.
Apple introduced the "iMac FW Graphic Update 3.0". The information says clearly that supports Brazilian Portuguese. Butwhen I install, an error appears: "this software is not compatible with your system".
My Lion is in Brazilian Portuguese. Why it is not compatible? How do I install it? How can I solve this problem?
Note: The technical assistance of Apple changed the HD, according to recall made by Apple through the site. The HD is new.
Thank you very much!

Anybody? I'm buying a new network card simply but I'm not sure that it is the network card that is causing the network problems I'm experiencing.
Regards
André

Problem with WIndows 7 and Internet Explorer 11

Similar Messages

Maybe you are looking for