Problem with windows server 2012

i have a problem with window server 2012 , i remove some feature in server manager and it restart .but when i log in into my account it shows a black screen with cmd window with this massage "C:\users\Administrator>." please
help me. i dont know whats happend and i cannt work with this
thanks a lot

You may follow this link to get it solved
http://www.jon-tupitza.com/2014/02/18/enabling-the-windows-server-2012-r2-gui/
http://www.arabitpro.com

Similar Messages

Trying to install a setup on a 64 bit machine with Windows server 2012 R2 which writes to registry FAILES

My msi is a 32 bit setup.
When I install it on a 32 bit machine with Windows XP it works fine .
I tried to install it on a 64 bit machine with windows server 2008 and it succeeds
While running my setup on a 64 bit machine with Windows server 2012 R2 it failes and I get the folloawing message:
"Registry object reference not set to an instance of an object"
Then the setup exits and leaves the app partially installed
I tried searching for known problems over the net, but found nothing
I will be happy to get some advice
Thanks
Liora

Sounds like you are trying to update a registry object that is not there.
Is this your own msi, or is it from a third party application? If third party, check with them to see if they support it on 2012 or if they have a known workaround.
If it is your own msi, sounds like it is time to debug it.
.:|:.:|:. tim

Licensing issue with Windows Server 2012 R2 Essential

Hi,
we purchased a server that came with Windows Server 2012 Essentials. and we found out some of the issue regarding the licensing. I would like to verify it with the experts here.
1. This Essential O.S. cannot be deployed as a member server in the domain, only Windows server 2012 r2 Standard and data center is capable as deploy as a member server?
2. does it work with a single domain with multiple domain controllers and one primary domain controller? Example, 10 offices in different states, each location has a domain controller in their office, I'm installing to install this Essential server as another
domain controller in one of the offices for redundancy purpose. I promoted this server into domain controller with success, but it gives me an fsmo error everyday, and warning about shutting down if i don't transfer the fsmo role to this server.
3. which leads to this question, so this Essential OS can only be deploy as a single domain as the primary domain controller? Up to 25 user and 50 device license?
4. Is it possible to deploy it as a domain controller (that office has less than 25 users) in that office while syncing correctly with the other 10 domain controllers in other offices, they are all in the same single domain? I can't make this work, and I
think due to the Essential O.S.'s limitation.
5. we use a vpn connection to connect all the office together, and all the domain controller uses lan ip address to communicate with each other.
Thank you for the help in advance. I have been researching for the past couple days, but I still couldn't get a clear answer. Thank you again.

Hi Cliff,
Thank you for your reply.
1. We will get a new server 2012 r2 standard to deploy as member server.
2 and 3. Only ONE domain controller can hold all FSMO roles in a single domain, correct? Currently an windows 2003 enterprise, this is our first server in our domain, it holds all the FSMO roles currently.
4. Yes, we realized essentials will not work for us, so we are switching to 2012 r2 standard to deploy for the new
domain controller for our new office, still under the same domain.
5. This wasn't a question, just wanted to give out the connection information.
The problem was that We didn't read the Essentials in detail when buying the new server, on dell website, it said it was perfect for small business, we didn't know it has to run as a primary DC. it was great in price, and it doesn't need CALs.
but we quickly realized after deploying it as a DC, it gives us error about Server Licensing compliance, and will shut down automatically. Then we were going to use it as a member server to run application, and realized we couldn't. So we are returning the
server, and getting a new one with standard r2 2012 and CALs license.
It was a costly mistake.
Thank you again.

Backup Problem with Windows Server Backup

Hello,
we have problems with Windows Server Backup Feature.
Our system is a Windows Server 2008 Standard. On the computer runs a SQL Server 2005.
Since several days no backup can be carried out. We get the error message:
- Error during a Volume Shadow Copy service operation. Detailed error: Failed to process the volume shadow copy: "0x800423F0".
- Errors in the event log: For the started backup an error occured. The volume shadow copy operation was not successful. Error code: "2155348129". Run the backup again after the problem was fixed.
We have already tried to restart the services, uninstalled the Windows Server Backup Feature and reinstalled it, also we rebootet the server several times. Unfortunately, so far without success.
What else can we do respectively where could be the problem?
Kind regards
Sven Otto
KRK ComputerSysteme GmbH (Germany)

Hi Sven,
Please check if there a system partition that is created on the server. If so, assign a drive letter on the partition to check the results.
For more detailed information, please refer to the article below:
Volume Shadow Copy Error 0x800423f0 - writer error: inconsistent snapshot
http://kb.backupassist.com/articles.php?aid=2995
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard

Hi,
Is SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard.
In volume licensing portal Windows Server 2012 R2 Standard is not provided in the list of OS supported for SQL server 2012.

Hi Ajit,
Besides other post, please also note that
Service Pack 1 or
a later update is needed for the support of SQL 2012 on Windows Server 2012 R2.
For more details about how to use SQL Server in Windows Server 2012 R2, please review the following KB article.
http://support.microsoft.com/en-us/kb/2681562
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Microsoft SQL Server 2012 Performance Dashboard compatible with windows server 2012?

Is Microsoft SQL Server 2012 Performance Dashboard compatible with Windows Server 2012? I only see Windows Server 2008r2 as the most recent version in the System Requirements list. Thanks!

Is Microsoft SQL Server 2012 Performance Dashboard compatible with Windows Server 2012? I only see Windows Server 2008r2 as the most recent version in the System Requirements list. Thanks!
As per download documents supported windows versions are
Windows 7, Windows Server 2008 R2, Windows Server 2008 Service Pack 2, Windows Vista Service Pack 2.
I cannot see any mention of Windows server 2012 in system requirements
See System Requirements
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Is ATG 9.x and 10.x compatible with Windows Server 2012?

Is ATG 9.x and 10.x compatible with Windows Server 2012?

No, its not supported. Only Window 8 is supported.
Peace
Shaik

CF11 install problem on WIndows server 2012 R2

We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine. cfm files will not serve up in the default directory, but IIS shows htm files fine. CF administrator runs fine.
Web Server Config tool will only show "None" in the IIS Web Site box. The usual CGI, APS, etc have been installed on IIS. In fact IIS and CF11 have been reinstalled. wsconfig.exe manual run shows no errors.
The problem is that any call to a cfm template results in an error (html pages serve fine):
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Detailed Error Information:
Module       IsapiModule
Notification       ExecuteRequestHandler
Handler       cfmHandler
Error Code       0x8007007f
Requested URL       http://localhost:80/default.cfm
Physical Path       C:\inetpub\wwwroot\default.cfm
Can anybody give any suggestions for troubleshooting? No logs seem to show any information that helps.

Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
2) reboot
3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
4) restart IIS and CF
5) Set Web Server Config to "All"
60 restart IIS and CF
The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

SAP Mobile Platform 3 compatibility with windows server 2012

Dear All,
As per SAP release notes Window Server 2012 is compatible with SMP 3.0 but after installation i see that the SMP3 Services are always into the hung state meaning they neither start nor stop. They are always in the starting state. Whereas it runs fine with Windows Server 2008 R2. When we force kill all the process running with SMP3 Service we can stop it but it doesn't start at all.
Has anyone faced this issue till now.
Thanks

Hi Rakshit,
I guess Eric Solberg, Mustafa Saglam can answer better.
Rgrds,
JK
PS: Raise a SAP ticket.
Message was edited by: jitendra kansal

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

SQL Server 2008 R2 Standard - Compatibility issues with Windows Server 2012 R2

Hello,
We used as a test a box on which we installed Windows Server 2012 R2 and SQL Server 2008 R2 Standard Edition. No Service pack was installed. It worked perfect.
Now we try to do it on another box and all of the sudden there is compatibility issue when we try to instal SQL Server. We can still install SQL Server by clicking "Continue without getting help".
Where can this come from? If it is hardware related what are the thing I should look at?
Thanks all

Hello,
Adding to Shanky suggestion, you can perform a slipstream installation of SQL Server 2008 R2 + SP3 to make SQL Server
2008 R2 compatible with the newer operating system, as explained on the following post.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
https://support.microsoft.com/en-us/kb/955392/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

ACS 4.1 support with Windows Server 2012 Domain controller

I am upgrading my Domain Controller / Active Directory from Windows Server 2003 to Windows Server 2012.
In my environment, I am using Cisco ACS 4.1 which is integrated with Windows Server 2003 Active Directory.
Will ACS4.1 will work fine with my new domain controller (Windows server 2012) or I need to upgrade my ACS too?
Regards,
Junaid

Junaid,
ACS 4.x code doesn't even support Windows 2008 R2. Your best bet is to migrate the ACS from 4.x to ACS 5.4 Patch 2 or stay with windows 2003 or 2008 (Non-R2).
ACS 5.4 patch 2 supports Windows 2012 AD.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-4/release/notes/acs_54_rn.html
Regards,
Jatin
**Do rate helpful posts**

Exchange 2003 with Windows Server 2012 DC's only. Migrate to Exchange 2010.

I have the following situation:
An Exchange 2003 SP2 server in an 2003 FFL and DFL domain with 2 Windows Server 2012 DC's. There are no Windows Server 2003 DC's anymore. Exchange 2003 is still functioning properly, but the eventlog is showing me some errors about LDAP which is unable to
find an old 2003 DC.
I know this is not supported, so we want to migrate to Exchange 2010 as soon as possible.
What is the best way to do this? Will coexsitence still work? Do I have to add an 2003 DC's again?
Please advice. Thank's in advance!

Oh thank GOD I found this thread!
I am facing a similar situation:
http://social.technet.microsoft.com/Forums/exchange/en-US/9a8bc14b-1a45-4b8b-ac3a-38d63e66a7da/exchange-predeployment-analyzer-exchange-2010-compatibility-check-does-not-recognize-windows?forum=exchangesvrdeploylegacy
And this is the first post I have seen marked as an answer by a Microsoft Contingent Staff affiliated person.
Thanks Steve and Simon, you have saved me a bunch of grey hairs.
C.
"Time is an illusion, Lunchtime, doubly so..." - Ford Prefect

Get server with Windows Server 2012 R2 or wait for Windows Server "10"?

We are looking to get a new server this year but with Windows 10 coming out shortly/this year, wouldnt it be better to wait until Windows Server "10" is released THEN get the server?
Thank you

Hi,
Windows 10 is the next version of the Windows client operating system. Until now, there is no official information of Windows Server operating system about the version next to Windows Server 2012 R2. You may pay attention to Microsoft official website for
the information about the newest product.
Windows Server：
http://technet.microsoft.com/library/bb625087.aspx
Here is the instruction about Windows 10 Technical Preview for Enterprise, just for your reference:
http://technet.microsoft.com/en-us/windows/dn798751.aspx?ocid=wc-tn-answr
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Using Windows Server 2012 VL Product key with Windows Server 2012 R2

Hi all,
Trying to use a Server 2012 vl product key to active a Server 2012 R2, but running into issues, namely it is not accepting the key. I have read many threads pointing out that different keys are required, but no mention of the process that one needs
to take in order to obtain/swap product keys? Any ideas appreciated? :)

The product key I have is for Windows Server 2012 Standard VL, (It's not a DC).
I have downloaded the evaluation iso for Windows Server 2012 R2 and want to licence it (with a VL), but it is failing with the Windows Server Standard 2012 VL product key.
My question is - am I doing something wrong, or do I need to ask Microsoft to change the product key / buy a new one? - What steps do I need to take?
The product key for WS2012 will not work for WS2012R2. (so, yeah, you're doing that wrong)
WS2012R2 is not a "free" upgrade from WS2012 (it's different to Win8.0 -> Win8.1)
Your WS2012 pkey will work with WS2012. To use WS2012R2 you need a WS2012R2 pkey.
If you want to "convert" an evaluation license install, into a full licensed install, you must match the version (2012 vs. 2012R2) and the edition, and must use DISM as well as the correct pkey.
http://technet.microsoft.com/en-us/library/jj574204.aspx
If you don't have the correct pkey for WS2012R2 already, and you don't have one waiting for you in the Volume Licensing Service Center website, you'll need to purchase a new license for WS2012R2.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Problem with windows server 2012

Similar Messages

Maybe you are looking for